Since upgrading to iOS 8 , my Apple TV second gen stops playback every time my iPhone rings. Anyone else have this happen?
Since upgrading to iOS 8 , my Apple TV second gen stops playback every time my iPhone rings. Anyone else have this happen?
This is happening to me too. Couldn't figure out what was happening at first then I got a phone call and the ring came through the appletv. Playback was stopping when I would open a game or something else as well.
I'm on a 5s with ios 8 and have an appletv 3rd Gen(it is updated too). II often airplay movies from my NAS through my iPad min and that stops when something happens on my phone even though airplay on my phone is off.
Similar Messages
-
Since I installed the update for Mindjolt games, it will not let me in. Does anyone else have this problem?
Try resetting the iPad. Simultaneously hold down the Home and the On buttons until the iPad shuts off. Ignore the off slider if it should appear. This should take only about ten seconds or so. Once shut down is compete, turn the iPad back on.
-
After upgrading my software to 6.1.3 I feel my battery life has gone down, anyone else have this?
My battery life has considerably gone down after I updated. I will task kill all apps turn brightness down, location services off and wifi off and 6 hours later of not using my iPad it will be down 25% (to 75%). Is this normal? Has anyone else noticed this? Or is this possibly related to something besides the update.
Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
Use the wall-mount charger that came with the iPad and charge overnight. Admittedly the labeling is hard to read but, if you use a magnifier and squint your eyes, you'll see "Output 5.1V, 2.1A." The symbol between volts and amps is the symbol for DC. Do NOT use an iPhone charger. Do NOT use an iPod charger. Then, operate it normally until auto shut-down (ignore any low level alerts that may appear). An irony is that doing that test to determine the total operating time is also the exact procedure necessary to calibrate the battery level meter.
I'm not claiming that you do not have a problem. I am stating, however, that we don't yet know whether or not a battery problem exists.
According to Apple:
Use Your iPad Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge. -
When I upgraded to iTunes 10.5.2 I lost the ability to Drag&Drop. I started a new playlist and I could only add songs by cut and paste, and once they were on the list I can’t rearrange them in any other order.
I realized I can't drag and drop either, but I barely have any songs and I've never noticed if this feature was there before 10.5.2. Is this only on a playlist?
-
they "bought" 4 applications from app store - 3 in chinese letters so i don't know what they are, and one called ICEE maker.... anyone heard of these? they took about $75 off my account...
Email here > Apple - Support - Mac App Store - Contact Support
-
Since i upgraded to ios 6, I am having trouble stayong connected to wifi networks I connected to on my iPhone 4S .. anyone else have this issue ?
I sometimes experience the same issue. But not only in 6.1 but also in previous versions
-
I bought a Sandisk Connect Media Drive, downloaded the app from iTunes. Before iOS 8, movies played fine. After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive. Anyone else have a similar issue?
I checked with SanDisk's own online support and they indicate that they have notified Apple of the issue.
According to SanDisk, the problem lies with Apple not having the iOS 8 version of the Safari browser having DRM decoding enabled that the Media Drive relies upon to decode and play iTunes DRM titles. Non DRM encoded videos will play in the browser.
DRM audio is not effected as this is handled by the native iOS music app.
As of the date of this post SanDisk have not been given a timeframe by Apple for this issue to be resolved.
I hope that Apple resolves this issue quickly as I have a large collection of DRM video titles on a 128Mb memory card installed in the Media Drive that I am unable to view. -
i just upgraded my apple TV and now when I rent a movie on iTunes, instead of it playing instantly, it takes 60 hours to load. Anyone else have this problem?
Apple Support, I have just purchased 3 movies 2 from my account and 1 from my wifes account and both systems are stating that it will take 2 days to download. I have a FIOS 150 megabit per second up and 150 megabit per second down busiuness class fiber service to my location. I have tested downloading 10Gbyte files from two other locations and both work fine. I additionally went out and have tested doing speed tests (http://www.speedtest.net/) from over 10 other locations all over the US and all are over 75 magabits per second download speeds with a few hitting 100 and 125 megabit per second speeds. What is wrong with your servers or your internet connection????
This is VERY FUSTRATING!!!
I have additionally tried to download them with my Apple TV and two different PCs all wired on Gigabit Ethernet with jumbo frames enabled. I have tried differnet DNS servers also. I can upload and download files to my office 50G in less than 1 hour. I have also download movies from 2 other movie sites without any problems. -
Using iPhone 4s and upgrading to iOS 6.1...my phone is losing battery life. Is there a fix? Does anyone else have this problem???
NOLAgal71 wrote:
...my phone is losing battery life. Is there a fix?
Set Up as New Device
http://support.apple.com/kb/HT4137 -
Since upgrading to ios7 my message screen is blank.I am neither able to seee,send or recieve messages. I upgraded my iPad at the same time but messaging works fine. Anyone else have this problem? Any suggestions?
I have been researching the exchange message loss problem on other forums, but not seen a link to browser as yet. The message loss problem we have here is in a 32bit PB.
-
I just finished my multi-device upgrade to iOS X. Now, Keynote freezes and is basically dysfunctional. Anyone else have this problem?
What did you upgrade? There is no such thing as iOS X, there is iOS and OS X. iOS is for iphones, ipads, and ipods and OS X is the Mac operating system.
-
Apple tv3 runs slowly on all apps in the box,after the last update.Picture sometimes run's slowly on netflix ,and all the apps in the apple tv3 box.But the sound is ok.Anyone else have this problem?I have a 20Mbit wireless line,but i had put a cable from my router to my apple box,but it did not help.
Are you using a home network?
Try the following :
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings -
my airplay from my MacBook Pro to my tv through my apple tv is fuzzy- it just started being fuzzy about 2 months ago- it used to be clear- anyone else have this problem? How can I fix it?
Hi freezebri,
The following steps may resolve your issue:
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Selectbutton will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.
Hope this information helps ...
- Judy -
After updating to IOS8, my iPad 2, which has both AT&T cellular and wifi, needs to be completely turned off and rebooted to get cellular service. Does anyone else have this issue ?
Hi Hi Steve Giusto,
If you are having issues with Xxx_state issue here_xxX, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
HT5137
Next, I would try restarting the iPhone -
HT1430
If the issue is still present, you may want to restore the iPhone as a new device -
HT4137
Thanks for using Apple Support Communities.
Best,
Brett L ,
If you are having issues with your iPad not staying connected to cellular service, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
Next, I would try restarting the iPad -
Turn your iOS device off and on (restart) and reset
If the issue is still present, you may want to restore the iPad as a new device -
iOS: How to back up your data and set up your device as a new device
Thanks for using Apple Support Communities.
Best,
Brett L -
I did the recent update on my ipad 7.0.4 and now it keeps freezing up and can not use it. Tried reboot and works for a second then freezes right up again. Anyone else have this issue or know a fix?
Madmonkey,
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Gaylefromnewhope,
Seems like you tried this all ready and it didn't help.
Next might be to reset all settings.
Settings > General > Reset > Reset all Settings
Note that when you do this you will not lose data but you will have to enter all passwords again.
If that doesn't help you might tries a restore of your iPad using iTunes on the computer you normall sync with. Do a backup and save all data first. Or
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.
Maybe you are looking for
-
Error when trying to create component configuration
Hi! When I try to create a component configuration, the following error occurs after pressing the <create>-button: Dynproausgabe ohne Verbindung zum Benutzer (<b>Dynpro output without user-connection </b>) Applikationsserver PSD1P02_TS3_01 und im Wor
-
The CO account assignment object belongs to company code 2100, not 1100
Hi All, My system has all different company codes assigned to one cotrolling area as a result one can change org unit and position cost center from one company code to another. I recently changed same position's cost center from co code 2000 to cost
-
Error in Connecting the Oracle Attunity Source in SSIS package
Hi , May this question might have been posted before but as far as i am concerned i was not able to find the solution i am looking after , so please help me out on this . I am using the Oracle Attunity Software to connect to the Oracle source an
-
Implement Transactions best way, in my application
Hi all, I 'm currently developing an application, 3 - tire one, where its business services are exposed as web services, and those web services directly invokes DAO operations for data base operations. I have a question, what is the best way to imple
-
Hello everybody... I'm planing a school project regarding Peer-to-Peer networking using Java RMI technology. The general idea is to use a Java Applets (using a special security manager) which acts as a P2P client and uses RMI to communicate with othe