Since updating iTunes, having playback sound issues
Updated iTunes so that I could install iOS 5. Now when using iTunes for playback from my library on my iMac the sound is TERRIBLE. Really low volume, muddy sound. Volume on everything else is fine, so it isn't a speaker issue. Volume was fine a few days ago, so I'm assuming that it is an iTunes 10.5 (141) issue.
I'm now having the same sound problem with my AAC audiobook files. Couldn't yet sa if it's all the files or just some of the newly imported ones.
They now playback with noticable aliasing as if their bitrate has been significantly lowered.
Horrible to listen to music that now sounds like an AM radio broadcast.
Gonna wait and hope to see if a fix will come this week.
Also noticed that some of the same type files don't correctly copy into my iTunes library for some reason.
Goofy,
MC
Similar Messages
-
Since updating to 706 the sound on my ipad2 is not working right--on videos or music. There is distortion and some kind of interference at all times. Any ideas?
Has the unit EVER been jailbroke?
If "No," first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this. -
Since updating iTunes and Mavericks, every time I import m4v files into iTunes it re-names all the files to "Avidemux". what's gone wrong?
(By the way, would I need to use also the red and white phono cables also to get sound?)
Yes, S-video cables do not carry sound.
When you import 16:9 into DV Widescreen, make sure that you have UNchecked 'automatic letterboxing'.
In Preferences, is the project set to the correct standard?
29.95 fps = NTSC
25 fps = PAL.
BTW, this is actually the iMovie 5 forum, but no matter! -
TS1538 Since updating itunes to latest version, my ipad, iphone will no longer sync
Since updating itunes to the latest version, my ipad, iphone will no longer sync
Update your Mac OS X to v10.6.8
Click your Apple menu (top left in your screen) then click Software Update.... -
HT1473 Since updating iTunes I no longer have a menu to access - how do I change this?
Since updating iTunes I no longer have a menu to access - how do I change this?
Try COMMAND+B
tt2 -
since updating itunes yesterday I now can't open it and get a pop up box about the procedure entry point not being located. anyone able to help?
these are the boxes that open up:
I am unsure as to wether I need to unistall and start again but then worry about the vast amount of songs already in the folder that I would have to reload.anyone able to help me with the above?
-
since updating itunes and the software on my iphone 3 I am NO LONGER able to play my videos on the iphone! They're bought videos through itunes that I could play before. Annoying. Can someone please let me know which software *****? iphone/itunes update?
OH and before you say "use the video app" that's what is no longer working..since updating itunes and the software on my iphone 3 I am NO LONGER able to play my videos on the iphone! They're bought videos through itunes that I could play before. Annoying. Can someone please let me know which software *****? iphone/itunes update?
OH and before you say "use the video app" that's what is no longer working.. -
HT3819 Why can't I get Home Sharing to work since updating iTunes to 11.1?
Why can't I get home Sharing to work since updating iTunes to 11.1?
Did you restart your router? Did you check Firewall settings?
See http://support.apple.com/kb/TS2972 -
hi guys since updating itunes i can now no longer sync my iphone or ipad, tunes is saying it is not picking it up. i have trued uninstalling and re installing but still nothing. any ideas?
its very annoying, ive tried heaps of things
-
Since downloading itunes 10, playback is distorted
Since downloading itunes 10, playback is distorted. I have reloaded to repair, but no change.
I have ipod nano 6th gen.You're not alone my friend. Join one of the bigger threads, they have some advice on downgrading to 10.4 with instructions on how to do it. Otherwise you can join the waiting game.
-
Since updating my IPhone 4S to the new IOS 7.0.6 my phones sounds has been cutting in and out since, my ringtone works fine, when typing on the keyboard it will cut in and out for a few seconds, also even when I connect headphones they cut out too! Has anyone else been experiencing theses issues since updating or know how to fix it it's very frustrating not being able to even listen to one song without it cutting out.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Since updating my Itunes software some time ago, I've not been able to add my own artwork,ie album covers, to my own personal albums.Used to be able to go to "File," "Get Info" and drag/drop my photo into the artwork box, hit save/OK and Voila! No longer and it's Really frustrating. It will let me drag it there but it
won't save it or display it. (Why they go and break somethin' that was working fine?....just an aside) What must one do now to display their own artwork for albums that are non purchasable online?Winter 7 wrote:
Thanks again. Though I'm not really tech savy, I don't believe this issue has to do with Tags.
it has everyrhing to do with tags.
The artwork is stoed in the Artwork tag field.
Since WAV files do not have tags, there is no where to store the tags.
If you use iTunes to get artwork for WAV files, it puts themn into the AlbumArt folder adn links it to the correct files via the iTunes library.itl file.
All other formats (MP3, AAC, AIFF, Apple Lossless) have na artwork tag to store the artwork in the media file itself.
in the past, to add my own personal artwork,
Not to WAV files. You must have imported them as a different format. -
I run windows 7. Have been unable to open itunes since updating last week. I have uninstalled itunes and reinstalled, and have checked run as administrator, but still can no open. I notice that there is now a shield with yellow and blue squares next to it, that i do not think were there before.
many thanks, Mary.
The ModName is ituneup.dll; the modver is 1.0.7.0.
Do you have the TuneUp plugin installed for your iTunes? If so, I think your copy is causing the issue here. Try the following document:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
... does that help with the launch errors? -
Poll: Who is having no sound issues with X-Fi Titanium Fatal1ty Pro?
Several weeks ago I purchased an? X-Fi Titanium Fatalty Pro. I have the latest drivers/software installed for all of my hardware and am using Windows 7 64-bit ultimate. There is no sound when the computer resumes from Standby or hibernate. I have to disable the driver in the device manager and then re-enable to restore sound. It seems the X-fi driver is not initializing when the computer resumes from these states. Problem does not occur during a normal cold start or restart.
i have an open ticket with creative support and need to find out if others are having the same issue on windows 7. Several folks having the same issue at this link with little to no success at fixing. I don't know if this is a driver thing, an IRC conflict or what. I have no had this issue on the same hardware with any other sound cards I've I had, to include an HT Omega card and the onboard sound; which leaves me convinced it is something with the X-fi card.
Please respond to this posting if you are having the same issue. If you have found a way to fix it, please say so as the creative support folks are still investigating and have asked me to give them more examples.Just to confirm that deselecting entries in the "headphone detection" tab the creative audio panel seems to provide a temporary (but not an acceptable permanent) solution.
"Automatically mute speakers" provides the workaround but "automatically enable headphone settings" also needs to be deselected otherwise the PC will set to "headphone" on resume (rather than "5:" for example).
So it could be that on resuming from standby it is setting some internal headphone settings to mute the speakers.
I have created a support ticket hoping that this and the other post above might bring about a driver update.
Will keep testing and post any updates. -
I recently updated iTunes to version 10.3.1.55. Since then when I try to sync my IPod classic it says on the top of iTunes (where the barbers pole is) "Step 1of1 Determining Tracks to Sync". This stays like that for about 15 minutes before a message pops up saying "Itunes could not copy ""song title name here"" to the Ipod because an unknown error occurred (-50)". This message pos up for every song title that has been added to itunes since the itunes update. Therefore I am unable to sync any new music. This only happens when syncing the ipod as the iphone syncs with no problems.
Does any one have a solution?There's a good guide here on how to roll back to 10.7 https://discussions.apple.com/thread/4559563?tstart=0
Maybe you are looking for
-
How to connect USB superdrive with macbook pro?
How do I connect my USB SuperDrive with my MacBookPro?
-
When I try and purchase from itunes I receive the following message: Your Purchase Could Not Be Completed For assistance, contact iTunes Support at www.apple.com/support/itunes/ww/. I have contacted Apple support on 4 occassions and each time they te
-
Create proxy to an object created by a wcf service class
Hi We are trying to develop a WCF Service which is configured as per-session. The service object creates another object which has some data + functions, and has its own Interface which is available on both client and server. Is it possible to somehow
-
How can I create a trigger that executes on a certain day of a month?
-
HI! looks like i am missing something. I am following the documentaion for the weblogic portal to create a new portal app called myportal by copying the stockportal example under the application/portal directory. I follow all the steps and am able to