Since Thanksgiving, my I pad and IPhone are showing around 4,000  emails and I don't know how t remove the numbers.

MMy I Pad and IPhone both are shoeing3,367 emails in red .How do I remove these numbers.?

You would have to put the pics on your computer.  Certainly your old phone is capable of getting the pics to your computer.
From there you can sync them to iphone.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Similar Messages

  • HT2693 after syncronization with my pc both pc and iphone are showing that phone could not be activated, because there is no sim in the slot

    Sir, Yesterday night i was syncronized my iphone 3gs with my pc.  after that operation my phone will not be activated showing error as cound not be activated because sim was not installed.  but already I was inserted my sim in it.  The phone is connected to my Pc and with my WiFi also.  Plz help me to activate it

    Not sure what this has to do with Apple TV.
    Also this is a user forum, no one here can help with that. I would contact your carrier.

  • HT1727 I inherited my iPhone & I don't know how to update the 45 apps already on it

    I inherited my iPhone from my husband so most of the apps are under his old Apple ID/business email account but his email account is no longer accessable since he has recently retired and no longer can use his business account.  I don't know how to update the 45 apps that he purchased that are still on my phone.

    Hi barbsapplesupport!
    Here is a link that can tell you about updating your apps on your iPhone:
    Download and install app updates - App Store - iPhone Basics - Apple Support
    http://support.apple.com/kb/TI133
    It is likely that these apps were purchased under his Apple ID, so in order to update them, you will need to enter his Apple ID and password when prompted. Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Somehow i have synced my photos from my area on to my ipod touch, and dont know how to remove the photos. Any help?

    Somehow i have synced my photos from my area on to my ipod touch, and dont know how to remove the photos. Any help?

    You need to unsync them.  If you uses the folder syncing method either remove them from your syncing folder or change which is you syncing folder.  Also see:
    iPhone, iPad and iPod touch: Syncing photos via iTunes

  • Help!! working on a movie on Imovie. I had to delete a music file from a clip section and now there are some clips that have no audio!!! don't know how to get the audio back to my clips!!!! Help!!!

    Help!! working on a movie on Imovie. I had to delete a music file from a clip section and now there are some clips that have no audio!!! don't know how to get the audio back to my clips!!!! Help!!!

    You can use some third party software to copy the music from your old iPod back to computer first, and then import the music into iTunes and re-sync them to yournew iPod. Here is a guide about how to transfer iPod music to computer. Hope it helps. Feel free to email me if you need further help.

  • I purchased an album on iTunes - Magna Carta - On July 9th.  The album is all grey in My Music and I cannot play anything.  I have the reciept however I don't know how to address the issue....  I have since bought music and it downloaded fine.

    I purchased an album on iTunes - Magna Carta - On July 9th.  The album is all grey in My Music and I cannot play anything.  I have the reciept however I don't know how to address the issue....  I have since bought music and it downloaded fine.

    Hey kaliapple,
    Thanks for the question. First, you can try deleting and redownloading the purchase by following along with this:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    If that doesn't resolve the issue, then you can read how to report an issue with your purchase here:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933
    Regards,
    David

  • My itunes won't recognize my iphone and i don't know how to install the 10.6.3 itunes on my phone or whatever. helppppp.

    my itunes won't recognize my iphone and i don't know how to install the 10.6.3 itunes on my phone or whatever. helppppp.

    its looking for you to update on your computer. if your on a windows your want to open up itunes. click on help, and then click check for updates and then that should let you up date it. mac you want to click on itunes up by file and edit then click check for updates

  • I don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

    i don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

    Step by step:
    1. On your main vi Front Panel, create your boolean indicator.
    2. On the block diagram, right click the new boolean indicator and select Create - Reference.
    3. On sub-vi front panel, create boolean indicator (or use one that is already created).
    4. On sub-vi front panel, create a reference (Controls Palette - Refnum - Control Refnum).
    5. Right click on the newly created Refnum and select Select Vi Server Class - Generic - GObject - Control - Boolean. The refnum label changes to BoolRefnum.
    6. On sub-vi block diagram, create Property Node (Functions - Application Control - Property Node). Find the BoolRefnum and move it close to the new Property Node.
    7. Wire the BoolRefnum to the reference input of the property node.
    8.
    Right click on the property node and select Change to All Write.
    9. Move mouse to point to Visible inside property node box, left click and select Value.
    10. Wire the boolean indicator from step 3 to the Value input of the property node.
    11. On sub-vi front panel, right click on icon and select Show Connector.
    12. Click on empty connector spot then click on the new BoolRefnum. Save your sub-vi.
    13. On main vi block diagram, connect refernece created in step 2 to the new connector terminal of sub-vi.
    14. Save and run.
    Here are the modified vi's.
    - tbob
    Inventor of the WORM Global
    Attachments:
    Pass_a_Reference.vi ‏20 KB
    GL_Flicker_mod.vi ‏83 KB

  • On my macbook pro the hard drive icon is not on my desktop and I don't know how to find the hard drive or get the icon back on my desktop

    on my macbook pro the hard drive icon is not on my desktop and I don't know how to find the hard drive or get the icon back on my desktop

    Click on the Desktop. From the Finder menu select Preferences. Check the boxes for what you want on your Desktop. If they are already checked, then try unchecking and rechecking.

  • Hi, I just put a new internal hard disk to my MacBook after formattimg it and I don't know how to install the OS X? Any help please

    Hi, I just put a new internal hard disk to my MacBook after formattimg it and I don't know how to install the OS X? Any help please

    Be sure you have prepared the new drive correctly:
    Drive Preparation
    1.  Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
    When formatting has completed quit DU and return to the installer.  Complete the OS X installation.

  • When I went and connected  phone to my laptop and hit restore and it got rid of everything my photos my contacts everything and I don't know how to get the stuff back and if you need to know I have an IPhone4S

    When I went and connected my phone to my laptop and hit restore and it got rid of everything my photos my contacts everything and I don't know how to get the stuff back and if you need to know I have an IPhone4S

    I take it you were replacing an older iPhone and this was the first time you plugged it in? If so, that's what happens. It restored the backup of your old phone. A backup of the current phone is not made in those circumstances.
    If that's not what happened, you need to clarify.

  • I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

    I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?

    I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?
    Thank you

    So it seems from reading the COMMAND manual that my first issue is that I used a 16GB SD card, and the manual says it will only recogize up to a 2GB SD card. I did use my MB Air's SD card slot and crated a folder and dragged the music files to it, then to the card. So I am going to get a 2GB card and try that next. Otherwise just stick with the iPOD connected. At least that is 8GB

  • I upgraded to firefox 4 but it is not suitable for my version of Mac Os and don't know how to get the previous version of firefox back!

    I downloaded the latest version of Firefox (ie 4) on my Apple laptop, but the fact that it is "unsuitable for (my version of) Mac Os " was not revealed to me until I had already replaced the previous version which was suitable. I don't know how to retrieve the version I was using.

    The latest versions of Firefox require at least Mac OS X 10.5 and an Intel processor. You can revert to Firefox 3.6.xx for Mac 10.4 by downloading the installer from http://www.mozilla.org/en-US/firefox/all-older.html
    More information in the [[Firefox will not start]] article, under
    [https://support.mozilla.com/en-US/kb/Firefox%20will%20not%20start#w_firefox-will-not-start-4on-os-x-10-4-or-earlier-or-with-a-powerpc-processorsf5on-windows-98me-or-earliersf Firefox will not start on OS X 10.4 or earlier or with a PowerPC processor]

  • I tunes has stopped working in windows 7 and I don't know how to get the crash information that everyone else seems to get to know what the cause is....any help?  I have a toshiba windows 7 computer.

    I have a toshiba computer and it is windows 7, recently after I installed imatch everytime I open itunes I get the message 'i tunes has stopped working' and windows cannot find a solution and has to close.  There is no solution and I don't know how to get the crash information on my computer....can anyone help as I want to finish downloading all my songs to match to be available on my mac products.

    Re: That garbage is unreadable.
    If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
    Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
    I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself.

Maybe you are looking for

  • Syncing ipad with Mac OSX 10.4.11

    I have OSX 10.4.11. Why does my new IPAD not appear in the devices list on itunes?

  • Graphical-mapping

    Hi,    plz tell me about graphical-mapping. with warm regards. vikash

  • Advanced Software Rendering Solution For Games

    I am actually looking to talk to someone at sun but figured someone in this forum might be interested in what I have done as well. A few years back I developed a feature rich 3D api for java that is 100% software based. I realize there are some other

  • Error writing to file when updating Itunes Windows 7

    Error message: C\Program files (x86) Common Files\Apple\Mobile Device Support\AppleMobileDeviceHelper.resources\clientdescription.plist MAKE SURE YOU HAVE ACCESS TO THAT DIRECTORY. HELP!!!

  • How to access Oracle Apps 11i forms using Vmware Player?

    Hi, I have installed Oracle Apps 11i on native OS OEL5 Server and guest OS Windows XPP using Vmware Player.Now how to access Oracle Apps 11i forms from Windows XPP using Vmware on my OEL5 Server Desktop? Thank's Regard's Rerry