Since upgrading to 8.1 not connecting to WiFi and battery is going dead after 2-3 hours
Unfortunately, like most people I upgraded my iPhone 5 to the IOS 8.1. Now I cannot connect to WIFI and my battery is draining after 2 - 3 hours. I have deleted most of my apps but still no luck. What a disaster. Samsung is looking better and better, can anyone help before I take drastic measures and trade this phone in.
okay i managed to fix the issue with the graphics on archeage, everything no longer appears multiplied in different colors.
but i am still having the pixle issue.
But now i have also discovered a new problem and thought it wouldn't hurt to post it here also.
My mouse has become supper sensitive when playing my games, one little touch when trying to rotate the screen sends it into a frenzy and i end up looking at the sky or my characters feet. i didn't notice this before as i didn't even attempt to move with
the multiple color images everywhere. Also when holding down my screen rotation button it continues to rotate in that direction even though i am no longer moving the mouse that way.
I did notice that there was a patch for mouse issues so i tried to install it but it said i didn't have the requirements for it, so i assume it was included with the 8.1 update.
I have tried adjusting the settings in the games for mouse sensitivity, and it does not effect it, i even tried to adjust the computers but could not find the setting for what i was after. The mouse rotation button is holding the left or right mouse button
down and moving the cursor in the direction you want it to move. i couldn't see anything there that can help with that as the cursor speed is fine, its only happens when i try to rotate the screen.
Any help on this and my pixle issue would be greatly appreciated!
Similar Messages
-
since upgrading to LION unable to connect to wifi, in system preferences it says wifi off - cannot override it, what should i do?
While we all have MacBooks in this forum most of us don’t run Mountain Lion. There's a Mountain Lion Support Community where everybody has Mountain Lion. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_os/os_x_mountain_lion
-
if I'm overseas, and I use iMessage not connected to wifi, and I'm messaging someone who has an iPhone as well with ios 7, will get charged SMS/mms fees?
No, but cellular data will be used at whatever international roaming rate you carrier charges for data in whatever country.
Exchanging iMessages requires the same thing as email - an available internet connection. SMS/MMS is completely separate from iMessage. -
I phone 4 will not connect to wifi, and there is no password, i have tried and tried and nothing works, also the lock button doesnt work, i bought off from someone on facebook and now it will not connect to the wifi, PLEASE HELP
http://support.apple.com/kb/TS1398
-
My iphone 4s is not connecting to wifi and bluetooth is trying to connect since 2 days ago
not sure why my iphone 4s is not connecting to my wifi and it is dimmed out so I can't use it. Bluetooth has been trying to connect to something and won't allow me to go back. Any advice?
This most likely is a hardware failure that requires replacement, but try the suggestions in the following support article first:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
Beware of "fixes" involving freezers and hairdryers (cold and heat), which are at best temporary and likely to cause additional damage to the phone -
The phone is not stolen but it does not work out side of the house
if it doesnt match that means your iPhone is not provisioned for the carrier you are trying to use. Your iPhone would need to be unlocked in order to use on other carriers. You will need to contact your carrier to see if this iPhone is unlocked py providing them the IMEI. If the iPhone is not unlocked you will need to contact the carrier that the iPhone is locked to to see if they will unlock the device to use on another carrier.
-
i had to upgrade from ios7 to ios8 but it needed more storage i had so i backed up my phone to my computer then deleted the content on my phone and upgraded to ios8. i have not connect my phone and computer since. how do i get my content back?
Restore the backup from your computer
-
Since upgrading to Lion I cannot connect to my Buffalo Terastation
Since upgrading to Lion I cannot connect to my Buffalo Terastation and get the following message. "The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem". I have updated the firmware on the Terastation but still can’t connect to it. I have also posted this message on the Buffalo forum. Any suggestions?
Lion changed the rules for NAS communication. See this Web page. As that page dates from last July, I'd hope that NAS vendors would have fixed things by now. I'd ask Buffalo directly whether that product supports the protocol(s) described in that article.
-
phone will not switch to cellular data since upgrading to IOS 7. Have checked setting and everything is set to use data.
Hello berkshireds,
I would be concerned too if my iPhone only connecting to the Internet when connected to Wi-Fi. I recommend following the steps in the following article to assist with your cellular data connection:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Thank you for posting in the Apple Supprot Communities.
Best,
Sheila M. -
Since upgrading to mavericks anything i connect via usb disconnects
since upgrading to mavericks anything i connect via usb disconnects randomly. everything from ipods, phones and usb thumb drives is there a patch or fix out there. starting to become a pain. PLEASE HELP
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?
try to restore in itunes bye putting in recovey mode turn the ipod off press the home button and plug in the ipod into the computer. an itunes shuld see it in recovery mode and click restore. and that should do the trick.
-
Since updating my airport utility app to iOS 8, it can no longer see my base station and will not connect to wifi. My son's 4s with an older version of the app sees it and connects fine, so I know it's working. The internet works fine for everyone else in the house but my
Please take a look at this Apple support document to see if it help solve your issue:
iOS: Troubleshooting Wi-Fi networks and connections
If this does not help, we would recommend that you post in the iPhone community support area, since you have an iPhone / iOS issue. The link is just below.
Using iPhone -
Since i updated 6.1.3 phone is not connecting to wifi?? Help
since i updated 6.1.3 phone is not connecting to wifi?? Help
see also:
https://discussions.apple.com/thread/4909703?start=0&tstart=0
<Link Edited By Host> -
HT1689 Fater upgrading to IOS7, I can not connect to iTunes and App Store
After upgrading my iPad2 to iOS7 Ican not connect with iTunes and App Store
Problem foud: date and time settings (general settings) was set to "not automatically adjust". Changed it to automatically and the right date and time appeared. This solves the connection problems !
-
I cannot upgrade my IPad 2 with IOS.70, the download appeared to be complete but while it was verifing a "not connected to WIFI" message appeared yet IPad was connected and working. Not sure what is wrong, even tried to turn off Advast VPN thinking that was the issue but cannot complete upgrade.
try resetting your phone by turning it off and back on again. Also try resetting your network settings under Settings > General > Reset > Reset Network Settings.
Maybe you are looking for
-
Unable to burn AUDIO to DVD or Disk image, video is fine
As many other posts have stated; I am unable to burn the Audio portion of an iDVD nor does "save as disk image" transfer the audio of my iDVD. Transferred an iMovie, (an iPhoto set of photos with iTunes audio imported into iMovie) to iDVD. Audio play
-
Hi I have a problem with my PowerBook G4. I have it for 4 years now, but this problem came out a month ago. The power adapter usually lights green when the battery is full or orange when it's charging. And mine is flashing dark orange. And i cannot t
-
Is production version mandatory ???
Hi All, 1.Can some one please explain me what is the role of production version in PP (I know its a combination of BOM and work center)??? 2. I heard in "discrete industry its fine with out prod version, but on REM its mandatory" , can some one justi
-
Analysis Authorizations with two infoobjects in a infocube
Dear Experts, I have a infoprovider which is having two infoobjects Z1 and Z2 both are auth relavant i have two queries Q1 and Q2, Q1 has Z1 only and Q2 has Z2 only. if i have two sets of users, one group have access to only query Q1 and second group
-
Some songs are distorted after transferring to iPod....
I have a unique problem, some songs are distorted and occasionally sound like they are skipping when I transfer them to the iPod, yet if I play the files on my computer in iTunes, they play fine. Any suggestions as to what might cause this?