Since re booting and installing FF there is no file / tools / help at the head of the page.
I recently re booted and when installing Firefox back onto my computer, since then the file - tools - help bar at the top of my homepage is not present.
How do I restore this as I have tried this and upgraded to Firefox 4 and this feature is still missing ?.
I had the same thing happen. right click on the little house (Home) icon, and select Menu Bar. That should restore it.
Similar Messages
-
After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .
Hi,
What version of the OS did you upgrade from ?
Anything before OS X 10.8.2 may have an issue if the Logic/Mother board has been replaced and the Serial Number not "flashed" back to it.
In the Apple Icon menu use the About this Mac item.
In the new panel click twice on the line that tells you the current OS level
It will change to the Build number (and alternative count to the OS versions) and then the Serial Number.
If it is missing you need to get it replaced.
(It is supposed to be done on Repair or Refurbishment).
An Apple Store or Apple Authorised Service Provider as the best choices.
There are apps you can download (They are Mac Model specific) but needs careful typing as it is a once only trip.
8:56 pm Sunday; November 24, 2013
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
Message was edited by: Ralph Johns (UK) -
I have just owned a macbook pro and trying to learn things since i have all along used windows laptop. My first question is : when there are two files i am working together, one above the other on screen, how you switch over between the two with key ?
Hi...
Mac OS X keyboard shortcuts
Control-F4
Move focus to the active (or next) window
Shift-Control-F4
Move focus to the previously active window
By the way... since you are new to Mac, click a clear space on your Desktop. You should see "Finder" top left corner of the screen in the menu bar.
Click Help then click Help Center
As an example type in keyboard shortcuts
You can use the Help menu for almost any application on your Mac.
Apple - Find Out How - Mac Basics
For held switching from PC to Mac > Apple - Support - Switch 101 -
working with my 2 FireWire HD i had a crash. the only way to start was a safe start. then id maged to start from a DVD and install a MAC OS 10.3 wich ran 4 some time then the same problem only safeMode. kernel panic by inserting the tech tool DVD, wich produces the following highligted text:
panic(cpu 0 caller =xffff0003): 0x300 - Data access
latest stack backtrace for CPU 0:
Backtrace:
0x0009CC88 0x00D63C 0x00029DAO 0x000BOA10 0x000B4270
proceeding back via exception chain:
Exception state (sv=0x26acd700)
PC=0x2717E900; MSR=0x00009030; DAR=0x00000000; DSISR=0x40000000; LR=0x2717EBE4; R1=0x26AD3AE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x27178B0 0x00344ACB 0x00345970 0x2717EC08 0x2718458 0x00340590
0x003496EC 0x0034B59C 0x0034A6BC 0x000B1DD4
Kernel Loadable modules in backtrace (with dependencies):
com.apple.driver.AppleFWDHC1(3.9.5)00x2717c000->0x271aafff
dependency: com.apple.iokit.10PCIFamily(2.6)00x1e840000
dependency: com.apple.iokit.I0FireWireFamily(3.4.7)00x270dd000
Exception state (sv=0x26abd280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000;R1=0x00000000; XCP=0x00000000 (unknown)
BSD process name corresponding to current thread: kernel_task
so what
greetings from berlinGreetings,
It appears to be a FW problem, possibly flaky case, or drive problem.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons -
I'm having all kinds of problems since loading Lion and I really wish I hadn't bought it yet. Even after the software update today, 1. my modem still won't work, 2. Photoshop Elements produces muddy photo prints, 3. View preferences in windows don't hold, etc. Anybody at Apple listening? Anybody else out there having these kinds of problems?
10.7 was horrible unstable so I waited until 10.7.1 and tried it again. Well I have to say that it is still a defective OS. I am reverting to Snow as we speak from my carbon clone copy.. This is really the worst OSX I have ever used. It gives me random Kernel panics for no reasons, unstable airport and hundreds of small issues that are just not necessary. For instance I can't use QuickTime in Lion to trim a videoclip ( the UI goes mad and the trimslider becomes inoperable and hangs the Player window ) while in Snow it is no problem. Itunes gives me crackling sound when the equalizer is turned on, Graphical glitches in Photoshop, games crashing, Preview.app not working with some pdfs, so I need Adobes reader which I never used before.. It is definately not ripe for mass usage. Might 10.7.2 or 10.7.3 fix it, but not yet.
* and just for the records : the hardware is absoltely ok. Because in Snow it works as it should. ( So many Lion fanbois are talking : "your Ram is defect", defintely NOT. - Lion is defect! ).
Shame on you Apple.
Message was edited by: Sjazbec -
I have downloaded, extracted and installed Elements 12 but it will not open nor can I find the Adobe file in the file where I installed it to.. When I've tried to download and install again it says that the "Object Already Exists." It may exists, but it is not visible in the file or in my list of programs on the Startup Menu.
cactisken
You should not have to uninstall Premiere Elements 12/12.1 in order to install and run Premiere Elements 13 on the same computer unless your computer is overloaded and the computer resources are compromised. Just use one program at a time.
Can you still use 12/12.1 on this same computer that will not let you use 13?
What specific Window operating system are you using?
Let us go through the usual drill...
1. Does the problem exist with and without the antivirus and firewall(s) disabled?
2. Are you using a pen and tablet device instead of a mouse?
3. Did you install the program with antivirus and firewall(s) disabled?
4. Disable the SLCache Folder found in Windows 7, 8, or 8.1 64 bit
Local Disk C
Program Files (x86)
Common Files
Adobe
and in the Adobe Folder should be the SL Cache Folder that you delete or disable by renaming the Folder
from SLCache to SLCacheOLD.
5. Are you running the program as Administrator and is the latest version of QuickTime installed on the same
computer as Premiere Elements 13?
Let us start here and then decide what next.
Thank you.
ATR -
Hi, I have a MAC (version 10.10.2) and installed Creative Suite one year ago. Now I want to open the Illustrator, but it does not work. It says I should install old Java SE 6-Runtime-Version to open „Adobe Illustrator CS6“. Where can I find it? Thanks for your answer! Jana
Prompted to install Java SE 6 Runtime | Mac OS 10.9
Mylenium -
I bought an album in the I Store and it shows there as a Purchased item. However, I cannot find the album in my iTunes and do not know how to redownload it. What should I do?
If you are in a country where music can be redownloaded then it should show in the Purchased link under Quick Links on the right-hand side of the iTunes store homepage - that it where you can redownload items (as long as they remain in the store).
-
I bought an iPhone from Ebay and it did not turn on so I looked on WinSCP and it said there was NO files PLEASE can someone send me iPhone 4 files!
No, no one can do that. You need to try restoring it:
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I just purchased Final Cut Pro from the App Store and it will not download to my computer. I try and install it from my purchases file but nothing happens. Any suggestions?
If it's in the purchased page and doesn't download, you should contact Apple.
-
Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4
SMTP error from remote mail server after RCPT TO:<[email protected]>:
host mx6.me.com.akadns.net [17.158.8.114]: 550 5.7.0 Blocked - see https://support.proofpoint.com/dnsbl-lookup.cgi?ip=184.173.9.56:
[email protected]
i do alse receive from gmail....
please help... what is happening!!!!Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution! -
what is unknown error(1) !!! it appears every time i tried to update and install iphone soft ware!!! Further, that error appears once the firmware installation is in process !!!
Usually occurs on devices that have either been jailbroken or attempts have been made to downgrade the iOS. You can try putting it in DFU mode to restore but you may not be able to fix it. If you phone has been jailbroken we can't support you in these forums as it is against the terms of use.
-
Everytime I am trying to download and install Ai, its fails, error message is: update failed unable to extract the downloaded files . press retry to download again .U44M1|210
geetib, others,
It should be here:
Error U44M1I210 | Install updates -
My apple ID was hacked and a game by GodGame Inc was bought and installed. When I try to report a problem about this transaction, the link automatically sends me to the apple store support. The application is bugged. Please help.
thanks for your response roaminggnome. I changed my password immediately after it happened and I have contacted i tunes to let them know of this dillemma.
The I-tunes credit was a promotional thing by Apple to buy their laptop. So I didn't pay for the i-tunes credit in the first place. Do you think my bank will be able to reinburse Itunes credit then? I will ask support when they get back to me. -
Help........
I will starting afresh website in my iWeb, when I start the program it only shows the head or the command line and the command new website is inactive - what do I need to start over - what have I done wrongDon't quite understand what you mean, but it says at the bottom that you are still using iWeb 08 so depending on what OSX you are running, you might consider upgrading to iWeb 09. This works with Lion, Mountain Lion and Mavericks.
Apple no longer sells iWeb so if you decide to upgrade, then you'll need to purchase iWeb by going to Amazon and buying the iLife 09 or 11 boxed sets, both of which contain iWeb 09.
Install this on your Mac and it might solve your problems, or just ditch iWeb and start again with one of the newer programmes out there that are still being supported and updated, such as RapidWeaver, Sandvox, Freeway Pro/Express, Flux 4, WebAcapella 4 and EverWeb (http://www.everwebapp.com).
Maybe you are looking for
-
Which are the standard assignment blocks that should appear in SAP Product?
Hello Guru's Currently I am creating some new products to check the fields available in every assingment block within the product, when I create my new transaction and add a new position (product) I went in the link to see the product information whi
-
SAP help-Efficient way to look
Hi all, Iam really surprised by the way people post links to "sap help" when posting questions. Is there an efficient and quick way to look the SAP-help when one is looking for special things. I only got this far http://help.sap.com/ Pressed the "SAP
-
Switching ExternalMonitor View from "Source Monitor" to "Program Monitor"?
This worked fine in CS6, but I switched to Premiere CC and my external monitor is displaying the contents of Premiere's "Source Monitor" only, not the "Program Monitor". When the Timeline or Program monitor is selected, the extrenal monitor is black.
-
JDeveloper 11g af:inputRangeSlider and partialTriggers
I need to update an inputRangeSlider from ValueChangeEvent of a selectBooleanCheckbox. To do this I added a partialTriggers in the inputRangeSlider pointed to the selectBooleanCheckbox. Upon returning from the server inputRangeSlider appears broken w
-
Transferring Desktop Workbook to Viewer
Is there any documentation that explains how to export a Discoverer Workbook to Viewer? I have created several queries that I would like other users to gain access to but cannot find any notes on how to accomplish this. If somebody could advise me as