Since update 36 firefox is very slow to start (over 1 min)

ever since update to v36 firfox start up time is well over 1 min i have tried clean install/refresh/checked norton firewall setting and adjusted same reboots restarts etc etc nothing is working my end i have never had a prob with FF before (i have IE and Chrome and Waterfox ALL 3 work fine , once firefox has started it runs as per usual it is just the start up

found a solution by trawling heres the link to the mozilla support item which sorted it for me
[[Firefox takes two minutes plus to load, apparant clash with Norton Internet Security|https://support.mozilla.org/en-US/questions/1048938]]
specifically the image at the bottom helped me

Similar Messages

After running a spyware program, Firefox is VERY slow in starting. I have done all I can think of, including uninstalling and installing new.

I am confused about the profile .

Please make sure that there is not an issue with any addons or hardware acceleration by trying Safe Mode:
*[[Troubleshoot Firefox issues using Safe Mode]]

Latest update has my safari/firefox running very slow

I did the latest software update Monday night, and now my safari and firefox are very slow to load. I have raised the memory storage to 100 MB, tried the proxy thing (didn't work, so I put it back to where it was), tried clearing the cache, and I don't know what to do. I have a router with specific numbers, so I can't change that on the TCP thing.
Please help.

hawknelson wrote:
I added the DNS numbers and safari is working, but what about my slow Firefox?
Your system uses DNS for its internet connection, so if it helps Safari it should have the same effect on Firefox. If Firefox is having problems when Safari is not, that's a problem specific to that program and you might want to pursue that on the forums dedicated to its support.

Very slow mac start up

Hello, my macbook pro runs snow leopard 10.6.8 and is very slow at start up.
I have encountered this ever since I configured linux Fedora dual boot with refit because it was an old version of Fedora. Now I have removed linux, refit etc. , but it loads the whitescreen, then bluescreen and eventually shows the account to login, but the whole thing takes 30 seconds! When it logs in it needs another 10 secs to be able to open applications. I have taken some steps to improve this, like: 1) removing login items, 2) removing useless stuff from caches and preferences of the Library, 3) deleting files and apps I don't use and empty the trash can, 4) verify disk with disk utility, 5) Update software, 6) Erase unused partition I made in the past with disk utility. At the Activity Monitor I don't see anything strange so far. Any advice to make it response faster, if you had this issue before?
Another issue is that I tried to change the user id some time ago, and now if I go to "Home-> Library -> Applications", there is no app showing up. I can go to the apps only from "Computer->Macintosh HD-> Applications" and from the dock off course. I don't know if that is important since it works anyway, or it plays a role for screwing up things.
I can probably update to Mavericks, but my colleagues had crashes with their software like Matlab and other applications after installing Mavericks, and I would like to avoid it if I can.
Please send some feedback, it is amazingly slow !

I don't know about your start-up problems, but...
...your Applications should be in your root Applications folder, not in "Home>Library>Applications"... while there is an Applications folder in Computer>Macintosh HD>User>Applications, there are usually few (if any) Applications actually located there.
So you're straight on that point.
As to your 'slow' startup problems, 30 seconds might not be so bad on a spinning hard drive - you'd be able to startup in half that time only with an SSD (again, depending on your startup items). I really don't see anything out of line there.
Clinton

MacBook suddenly very slow to start and operate

Sudenly last week my MacBook becomes very SLOW to start and to operate. Until last week it was working fine.
I do not believe to have perform anything abnormal and what is new is just the normal updating of the Softwares that is performed automaticlly every week.
I tried to shut down and restart several time.
I tried several time to reinstall Mac OS 10.6.8
I checked the hard disk with Disk utility and it results OK.
What to do ?
Thanks
Marc

Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you always have a minimum of 15% free disk space.
Why Is My Mac Running So Slow? [MacRx] | Cult of Mac

Mac os x lion 10.7 on mac book pro not updating and running very slow

i am using mac os x lion 10.7
problem it is not updating and running very slow. How to improve?

If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help to identify which such modifications you've installed, as well as some other aspects of the state of the system that may be pertinent.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: You copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, paste again. That's all there is to it. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, proceed anyway.
Below are instructions to run a UNIX shell script. It does nothing but produce human-readable output. However, you need to be cautious about running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
The script will line-wrap or scroll in your browser, but it's really a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
If you have more than one user, and the affected user is not an administrator, then please run the script twice: once while logged in as the affected user, and once as an administrator. The results may be different. The administrator is the user that is created automatically on a new computer when you start it for the first time. If you can't log in as an administrator, just run the script as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Triple-click anywhere in the line of text below on this page to select it:
clear; PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && o=$(sed 's/^/ /' <<< "$o") && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(egrep -v '^[[:blank:]]*($|#)' "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; a=$(id | grep -w '80(admin)'); [[ "$a" ]] && sudo true && r=1 || r=; { [[ "$a" ]] || echo $'No admin access\n'; [[ "$a" && ! "$r" ]] && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(($(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); PN "Pageouts (MiB)"; s=( $(sar -u 1 10 | sed '$!d') ); [[ ${s[4]} -lt 90 ]] && o=$( printf 'User %s%%\t\tSystem %s%%' ${s[1]} ${s[3]} ) || o=; PR "Total CPU usage" && o=$(ps acrx -o comm,ruid,%cpu | sed '2!d'); PR "Max %CPU by process (name, UID, %)"; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {/,}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; [ "$r" ] && { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; }; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2> /dev/null | pbcopy; exit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter your password, the script will run anyway, but it will produce less information. In most cases, the difference is not important, so don't worry about it.
The script may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "[Process completed]" to appear in the Terminal window.
You can then quit Terminal. The output of the script will have been copied to the Clipboard automatically. All you have to do is paste into a reply to this message by pressing command-V again.
Please note:
☞ This procedure is all copy-and-paste — type nothing in the Terminal window except your login password if and when prompted.
☞ Remember to post the output. It's already in the Clipboard when you see "[Process completed]" in the Terminal window. You don't have to copy the output; just paste into your web browser.
☞ If any personal information, such as your name or email address, appears in the output, anonymize it before posting. Usually that won't be necessary.

Iweb 08 hangs or very slow to start at times.

Hi all
Iweb 2.0.2 on mac osx 10.5.1 (leopard) at times very - very slow to start or quit - shown in activity monitor and "force quit" as "not responding". It does however eventually start and quit.
This problem appeared out of the blue and occurred at the same time as an internet problem.
After much grasping at straws I am now convinced that it is related to the internet problem (as strange as it may seem). During the hang, if I remove the ethernet cable (or start it without the cable) there is no problem. When the internet connection is ok - no problem.
I unchecked the "auto update" preference in iweb but no difference.
It almost seems that on startup and quit, iweb wants to communicate with god and cannot, so it gets all upset. (that's as techo as I can get here).
Has anyone found this problem or have an answer - mind you all ok if the network is ok. I have sent a "failure report to apple" after the force quit.
Paul

Thanks for the reply
♦ a unique ssid : It is the case . I use Home as SSID for 2.4 Ghz and Home_5G for 5 Ghz
♦ wpa2 personal/ aes encryption : Never thought using less than that
♦ a 5Ghz compatible adapter on the PC : I use an Intel 5100 adapter on my laptop that do both 2.4 and 5 Ghz. I use the 5Ghz band on my laptop and the main family PC that is connected with a netgear WNDA4100 N900 adapter. All the other PCs(5 in all) use 2.4Ghz . After disabling Wmm in QOS, i was not able to connect the 2 PCs using the 5Ghz band . They could connect using the 2.4 Ghz SSID though. Re-enabling Wmm allowed me to use 5Ghz again.
I have the Youtube problem on both the 2.4 and 5 Ghz band. As i said when i reconnect my old netgear router, no problems at all.

Since updating Firefox, Google appears as a string of foreign characers

Hi, since updating Firefox, as the title says, any google page just appears as a string of foreign characters. I've had pages like this before, but only when connecting to live streams. I've disabled all Google-related plugins and addons, but still the problem persists. The solution in the other thread to do with about:config (changing an option to 'true' failed. The only other difference to it is that it won't connect in http any more, just https. Any help?

Hey TheDefiniteArticle,
We've been tracking this issue for a few days now. What date did it start to occur? Wondering if it's an extension update or something.
# In the url bar, type about:config and hit enter. Confirm that you will be careful and proceed.
# In the search bar at the top of the page, past this text without the quotes "network.http.accept-encoding"
# This should narrow down the values in the config file to a single line. In the column that says "Value" please tell me what you see.
# This field should read "gzip, deflate" without the quotes. If that is not the value, double click on that field and paste this vale in.
# Restart Firefox and try a page that has had strange encoding previously.

Firefox browser very slow signing in and moving from one website to another

firefox browser very slow signing in and opening different websites.
== Operating system ==
Windows xp

Hello BJ.
This kind of issues are, unfortunately, more common and the we'd like. Thankfully, 99% of the cases are very easy to solve. However, you do need to diagnose what your exact problem is. Do this:
#run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe-mode] to disable all extensions, themes and plugins. If this fixes your issues, be them with RAM or CPU usage, then you know it's a problem with plugins, themes or extensions. Proceed to number 2. If safe-mode doesn't fix the issues, then read bellow, after this list;
#update all extensions, themes and plugins in your Firefox. If this doesn't solve the issues, proceed to the following number;
#disable all extensions, themes and plugins in your Firefox (not running safe-mode). Being certain that, as in safe-mode, the problems you're having have gone away, enable one plugin at a time. You should be certain that you WANT that plugin to be enabled, so keep your overall number of plugins as low as possible. When you encounter the problems, you know you've found a problematic plugin, so disable it for good. Keep enabling all plugins (except problematic ones) until you've gone through them all.
#enable one extension at a time. Again, be certain that you WANT that extension to be enabled, so keep your overall number of extensions as low as possible. Also, try the theme you want to have installed so see if that is what's causing the problem. When you encounter the problems, you know you've found a problematic extension/theme, so disable it for good. Keep enabling all your extensions (except problematic ones) until you've gone through them all;
#you're done! You've fixed your problems with problematic add-ons. If you want to keep using those problematic add-ons, please contant their author for support.
Ok, if disabling all extensions and plugins through safe-mode didn't work to bring Firefox's CPU and RAM usage to good levels, then you have different issue. The most likely scenario is that you have a third party software running on your computer that is messing with Firefox. Do as follows:
#try reinstally Firefox. No data will be lost. You can get the latest version for free at [http://www.getfirefox.com/ getfirefox.com]. If that doesn't fix the problem, proceed;
#do a virus/malware check on your computer. If this doesn't fix it, proceed;
#disable all software running in the background that you don't want to have running in the background (in windows, this is done by pressing WINDOWS+R in your keyboard, typing "msconfig" (without the commas) and pressing enter. Now, under the "Startup" tab, you can uncheck the software you don't want, and reboot your system for changes to take effect. If you're unsure of what software you want running, ask someone with more experience). If this doesn't fix your issues with Firefox, proceed;
#check your firewall/antivirus/security suite for enabled functions/features that you don't want and/or may be conflicting with Firefox. You'll find that these features are most likely tied to Internet Security features, such as link scanners or URL checkers and the like. If you're not sure they are conflicting with Firefox, simply try to disable them to see whether or not that's true. As long as you don't browse the web with your antivirus completely off and your firewall completely turned off, there should be no problems. If this doesn't solve the issues, proceed to the following number;
#check your operating system security options, mainly advanced options that are not configured by default. While it's very unlikely that this may be the cause of the problem (after all, it's the last item on the list), it's remotely possible. If this doesn't work, proceed to the following point;
#clean up your OS registry, using appropriate software. If this doesn't do it, I'm out of ideas. Except make sure you've followed my instructions correctly.

Firefox is very slow to respond when opening and nearly always stops responding altogether even refusing to react to Task Manager "End Program@ command. The "not responding@ error message also comes up during navigation on line.

Firefox is very slow to respond when opening and nearly always stops responding altogether, even refusing to react to the Task Manager "End Program" command. The "not responding" error message also comes up during navigation on line. Several attempt have to be made to get on line. A loss of stability seems to be endemic at the moment.

Try following the instructions here: [[Firefox hangs]]

My Apple iPad 3 is less than 6 months old - purchased in March of 2012. I believe it already needs a new battery. It will not hold a charge for very long andvs very slow in starting up a carge when I plug it in. Please advise - it is very annoying.n.

My Apple iPad 3 is less than 6 months old - purchased in March of 2012. I believe it already needs a new battery. It will not hold a charge for very long andvs very slow in starting up a carge when I plug it in. Please advise - it is very annoying.

Take it to Apple Store. You are covered under your 1 year warranty.

I have HP Simple Pass on my HHP laptop & all saved passwords are no longer avail since updating Firefox.

All of my saved passwords that I could enter by swiping my finger on my HP laptop with SimplePass are no longer useable since updating Firefox. I receive the following error message every time I try to use Simple Pass: "Firefox doesn't know how to open this address, because the protocol (dpql) isn't associated with any program,"

Digital Persona got out of the consumer touch pad software business, and HP selected Egistec to handle HP Simple Pass.
https://support.mozilla.com/en-US/questions/808105#answer-173165
http://www.egistec.com/websitedownload/patch/bioexcess/HPSimPlePass7.0.74.0.zip

Flash CS5 very slow to start up

My version of Flash CS5 has recently become very slow to start up, taking well over a minute sometimes.
It appears to stall for the longest time during a loading process called "...Loading Accelerators" (yes, very ironic).
Anyone have any idea what may be causing this behaviour?
Mac Pro running Mac OSX 10.6.7 (Snow Leopard) and 14Gb RAM.

Yes I am using Sophos!
Do Sophos have a feature/bug request page? This is one feature I can do without!
Thanks for your help.

Since updating firefox, the virginia gov site times out. no problem with other sites

Since updating firefox a couple day ago, I get 'The connection has timed out
The server at www.tax.virginia.gov is taking too long to respond''
when I try to get on that site. I had to email my payment info to a friend to pay my sales tax. (She could get on the site) I have no problem getting on other sites.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Since updating my iphone 4S it has started showing no service, i have gone into the apple store and they couldn't fix it does anyone have any suggestions?

Since updating my iphone 4S it has started showing no service, i have gone into the apple store and they couldn't fix it does anyone have any suggestions?

They offered to value my iPhone and then put that money towards buying me out of my contract however I don't want to have to spend more money when my contract ends on august anyway.

Since update 36 firefox is very slow to start (over 1 min)

Similar Messages

Maybe you are looking for