Since the update to iOS 5 I've been unable to access the Restrictions section in Settings. I didn't forget since it was the same as my unlock passcode and that works. Is there anyway to reset that without a complete restore?
Since the update to iOS 5 I've been unable to access the Restrictions section in Settings. I didn't forget since it was the same as my unlock passcode and that works. Is there anyway to reset that without a complete restore?
Hi,
Thanks! I forgot to add, I have debonded and rebonded the bluetooth in car and phone and have carried out 3 restores on the phone in my ITunes. All to no avail. I have also jsut spent £40 on a lead from Ford that has made no difference too! I went to them today to request a software upgrade on my car as I though perhaps the lack of connectivity in the car was down to the car being behind the iOS5 software but was informed there was no need for an upgrade and this problem is purely an apple problem! Is there any way around the downgrade? Or are apple gong to resolve this problem at all??
Similar Messages
-
I forgot the password in restrictions that I created so my daughter coundlt buy any in-app purchases. Now we can't buy any videos until I alter that restriction. Is there anyway to reset that or findout what the password was?
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
4. What to Do If You've Forgotten Your iPhone's Passcode
5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
6. Restoring iPod touch after forgotten passcode
7. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
Forgotten Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
If this method does not work, then you will need to fully Restore your
device as New -
After updating Firefox yesterday I have been unable to access the internet. I have tried the Norton 360 fix several times, but it still doesn't work.
After updating Firefox yesterday I have been unable to access the internet. I have tried the Norton 360 fix several times, but it still doesn't work.
-
I have forgotten my admin password. Is there anyway to retrieve it without having to go to the genius bar?
This may help:
http://support.apple.com/kb/ht1274
http://osxdaily.com/2010/08/10/forgot-mac-password-how-to-reset-mac-password/
Ciao. -
Ever since I updated my iPhone 5s I am unable to access my account information with US cellular
Has anybody else had this problem since doing an update on their iPhone?
I actually went to the uscellular agent, who called for me. She was told that it is an Apple problem and someone will get back to us. God only knows how long that will take. She told me to give them two weeks and if I don't have a resolution, to come back to the store.
-
Please Help!!!!
It helped earlier but it has come back again. I don't know what to do. I tried what you said earlier but this time even this is not working either. And quite intrestingly my phone won't turn off. I turn it off, it goes off and then restarts on its own and then keep giving the same message again and again.
Could it be a charging cable, is there any chance that the cable which was working fine one day could turn to be "incompatible" with iphone the other day????????
Please help -
Is there anyway to reset the default ID number that SharePoint gives to an item back to "1"?
I created a list and added a couple test items to verify that everything was working correctly.
I'm using the ID number (which SharePoint automatically creates for every item in a list), so for example, SharePoint set the first test item to have an ID of "1" and the second to have an ID of "2."
I've deleted the two test items, but ID of next item will be "3."
Is there anyway to reset that counter back to "1" right before I take the list live--even if it's just a one time reset?You cannot reference the ID of a row for a newly inserted row in the calculated column. The ID does not yet exist when the calculation is performed.
Read "Using column references in a formula" in http://office.microsoft.com/en-us/windows-sharepoint-services-help/introduction-to-data-calculations-HA010121588.aspx
Thanks -
My daughter forgot her passcode on her ipod touch. Is there anyway to reset it without losing all her information?
Only by restoring from backup
Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the iPod backup that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Since I updated to iOS 8.0.2 my iPad has not been working properly. It freezes in the middle of things. It cuts out when I'm browsing. It's slow when I. Typing and more how do I sort it
Hello Jm23ur,
After reading your post, it sounds like you are experiencing performance issues with your device. You may want to consider restarting the device first, and then resetting if that does not work. This article provides detailed instructions for Restarting, and Reseting:
Turn your iOS device off and on (restart) and reset
How to restart
Press and hold the Sleep/Wake button on the top of your device until the red slider appears. Then drag the slider to turn your device completely off.
After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
How to reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
Thank you for contributing to Apple Support Communities,
BobbyD -
I have tried 3 official apple ones and 2 different plugs. Ive tried plugging it into my laptop but will not find the phone. it has had problems since i updated my ios. Battery has been replaced. Any suggestions would be fantastic
test if it charges with an ac charger
test if it's detected by another computer
if it's no to both then likely the connector is broken
if it's yes to both thne it's likely your computers itunes install which is the problem -
Since the update to iOS 7.0.2 I have only access to my email when there is a new massage. As as massages have been read my name turns light gray and I cannot access my email anymore. I have 2 other email addresses and they work properly.
I am in the same predicament...any resolve? Other than possibly taking it into the shop?
-
ever since i updated to ios 8.3, my imessage has been on "Waiting for Activation" Please who can assist? i have reset the network settings and also have restarted the phone.
same problem here
-
Since installing the latest software update I have been unable to access my mail app.the screen appears blank?
Force close the mail app and reset your iPad. See if that fixes it.
In order to close the mail app, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the mail app and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
When I ring someone from my iPhone 4 they can't hear me sometimes and other times they can hear me fine. This has only started happening since I updated to iOS 6 it was perfect the day before.
Good news! I believe I have fixed my phone!!
A friend of mine was having the same problem that I was having where you could hear other people but they couldn't hear you.
We fixed the problem by redownloading the 4.2.1 update. 4th post down on this page: http://forums.macrumors.com/showthread.php?t=1052794&page=5 is a list of links to the update files. I downloaded the one for my phone and did a restore (from a backup) after downloading the file and double clicking it so iTunes opens. Since I've done this my phone has been working perfectly again!
It might take you a few tries, it took my friend 3 tries until his worked right and it worked for me on the first try. I'm guessing something was screwing up during the download. -
I had an iPAD 4. Since I updated to IOS 7 it began to freeze up. I now have the iPad Air and the same thing happens. I'd like some advice because apple's technical service has no idea.
Technical service in Spain is useless. They told me to re-install everything again as when it's brand new, application by application to see which one is failing. I have 150 applications.
If they continue in this direction they will end up like Palm
You can tell Steve Jobs is no longer in charge.
I'm thinking of moving to Samsung.If this problem continued across an iPad with Retina to an iPad Air it is almost definite it is one of your apps causing the problem. Run it for a day with no apps loaded on it, if it doesn't freeze then one of your apps that has not been updated is causing the issue. And the Technical Service in Spain gave you correct information.
It was no different when Mr. Jobs was still in charge (I was around for iOS 3.0) and it is no different on a Surface or a Note.
Maybe you are looking for
-
Hi All, It seems you can't use SharePoint Designer 2010 to open a site if you have both forms and Windows Auth selected. Is there any way around this if i want to use the 2 at the same time? How does this work with SharePoint 2013 as i would be
-
Hi guys I'm using VS + C# for my Add-on I create my new document by this code: Document myDocument = myVisioApplication.Documents.Add("MyTemplateFile.vst"); and it create new document for me but the default name of this document is Drawing1.vsdx , Dr
-
Validating Serial number on Adobe site.
Hello I was explaining that i uploaded Adobe Acrobat 7.0 Professional - serial number: xxxxxxxxxxxxxxxxxxx3429 and it loaded correctly giving me an okay for the number provided as i followed through the start up process. When i went online to
-
how can i upload a podcast to itunes
-
IDVD cannot use full capacity of a DVD
This is sort of a pet peeve. On single-layer project, it tells me I have 4.0GB of space to work with, and this actually means 4.0 billion bytes, not 4.0GiB. Same with double-layer project: it shows 8.0GB of space, which is roughly 7.5GiB. A double-la