Since this morning when I try Software Updates and then Updates, I get a consistent message - An Error has occurred, The operation couldn't be completed. (NSURLErrorDomain error - 1012). Is this a server error and what do I do next?
Since this morning when I try Software Updates and then Updates, I get a consistent message - An Error has occurred, The operation couldn't be completed. (NSURLErrorDomain error - 1012). Is this a server error and what do I do next?
Please help!!!!!
Wait until Apple fixes this server issue.
Best.
Similar Messages
-
when I try to install this update I get the message an error has occured The operation couldn’t be completed. (NSURLErrorDomain error -3001.)(102) - can anyone help my get the update please?
There are problems with the servers. Download and install that update > http://swcdn.apple.com/content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 n4a9yyq37g/Safari6.0.2Mountain.pkg
-
Error has accrued The operation couldn't be completed. (NSURLErrorDomain error -1012.)
When going to the App Store trying to update my software here what i get:
Error had acurred :
The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
Any one knows what to do ? I have tried it a few times and it is not working not sure if it is my MacBook Pro or App Store?
Regards
SamI'm having this same error tonight on my MBP 13 inch Mid 2009 running 10.9.2. I was also upgrading my sister's MBP 15 inch after a fresh install of 10.9.1 and after doing the 10.9.3 Combined updater. I was beginning to wonder if my rural wireless ISP had implemented some firewall setting that was causing this.
I connected to my office Mac mini server and it's doing the same thing.
I guess we have to wait for Apple to fix this.
Terry McAdams
MacTech Solutions
Apple Specialist
Apple Authorized Service Provider
Wichita Falls, TX -
When trying to run a software update in 10.8.2 from the App Store I recieve the error - The operation couldn't be completed (NSURLErrorDomain error -1100.)
Any help would be appreciated.
Thanks
AnthonyI found the answer by looking over towards the right on this page...to the More Like This section.
The answer is that this indicates a server overload with Apple's App Store server. Give it some time and try again.
Here's the link where this was discussed:
https://discussions.apple.com/message/19553195#19553195 -
When I tried to download an update, the following message occurred "The operation couldn’t be completed. (NSURLErrorDomain error -3001.)(102)". What is this? How can I complete the update?
“Not Found
The requested URL /content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 n4a9yyq37g/Safari6.0.2Mountain.pkg was not found on this server.“ -
I get the following error when formatting a external hard drive.
Partition failed with the error:
POSIX reports: The operation couldn’t be completed. Cannot allocate memory
I have a Macbook pro 13" A1278. I purchased it around december 2010. I have a HHD 3.5" drive desktop select II 1.5TB. I purchased it around Febuary/March 2011 to use with my Macbook pro. I formatted it and moved all my files to there, I got it so my macbook's hard drive wouldn't brake and I lose everything on my macbook.
Is there any fixes?First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes." -
I plug usb mass storage device to my macbook pro i7 than every thing is stack and i reinforce to shutdown and than I start again but mac fail to boot again.
I tried different optiones in disk utility in mac os startup disk. but still fail to repair, erase and partition. I try to fix with the steps listed in
https://discussions.apple.com/message/13288923#13288923
but it fail to partition with the msg:
Partition Failed
Partition failed with the error: POSIX reports: The operation couldn’t be completed.cannot allocate memory
pls pls pls help urgentely on this matter I stop working.
Kind Regards,
peHi again OGELTHORPE.
I've already run two hardware tests. One quick one and one extended one. It was unable to pick anything up.
It's like everything is running perfectly, but when I go to erase the HDD or partition it, it pops up with the error message. Even when I try to erase and partition using "Terminal", I received the same error message.
It's beginning to do my head in, but will see if replacing the SATA cable will make any difference. If it doesn't, I'll hazard a guess it could be the Logic Board.
Thanks again for your suggestions!
L. -
An error occured The operation couldn't be completed.
Wil trying to update a MacBook Air, I get message: An error occured The operation couldn't be completed. (NSURLErrorDomain error - 1100.) [OK]
That error may result from connecting to a wireless wide-area network (WWAN) via a phone or mobile hotspot. If that's what you're doing, try another network. Sometimes one WWAN will work when another doesn't.
-
The operation couldn't be completed (NSURLErrorDomain error -1012.)(-1012)
Good Morning,
I am running into an issue when trying to process an update in the appstore on my macbook pro. I get the following error after clicking on the "update" button:
the operation couldn't be completed (NSURLErrorDomain error -1012.)(-1012)
Any help would be greatly appreciated!James6 I love you, this problem has been annoying the **** out of me for months!
Thanks! Just turned off Kaspersky and low and behold a multitude of updates available!
Brilliant, good work fella -
Error while consolidating (The operation couldn't be completed. Permission denied)
I have just bought a new MacBook and that has given me extra harddrive space, and now I am trying to consolidate some masters in Aperture, that I have on my Time Capsule. But I get this error:
Error while consolidating (The operation couldn’t be completed. Permission denied)
I can access my Time Capsule in Finder perfectly well. Can anyone help?I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-) -
Any ideas on and error that says: The operation couldn't be completed. (com.facebook.sdk error 2.)
I got an error stating: the operation couldn't be completed. (com.facebook.sdk error 2.) Any ideas on what is wrong?
10shamrocks wrote:
I got an error stating: the operation couldn't be completed. (com.facebook.sdk error 2.) Any ideas on what is wrong?
Not really. Never used Facebook. I'm perfectly content without social media. -
Is there anything I can do to update my OS? I have the Mountain Lion and I keep getting them- The operation was cancelled.(3072)- when I try.
Often due to another User being logged in & having Safari open.
log out from any other users, or at least close any open applications there. -
tried serveral times ot set up find my phone, but all i get this this message "mobile me verification failed the operation couldn't be completed account error 500"
Do apple actual read these forums and help anyone?Check that the date & time are set correctly. This solved it for me.
Good luck. -
What does this error message when I try to do updates mean? And how can I fix it? Thanks. (The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
James
maverick 10.9.1Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Getting this message when I try to update The operation couldn’t be completed. (NSURLErrorDomain error -1100.)
There are many people suffering from this problem right now (including me). It appears to be a server issue. Just wait and try checking for updates again tomorrow.
Some things I have heard indicate that this may be a regional problem, though what parts of the world are affected I don't know yet. A few people have been helped by deleting the following preference file (paste the path into the Go -> Go to Folder window in the Finder to locate it), though most have not:
~/Library/Preferences/com.apple.SoftwareUpdate.plist
Maybe you are looking for
-
Looking to get a new MacBook Pro
Hey guys, I've been looking to get a new MBP for the past few months now, and have held off in wait of Lion being announced. I know it's coming out sometime in July, but nothing more specific than that, and I'm really eager to get a MBP! I was wonder
-
My iPod doesn't sisplay on the desktop when I plug it in!
ok so when I plug in my ipod, it shows up in the itunes window, but not on the desktop so I can't drag pictures into my ipod on the desktop. It would show up on my other mac, but not on my new one. Please help me somebody...I'm going crazy.
-
Is it possible to use a case statement when joining different tables based on input parameters?
Hi, I have a scenario where my stored procedure takes 5 parameters and the users can pass NULL or some value to these parameters and based on the parameters, I need to pull data from various tables. Is it possible to use a case statement in the join,
-
How do you save an image that was downloaded from an email into pages to my album?
I had a friend email me a word document with images in it. The document was downloaded onto my iPad and opened in the pages app. I would now like to save the images from this document into my album so I can use them in other applications. I know how
-
JVM crashes when converting jstring to native string
Hi , I am trying to convert a jstring to a char * . My main program is in C. I tried calling the two methods : const char str = (env)->GetStringUTFChars(env, myJstring, 0); and const char *result = JNU_GetStringNativeChars(env, myJstring); Both the t