Since updating to 10.9.2 iTunes starts automatically when watching movies via Safari, that annoys

Hi
since the most recent update, iTunes starts automatically. I can quit iTunes at least 10 times since it finally stops to launch.
Any idea, why?
thanks in advance

Thanks for your helpful hint, but unfortunatly it did not solve the problem. I know, its rather difficult to explain:
I use the same order on MacBook Pro & Mac Mini (sorted by name in descending order). Both display the photos in iphoto correct as follows:
"20111009 London
20111008 Festival
20110924 Marriage
20110820 Summer
20110617 Italy
20110524 Spring
...etc...
20030101 Wintertrip"
But on apple tv 2 - only when using the Mac Mini as the source - the order is wrong like this (on apple tv 2):
"20110924 Marriage
20110820 Summer
20110617 Italy
20110524 Spring
...etc...
20030101 Wintertrip
20111008 Festival
20111009 London"
Using my MacBook Pro as source for the apple tv 2: everything is fine, the sort order on my apple tv 2 is correct. I imported "20111008 Festival" and "20111009 London" both after the update to iOS5, when I returned from London. I updated my Mac Mini, MacBook Pro and my apple tv 2 (ios5, iphoto 9.2 and iTunes 10.5).
I did another test and changed the sort order on the Mac Mini to be sorted by date and in ascending order. This had no effect to the way the photos are displayed on apple tv 2. The photos are still displayed wrong as described above ("20111008 Festival" and "20111009 London" are put to the very end). It seems, as if apple tv 2 does simple ignore the sort order given by Mac Mini. On apple tv 2 I have to scroll down to the very end to watch my Festival photos and my London photos.
I have two apple tv 2 and the problem is just the same. This is why I thought it might be a problem of my Mac Minis iphoto library or the way it is transmitted via iTunes.
E.

Similar Messages

  • Since updating my ipad to IOS 6.0.1, when I move my apps around and press the home button to stop them shaking, it switches my ipad off and back on again

    SInce updating my ipad 2 to IOS 6.0.1, when I try to rearrange my apps and press the home button to stop them shaking it turns my ipad off, then it shows the apple sign on the screen and comes back on, but the apps are back in the places they was before I tried to move them. Anyone any ideas how to stop this?

    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • ITunes starts automatically when turning my computer on

    ITunes on OS X 10.10 automatically starts when I turn my computer on. My iPhone is not connected. I tried going through System preferences > User & Groups >Login items but ITunes is not on the list of applications that I want to open automatically. Can someone please help?

    Shutdown the computer. You will see a dialog:
    Uncheck the option to reopen windows. Now open General preferences in System preferences. Check the box labeled Close windows when quitting ....

  • HELP. Screen seems to start flicker when watching move/playing games?

    Hello there.
    I could really use some help.
    Im having this problem that my screen freezes and start flimmering. I have some idea's of what can be trickering it. Because it happens when i watch movies or trying to play games.
    It looks like this: https://www.youtube.com/watch?v=jxoMhBOyx8E
    NOT THAT THE COMPUTER ON THE LINK IS NOT MINE.
    Im looking forward for help!
    Christoffer, 23 from Denmark.

    Hello christoffer153,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where you're having flickering on your display, please follow the steps in the article linked to below.]
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    Take care,
    Alex H.

  • I have a 4s with the latest 6.0.1 update and windows 7 with iTunes 11. When I connect the phone, windows can see but iTunes doesn't. Have tried re-installs and re-starts. Anybody else have this problem

    I have a 4s with the latest 6.0.1 update and windows 7 with iTunes 11. When I connect the phone, windows can see but iTunes doesn't. Have tried re-installs and re-starts. Anybody else have this problem?

    Did you go through all the options?
    Also this:
    Also, third-party security software may conflict with iOS devices connecting to iTunes. Follow this article to troubleshoot issues that may be caused by your security software. After resolving any issues you may have with your security software, you may need to try the steps in this article again.

  • Since updating my iphone 4S it has started showing no service, i have gone into the apple store and they couldn't fix it does anyone have any suggestions?

    Since updating my iphone 4S it has started showing no service, i have gone into the apple store and they couldn't fix it does anyone have any suggestions?

    They offered to value my iPhone and then put that money towards buying me out of my contract however I don't want to have to spend more money when my contract ends on august anyway.

  • My iTunes v.10.6.3.25 is intermittently refusing to open. Sometimes re-booting my laptop works, sometimes not. I just put the computer to sleep, and when I woke it up, iTunes started automatically. Any thoughts?

    My iTunes v.10.6.3.25 is intermittently refusing to open. Sometimes re-booting my laptop works, sometimes not. I just put the computer to sleep, and when I woke it up, iTunes started automatically (I had been trying to open it just before by clicking on a song file in my Documents window, and that's the song that started playing when the pc woke up). I went to my iTunes Help and clicked Updates/download iTunes 10.7 twice, but got nothing. Now, Im wondering if I should downloacd the entire 10.7, or whether that would overwrite all my files, erasing my songs. Anybody know? Thanks.

    Hey thanks for replying.
    Here's what I did:
    First I tried the Winsock reset in the Command prompt. Nothing changed.
    Next, I tried the instructions on http://http://support.apple.com/kb/TS4123. The only other program that came up on the 'Winsock Providers' tab on the program was 2 Windows Live applications, which I can do without. So I deleted all Windows Live Applications.
    I did the Winsock reset in the Command Prompt again and rebooted my comp.
    Unfortunately, nothing has changed. iTunes keeps freezing at various stages of the sync, then shows the candy cane-striped bar with either the words 'Finishing sync' or 'Cancelling sync', before showing the Apple logo.
    Sometimes, iTunes gets to the syncing stage - "Copying # of ####" - where it will trudge through the first, second and third tracks before flashing "Copying 4 of ####" for a split second and I catch "Cancelling sync" briefly before the Apple logo appears.
    Again, I've repeated the steps I mentioned in my previous post. Does ANYONE know when the new version of iTunes is set to be released?! This one is driving me INSANE, to say the least!!

  • I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes.  Any ideas?

    I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes.  Any ideas?  I am on Windows 8.1 and my iPod is a Classic

    Hi murr18140,
    Welcome to the Support Communities!  The article below will help you troubleshoot the issue you are having with your iPod classic not being recognized in iTunes for Windows:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363?viewlocale=en_US
    I hope this information helps ....
    - Judy

  • ITunes does not start automatically when iPod is connected

    iTunes used to start automatically when I connected iTunes. It no longer does. Can I fix that?
    Dave

    Connect your iPod and open iTunes. Towards the bottom of the iPod screen, there are four check boxes. The top one says "Open iTunes when iPod is connected." Check that box and click apply. If it is checked, uncheck it and click apply, eject and reconnect your iPod, then recheck it and click apply.

  • ITunes does not start automatically when iPhone is connected

    Have just upgraded to LION.  iTuneshelper in Login items is now not found and iTunes will not start automatically when an iPhone is connected via USB.

    Hi,
    See this Discussion:
    https://discussions.apple.com/message/15693777#15693777
    Cheers,  

  • ITunes does not start automatically when I plug in my iPHONE.  When I start it manually it does not recognize my phone although the phone is visible in My Computer.

    Itunes does not start automatically when I plug in my iPhone.  When I start it manually, it never recognizes the phone although it does ask if I want to download pictures etc.  Many albums have no art work that use to.  iTunes completely unresponsive to the mouse.

    Hi billm1013,
    I'm sorry to hear you are having these issues with your iPhone. If your iPhone isn't being recognized in iTunes, and/or iTunes isn't responding to your mouse when the iPhone is connected, you may find the troubleshooting steps outlined in the following article helpful:
    If you don't see your connected device in iTunes for Mac - Apple Support
    Regards,
    - Brenden

  • ITunes doesn't start automatically when ipod is connected.

    Even though I have clicked on the place that says itunes will start automatically when iPod is connected to pc, it doesn't. I have to click on iTunes everytime, and then it takes a while to run.
    Anyone have any ideas what might be the problem?

    hi joyful!
    just checking. reboot the PC, and prior to launching itunes or plugging in the ipod, bring up your Task Manager to the "processes" tab.
    is there an iTunesHelper.exe running in your processes?
    Background processes installed with iTunes 6 for Windows
    love, b

  • How do I make it so that itunes doesn't start automatically when windows starts?

    How do I make it so that itunes doesn't start automatically when windows starts?

    http://support.apple.com/kb/HT5449
    http://support.apple.com/kb/PH11443
    http://support.apple.com/kb/PH11428

  • Itunes will not start automatically when iphone plugged in

    itunes will not start automatically when iphone is plugged in.  it used to.  now it turns on iphoto but not itunes.  the option to check "open itunes when this iphone is connected" is ghosted and cannot be selected.
    i have ios 5 now, but it also did this with the previous os.

    Hi billm1013,
    I'm sorry to hear you are having these issues with your iPhone. If your iPhone isn't being recognized in iTunes, and/or iTunes isn't responding to your mouse when the iPhone is connected, you may find the troubleshooting steps outlined in the following article helpful:
    If you don't see your connected device in iTunes for Mac - Apple Support
    Regards,
    - Brenden

  • Approval Workflow does not update the Content Approval status if started automatically

    Hi,
    I’m using a simple Approval Workflow associated with
    Content Approval on site pages. It works fine when I set it to be started manually (by using
    Allow this workflow to be manually started by an authenticated user with Edit Item permissions
     option) and on the completion of the workflow the
    Content Approval status is updated accordingly. But when I set it to be started automatically (by using
    Start this workflow when a new item is created
     / Start this workflow when an item is changed
    options), it does not updates the Content Approval status. Note that I’ve set the
    Update the approval status after the workflow is completed (use this workflow to control content approval)
    option to true.
    Regards

    Hello,
    It is recommended to select "Start this workflow to approve publishing a major version of an item" when you want to use the workflow to manage content approval for
    a library.
    According to the Notes for “Enable Content Approval” option in
    this reference:
    If you are using this Approval workflow to manage content approval (moderation) for a library, and you selected the Start this workflow to approve publishing a major version
    of an item check box on the Add a Workflow page..
    If you did not select the Start this workflow to approve publishing a major version of an item check box on the Add a Workflow page because you do not want this workflow to
    be the default content approval workflow for a library, you can select the Update the approval status (use this workflow to control content approval) check box to make this workflow a secondary content approval workflow that specific users can
    start manually.
    That means having an approval workflow start automatically when a document is changed or created is not a good practice when you want to use the workflow to manage
    content approval for a library. You should either select "Start this workflow to approve publishing a major version of an item" or give users the option to start the workflow manually at the time they want to submit for an approval.
    Thanks & Regards.
    Lily Wu

Maybe you are looking for

  • Any ideas on how to keep the speed of computer up?

    I have had my computer for about 6 months now, and notice my mac is starting to slow down. any ideas?

  • Question on Siebel/JDE integration

    I am a long time Siebel developer and am fairly new to JDE EnterpriseOne. My company has initiated a switch from Siebel 7.5.3 Service to JDE. The idea is to convert the Siebel data into the JDE database, but I am questioning this approach. Does anyon

  • Not running in background mode 'N'

    hi experts,,,,, i have a  small issues in my BDC where i face problem when running in background if i update in 'A' mode its get updated whereas in background 'N' mode it doesnt take the changes and CHANGES NOT  GETTING REFLECTED/... can you pls help

  • How to make the attributes  colors  in oaf pages

    Hi Friends This is karna, I want to chage attribute colores in oaf page how it is posible \

  • Text description

    hi , FORM GET_DATA .    select vbeln kunnr audat waerk bstnk bstdk from vbak into TABLE it_vbak where vbeln in P_sale.    select * from vbap into table it_vbap for all ENTRIES IN it_vbak where vbeln = it_vbak-vbeln.   select vbeln inco1 zterm from vb