Since update Bluetooth mouse doesn't detect

Updated last night, with new security update & may have also updated bluetooth firmware and since then my Microsoft bluetooth mouse doesn't detect, it worked perfectly before. Bluetooth detects phone so it is working. Are there any fixes to this?

Tried everything. Even tried detect new device. Mouse is definately working on other computer.
Tried Open Bluetooth Setup Assistant at Startup. At startup bluetooth icon briefly shows connected for a few seconds, then nothing.
Seems a lot of people on forum have lost mouse/keyboard connectivity since updating last night.
Would appreciate any help. Trackpad is def no comparison for photoshop etc.

Similar Messages

  • Microsoft Designer Bluetooth Mouse is not detected in 10.10.3

    Microsoft Designer Bluetooth Mouse is not getting detected as a bluetooth mouse on OSX 10.10.3. During pairing, it just shows up as a bluetoth device and after some time, there is a popup that no mouse is connected. Also, when you try to add the mouse though Mouse->Add a Bluetooth Mouse screen, the mouse is not gettng detected.
    But the mouse works once its paired, but its not seen as a Mouse by OSX. Its just being detected as a generic bluetooth device.

    Its listed in the data sheet for the product. But the microsoft site does not show the same in compatibility list

  • Since update extended wifi doesn't work

    I updated my express extreme as required. Since my airport express that I use to extend my wifi doesn't work anymore. I did a reset and when I try to configuration it keeps telling me that an error has occurred and that I should try again.

    I reset modem and router.  Still have the same issue.  I have a laptop connected to the network as well as a PS3.  Both are working great.  Did a Speedtest app test on iphone.  With 3g it was working good.  When i switched to wifi, it was trying to get the ping test accomplished, and could not.  it was stuck in the ping test at 0% for a long time and never progress. 

  • 10.6.5 Update - Bluetooth Mouse not Connecting

    First off, the fact that exfat/fat64 is now supported is an absolute Godsend. That solves a good 75% of the problems I have dealing with a mixed environment.
    However, Once I updated an iMac 5,1 (intel) when the machine boots I have to push the "discover" button and wait a minute for the mouse to be seen at the login screen. Sometimes it won't be recognized at all and I have to plug in a USB mouse to get things going.
    I reapplied the full update and that had no effect. Then I tried repairing the mouse - no change.

    Bueller? Bueller?

  • Since updating Firefox, Dashlane doesn't work, but I am told you are working on it? When can I expect it to work again?

    I updated Firefox and started to use it again, after having problems with it freezing and crashing. I had used it for years, but suddenly it was not working well and I went to Safari. When they indicated an update to Firefox, I updated it and started to again use it, as I always liked the way it worked and most of my Bookmarks were still good. I found that Dashlane did not work with it and I have been told you are aware of this and working on the problem. Please notify me when it is solved, as I want to continue to use Firefox but have to switch back to another browser to get to my bank or stock brokers site. For the record, I use a MacBook with OS 10.6.8.

    Could you check to make sure Dashlane is up-to-date? Two other Mac users this week reported success:
    * [https://support.mozilla.org/questions/1030201 Updated to Firefox 33.1 on my MAC 10.10. My dashlane icon was grayed out (was a green dot) next to menu icon. How can I reactivate Dashlane?] - reinstalled from Dashlane site (4 days ago)
    * [https://support.mozilla.org/questions/1032480 Dashlane add-on doesn't work after update firefox 33.1.1] - updated from app store (today)

  • In Macpro mid 2010 system, after updating 10.7.5 bluetooth mouse does not work

    After System updating bluetooth mouse is not working ,please give the suggetion.

    My suggestion is please post in the correct forum, this is a forum for iMac's. The Mac Pro forum is listed at:
    https://discussions.apple.com/community/desktop_computers/mac_pro

  • New firmware but Creative software doesn't detect Zen To

    I installed new firmware (a story in itself) but since then creative software doesn't detect my player. It works fine through Real player (but slow) and Media player but I preferred the creative software. I have installed updated software but still the same. Not much joy as yet from Creative and I have tried troubleshooting which involves sync-ing with Windows media but it just froze most of the time and was incredibly slow. After rolling back Media player 0 I re-installed but same thing happened.Anyone have any ideas?

    I have had the same problem. I've tried to update the firmware and now thw PC software does nor recognise the zen. Tried everthing and in the process of seding it back to creative. Anyone any ideas. could be cheaper to buy something else that works longer than 4 months.

  • Hp bluetooth mouse x7500 cant be found

    I have installed the HP mouse suite 2.9, but the hp bluetooth mouse x7500 cant be found there. Same problem on both my computers.
    The mouse is working well otherwise.

    OK, according to the specs of your Lenovo, it is Bluetooth 4.0 enabled and should be compatible with the HP mouse.
    However...
    Since this Bluetooth Mouse does not come with a dongle that would install a driver via usb, the computer relys on the drivers installed for the radio in the bluetooth card in the laptop.
    I think this is a question for the Lenovo forums.
    In the specs for the T430, I saw Bluetooth driver downloads for the various versions of Windows available.
    I would check with Lenovo support first as you may need to install that.

  • Since updating to iOS 8.1 my Bluetooth doesn't detect any devices

    Since updating to iOS 8.1 my Bluetooth doesn't detect any devices

    Good Morning Denise -
    Sorry to hear you are having issues connecting to your Wi-Fi network.  I'll include a few more things that you can try to troubleshoot this below.  The first thing that I'm wondering is if you cannot connect to your Wi-Fi at home -- are you able to connect to a different Wi-Fi network (at work, a local coffee shop, etc.)?  That would be one of the first things to try.
    Turning the modem and router in your house of and then on is also a common step as it "reinitializes" everything.  Hopefully, one of the steps below will help you with this.
    If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
    http://support.apple.com/en-us/HT204051
    Restart.
    For more help, try restarting your device, router, or cable/DSL modem. After each step, check to see if you fixed the issue.
      • Restart your iOS device.
      • Unplug your router and plug it back in.
      • Unplug your cable or DSL modem and plug it back in.
    Still can’t connect?
    Reset your Network Settings. Tap Settings > General > Reset > Reset Network Settings. This also resets Wi-Fi networks and passwords, cellular settings, and VPN and APN settings that you’ve used before.
    Get more help
    Try connecting to a Wi-Fi network in a different location. If your device can connect, you’ll need to get help with your Wi-Fi network. If it can’t connect to any Wi-Fi networks, contact Apple.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points - Apple Support
    http://support.apple.com/en-us/HT202068
    All the best,
    - Judy

  • Since last update on itunes, my PC doesn't detect any of my devices. HELP!

    Since I downloaded the last version of iTunes my PC doesn't detect any of my devices (ipad, ipod, iphone). Have been connecting my devices to the PC, when opening iTunes there is a legend, with the ipod saying that itunes doesnt detect the device to uninstall itunes and reinstall, have done it twice and the problem is still there. Just bought a new ipad and when I connect it to the PC iTunes doesnt detect it. When connecting my iPhone same thing happens, when I try to export the photos to the PC the folder where the photos are suppossed to be has no photos

    Hello andreaparra,
    Thanks for using Apple Support Communities.
    I found the following article that will help you in resolving this issue, where none of your devices are being recognized by iTunes.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If you get to the part where it asks you to uninstall iTunes, even though you have done it before, be sure to uninstall iTunes and the other components in the order listed.
    Take care,
    Alex H.

  • Bluetooth Mouse Driver Issues after updating to SP1

    Greetings!
    After upgrading to SP1 my bluetooth mouse stopped working.  The dongle I'm using is being detected fine, and when I scan for the mouse I can find it, but when I try to connect to it I get a "Locate driver" message from Vista.  When I let it scan for the driver it is unable to find anything compatible, so when I tell it to scan the CD that came with it again it finds nothing.  It's like the Bluetooth HID Device driver is no longer working.
    This is the dongle:
    http://us.kensington.com/html/9403.html
    This is the mouse:
    http://us.kensington.com/html/12635.html
    Some of the things I've tried:
    Uninstalling and reinstalling the WIDCOMM Bluetooth stack.  I've tried using Vista's Bluetooth stack instead of the WIDCOMM stack, with no luck.
    I've also tried the Bluesoleil drivers with no luck there either, in fact those seem to break the dongle and Vista is no longer able to detect it.
    I've tried the install CD that came with the mouse, but it seems that is for Windows XP only.
    I've tried another Bluetooth mouse that produces the exact same results, with a CD that is for Vista.
    Anyone else having this issue?

    Just wanted to update this with an answer.
    I'm pretty sure that running vsp1cln.exe was the reason why my Bluetooth and iPod stopped working.  I reinstalled Vista and upgraded to SP1 without running that tool to clean up the install files and both bluetooth and my iPod are working again.  It must clean up the driver files that they were using and the new files are not compatible or something.  Not sure really.

  • After updating OS X 10.8.5, bluetooth is not available in the menu bar. The Magic Mouse is recognized and working but the bluetooth mouse functions do not work.

    After updating OS X 10.8.5, bluetooth is not available in the menu bar.
    The Magic Mouse is recognized and working but the bluetooth mouse functions do not work.
    I have downloaded and installed 10.8.5 combo but it does not help.
    Menu bar - System Preferences/ there is no bluetooth item
    I restarted with cmd + alt + P + R it doesn't help.

    Did you try the suggestions from your other post on this?

  • Bluetooth mouse won't pair after recent os updates

    Hi there,
    Since I installed the two updates for snow leopard yesterday my bluetooth mouse will not pair.
    I go to setup bluetooth device & when i press the button to make it discoverable it appears right
    away so I click contnue & after a short while get the error message 'The pairing attempt was
    unsuccessful. This configuration of Mac OSX & bluetooth software could be invalid or unsupported'.
    On the initial discovery screen the messages 'searching for devices - one found' then 'updating 1
    device name' appear. Have just tried pairing it on another windows system & it works fine!
    Any advice appreciated.

    If using a 3rd party mouse, check with its manufacturer to determine if they have compatible drivers.
    If using Apple's mouse, post in the Mouse Bluetooth forum area.

  • Iphone 4 bluetooth connectivity problems since updating to ios 5.01

    My wife and I both have an Iphone 4 through verizon.  I updated my ios to 5.01.  Hers is still 4.3.10.  Since updating mine the bluetooth feature have gone crazy.  When I get in my truck (2008 Nissan Frontier) it just continually connects and disconnects with the built in blue tooth system in that vehicle.  I cannot make or take a call on the system it just keeps dropping the connection then re-connecting.  Funny thing is my wife's phone doesn't have this problem.  It connects and functions normally.
    I wanted to just roll back ios 5.0.1 but I've found out you aren't allowed to do that.  Nissan has no updates for their bluetooth system either.
    I have gone the extreme of completely wiping out my iphone and re-installing everything fresh and that has done nothing.  I have also tried completely deleting all the phone saved in the truck's system and re-setting them up and that too has done nothing to fix the problem.
    Anyone have a suggestion?  I have to think that there is something in ios 5.0.1 that is messed up with bluetooth.

    Interesting discussion. I too am having connection issues with an original iPad. I have an olde' linksys wrt54gs router with a Linksys RE1000 wireless extender (repeater). I can connect to the router just fine when I'm in range but can't use the repeater signal on this iPad only. Even when I'm right on top of it. One thing that may have helped is changing from WPA2 to simple WPA encryption in the routers settings. So far (crosses fingers), it's working ok.
    -Jim

  • I was wanted to update my iphone but the computer doesn't detected?

    was trying to update my iphone with new software and backed up and everything but then something happened and the computer doesn't detected oit but is shows is charging and on iphone screen says connect to itunes?

    Your iPhone has probably gone into recovery mode. Since, you have already backed up the iPhone there is nothing to worry about. Please follow this article, it would certainly resolve your issue
    http://support.apple.com/kb/HT1808
    Feel free to reply if you have any confusion.

Maybe you are looking for