Since updating my ipad to IOS 6.0.1, when I move my apps around and press the home button to stop them shaking, it switches my ipad off and back on again
SInce updating my ipad 2 to IOS 6.0.1, when I try to rearrange my apps and press the home button to stop them shaking it turns my ipad off, then it shows the apple sign on the screen and comes back on, but the apps are back in the places they was before I tried to move them. Anyone any ideas how to stop this?
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom
Similar Messages
-
My iPad frequently locks up, even after updating to iOS 7.1. When it locks up it's nonresponsive to the home button and the only remedy is to force a shut down and reboot. Help!
DEVICE NOT RECOGNISED IN ITUNES
If you have connected your device to your computer and it does not appear in the side bar in iTunes then for Windows computers read http://support.apple.com/kb/TS1538 or if you have a MAC then read http://support.apple.com/kb/ts1591 for troubleshooting steps. -
My Mini Ipad Does not return to the Home screen after I press the Home button
My Mini Ipad Does not return to the Home screen after I press the Home button. I have also tried to turn it off and it is not responding.
Check the following:
1. Check credit card number
2. Check security code
3. Billing Address must be the same as credit card
4. Check expiry date
5. Make sure you have sufficient fund -
I updated to iOS 8 on my iPhone 5 yesterday and now when I press the home button even once, it opens the app switcher (which is supposed to only open after pressing the home button twice quickly). Sometimes pressing the home button once even brings up the assistive button (which for me should take three button presses). This did not happen before I updated my software. Has anyone else had this issue? Know how to stop it? Very annoying and at this point feel like I should have waited before I did the update.
Hello ..do you have a history on the phone? did you get it wet? was it dropped? have you been using an authentic ORIGINAL apple charging cable?
this problem occurs when there is a short circuit in the phone... you most likely got it wet at some point and maybe didnt even realize it? The moisture in the phone hasb probablly oxidized one or several capacitors, integrated chips thereby short circuiting the phone. that is why he phone is acting erratic because these short circuits inadvertently "activates" other circuits.. eventually the phone will not turn on anymore- the heat will stress the citcuit board and you will have discontinuity along your main power lines and the phone will cease to function..i see this alllll the time in our shop
the fact you upgraded to ios6 will even work the phone harder because its a more powerful operating system taking full advantage of the A4 chip.. -
this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thankswell in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone. -
If I press the home button it says ipad not set up then gives me the option to continue I press that and am back to a screen which says joining other network, can't press anything on that. It's been like it for about half an hour now. help.
Hello Netski1961,
Thank you for using Apple Support Communities!
I have 2 recommendations here. First from article iOS: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430:
Restarting your iOS device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
After the device has turned off, press and hold the Sleep/Wake button until the Apple logo appears.
If you are unable to continue, try resetting the phone with this from the same article:
Resetting your device
If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears.
Cheers,
Sterling -
When reading my downloaded paper the Safari page sometimes comes up and I have to press the Home button and start all over again but same thing happens. I even made sure the paper download was the first thing I did on my Ipad and that no other apps were open.
Have you tried a Reset (No Data will be Lost)
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
When I press the home button my iPad won't go to he home page. It is as though the button isn't working properly?
Try this to calibrate your home button:
Open a stock iOS app (e.g., Clock). Once the app is open, press your iPad’s power button until the ‘slide to power off’ screen appears. From that screen, press and hold your Home button until iOS force quits the stock app you have open. You’re done! -
I updated my iOS to 7 yesterday. But my music app doesn't show the 'Radio' button as the online videos and Apple website claims. What could be the reason and how to fix it. All other apps, swipe up/down seem to be working fine.
Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Before that, back up your device, explained here:
iOS: Back up and restore your iOS device with iCloud or iTunes
How to back up your data and set up as a new device
You can check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do -
I have a iPhone and iPad on one iTunes account, I have recently bought two further I touches fir the kids , should I set them up with their own apple ids and the can I transfer purchases through all devices,
Hi jhyiesla,
Im not sure wether I got you right or not. But my advice/s would be as follows:
These steps help you get rid of old apps you downloaded years ago and you do not use anymore.(Also frees space on your mac after emptying the trash)
1) go to iTunes and delete all applications in it. Make sure to move them to trash! Do not empty your trash yet. Its your backup if step 3 doesnt appear.
2) connect both your devices(one after each other) and make a backup. !!!Dont press the Sync button, press the Back Up Now Button
3) Then it asks you if you want to backup applications as well. Confirm. (This is how apps get transferred manually)
4) Then Sync your devices... The first time it might be, that there are some additional apps loaded to your devices you dont want to.. delete them on your Device (not iTunes) and after that you should be good every time you sync again.
5) now you can empty your trash on your mac.
Further,
- You should regularly connect your devices with iTunes to make sure they are backed up. (Even if you have activated iCloud backup, the iTunes backup is more proper i.e.. Apps)
- If you hate scrolling through a list of apps in iTunes, you can re/install apps directly on iOS not via iTunes. I absolutely never go to the "Applications" section in iTunes. I install and delete apps directly on iOS.
jl -
After installing 8.2 on my iPad (2nd gen) all the apps crash during use. It appears that the iPad saves a version of what I was using because after the app crashes I double press the home button an there is a screen of an older version of the page I was using. I swipe it away and start over, only to have the same thing happen again. I have reinstalled all the apps, rebooted, synced and re-synced with iTunes. This is VERY irritating!
That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it... -
i am trying to unlock my ipod, i have done all the steps, disconnected and held the home button but it keeps saying try again. how do i get it to unlock
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by: -
Okay so i was updating someone picture in my contacts it kept loading for a long time so i held the home button and the power button it slowly went black like it faded out and went black i tried everything i dont even know what wrong i been had a crack on my phone and like i can see thats its light so like what do i do cause i tried plugging it into the computer and stuff and the computer dosent even bring up the logo which means the computer dosent reconize that my iphone is plugged in i had this problem before except it went white pleaase help
Hi supreme_babes,
If the display on your iPhone is black or isn't responding, you may find the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Regards,
- Brenden -
How can i delete the new feature "get in contact with your favourite persons"?? When u press the "home" button twice, theres a list on top of the ipad with the last persons youve been in contact with. How do i delete that, or some of them ;-) Sorry for the danish
You can turn that feature off in Settings>Mail, contacts, calendars>Contacts>Show in App Switcher>Recents>Off.
-
I have a mac book pro running Lion 10.7.4 and every time I use Google Earth The computer crashes by lowering a black curtain and then asking me to hold the power button down until it closes and press the power button again to restart it. Can I fix this? It bugs me when I'm looking at real estate.
I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.
Maybe you are looking for
-
The effects and sample caching bug is horrendous in my opinion. It's been there for years. It wastes huge amounts of my time. While there are some things you can do to minimize these glitches, there are NO 100% reliable work arounds. If you work in L
-
Disable the characteristic window in sales order and user-exit to pick up
Hi Freinds, I am working on 1 VC assignment in which 1. I have to pick up the characteristic values selected in VA02 in sales order before saving the change sales order. 2. I have to Disable the characteristic window (with characteristic name and val
-
Hi, I have a brand new imac which i got today and when I open Iphoto all i get is the error message "Your photo library is either in use by another application or has become unreadable" any ideas? thanks
-
Iphone shows no service?
I bought a new iphone 4 and when i put my sim card it shows no service
-
How to supress '-' sign for commission (MPP)
hello, i have a requirement as i have to pass the commission values in the table control there if i have 2 .00 the valve is passed int to the table control but for 2 .00 - the program is getting terminated. so how can i supress the negative sign, an