SINCE UPDATING TO OSX MAVERICKS I HAVE SOME ISSUES..PLS ADVISE

First thing i noticed,is that swiping between pages in LAUNCHPAD is unresponsive,sometimes i just CAN'T swipe to other page...THIS IS KIND of a HUGE DEAL...WHY????? I NEVER HAD ANY PROBLEM WITH TRACKPAD?(scrolling in safari,swiping in other apps,going to mission control is without any problem,that's why its so weird...It just wont work in LAUNCHPAD)
Second problem,in my launchpad appeared an icon called READ ME UPDATE right after updating to OSX MAVERICKS....Thing is,i cant open it,i cant delete it,i cant do anything with it...WHATS HAPPENING??
And my LAST issue is also very ironic,because MAVERICKS promised better power management,but so far,whatever app i open and use,my FAN goes like crazy,from my totally silent MACBOOK became a HOWLING MONSTER...(this issue also came up right after updating to MAVERICKS,i didnt download anything after this update,just to be clear that no viruses could have gotten into my Mac by my fault)
Apple PLEASE DO SOMETHING..
So far updating to OSX MAVERICKS only brought issues to my,MacBook Air i NEVER HAD...
PLEASE ADVISE SOMEONE

To help determine the possible causes of this behaviour read the following.
EtreCheck will not fix anything, but it will provide additional information required to advance troubleshooting:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
http://www.etresoft.com/etrecheck
Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or "failed".
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.

Similar Messages

HT204291 Since updating to OSX Mavericks, my airplay icon is missing

Since updating to OSX Mavericks my airplay icon is missing from my IMac (3.06GHZ). However, it is present and working completely appropriately on my Macbook Pro with Retina display. Both have the same OSX, Apple TV is fully updated. I have reset my computers, appleTV, routers, iTunes multiple times, but it's just my IMac that is having the problems displaying the Airplay icon. Not sure what else can be done or why one computer works while the other doesn't when the settings are otherwise the same. Airplay worked on it without problem before the patch.

1) open control panel.
2)Choose Network and internet
3)Select the VIEW NETWORK STATUS TASKS under NETWORK and SHARING CENTER section
4) Choose the active network connection. It is usually name " wireless Network Connection 1" or something similiar.
5) Click the properties button
6) If the Internet PROTOCOL VERSION 6(TCP/IPv6) is checked, uncheck it, then click OK.
7) Click CLOSE
8) Restart iTunes and try to use the Home Sharing feature again.

DONT update to OSX Mavericks. Network drop out since update....

Hey Guys,
Ever since i updated to OSX Mavericks i have been having problems with my network.
Before the update i could stream directly from my USB HDD thats connected to my airport extreme with absolutly no problems at all..
Since the update it has turned to sh**.. sometimes i can connect to the apple tv and sometimes i cant. If i can connect to the apple TV or even my Pioneer Receiver which has airplay built in, when streaming is doenst keep up. it will work for 5 secs then stops. if i walk more then 7metres away with either my Mac or iphone it completely cuts out.. then it wont connect.. streaming from the USB (that connect to the Airport extreme) doesnt work anymore. it just keeps trying to load but doesnt do anything..
this has only started to happen since the mavericks update a few months and im over this problem......
please help..
cheers

To help determine the possible causes of this behaviour read the following.
EtreCheck will not fix anything, but it will provide additional information required to advance troubleshooting:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
http://www.etresoft.com/etrecheck
Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or "failed".
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.

Keep receiving "USB Over Current Notices" since updating to OSX 10.6.8. I have no devices plugged into my Imac and running everything wireless. SMB/PRAM resetting did not work. Does anyone have some advice or can help?

Keep receiving "USB Over Current Notices" since updating to OSX 10.6.8. I have no devices plugged into my Imac and running everything wireless. SMC/PRAM resetting did not work. Does anyone have some advice or can help?

Hi Melissa,
Pretty strange, but...
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, does it happen in Safe Mode? Reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Export Error in LR 5.2 since update to OSX 10.9 Maverick!!

Hi all
i have a real problem with LR 5.2 since update to OSX 10.9. the Export function crash with a error. "Unable to Export"
This Error only occurs when i choose the Function: Export to: Choose folder later (useful for presets)
The same error occusrs when i choose the function "Open Catalog"
Always when LR call the Finder from OSX 10.9 the Function in LR crash.
under OSX 10.8.5, it never was a problem.
please i need help because without the export and the open catalog function LR is useless.
thanks for tipps an help
Cheers Tinu2808
MacBook Pro Retina 15" with 8GB Ram and 256 GB SSD OSX 10.9 Maverick, LR5.2

Okay .. after EVERYTHING was working WELL I made the mistake of taking an ADOBE UPDATE to my Photoshop CC. Directly following THAT update (from ADOBE) both LR and PS fail as before. Since ONLY Adobe made changes to my computer, how can Apple be the culprit? As a matter of fact, even though my coverflow is NOT on, both LR and PS open their diaglogs in that view and I am unable to change that. Certainly my Adobe programs are revealing this issue. It sounds from your note above that Adobe is just treating it like an Apple issue.
Fortunately I did take a Time Machine backup BEFORE installing the Adobe updates so I can roll back.
UPDATE:
I opened InDesign and the open dialog opened in CoverFlow and failed. The next time I used the open dialog I quickly changed the view to details (InDesign runs a little slower so I was able to do that). Once I had changed the view, no problems .. all fixed (in InDesign)
Since I had successfully changed the view from CF to details in InDesign, I figured "maybe" all the adobe programs would recognize the change. I then successfully opened Photoshop, which now opens with the details view and is successful.
At least I know HOW to make it work if it gets messed up again .. which happens whenever I update an Adobe program.
My finder was in DETAIL view before and after my updates.
The ONLY place where coverflow showed up was in the Adobe programs.

I am trying to download and install OSX Mavericks but everytime i input my Apple ID it keeps asking to review my account and then starts looking for credit card info, I do not have a credit card, also I thought OSX Mavericks was free, some help please.

I am trying to download and install OSX Mavericks but everytime i input my Apple ID it keeps asking to review my account and then starts looking for credit card info, I do not have a credit card, also I thought OSX Mavericks was free, some help please.

Yes I know it's free, but Im trying to find out how to download it and install, but I keep getting account review and asked for CC details as I have no CC I can't get the download or install it, any help please, what i don't understand is why would I be asked for CC details if it is a free download ?? i just want to know is there anything I can do.

Hi, since my update to OSX Yosemite, I have problems opening DW and AI CS6. A message with update to old Java SE-6 is displayed? How can I solve this problem? Thanks

Hi,since my update to OSX Yosemite,I have problems opening DW and AI CS6. A message with update to old Java SE-6 is displayed?Thx

You need to install Java SE 6 to run those programs. There has been quite a bit of discussion here about that. Something at one of these links should get you going...
Prompted to install Java SE 6 Runtime | Mac OS 10.9
Dreamweaver and Java SE 6 Runtime problem on MAC Mountain Lion OSX

Illustrator (CS 5.1) crashes after update to OSX Mavericks (10.9)

Illustrator 5.1 crashes while starting the app after update to OSX Mavericks (10.9)
What can I do?

If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault boot volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. Never install crapware such as "CleanMyMac" or "Cocktail."
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Java broken in FF6 / Safari since updating to OSX 10.6.8 from 10.6.7

Hi All,
I have been having huge issues with what appear to be java source components of web pages since updating my OSX back in July.
The problems are as follows:
Web based booking engines (for flights at Airasia, Bangkok Air) load up without any flight options (or will not load up)
My internet banking "timeout" occurs immediately upon succesfful login to my user area
I have tried the following approaches to trouble shoot
- Alternative browsers (FF / Safari) - the problem is constant across both
- Cache and history have been cleared for both browsers - still no success
- Both browsers are set to accept 3rd party cookies, and javascript has been ennabled on both
- Flash player checked to ensure it is the most current.
I have also checked the functionality of the web pages and their content on Windows - it's definitely something that is limited to mac , although I have been unnable to check against another mac at present.
This is about the limit of my troubleshooting abilities, as I am only new to mac this year, and am not a particularly savvy techno-logiclal person.
HELP! Would really like to be able to
-find the problem
-fix it
- prevent recurrence
Cheeers,
Katie

Hi Katie,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

After updating my mac book pro to the osx yosemite.am getting some issues after starting up.a soon as it gets on the destop the screen start blinkingand i cant do anything

After updating my mac book pro to the osx yosemite.am getting some issues after starting up.as soon as it gets on the destop the screen start blinking and i cant do anything.Please help me!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

After Update to OSX Mavericks 10.9.2 Apps are malfunctioning

Hello,
I recently updated to OSX Mavericks 10.9.2 and i've been having difficulty.
The Following Native applications are not opening at all.
Mac App Store
Facetime
Photo Booth
Preview
Terminal
Quicktime Player
Any Solutions?
Will be greatly appreciated.
Thanks!

If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault boot volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. Never install crapware such as "CleanMyMac" or "Cocktail."
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Updated to OSX Maverick, the adaptor to use a projector no longer works.

Help,
I work in various schools and have to use multiple different projectors. I updated to OSX Maverick and my adaptor no longer works. My computer seems to be recognizing the projector but the projector isn't recognizing my computer. Any suggestions would be greatly appreciated.
Thank you

Hey CMMcC!
Here is an article that will help you troubleshoot this issue with your connection to this projector:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thanks for using the Apple Support Communities. Have a good one!
-Braden

HT6114 am having internet disconnected since i upgrade osx mavericks

since i updated to osx mavericks my wifi keep disconecting wile am on the net
any solution plz
thanks

OS X Mavericks
You will find all the public information about OS X Mavericks here: Apple Releases Developer Preview of OS X Mavericks with 200+ New Features.
We are all users, too, so we don't know anything more about Mavericks than you.
For more information on the features of iOS 7 see: Apple - OS X Mavericks.

Paralells will not load since upgrading to osx mavericks

has anybody had trouble loading Parallels 8 since upgrading to OSX Mavericks?

Critical and Urgent:
Service Alert for Parallels Desktop 8 Users Upgrading to Mavericks - October 23, 2013!
If you intend to upgrade to Mac OS X Mavericks (10.9), and are running Parallels Desktop 8 for Mac, you must be running the most recent update (build 8.0.18608). Select "Check for Updates" in the Parallels Desktop menu or click here.
from:
http://www.parallels.com/products/desktop/

Since updating iTunes and Mavericks, every time I import m4v files into iTunes it renames all the files to "Avidemux". what's gone wrong?

Since updating iTunes and Mavericks, every time I import m4v files into iTunes it re-names all the files to "Avidemux". what's gone wrong?

(By the way, would I need to use also the red and white phono cables also to get sound?)
Yes, S-video cables do not carry sound.
When you import 16:9 into DV Widescreen, make sure that you have UNchecked 'automatic letterboxing'.
In Preferences, is the project set to the correct standard?
29.95 fps = NTSC
25 fps = PAL.
BTW, this is actually the iMovie 5 forum, but no matter!

SINCE UPDATING TO OSX MAVERICKS I HAVE SOME ISSUES..PLS ADVISE

Similar Messages

Maybe you are looking for