Since updating to iTunes 11 music no longer shows up in Aperture Slideshows
Since updating to iTunes 11 I can no longer see iTunes music in the Aperture browser for slideshows, it also seems that import of audio doesn't work.
Do you see iTunes in other applications - Pages, iMovie? If not, you may need to rebuild your iTunes library, see:http://support.apple.com/kb/ht1451
For me, iTunes '11 works very well with Aperture 3.4.3.
Regards
Léonie
Similar Messages
-
Since updating my iTunes I no longer have any controls. iTune covers the entire desktop and I cannot add from my files. Prior to updating I had a perfectly good iTunes which would allow me to stories for including on a iPod.
Can anyone please advise me.From my post on what seems like the same issue (found here: https://discussions.apple.com/message/21087892#21087892)
Take the following steps:
1) while connected to wifi, toggle off then back on the Show All Music and iTunes Match options shown in my original post. Important: I did this step before, but wasn't connected to wifi, and my music disappeared. Subsequently, I connected to wifi and turned off and then back on those options and everything came back though it was grayed out and my only option was to download music.
2) To get streaming over cellular back, go into Settings>General>Cellular and scroll down to the "Use Cellular Data for:" options and make sure the iTunes option is set to 'On'
The above steps will bring back the streaming capability which seemed to go away when you update to 6.1. It didn't ACTUALLY go away, but something about the update toggled off the iTunes option in step 2 above.
I did a final test by turning off wifi, opening Music app and selecting a song. It played successfully without downloading! Crossing my fingers, but I think I'm good to go!
Hope this helps! -
My Apple TV 1st gen will now no longer play any of our iTunes music, although it shows a speaker symbol when you select play on the track. Please help?
Are you streaming or syncing you music? Sounds like you're streaming music directly from iTunes.
There can be many different issues. First, try power-cycling you wireless router (leave router disconnected for about 1 or 2 minutes) to refresh the wireless communication betweek both devices.
Make sure all software updates have been installed, for Apple TV and iTunes. -
I have done my updates and itunes is no longer recognizing my iphone as a device. My phone shows that it is plugged in but when I open itunes, my iphone doesn't come up as a device.
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
-Griff W. -
itunes app no longer showing genres or the top charts/genius bar in the top bar ... it only displays a faint music in the centre with just the search box..why? i need them back:-(
The iTunes Store listing of your podcast is simply reflecting the contents of your podcast feed. Make sure all of the content you want displayed in the iTunes Store is still contained within your feed.
Are you able to supply your feed for reference? -
After updating my iTunes it no longer acknowledges that my iPod or iPhone is connected so I can't update my music.. I have followed all of these steps and everything is working fine but this new version of iTunes isn't recognizing my devices. Any advice?
I have the same problem. Running Win 8 64Bit, updated to latest ITunes and now will not recognize phone or pad. Followed all advice from Apple (uninstall/restart/re-install, all in exact order) ... nothing. Spoke with Apple tech and walked through the whole process, but no resolution. Tech was trying to be helpful but has no way of addressing issue.
-
Since updating to iTunes 11.0.03 my ION Turntable fails to upload music on PC. Process Works up to point that it tries to upload . Turntable still works on laptop with older iTunes version
Your question involves too much detailed reading for me, but here's the way to create a custom ringtone for your iPhone on your Mac:
Use GarageBand.
Check Help > Create Ringtone there. -
Since updating to itunes 11, Home Sharing is not working
Since updating to itunes 11, Home Sharing is not working.
I am running Windows 7, 64-bit.
All mobile devices are up to date with ios, including 2 apple tvs (2 & 3), iphone 4s and 3gs, ipad1 & ipad2.
I've rebooted twice, turned home sharing off, then signed back in. Still nothing. Rebooted the mobile devices. No joy.
Curiously, wi-fi sync is also not working - the devices are not showing up in itunes unless I plug them in.
Please Help!Yes, you guessed. After some rebbots it stopped working again .So it seems it is not a Firewall issue. Kept looking and found a suggestion in a forum to disable IPv6, apparently iTunes for Windows doesn't work well with IPv6. So I did, and after several rebbots and tests, both Home Sharing and Apple TV 1st Gen are working. To disable IPv6, follow this link
http://support.microsoft.com/kb/929852
It has an MS Fix It that will do it for you. Or if you wnat to go manual, follow this discussion, this guy was having the same issue several months ago
https://discussions.apple.com/thread/3507281?start=75&tstart=0
So far IPv6 is just being rolled out, and it will be a few years until everybody abandons IPv4 and go only with IPv6, so you shouldn't have any issues disabling it. And by then iTunes -I hope- should be fixed to work correctly with IPv6. Try it, and if you find any issues you can always enable IPv6 using another MS Fix it program, or manually reverse what you did
Hope it is fixed this time! -
Unable to sync Ical from Iphone 4 to MacBook since updating to Itunes 11.
I am unable to sync Ical from my Iphone 4 to MacBook since updating to Itunes 11. (and yes, the Iphone shows up as recognised in the sidebar and will sync Ical from Macbook to Iphone.) All ideas welcome.
If Damon's suggestion of resetting sync history doesn't fix the problem you most likely have a bad contact record in iCal. When they sync encounters the bad record it doesn't know what to do with it so it stops. To fix it you must find the bad record, open it, make a small change, and save it. An easy way to find the bad record is to create a new group and set the iPhone to sync to this group. Put a few records into the group at a time, then sync. At some point the sync will fail or hang. You have then narrowed the problem to a few records.
-
Cant sync my iphone 4s since updating to itunes 11?
cant sync my iphone 4s since updating to itunes 11 - any suggestions?
Thanks for your message.
I have downloaded the latest iTunes [11.1.5 (5)] with no luck, unfortunately. As it did with 11.1.4 (62), iTunes recognizes my iPhone, I can select the music to sync, click sync, it appears to sync but remains completely unchanged in my iPhone music.
Any tips are welcome! -
After installing the most recent iTunes update/version iTunes will no longer run on my PC (Windows 7). I receive multiple error windows with the Microsoft error code R6034. Microsoft's Help site states that this error occurs when a driver attempts to access the C++ library without a "Manifest". I do not know what a manifest is, but apparently any attempt to directly access the C++ library is not permitted. The site instructs the viewer to contact the application developer.
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I cannot download the update for itunes - music stored on external drive as computer got full up - download error state invalid "H" drive ? anyone have any ideas ? Cheers
See "Invalid drive X:\" install errors.
tt2 -
How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display.
There are two things we use the name "Slideshow" for in Aperture: a Slideshow Album, used for making Slideshows, and the Slideshow that is made. (Imho, it is a design mistake to not call the containers used to create Slideshows, Books, etc., "Albums".)
The Slideshow will use the Album Pick from any Stack. A good way to use Aperture is to promote the Image you want to regularly use (such as, for example, a Version with adjustments) to the top of the Stack. This makes it the Stack Pick, and will be the default Album Pick. If you haven't done that, you can still change the Album Pick for any Stack in a Slideshow Album. Expand your Stack(s), select the Image in each Stack that you want to be the Album Pick (and thus shown in the Slideshow), and "Stacks➞Set Album Pick". (Note the keyboard shortcut; there is also a Toolbar icon for this.) The change is immediate. The Slideshow will always show the Album Pick (or, if there is not one, the Stack Pick) for every Stack in your Slideshow Album. -
TS2972 since i updated my itunes it will not show up on apple tv
Any idea how to get my apple tv to show up on computer menu. it worked perfectly before i updated my itunes. Any ideas?
Ok, I figured it out. What I did is added it to purchased on Apple TV playlist, (it should have been there in the first place), and then I put a check next to it. Bam back on the big screen. I never edited the playlists, so I have no idea how it was removed in the first place, or for that matter, why it even has to be there in order it to sync. I hope this helps someone out in the future. Thanks for the input and the interest.
-
HT203167 Music no longer showing in 'purchased'
Some songs on a previously purchased album are cutting off mid-song. I want to download the album again but it no longer shows in 'Store>Purchased'. I checked my purchase history and it shows there... odd?
I checked the forums and troubleshooted with the Cloud and that is not the issue. It seems as though the 'Purchased' section only lists recently purchased items... but nothing from +12 months past.
Any help is appreciatedHi MeltedBlue,
Your Purchased items do not exist under Purchased in the Store on the sidebar. You have to click on iTunes Store (open the store), and then click on the Music tab. Then, on the right side, you will see Quick Links. Click on the Purchased there.
A screen willl come up with the same tabs you see in the Store - Music, Apps, Movies, etc.
Clic on the Music tab and then click on All Songs or on a specific Artist. You can also click on Not on This Computer, or on All at the top.
You will then see all of your Purchased songs. If they have a cloud next to them, you can re-download them - either individually, or by clicking Download All at the bottom.
If a cloud is not showing, it means the item is still in your iTunes Library, and needs to be deleted before you can re-download.
Cheers,
GB
Maybe you are looking for
-
How do I get the itunes icon to appear in the quick launch bar?
I installed an update to the current version and lost the quick launch bar icon for iTunes. How can I get it back? self built Windows XP Pro
-
Change price in material master
Dear Experts, May I know how we can change std. price that maintained in material master. I believe t/code MR21 use to change price for MOP (moving average price) but I'm not sure for std. price. *Please assist me how we can use MR21 & what are the i
-
Apple mail formatting Question
I just bought a MBAir and in using Apple mail I cannot seem to format email replies to contain an extra two lines of blank space above the original email. Is there a way to format email replies to do this automatically?
-
I am somewhat new to flex, and my question feels extremely stupid and simple but i can't figure it out. I created a site that uses a simple timer to rotate through images whos location is provided by a PHP doc and XML In IE the site works perfect. In
-
Dynamically loaded swf to communicate with MovieClip on the stage
I have a heck of time here with an issue. I have an xml document that when a certain button on the stage is clicked it loads it's corresponding external swf into an empty movieclip on the stage. This empty movie clip is a holder for all external swfs