Since Snow Leopard epson RX680 will not print CD labels and color bad

I have tried everything recommended, all udates and drivers and etc... no luck printing on CDs. Can anyone help me? I cannot afford a new printer.

i have the exact same problem, i even rang and emailed epson, no luck, iv'e tried all the updates, even changed thin ink as i thought low ink could be causing the problem, it just doesn't let you click on print, grrrr have you had any luck??? i have the epson rx700w, but it uses the same print cd software...

Similar Messages

  • Since Snow Leopard, Mac Pro will not sleep with Apple wireless keyboard

    I have an odd problem, now on 2 Mac Pro (Nehalem) with 10.6.1:
    Since Snow Leopard, the system will not sleep as long as a) the user is logged on (any users/profile) and b) the Apple aluminum wireless keyboard is 'attached'.
    If I log off first, sleep works fine. If I turn the keyboard off first, it's fine. But if hitting 'sleep' when logged on, the screen turns dark, sleep process begins, but the system comes right back (with a note 'keyboard disconnected'.
    It's as if the keyboard disconnects after sleep, but the system still monitors it, and wakes up.
    Note: Wake for bluetooth devices IS NOT ENABLED!
    Here is the console log (relevant info):
    10/18/09 4:57:33 PM kernel System Sleep
    10/18/09 4:57:48 PM kernel Wake reason = UHC1
    10/18/09 4:57:48 PM kernel System Wake
    10/18/09 4:57:48 PM kernel Previous Sleep Cause: 5
    10/18/09 4:57:48 PM kernel USB (UHCI):Port 1 on bus 0x1d has remote wakeup from some device
    10/18/09 4:58:53 PM kernel System Sleep
    10/18/09 4:58:55 PM kernel Wake reason = UHC6
    10/18/09 4:58:55 PM kernel System Wake
    10/18/09 4:58:55 PM kernel Previous Sleep Cause: 5
    10/18/09 4:58:55 PM kernel USB (UHCI):Port 1 on bus 0x5a has remote wakeup from some device
    Does anyone have any idea? While on, the keyboard never disconnects - i.e. I don't have any other issues with BT or the keyboard (this is the 2nd I tried).
    Also, my apologies for double-posting this earlier in a different forum; cheers!
    Thanks,
    Dan

    Hi,
    and thanks for posting that.
    That's too bad. I am probably going to log off if needed, rather than going wired, but I can't believe that this might be more prevalent than just me and there is no 'fix'...
    Anyone ?!
    Thanks as always,
    Dan

  • Epson rx680 will not print after apple update print driver

    I have an Epson RX680 which worked perfectly until I allowed the latest apple update to be installed with newest epson printer driver. It now will not print but comes back with a rasce blah blah error. Tried restoring to the previous software but to no avail.

    https://discussions.apple.com/thread/5233149

  • My Epson 3880 will not print decent prints.

      I have a macbook pro I updated to Lion 10.7.4 and now my epson 3880 will not print decent prints! Worked fine before but I cannot load profiles ofr paper now and therefore cannot get quality prints now! I am an artist and this is a large part of my business is there an answer for this issue?
    <Re-Titled by Host>

    Welcome myazel!
    myazel wrote:
    ... I cannot load profiles ofr paper now ... is there an answer for this issue?
    I downloaded a dmg file containing Epson ICC profiles . After running the installer, I found the path to the profiles is
    HD/Library/ColorSync/Profiles/EPSON Stylus Pro 3880/
    HTH

  • Officejet 6100 - H611a Will not print in grayscale when color cartridge is depleted.

    The title says it all. - Windows 7 64-bit
    Officejet 6100 - H611a Will not print in grayscale when color cartridge is depleted!
    Even though the documentation that came with the printer says it will.  After 2+ hours on the phone with HP support over the course of 2 days, I have been informed that printer WILL NOT print in black ink only if a color cartridge is empty.
    I thought anyone who purchases this model should know the documents included lie.
    From page 31 of the Officejet 6100 user manual:  "If a color cartridge is depleted, the printer will print in grayscale using the black cartridge."  LIES!
    The HP Help Programs says the same thing.
    I have hard-reset the printer, removed and reinserted all the cartridges, set the options to "black ink only," Nothing worked.  3 HP reps all said the same thing, "You have to get a new magenta cartridge."
    Will be retuning for a refund as I purchased this model SPECIFICALLY because the manual said it would print the grayscale without color ink present.
    Have had 4 HP printers over the years, never even considered buying anything except HP.  This will be my last HP printer.  Extremely disappointed by HP's deception.

    Sorry the printer did not perform as expected.  I have escalated this in an effort to get this to the right people.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • I accidentally downloaded lion. I did a timemachine back-up and tried to reload snow leopard. It will not accept. How do I re-install snow leopard over lion?

    I accidently installed lion on my mac book pro. I did a time machine back-up. When i try to re-install snow leopard, it won't take. Any suggestions on how to install snow leopard over lion?

    Accidentally, eh? How, might I ask?
    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

  • HP Photosmart Premium c 309g will not print black, all other colors fine. Shows ink levels fine,

    Have photosmart premium c309 g connected wirelessly to I Mac and Mac book pro.  The unit suddenly will not print black.  Ink levels show all good.  All other colors print fine.  When check HP utility and go to print quality diagnostics, a box appears that states cannot print PQ page--make sure printer is turned on.  If I tell it to print a page, it immediatly connects and prints all colors but not black.  How can it print regular page but not receive message to print PQ page?  "make sure printer is on" ??

    I have this exact same problem with the same printer.  Printer will not print black. My macbook pro is connecting to the printer but shoots out a blank page.  I just put in a new ink cartridge even though it was not low on ink.  Please help.

  • Epson RX595 will not print since Snow Leopard install

    I cannot get my trusty Epson to print since installing Snow Leopard and latest printer drivers.
    I can scan. Just cannot print.
    I have looked at some troubleshooting support articles. Does anyone have a good link, tip?
    Thanks in advance for any help with this!

    Try deleting the printer, the <hard drive>/Library/Printers/EPSON folder and the /Library/Caches/Epson folder, and then reinstalling the drivers using Software Update. Then add the printer, making sure that you are using the Epson driver, not the Gutenprint driver.

  • Following Driver Update Epson CX6000 will not print

    I 'just' posted this on an answered post and now notice a difference, so I'll repost the corrected info here.
    I have a CX6000, Snow Leopard, and following the Apple update - no printing.
    I think I've tried most of the suggestions above with no luck. THE ERROR MESSAGE IS "rastertoescpll failed".
    But, I have a question - do I have to uninstall the old driver prior to installing the new? (Or, does it take the place of the old one?)
    So, would I:
    1. Delete the old driver
    2. Install the new Epson Driver
    3. Apply the updater
    4. Repair permissions (again) somewhere along the way?
    I have a laptop which (again Snow Leopard) which was not upgraded and it prints fine.
    Thank you

    I'm having the same problem as you but I'm having trouble understanding exactly what you did. I've deleted the old driver and re-installed the latest driver I found from the epson website, but this doesn't seem to work. Can you offer any help?

  • Trying to upgrade to Lion from Snow Leopard but it will not let me purchase the upgrade telling me my intel imac is not compatible?

    HELP!
    I have a fully functioning imac running snow leopard fine (recently upgraded to it) because of flash and java issues on browsers seemed I needed to get on to Lion or Mountain Lion so I upgraded the RAM to 2.5GB and now it will not let me upgrade maybe because my model seems to be a late 2006 and not a 2007 imac, cannot understand why it will not let me do this or provide a solution for me to upgrade what I need? Can anybody help, assist or advise?

    Also it says this:
      L2 Cache:          4 MB
      Memory:          2.5 GB
      Bus Speed:          667 MHz
      Boot ROM Version:          IM51.0090.B09
      SMC Version (system):          1.9f4
      Serial Number (system):          W8******VUV
      Hardware UUID:          00000000-0000-1000-8000-0017F2C63410
    Thank you for assistance, Apple wanted me to pay 35 uk pounds to talk to them!
    <Edited By Host>

  • HT204135 epson 3880 will not print a3 from cs6

    i am on an old intel mac pro with lion 10.7.5 using photoshop cs6 13.05 64 bit
    i can not print a3 i get a cropped a4 shape in one corner of the a3 page
    the file will print fine in preview but not through photoshop.
    print dialogue says eveything should be ok displays in the window as it should print .
    but doest come out
    epson 3880

    Welcome myazel!
    myazel wrote:
    ... I cannot load profiles ofr paper now ... is there an answer for this issue?
    I downloaded a dmg file containing Epson ICC profiles . After running the installer, I found the path to the profiles is
    HD/Library/ColorSync/Profiles/EPSON Stylus Pro 3880/
    HTH

  • Can't downgrade to Snow Leopard from Lion will not recognise imac dvd

    iMac 27-inch, Mid 2010  
    Software  Mac OS X Lion 10.7.4 (11E53)
    Can someone please tell me how I can downgrade from OS X Lion to Snow Leopard on my iMac
    When i insert the DVD it just spins for about 10 seconds then ejects the dvd..
    any help would be great thanks

    Lion has installed a recovery partition on your Hard Drive and you must completely erase and reformat the Hard Drive before you can go back to Snow Leopard.
    Check out some of downgrade threads just to the right in "More Like This"

  • HT1338 why wont my mac mini read snow leopard disc, it will read other dvd's and cd's

    I have a mac mini since 2009 I recently got the snow leopard from apple but when I insert it it in the drive it just makes a few noises then ejects the disc. I have tried other dvd's and cd's and it reads them ok any help appreciated

    It's possible the DVD is damaged, scratched and/or dirty.  Check out KB Articles:  http://docs.info.apple.com/article.html?artnum=50448  How to Handle and Clean CD and DVD Discs and Troubleshooting Mac OS X installation from CD or DVD
    Or you can request another DVD from Apple and/or get your $$$ back.
    Your drive may need cleaning.  Cleaning kits can be purchased from any store that sells CD/DVDs.

  • My hp deskjet 9362c will not print in black and white/error message says the printer mode is set at

    can not get my hp deskjet 932c to print in black and white.  error message states print mode in auto, but I can't find the print mode to correct.  printer was printing in black and white or color automatically til last night, then in middle of document quit altogether.  new cartridges get the same results.

    Check the paper type settings.  If this is set to "automatic" and the paper type is detected as photo paper then black only print is not available.  (The black pigmented ink is not compatible with photo paper.)  What is your operating system?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Epson R2880 - Will not print - paper sizes

    I am having major problems with trying to print to a R2880. I have recently purchased it and have had problems with printing to it from the beginning. Sometimes it works but mostly it doesn't.
    The Epson driver is 6.2 which is the latest. I am running Leopard. Do not want to upgrade to SL cause what I read shows FCS2 does not run on it.
    Keeps on telling me that the "Paper source selected in the printer doesn't macy the paper loaded in the printer" which is of course bollocks.
    I have tried the solution offered by a previous post which was to got to the print preview and then Cmd - P and then choose the right paper. Worked fine on an A4 but when I did the same for a 10 x 15 cm no go.
    It suddenly started working the other day but when I chose a selection of 10 x 15's (varied portrait / landscape aspects) to print it did not orientate them correctly. The paper was installed in a portrait arrangement yet not one of the photos printed on the page correctly.
    What a waste of time this printer and Aperture are.
    Can anyone help on this most frustrating problem. I have had this printer for a few months and have only managed to print a handful of photos !
    Regards

    Hi Colin,
    The R2880 is a little finicky when it comes to paper source. A couple of questions:
    • What paper are you using? What size? Are you using the back tray or the main tray? I had a ton of problems with the back tray and that very error. I now always use the main tray, but it depends on the paper you use since certain types can only be loaded in the back.
    • Are you making sure the preset you choose is for +sheet feeder+ and not +roll paper+?
    The Preview solution you read about is probably mine and was brought on by SL. Fortunately 10.6.2 fixed that problem but I've still had the paper source error come up a couple of times - I need to open the print settings for the preset I want to use and save it again (it's as though it needs to be reminded that it should use the sheet feeder, even though that setting is saved right there in the preset).
    My first thought was that your problem might have to do with the non-conventional paper size, but I also make custom 16x12 prints on 13x19 paper and don't have problems at all.
    I'm guessing it's probably a combination of settings and paper type...

Maybe you are looking for