Since upgrade my ringtones don't work

ringtones don't work on my iPhone since upgrade. It shows them on my contacts, but I get normal ring when I get a call.

hello, make sure your ringtones are still in your itunes library under the "ringtones" area.
Then if they are in your library, try dragging them again to your phone... especially if you are missing you music too!
That should fix it!
For some reason, some of the music/ringtones ddn't make it on the upgrade of iOS 5.
Good luck!

Similar Messages

Since the iOS7 upgrade my iMessages don't work all the time.

Since the iOS7 upgrade my iMessages don't work all the time. The will work for for a few days, but then all of a sudden they stop working. They are still activated in settings, but not sending. If I turn on and off my phone they work again for a while and then stop again. I'm not sure if turning off and on my phone again is re-activating the iMessages which is why they start to work again for a while. But it's a pain having to turn off and on my phone each time, and when sending an iMessage not knowing whether it's going to send this time or not is a bigger pain. Also everytime I turn off and on my phone (which i think is re-activating the iMessages) a text is sent to the following UK number: +447786205094 - so it's costing me each time!
Is there a fix for this?

Turning off and back on or hard reset seems to work for a day or two. After resetting I am occasionally losing messages that were there before reset. In addition, I have had 3 messages that I received a notification for when they came in but go into messages and not there. Message incon still shows 3 unread messages but when I open messages I have no unread messages??? Power on-off or hard reset does not seem to fix this. At least a reset gets imessages working again. Hope fix is out soon. This is a PIA.

How to stop the Sending USSD message on my iPad since upgrading. The eKit SIMM worked fine on my older iPad. Thanks

How to stop the Sending USSD message on my iPad since upgrading. The eKit SIMM worked fine on my older iPad. Thanks

Wiping my phone, restoring from backup, AND wiping all iTunes related files (from a search in Library and in Music) seems to have stopped this behavior.
(I couldn't wipe the iTunes files on the machine with my media and apps, but I did so on the other machine--where I only sync contacts, calendars and bookmarks. My iTunes library is empty there anyway.)
I don't know if this relates to an "app synching" issue that iTunes 9.0.1 fixed. Could be.

Ringtones don't work iOS8

I got the most recent update and all my ringtones, including the factory pre-installed ringtones, don't work or play when called or texted.

Hi x_NINJA_,
If you are getting no sound when your iPhone should be ringing for an incoming call I would suggest that you troubleshoot using the steps in this article -
iPhone: No ring or sound from built-in speaker
Thanks for using Apple Support Communities.
Best,
Brett L

Ringtones don't work since iOS4 installed

SInce I installed iOS4 (including the upgrade subsequently), ringtones I select for different contacts don't work - all I get is the default.
Anyone seen this? Any solutions?

hello, make sure your ringtones are still in your itunes library under the "ringtones" area.
Then if they are in your library, try dragging them again to your phone... especially if you are missing you music too!
That should fix it!
For some reason, some of the music/ringtones ddn't make it on the upgrade of iOS 5.
Good luck!

My ringtones don't work with iphone6

Upgraded to iPhone6
My ringtones don't seem to have transferred - I see them in iTunes, but they are not "assigned" to the correct contacts.
When I go to each contact, and look thru the ringtone options, my (purchased) ringtones are not available??
Appreciate the help
Bill

@JerryC58
It's important to be able to hear your device ringer when someone's trying to reach you! Let's see how we can resolve your device issue prior to hard resetting the device.
Can you confirm which device you have, Samsung Galaxy S 4 or the Samsung Galaxy S 4 mini? Are you able to hear audio or sound when you play videos, downloaded songs or web based audio on your device? Have you tried soft resetting the device by following these steps: http://vz.to/1v1lTQE? Please keep me posted so that I can further assist. Thanks!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport

Ringtones don't work

Neither Apple nor custom, never worked since I got my iphone tow weeks ago.
Tried reset, reset and erase all settings still don't work.
I have read different threads but nothing I tried solves the problem.
I guess I need to take it in
Thanks,
Alex N.

Ok, yes then does sound like an issue. Just wanted to clarify all steps were taken.
You can call to make an appt but will tell you, they will ask you to try a restore first. I see you did resets but never mentioned Restore. If you rather not try a restore, at least make sure you sync before taking it in. If you get a new one or if they restore yours at the store, you will be coming home with a default phone. Will have to set settings for syncing to bring back all your contacts, music/video, apps. It would be best NOT to restore from backup as something in the backup may be a corrupted file from the iPhone that caused the issue in the first place. Best to either restore and not choose from backup, or let them restore and give you default phone. Just my opinion.

Ringtone don't work with 4s

When. Changed to the 4S my ringtone doesn't work. It is one I downloaded on my 4. It works if I assign it to each caller but not otherwise? Any
suggestions?

Hey Vladimir86,
This may be a question that MOTU could answer. It says on their website their devices are compatible with GarageBand. Here is link to their support page:
http://www.motu.com/techsupport
Here is also a link to the mac setup guide:
http://cdn-data.motu.com/manuals/firewire-usb-audio/Audio_Express_User_Guide_Mac .pdf
Hope this helps

Using VPN to access remote servers; copying files to desktop since "upgrading" to Mavericks no longer works. Can anyone help please?

Hi everyone,
I work remotely using Cisco AnyConnect (company provided) to access the company servers. Until "upgrading" to Mavericks I was able to copy files directly to my desktop – from either the servers themselves, from within Bridge, and/or by using the finder - you get the idea. Now I can only copy the files by opening them while still on the server using the native app (in my case mainly InDesign/Photoshop/Illustrator files) and saving them to my desktop that way.
I'm a designer, I use a lot of files for my specific job every day and these files are often pretty large and doing it this way is time-consuming and really frustrating seeing as I had no such issues with the previous OS. It's not a total nightmare (yet) like some of things some of you are dealing with but I've spent more time restarting, freezing and trying to fix issues than I have actually using my darned machine. I have no choice but to access my work this way; I'm part of a much larger team and we all work on these files off and on during the day so I'm constantly needing to copy files and make sure I'm working on the most current version. Working off the server isn't an option as the speed decreases considerably... making the slightest task cringingly slow. As in 25 minutes for a PDF to be created slow.
I've been used to my system running smoothly, without issues and fast so this upgrade is turning into a bit of a nightmare. Before I throw in the towel and try and downgrade, does anyone have any ideas? My technical knowledge where these things are concerned isn't beginner but I'm no expert and I'm stumped. I just don't know where to start and I'm afraid of screwing something else up during the process of trying to fix this (so far) one issue and creating a snowball effect.
I'm using a 27" iMac (late model 2012 purchased in March 2013) with a second Viewsonic monitor attached. I have a Cintiq 22HD hooked up (but not on all the time) and a Wacom tablet in use. I currently use both CS5 (work hasn't upgraded to CC yet) and Adobe CC (for personal use) on my system.
Any help/ideas would be greatly appreciated!
Thanks!
G.

Hi,
By default, the Remote Desktop (RD) Gateway component that encapsulates RDP in HTTPS packets listens on port 443 (for TCP) and port 3391 (for UDP). After you changed the ports in Transport Settings tab, please make sure that you have opened the custom ports
you selected in Windows Firewall.
In addition, since you have mentioned the registry key, would you please share the entire path?
It seems that you need to manually update the gateway in the RDP file with the port. Have you created an .rdp file? You can also refer to the link below:
Create an .rdp file
Best regards,
Susie

AE upgrade now presets don't work?

Hi adobe community,
Just recently upgrade my AE via the desktop ap (I have full CC) and now my animation presets won't work? I get an error box
( 0 :: 1 )
After Effects error: Can't import file "Fade Up Characters.ffx": unsupported filetype or extension
AE 14.1.1
I am trying to get the presets out of Bridge - do I need to also upgrade bridge? I can't see an upgrade for it on my desktop ap.
Any help would be great thanks
Pat

Phil, a specific bug was fixed in After Effects CC 2014.2 (13.2) that prevented application of animation presets from Bridge on any OS. I can confirm that this bug was fixed on both Mac OS and Windows.
You're likely seeing a different cause of the same problem. Two questions:
1. What version of Bridge is installed on your computer?
2. In Bridge, go to Preferences > Startup Scripts. In this dialog is After Effects CC 2014 listed, and is it enabled? If it is not present or enabled, that would explain the problem. A reinstall of Bridge and then After Effects will usually restore the proper scripts, though if you've already done so then I suspect that something may be failing with your install configuration. If you are using custom permissions on your student machines, that could be interfering with the script either being installed or initialized as expected. You'll probably want to contact technical support for help with that.
One further note: although browsing animation presets in Bridge provides a larger interface, it's not the recommended method. The Effects & Presets panel inside of After Effects is the recommended path for browsing and applying presets. Bridge does provide animated previews for the presets included with After Effects, not user-created presets; therefore it is of limited utility. The Effects & Presets panel is faster to use and easier to search.

Leopard Upgrade Issue (Fixes Don't Work)

Hello all,
I have a 1Ghz Powerbook G4, and have never had OS upgrade problems before. I finally decided to upgrade to Leopard and am sharing in the Blue Screen o' Death fun that so many have experienced.
I have read through the many posts on this. I have done the APE removal stuff, repaired permissions and hard drive, and rebooted while standing on my head -- but I always come back to the BSoD.
There isn't enough room on my HD to do an Archive & Install, because I was going to dump a bunch of old files on DVD-R after I upgraded. I DID do a complete clone of my HD before I upgraded, so most everything is there but:
1) I did some logo/vector work this morning and was stupid to not at least ZIP it all up and email it to myself. I would really like to get this folder back out of my documents if at all possible.
2) Although I have a clone I have never had problems, so I have no idea how to use it. Do I restart holding down C, and use the DVD menu to restore the hard drive?
- If I do that will it be just like it was when I last backed it up?
- If I go this route, can someone tell me if I can possibly get that folder out of my documents first?
- Is there a better way for me to approach this?
Thank you all in advance for your help!
Jason

Is there a better way? Yes, but unfortunately you didn't do it the first time around which is why you are now having problems. So here's what you need to do:
1. Boot from your Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from theUtilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives.
4. Select the startup volume (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will may take several hours depending upon the drive size.
7. After the formatting has completed quit DU and return to the installer. Finish the OS X installation.
8. After the computer restarts you will be in the Setup Assistant. Be sure to create the new admin account using the save shortname and password as you are using now. The shortname is the name that appears under your Home folder.
9. You can then use Software Update to update the system software. After you complete the updating process I suggest opening Disk Utility and repairing permissions.
Once you have Leopard running you can begin the process of reinstalling your third-party applications and copying your personal files from your backup clone.
I strongly recommend that before reinstalling any third-party software that you obtain versions that are compatible with Leopard. I also suggest that you repair permissions after installing any third-party software that uses an installer (as opposed to drag and drop installing.)
From time to time perform some maintenance to keep the computer running properly:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.0 is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.6.1 is Leopard compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. The current version, 1.5.1, is Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that presently AppleJack is not compatible with Leopard.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
8. Data Backup (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com.

CAN ANYBODY HELP WITH BOOTCAMP ON MAVERICKS? SINCE UPGRADING TO MAVERICKS BOOTCAMP DOESNT WORK WITH MY WIN7 DISC THE PARTITION STOPS HALF WAY THROUGH THEN CRASHES MY MAC PRO

SINCE INSTALLING MAVERICKS I HAVE NOT BEEN ABLE TO INSTALL WINDOWS 7 ON MY START UP DISC.... WHEN I GO TO INSTALL AND PARTITION THE DISC IT LOADS TO ABOUT A QUARTER OF THE WAY THEN MY MAC PRO CRASHES

Hey, I had windows 7 installed on my mac pro which is a 2013 model with the partition set at 80 and it worked fine then when i upgraded to mavericks with the free download and tried to access bootcamp windows 7 was gone so when i tried to upload it again thats when the trouble began, i have tried about ten times and even made a copy of windows and tried that but when i do my partition it loads to about a quarter of the way and crashes my hole computer were i have to press and hold the power button

Assigned ringtones don't work when calls come from contacts?

I have set ringtones on some of my contacts and it shows when looking at them, but when a call comes in from one of them it rings on my phone with the main default ringtone.
I set these tones, then hit "save," and then hit "done."
What is missing?

All ringtones I created in GarageBand needed to be replaced w/ newly edited ones, created after all updates were installed. Now they work fine. Probably just a formatting issue. A pain, I know, but at least I have the answer.
This is not the first time an OS update broke my tones.
If you downloaded ringtones from iTunes, try deleting them, then re-downloading.

5530 - some incoming ringtones don't work but othe...

Hi, my wife's just bought a 5530 and is pretty impressed...
but...
Having set up incoming ringtones for the rest of the family, our home phone doesn't trigger the correct ringtone (and the incoming call message just has the number, not the name). Calls from my mobile work correctly. The only difference I can think of is that our home line is on a VirginMedia cable connection. Might that have something to do with it?
TIA
K
Solved!
Go to Solution.

have a look at this it may help, post by pat c
/discussions/board/message?board.id=topfaq&thread.id=28
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Personal Ringtones don't work

Me and my mom both recently purchased iPhones and they worked fine to begin with but when we put the latest software update on them we started having problems with our custom ringtones. These problems were that when sometimes when someone calls it displays there info and pic but it does not play the ringtone that is assigned to them and I have double checked and they are set to the ringtone so I was kind of just looking to see if any one else has been having this problem thanks.

There's been a number of users reporting this. There are some suggestions to try that have worked for some people:
This issue may be due to the way the number is stored on way on your iPhone but comes in using a different format. For instance, if you have the number stored in full international format, but it comes in as a local number, the correct ringtone may not play.
Some people have solved it by doing a reset: Settings > General > Reset > “Reset All Settings”. This will erase your voicemail password and other stored data.
Others have deleted the contact having the problem, recreating it, then reassigning the ringtone.

Since upgrade my ringtones don't work

Similar Messages

Maybe you are looking for