Since running the update, my mail is messed up. Light saying connected to internet is green but SMTP's (connection Dr) are red. Is there a setting I need to change?
I ran this update on my Mac. Everything else seems fine BUT mail isn't connecting to the servers. I've opened connection Dr. says I'm connected to the internet but none of the servers e.g., gmail, or yahoo will connect anymore. What do I try?
About the OS X Mavericks v10.9.5 Update This is the update I just ran.
I just went back through and went through the port settings after looking up what should be there. Why were some of them different after the update?
I did make a couple changes to the port #'s and restarted my computer again.
I opened the connection Dr. says my internet is fine but still not receiving or sending email. still shows that email is not connecting.
I know the esp's work ( I finally figured out esp vs isp) My email is up and working on my iPad so it is working MUST be a setting.
it is 3:45 my time and I'm off to work for 4 pm - so this is another 3 hours of reading and working on this to try to reinstate my emails on my home computer. Thank goodness my iPad wasn't mucked up too.
I'll go through with a fine tooth comb after work at 10 tonight.
I appreciate your help.
Similar Messages
-
I have the Time Capsule hooked to a wireless modem. It uses a static IP, which is put in and running. The MBPr connects, as well as my iPhone 5, to the internet and network without problem. I can see the Mac Mini, external drive attached to it, and the Time Capsule. The Mac Mini connects to the network wired or wirelessly, but not to the internet. On wireless, using AirPort the Internet shows green, but no connection when I open Safari. The settings under network settings are identical except for LAN IP between the Mac Mini and the MBPr. I was hoping someone might have an idea of what was going on. Before I moved the Time Capsule was on Bridge mode from another router, now it is on DHCP and NAT for the internal network.
No, its is connected direct to the providers fiber box.
-
Using my wi-fi as usual for email and FB. Then tried to do my updates in iTunes but message said "unable to connect". Shut down phone but didn't help.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
My click then shift+click will not select the multiple files, Is there a setting to change somewhere?
Click and shift works for me, so this is not a Mavericks bug.
Try deleting any finder.plist files and restarting.
To do that, click the desktop so Finder is active, then click on Go in the menu bar. In the dropdown select Library. In that folder look for Preferences. In the Preferences folder there will be at least two files whose names start com.apple.finder.....
Trash them all and restart. -
I've recently installed Mavricks on my iMac and Mail went completely rouge on me. Tried switching to using Gmail directly but it's a terrbile user experience so I decided to install the new Mail update for Mavricks but have been geting this message. "This volume does not meet the requirements for this update"? My hardrive has 791GB available.
Hi Allan,
I thought I did explain it, but sorry if that wasn't clear.
I get the little pop-up alert that tells me I have a new messages (Shows the sender and an abreviated version of the message) but those actual messages sometimes don't appear in my inbox until up to an hour later.
Jason -
When I sync my iPad with iTunes it does not update my play counts. Is there a way to make this happen?
Are you using iTunes Match by chance? I had no problems whatsoever with play counts synching between any of my devices until I started using iTunes Match. I turned it off and magically my play counts synced. Once. Hasn't happened again though.
-
I created HTML for a document and wanted to use it as HELP. When I open the index in Internet Explorer it takes me to the various topics and I can see everything I need to see in a nice format. HOWEVER, when I try to open it in Mozilla I get html code.
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
Having trouble opening jpeg files in iphone mail. Is there a setting I need to change?
I am not able to open a jpeg attachment in an email sent to my iPhone 4. Any suggestions?
Thanks.Click and shift works for me, so this is not a Mavericks bug.
Try deleting any finder.plist files and restarting.
To do that, click the desktop so Finder is active, then click on Go in the menu bar. In the dropdown select Library. In that folder look for Preferences. In the Preferences folder there will be at least two files whose names start com.apple.finder.....
Trash them all and restart. -
this recently happened, never had the problem before. I've restored my midi keyboard to factory settings but the problem persists. I go into garage band and click on the piano preset, but when I play a note it plays multiple instruments. Say I hit the C note On my keyboard, it plays the C note, but along with it is a snare hit or a shaker. And this is for every note. It seems as though the keyboard has its own setting, but I've tried resetting it. Again it's never happens before, just recently is there a way to get rid of that background sound? It's very dufficu to make music with multiple instruments playing in one note!
If it happens again the make sure that you aren't suppressing website colors.
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*https://support.mozilla.org/kb/Options+window+-+Content+panel
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong -
This issued started after I upgraded to 5.01. I 'm not sure if I inadvertently changed a setting that is causing the problem.
Make sure that the Location Bar is not set to "Nothing":
* Firefox (Tools) > Options > Privacy > Location Bar: When using the location bar, suggest: History, Bookmarks, History and Bookmarks, Nothing
* [https://support.mozilla.com/kb/Location+bar+autocomplete Location bar autocomplete]
* http://www.google.com/support/toolbar/bin/answer.py?answer=115561 Web-browsing tools : Google new tab page and most visited websites -
'''bold text'''
I tentatively think I have the solution; this is for when the session id value 'thing', in about:config, referred to in other answers is already on the default/rest state.
I am assuming, I don't what to imply certainty in-case there is a value wrong in our browsers, that the problem stems from the fact that our homepage is no longer the default for Firefox.
So, go to 'Options'>'General' and delete the homepage. This will reset it to the new address, which is 'about:home'.
I hope this helps some people. -
When going to youtube.com in it's own tab, every video comes on to play for a few seconds and is halted with no way to play the entire video again. I can watch a youtube video in facebook but it too is kept from streaming smoothly. When editing my photos and video's offline for my camera. The software performs flawlessly on my computer as always. I run Norton 360 premium edition. no bells or whistles. I run the add on for you tube as i always have from firefox. Is there some setting i need to change now with this version 6.0? 5.0 worked fine also. When I watch a video I uploaded to weather.com now, I get flawless audio without the video to see. My 4GB Ram is peaking out running firefox now. Not sure if having many tabs left open is affecting the performance and the videos. it did not do so with 5.0 as it does with 6.0. Thanks
Shockwave Flash 11.5 r502
Shockwave Flash 16.0 r0
Having more than one version of a program may cause issues.
Grab the uninstaller from here:
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
Then reinstall the latest version.
Separate Issue; Update your
Flash Player '''v16.0.0.235 http://get.adobe.com/flashplayer/''' -
I want to know if my current Add-ons and themes are compatable with the latest upgrade version of Firefox before running the update.
Hello azdec.
You can check the add-on's page at [http://addons.mozilla.org addons.mozilla.org] if it's just one or two. I believe there is one extensions in the add-ons gallery that lets you see whether your add-ons are compatible with newer versions of Firefox. But you'll have to search for them, since I don't know how it's called.
I will remind you that if you want an add-on to be compatible with a newer version of Firefox, you need to contact its author.
Also, the version of Firefox you are using at the moment has been discontinued and is no longer supported. Furthermore, it has known bugs and security problems. I urge you to update to the latest version of Firefox, for maximum stability, performance, security and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com]. -
I've been using a trial of FCP x 10.1.4, went to buy it and it's trying to sell me 10.2 - I don't want 10.2 because I'm not running the updated OS and don't want to. I have cameras that run off of OS 10.9.5. so need to keep that OS. Is there a way I can just buy the version I used in the 30 day trial (10.1.4)? It runs fine on my current OS.
I'm on latest version of OS X, FCPX, LPX and FCPXML export ingests into LPX just fine.
-
Help. I recently downloaded the latest software update for on my Apple TV (per the prompt Apple TV gave us). Ever since downloading the update, we cannot access movies, play movies, or access iTune store. We can play YouTube videos so the problem is not related to the connection. It happens only when we are trying to access Movies. Very confused. Our AppleTV was working fine until I did the new software update. Now this problem! Help!
re-add the shared lib
check the firewall on the computer
Maybe you are looking for
-
Problems with Java (TM) Platform SE 7 U45 update
The recent Java (TM) Platform SE 7 U45 update is causing problems with the Java plugins in Firefox 24. This is described in: Java Plugin Security Issues A second issue relating to this Java Platform SE 7 U45 update is the "Configure Java" item keep a
-
Why do my photographs get out of order after I burn them to a CD-R?
Why do my photographs get out of order after I burn them to a CD-R? They are in a folder in desktop and in order before I burn the CD. What am I doing wrong?
-
HT1338 Trying to update my desktop software... Help!
Trying to update my desktop software. I currently have OS X Version 10.5.8, I need a version 10.6.8 or higher. I tried with the Apple icon but says "software update doesn't have any new software for your computer at this time." Any advise anyone?
-
Due date update using GP APIs?
Hi all I am working on the Due date update using GP APIs, I have done it at the "process" level. However I dont know how to trigger it at an activity level using GP APIs. Please tell me how to gain access to the Activity (Action) instance of the next
-
Is it possible to retrieve the text justification of a text layer using AEGP suites ? The jsx equivalent is var just = layer.property("ADBE Text Properties").property("ADBE Text Document").value.justification; Thanks