Since upgrade to MDT 2013, can't capture Windows 7 image.

Hi fellas,
I use Virtual Box to create a 32- and 64-bit reference Windows 7 VM, which I then capture using an MDT Sysprep & Capture TS. This worked without a hitch using MDT 2012.
I recently upgraded to MDT 2013. Since then, after the VM syspreps and reboots, I get a boot manager error saying Windows failed to start. Status: 0xc0000260.
Not sure where to look for any logs. What I've done so far:
- Upgraded to latest version of Virtual Box (4.3.18)
- Rebuilt both VMs from scratch.
- Deleted and recreated the deployment share and Sysprep & Capture task sequences.
Stumped for the time being, although I could always just boot to my Win PE disc and manually capture with imagex. But c'mon.

Thanks for your input, but this is indeed a configuration issue, and it makes sense.
Vbox VMs are configured according to the guest OS installed on them. For my Windows 7 x64 VM, it's configured of course to run as Windows 7 x64. In the MDT 2012 environment, the Windows PE version
was 3.0, which is based on Windows 7, and hence the VM could boot to it since it was configured for it.
But MDT 2013 uses PE 5.0, based on 8.1. The VM crashes or throws an error when trying to boot the PE 5.0 boot image. I went into the VM's settings and changed the Guest OS to 8.1 x64, and it booted successfully to Windows PE and captured the
image according to the Sysprep & Capture sequence.
Sorry for the wild goose chase fellas. This should've been the first thing I checked.

Similar Messages

Unable to capture images since upgrade to MDT 2013

I recently updated MDT 2012 to MDT 2013 to enable support for Windows 8.1. Under MDT 2012 I was able to both capture and deploy images without an issue. Since upgrading to MDT 2013 I've had nothing but grief. When I launch my Sysprep and Capture task I am
returned with the following error:
Error creating an image of drive D:, rc=2ZTI ERROR -Non-zero return code by ZTIBackup, rc=2Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Create WIM.
The system cannot find the file specified. (Error: 00000002; Source: Windows)
The execution of the group (Capture Image) has failed and the execution has been aborted.
An action failed.
Operation aborted (Error: 80004004; Source Windows)
Failed to run the last action Create WIM. Execution of task sequence failed.
The system cannot find the file specified. (Error 00000002; Source: Windows)
Task Sequence Engine Failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error TAsk Sequence Manager failed to execute task sequence. Code 0x80004005
Once the machine boots up again I check the BDD log located in C:\Windows\Temp\DeploymentLogs and notice the following error:
<![LOG[ Console > Error opening file [\\rmh-vm-mdt2012\DeploymentShare$\Captures\WINDOWS.8.1.REF.wim].]LOG]!><time="10:23:55.000+000" date="02-06-2014" component="ZTIBackup" context="" type="1"
thread="" file="ZTIBackup">
<![LOG[ Console > Access is denied. ]LOG]!><time="10:23:55.000+000" date="02-06-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
My issue appears to be a permissions problem. For troubleshooting purposes I've given Everyone full access to \DeploymentShare$ however the problem continues to persist.
I'm not sure where to go from here. Hoping someone can help.
Thanks.

Additionally, ensure that the share itself is marked R/W access.
As a test, boot to WinPE and try to create a file, any file on the share.
However, Lordy86 may have the correct solution :^).
Keith Garner - keithga.wordpress.com

Since upgrading to LabVIEW 2013, every VI compiles every time I open it (including quick-drop).

Hi all. Since upgrading to LabVIEW 2013, every VI compiles every time I open it (including quick-drop). This really slows things down! Perhaps related, my system tells me I don't have permission/access to modify my LabVIEW ini. Has anyone seen similar, and/or any hints towards a solution?

Jeff-P wrote:
As a side note, LabVIEW.ini is a file that gets generated by LabVIEW when it is launched if the file does not exist. So if you are missing the 32-bit ini file, launch 32-bit LabVIEW and that file should be created.
I thought that the message: "Perhaps related, my system tells me I don't have permission/access to modify my LabVIEW ini" might indicate that the labview.ini file cannot even be created... strange...
LabVIEW Champion . Do more with less code and in less time .

Since upgrade ios and iTunes can't access homeshare on ipad

Since upgrade ios and iTunes can't access homeshare on ipad. I see 'share', when using music app on iPad. I click on it and then select my MacBook Pro. Circle starts goes half way the stops. My Apple TV works great. So iTunes on MacBook must be set up right. Videos app is similar, the circle just spins and spins. My wifi is an apple airport. I beginning to think I have invested badly. I have signed out and in again of home share on iPad and MacBook as advised. I have read and re-read. Is there a solution?

Hello Gary,
Thank you for the details of the issue you are experiencing with Home Sharing. It sounds like you are not able to access iTunes from your iPad using Home Sharing. I found an article with steps that I think would help with this issue.
I recommend reviewing the full article below, but I think steps 4-7 are specifically useful for what you described:
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
Thank you for using Apple Support Communities.
Best,
Sheila M.

Since upgrading to Yosemite I can not run my airport express' without having to reset each of them every time I wish to use them. Does anyone know what the problem is?

I am running a 7 year old MacBook Pro 15. Since upgrading to Yosemite I can not run my airport express' without having to reset each of them every time I wish to use them. I did not have this problem with Mavericks OSX. Does anyone know what the problem is and is there a fix?

See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

Since upgrading to Yosemite I can't upgrade I Photo.

Since upgrading to Yosemite I can't upgrade IPhoto. It gives me this error "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."

Do SMC and PRAM reset and see what happens. Is your CD drive connected directly to the Mini? Perhaps it needs cleaning.

Since upgrading to Yosemite I can't open Illustrator CS6

Since upgrading to Yosemite I can't open Illustrator CS6 - it gives me an error message saying I need to install Java SE 6.
Of course I have no idea where or how to find the downgrade to legacy Java SE 6 and eveyrtime I put the error into your search bar I get a Dreamweaver How to install Java SE 6 note.... and If I could apply that advice to my illustrator error I would but I don't get an option to install ...
SIGH I need this to work now-this is my lively hood

Prompted to install Java SE 6 Runtime | Mac OS 10.9
Mylenium

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Since upgrading to IOS8 I can't send or receive emails. Can I uninstall?

Since upgrading to IOS8 I can't send or receive emails. Can I uninstall?

That's strange.
I bet you updated your iPad without using iTunes.
Anyway
No, you cannot uninstall iOS 8 and downgrade to iOS 7, but you can try reinstall iOS 8.
I would suggest you to do it from DFU mode.
Here are some things you need to know before proceeding:
You WILL NOT lose your photos, messages, notes, reminders or anything on your device.
If you choose to backup on iTunes, you will NOT lose your Apps. Anyway, if that happens someway, (it shouldn't happen, don't worry) you can download them later for FREE.
Here's how to proceed:
-First of all, as usual, do a complete backup of your device either on iCloud or your iTunes (i personally suggest iTunes. If iTunes asks to backup Apps, agree.)
-Put your device in DFU [While the iPad is connected to iTunes, press and hold both the home and the power button. When the Apple logo appears, release the power button and keep holding the home button until you see the iTunes logo on the iPad screen.]
-Once your device is in DFU mode, iTunes will automatically detect it as an iPad in recovery mode, so it will ask you to restore your iPad.
-Click on Restore and accept iOS 8 terms and conditions to continue the installation.
-Wait for iTunes to download and install the software.
-Once your iPad restarts, you will be guided to the configuration of your iPad. When it asks you if you want to configure it as a new iPad or restore from a backup, choose the iTunes or iCloud backup depending on where your backup is.
-Wait for iTunes to restore your device.
You're done!
Now test your device and let me know if everything works well!
Cheers, @tooFrozen

Since upgrading to iWeb08 I can't link to my photos from an external forum.

I have several webpages created on iWeb '06. I use these sites to post photos on the web. I used to link to individual photos on a page so that they would appear in a discussion forum by getting the image URL ending in .jpg, and posting it with BBS tags in the appropriate forum.
Since upgrading to '08 I can't do this. All the links I have created over the years have been broken and I can't create new ones from a photo page. Even if I find an image url with what appears to be a unique name - it has a number like #3.jpg at the end - when I paste it in the forum, the link defaults to the whole page/slideshow.
I can get a url of an individual image using the new Web Gallery, but I don't want to have to republish all my pages as galleries.
Anyone know what I'm doing wrong/differently?

I tried to connect a Samsung hard drive. Before Mavericks it was working fine. Now it won't appear in Finder and it can't be mounted in Disk Utility. As with previous issues I reported concerning iOS 7 and Mavericks, I wrote in this forum, but Apple never reacts. People are trying to help each other with workarounds, which is great, but the core issue isn't solved by Apple. It seems after Steve Jobs they're not concerned about quality that much anymore. The fact that I can't use a very common Samsung external hard drive on Mavericks is just way beyond deplorable. And what did I get in return? iBooks?

Since upgrading to iOS6 I can't browsing all application at app store only few I can browse which made me upset it narrow down my choices how can I over come this problem plz

Since upgrading to iOS6 I can't browsing all application at app store only few I can browse which made me upset it narrow down my choices how can I over come this problem plz

Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
Good luck.

Since upgrade, Facebook redirects into a new browser window

I noticed for the past couple of days that when I'd be in facebook and click on a game it would open a new tab. But since upgrading it opens a whole new browser window.
Tonight I was playing Monopoly and it kept saying that my internet connection was lost (which this may be a problem with the game itself) but I didn't know if it was because I had several browser windows open all for FACEBOOK!

Hello,
You can either use
<embed src="file.pdf" />
or, alternatively, my new plugin, PIFF: https://github.com/terrasoftlabs/piff
Peace,
Gabriel Nahmias
Terrasoft

Hello i would like to buy macbook air 11''' 2013 can i install windows 8 32bit?

Hello i would like to buy macbook air 11''' 2013 can i install windows 8 32bit with bootcamp,parallels or vmware?

This is an 'all in one' that should do the job.
http://www.amazon.com/Mini-DisplayPort-HDMI-Adapter-Cable/dp/B003OC6LWM
Ciao.

I have MacBook Pro 13-inch with retina early 2013 can I install windows on it because I tried but an error appear ( an error occurred while copying files)

I have MacBook Pro 13-inch with retina early 2013 can I install windows on it because I tried but an error appear ( an error occurred while copying files)

If you are on Yosemite, and have a CoreStorage volume (the default), it is not visible on the Windows side. The Apple HFS driver cannot read CS volumes.
You can verify this by running the following command in OSX Terminal.
diskutil cs list
If you get any output, such volumes will not be visible.
As a work around, if you really need it, check the 'Revertible' value. If it is yes, you can revert it to HFS+ by using the following command
diskutil cs revert
Here is the syntax for the command. The LVUUID parameter can be seen as a long string for your Logical Volume. Do not use the Logical Volume Group or any disk UUIDs. If you need the exact command, please post the output from the diskutil cs list command?
diskutil cs revert
Usage: diskutil coreStorage revert
MountPoint|DiskIdentifier|DeviceNode|lvUUID
[-stdinpassphrase | -passphrase [passphrase] | -recoverykeychain file]
Convert a CoreStorage logical volume back to its native type.
The file system must be mounted and resizable (i.e. Journaled HFS+).
Ownership of the affected disk and a passphrase (if encrypted) is required.

WDS 2012 Image Capture - Stuck at 50% "Capturing Windows image metadata..."

I have tried capturing a few images after running sysprep, and they are getting stuck at 50% completion, never moving past after hours of waiting. "Capturing Windows image metadata...". If I look on the WDS server I see that the file
hasn't been modified since it was actually capturing and moving the progress bar.
Has anyone ever experienced this, or have any ideas of how to troubleshoot?
Thank you!

Hi motenoob,
What system edition and MDT edition you are capturing? If it is Windows8 or 8.1, it seems is the know issue, you can refer the following KB:
Sysprep and Capture task sequence fails when it tries to capture Windows 8 or Windows 8.1 images
https://social.technet.microsoft.com/Forums/en-US/4e28cac0-29e4-4f24-a8f0-30d34d543a76/wds-2012-image-capture-stuck-at-50-capturing-windows-image-metadata?forum=winserversetup
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Since upgrade to MDT 2013, can't capture Windows 7 image.

Similar Messages

Maybe you are looking for