Since updating to the latest version of iTunes, I have been unable to sync ANY of my devices (iPod
I recently updated to the latest version of iTunes. Since updating, iTunes does not recognize any of my devices (iPod or iPhone).
When I plug in my iPhone it doesn't even recognize that it is plugged into the computer (although the cord works and the USB port is good).
When I plug in my iPod (on the same cord) an error message pops up in iTunes and immediately kicks/ejects. "An iPod has been detected, but it could not be identified properly..."
Please help!
Follow these instructions to completely remove Apple software
http://support.apple.com/kb/HT1923
Then use free Ccleaner to repeatly repair your registry until it's fixed.
http://www.piriform.com/ccleaner/download/standard
download iTunes again from Apple.
Your content will remain.
Similar Messages
-
I have recently upgraded my itunes to the latest version and it has deleted my current playlists and any music i have uploaded since the last upgrade. this is really frustrating as i have lost over 800 songs. and now have to redo my playlists. any suggestions on how i can fix this.
Follow these instructions to completely remove Apple software
http://support.apple.com/kb/HT1923
Then use free Ccleaner to repeatly repair your registry until it's fixed.
http://www.piriform.com/ccleaner/download/standard
download iTunes again from Apple.
Your content will remain. -
Since updating to the latest version of iTunes (11) I cannot find the files that I need to export from apps on my iPhone to my Desktop PC
Follow these instructions to completely remove Apple software
http://support.apple.com/kb/HT1923
Then use free Ccleaner to repeatly repair your registry until it's fixed.
http://www.piriform.com/ccleaner/download/standard
download iTunes again from Apple.
Your content will remain. -
I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes. Any ideas? I am on Windows 8.1 and my iPod is a Classic
Hi murr18140,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iPod classic not being recognized in iTunes for Windows:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363?viewlocale=en_US
I hope this information helps ....
- Judy -
I did a system restore on my computer. When I had it up and running again, I downloaded the latest version of itunes. Now I can't sync apps to my sons ipod. What can I do to fix this?
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar and Control+B to show the Menu bar
To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing and follow the instructions. -
I just updated to the latest version of iTunes and now it will not sync with my iPhone 5
I just updated to the latest version of iTunes and now it wont detect my iPhone 5 to sync. Can anyone help? I am running on Windows 8.
I have already gone into control panel and repaired the program. Nothing is working!See the tt2 user tips for help:Troubleshooting issues with iTunes for Windows updates
-
So I have a Mac iBook and it says I'm on the latest version of iTunes but when I plug in my iPhone it says that I need a newer version And I want to move music onto my phone, what do I do?
If you have an iBook G4, (PPC) you can't do much.
But if that is a MacBook (intel) you may be able to
upgrade the OS X, if the hardware is up to it...
Since there were about nine different build models
of MacBook (not powerpc iBook) to identify what
one you have would be the first step to knowing
what OS X and RAM upgrades it could use.
If the computer is not already at OS X 10.6.8,
it can't go online to get or use OS X 10.7.5. So,
when you more accurately describe the 'Book,
detailed information is available.
When you find the serial number, there is a web
page that can be used to identify by serial no.
http://www.powerbookmedic.com/identify-mac-serial.php
That'd be a first step. Or even the Model number
which should be visible on the outer case by hinge.
Good luck & happy computing! -
Since I installed the latest version of iTunes I have been unable to sync new downloads to my ipod. Prior to this installation I would get 2 windows when I attached my ipod but now there is only one. The software does not recognise the device (I tried running the doagnostic) but I can see it on my desktop. Anyone know what I can do?
Hi findmeat,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
About iTunes Radio
http://support.apple.com/kb/HT5848
Cheers,
- Judy -
Since I downloaded the latest version of iTunes, my remote app on iPad and iPhone does not recognise ,or connect to, my iTunes library... Any ideas ?
Hi Pittgo76,
If you appear to missing your iTunes library after a recent update, you may find the following article helpful:
Apple Support: No content shows up in iTunes after updating
http://support.apple.com/kb/ts1967
Regards,
- Brenden -
I can't update to the latest version of iTunes - complains that iTunes10.7.dmg is corrupt?
Surely iTunes should be upgraded automatically? It always has in the past.
Typically a computer does not automatically update itself. This would be highly undesirable in my opinion. What if it was it started doing it just as you were going to do a presentation? I have never heard of iTunes automatically updating itself.
Why do I have to download it again?
You can let Software Update do this if you wish.
And why from the Apple website and not the itunes website?
What iTunes web site? The "iTunes website" is the Apple web site.
And if I do, wont I lose all my playlists, the info from my old phone etc.
No, you shouldn't but once a month somebody complains here than an update wiped their iTunes collection. Not sure I believe them since i don't see how it could do it, but you should always back up first.
I have just bought an iphone 5, delivered today, which wont sync with 10.6.3.
Correct. An iPhone 5 requires iTunes 10.7
When I try to upgrade via iTunes, it tells me that I have the latest version.
Maybe it is the latest version your computer can run with the operrating system version you are using.
At this point I am just going to say it is polite to leave this topic to answer the questions of the original poster (OP). You are facing a pretty different set of issues and you should start your own topic where we can focus on your issues and not get it all muddled up with the OP's. -
My Iphone 4 crahsed a few months ago when I tried to update and i have used Itunes already and it updated to the latest version of itunes but it says there is an erro and cannot be restored, I'm not sure why it is saying that, can I get some help?
Hi Alyssa_fagundes,
Thanks for the question. Based on what you stated, it seems like you need help restoring an iOS device. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Cheers,
Mario -
Device not recognized in iTunes for Windows
I wasted about 1.5 hours with Apple on this issue. It all started happening after I updated to the latest version of iTunes. I haven't been able to sync my iPhone 4 in 1 month and am freaking out about possibly losing my pictures, video, text messages and music.
Windows XP user.
Any help will be greatly appreciated.
iPhone 4, iOS 5.1.1If might be helpful if you actually told us what the problem is.
-
I just updated to the latest version of itunes, n ow when I plug in my iphone, it says it cannot sync because "apple mobile device service is not started" this never happen before, what do I do??
The Apple Mobile Device Service is a part of sever programs that "help" iTunes on Windows. It may have been disabled in the Microsoft program, msconfig, or using a third party utility, such as CCleaner.
I would suggest trying to find and enable the service. To do so, click on the start button, click "run", and then type "msconfig" look for the iTunes Helper entry and make sure that it's enabled.
Additionally, there may be another service which you will have to enable. You can type something like "service.msc", (I'm not sure exactly) to see the "Services" control panel and look for it there.
If you can't find either, feel free to post here again.
Message was edited by: MoshBerm -
recently updated to the latest version of Itunes (11.1) and when i try to play music or tv shows, the sound lasts only for a second before going completely mute, anyone know how to fix this?
Check this thread out -> iTunes 10.4 & Multimedia Keyboard
It doesn't look like there is a fix yet, but some people in the thread are pointing to this workaround:
pikot wrote:
Following some suggestion i seem to have found a solution for the problem and my play/pause, next and previous buttons work with iTunes 10.4.1
- You need to open a text editor (like notepad) as an administrator.
- Open the SetPoint players.ini file (C:\Program Files\Logitech\SetPointP\players.ini)
- Edit the line under the [Players] section to match the line bellow (bold is the wndClass which is to be changed)
iTunes=wac,iTunes.exe,ITWindow,xxx,xxx,xxx,xxx,xxx,xxx,xxx,0,1,iTunes
- Save the file
- Restart the SetPoint and hopefully play/pause, next and previous buttons should work (at least they work for me) -
When I start iTunes, how do I get rid of the message "To use this machine for downloads, enter you Apple ID and password" which I now see twice since I downloaded the latest version of iTunes. Once is enough and no checkbox exists to say "do not show this message....."
Does this apply?
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
Maybe you are looking for
-
Can "h:selectOneListbox" be used for navigation?
I have an application that will be made up of several .war files. Each .war file is an application in itself. In other words, this is still considered as one big application, but for development purposes, each "feature" of the one big application is
-
Report with cost center, Wbs element and cost element
Dear Experts, I am creating Income Statement report with report painter using table CCSS. In this report, I need cost centers, cost elements/ GL accounts and WBS elements. Report is okay except sales. Because my cost elements for revenue are created
-
Email Notification is approved but BPM Task is not getting completed
Hi, A transaction is submitted, the approver gets a email notification. The Human task is Actionable. So in the email, approver can see Approve / Reject links. On clicking the links it generates a email response and it is sent to the server als
-
Any way to remove an Apple TV from iPod AirPlay?
I don't remember how this has come to be but whenever I connect to wifi, I get the option to connect to an Apple TV, which I do not even own. Whenever I usually view media, this is the first option that selected and I fear that my music or videos are
-
Howto make a class paint itself when initialized?
Hi! This class is a subclass of Circle, the main class. I want this class to display an image and a string when i initialize it from Circle, and I have tried everything. I'm quite new to Java, please help me! (I don't get any errors or exceptoins whe