Since upgrading to Lion dragging objects is not accurate

Since i have upgraded to Lion i noticed a very annoying behavior, where dragging objects in Omnigraffle (latest versino) and Photoshop (latest version) often times skip a few pixel as soon as i release the mouse. Same effect with build-in trackpad, external trackpad and standart usb mouse.
I've turned of any sort of guides or snap to grid behavior without luck - especially since this was not neccesary in Snow Leopard.
To reproduce:
- Create an object, for example a rectangle
- Start moving it with your mouse/trackpad
- Release the button
- Object jumps 2ish pixels up or left
MacBookPro 15" as well as MacBook Air 13" (both end of 2010 versions)
Does anyone else experience this? Any solutions?
Thanks
Chris

What about other programs? Have you updated the printer driver?

Similar Messages

Getting following Pop up error, since upgrading to Lion on iMac (but not on my iBook).

Since upgrading to Lion on my iMac, I keep getting the following Pop up image error message. Translated in English it reads: The connexion to the server has failed. URL type files are not recognised.
Curiously enough, I upgraded my iBook with Lion also ... and I don't get this problem at all ! It does not cause any trouble, everything is working, BUT it is a Royal pain, as I have to click on OK twice to shut it down and it comes back up again every 10-15 minutes !! Can someone help ? Thank you.
Flo

This one: http://www.clubdirectlaine.ca/

Since upgrading to Lion, movies won't play in PPT for Mac 2011. ideas?

Since upgrading to Lion, my movies will not play within PPT for Mac 2011. Do I have to install new CODECs? how?

Asatoran, Good ideal. I went there with the question and got this response:
"The windows version was probably built with active-x controls which do not work on the Mac. you will need to change the controls to those on the forms tool bar."
I found a form tool bar in the developer section, but nothing on active controls....and the sheet is protected not allowing any changes anyway.
Thanks again for the direction.
John

Safari works great on my iMac, but not so well on my Macbook Pro since upgrading to Lion. I get a message that I am not connected to the internet when I try to open a webpage even though the wireless icon at the top of my screen shows I am connected.

Since upgrading to Lion I am having problems with Safari on my Macbook Pro. I am using wifi to access the internet and the internet works in all other application except for Safari. When I try to access a webpage most times I get a error message saying I am not connected to the internet. If I click on diagnose the problem, I get connect again to the internet through the diagnostic process and the webpage generally works. This is not a problem when wired to the internet.

Check your network settings, in particular the advanced setting "DNS Server". If it is by chance 127.0.0.1, make sure to change is and use a know DNS Server (from Google for example, or your own Router local address).

Ever since upgrading to Lion I keep getting the error message "disk was not ejected properly."

Ever since upgrading to Lion on my iMac G5 Intel Core 2 Duo, I keep getting the error message "disk was not ejected properly." I have repaired permissions and reformatted my external LaCie 2TB USB hard disk, but the error continues. I use this disk for my Time Machine backups. This always seems to happen when the computer wakes from sleep, but not consistently. The computer was asleep overnight and backed up as soon as it awakend this morning. Two hours later I get the improper ejection message. I have used the same external disk with Snow Leopard (all versions), but never had this error message or problem. This disk has been in use without any problems since February, 2011. Upgrading to Lion is when this problem began. This is the below message (but from online image from Snow Leopard, but Lion message is essentially the same).

I had a similar issue. Mine was with a Seagate GoFlex drive. The solution was to install GoFlex for Mac 1.1.2 which included a 64-bit driver to disable the drives built in sleep timer:
http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=goflex-mac-install-softw are&vgnextoid=77002aaf8cc5d210VgnVCM1000001a48090aRCRD
I document how I discovered this in my blog post:
http://www.innerexception.com/2011/10/tale-of-computing-misery-how-to-fix.html

Since upgrading to Lion OS, the wifi connectivity keeps blocking up intermittently and we need to manually keep switching on and off the wifi utility to get the connection back. even locking the preferred wifi network in system preferences does not help.

Since upgrading to Lion OS 10.7.1, the wifi connectivity keeps blocking up intermittently and we need to manually keep switching on and off the wifi utility to get the connection back. even locking the preferred wifi network in system preferences does not help. This never used to happen with Snow Leopard

This is a big thank you to Rys Sinnefeldt who posted this fix.
Rys has made this fix very easy to do and takes literally 2 mins. It involves replacing the Atheros Lion driver 4.0 and replacing it with the snow leopard driver. Don't worry, Rys has made this so simple to do even I could do it and so far I have had no more wifi drops.
follow this link
http://rys.pixeltards.com/2011/09/04/osx-lion-wifi.html
Thanks again to Rys.

Since upgrading to Lion, my PC recipients are not receiving photos I attach to the email sent from iphoto. Why?

Since I upgraded to Lion, my photos are not attached to emails. Example: I select photos in iphoto, click Share and send the email.
Recipients tell me that there is 'nothing attached, no photo attached." Can you help?

This doesn't work for me at all. I tried entering exactly the same information that I used to set up my regular email account and I'm still getting an error message. I even tried switching to using my gmail account and neither one worked. Then it got hung up and had to repair my database! I have a lot of photos on my Mac (thank goodness they're backed up) and I was really sweating it for a moment.
Apple is so easy until it's not. I find this to be really aggrevating and I'm irritated that it hasn't been fixed. In fact I did an online search and someone described this same problem in detail and it was exactly what was happening to me. Same error messages.
I'm frustrated that Apple keeps updating it's operating system and then we go through these glitches.
And while I'm at it, I have never had such a frustrating time using my login information as I have to get into this forum! Why do they make it so difficult? There's just something about the way it's worded that get's me messed up every time. Meanwhile, at least get iPhoto fixed!

Since upgrading to lion and updating HP software my printer (photosmart D5160) will not print to CD/DVD when I try it says my printer doesn't support CD printing. any help will be welcome

Since upgrading to lion and updating HP software my printer ( HP photosmart D5160 driver 3.3.0) will not print to CD/DVD,when I try it says "your printer does not support CD printing". any help will be welcome.

I see those are old posts above but I'm just now having the same problems. I have the original software CD that came with my Photosmart D5160 printer but I can't load it. I get the message "You can't open the application "HP Installer" because PowerPC applications are no longer supported". So I don't have that going for me, which is not nice! But I couldn't really care less about that if I can just find a CD labeler software that will print from my Mac to the D5160. I'd rather by new CD labeler software than a new printer. I've tried a few free CD labeler software downloads, including iWinSoft Label Maker, but nothing has worked so far. I think there's an answer somewhere; I'm able to print documents on regular paper using this printer, but I only bought it (many years ago) to print CD labels and some pictures. It's been used only sparingly and it's been in storage since I bought my Mac 3 years ago, mainly because a I got a free printer with my purchase. Any help is vertainly appreciated!!!

Since upgrading to Lion, iCal event invitations are not working well.

Since upgrading to Lion last week, I am having problems with sending iCal event invitations to large groups of people (say 10 people or more). Although my iMac, iPhone, and iPad iCals show that invitations have been sent, only a few of those invited have actually received event invite emails.
Has anyone else experienced this? If so, any insight into the problem or solution?
Thanks in advance.

Nathan Miah wrote:
Is there absolutely anything else I could do to sort this such as phone Apple Support
If you want.
or maybe install Snow Leopard using the disc it came on with my Mac and just set it up from a Time Machine Backup on my external hard drive (since it works under SL)?
Did you install Lion on an empty partition, or did you upgrade Snow Leopard? If you upgraded, I'd not recommend erasing it, since your backups are apparently gone. It's doubtful Snow Leopard will recognize them.
It's not just backups on the drive either, there are other important things on there, so why won't they show?
Mixing Time Machine backups and other data is not a good idea. See #3 in Time Machine - Frequently Asked Questions. It sounds like the whole disk is corrupted.
I just really don't understand how this happened. Could it not be an issue with WD because they haven't issued firmware to support Lion yet?
If this is a simple external HD, connected by USB or FireWire, no, unless you installed some of WD's software on it. That shouldn't prevent it from being seen at all, but anything's possible.

Since upgrading to Lion, my HP officejet pro 7550 orubts, but will not scan

since upgrading to Lion, my hp officejet 7550 will print fine but won't scan---any suggestions?? I downloaded the drisavers from Apploe,but that didn't solve the issue.

Hi @Southglen,
Welcome to the HP Forums!
I noticed that your HP Officejet Pro 8600 Plus printer will not recognize your wireless router password. I am sorry to hear this, but happy to help!
I would recommend to go through this guide, How to Find the WEP or WPA Key or Password for Your Wireless Network, just to double-check your wireless password, in case it might have changed.
I would also suggest a hard reset, by going to this post How to perform a Hard Reset, by @Rich1.
After those two steps, I would suggest a firmware update, Getting Printer Updates for HP Officejet Pro 8600 (N911), Officejet 6600 (H711) and Officejet 6700 P....
Let's start with these steps, and we will go from there!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Since upgrading to Lion, my MacBook Pro is super slow connecting to Wi-Fi. Not so with Daughter's Snow Leopard or Wife's Dell. Any ideas?

Since upgrading to Lion, my MacBook Pro is super slow connecting to Wi-Fi (seems to search forever). This is not the case with my Daughter's MacBook (still on Snow Leopard) or my Wife's Dell (Windows 7). Any ideas?

Hold Option when you click on the Airport in the top bar & post the stats.

Since upgrading from Lion to Mountain Lion, when I login 1 of 2 disk images I have set to open on login does not mount.

Since upgrading from Lion to Mountain Lion, when I login 1 of 2 disk images I have set to open on login does not mount. It worked under Lion. Stickies opens just fine. The disk images are sparse disk bundles. Are there any suggested remedies? I have already tried repairing permissions. One interesting thing is that previously in LIon, the disk images were just sparse images, not sparse bundles. I switched to bundles after reading that Time Machine backups of sparse bundles would not copy the entire image, only the changed parts. The sprase images are for sharing of photo and iTUnes libraries among multiple family member on the same computer.

If it is working as expected, what do you need with the old backup?
If you want to be able to go back to where you were prior to an upgrade, isolate that backup and don't use it again. As far as Time Machine can tell, the whole drive changed.
The link I posted contains probably everything that anybody knows about Time Machine and how to manipulate it to work as you would like as opposed to how it was designed to work. There are FAQs to continue a backup as opposed to starting fresh, but I wouldn't recommend it for the reasons above. Pondini probably doesn't, either.
If you are going to do a wholesale upgrade of the OS, I would create a bootable clone using something like Carbon Copy Cloner or Super Duper. A bootable clone on an external drive can have you back up and running instantly if the upgrade fails in any way. If the upgrade goes fine, store it away in case you find the current system isn't to your liking.

I used mactheripper to rip my DVDs so I could store them on my mac. However since upgrading to lion x os mactheripper doesn't work. Does anyone know of a free alternative that works on lion x os? Thanks

I used mactheripper to rid my DVDs so I could store them on my mac. Since upgrading to lion x os mactheripper doesn't work. Does anyone know of a free alternative that works with lion x os? Thanks

Try what Terence Devlin posted in this topic:
Terence Devlin
Apr 14, 2015 11:21 AM
Re: Is Iphoto gone ? i want it back!
in response to Johannes666
Recommended
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Can't always connect to remote speakers since upgrading to lion

In one fell swoop I did a lot of upgrading, and ever since I haven't been able to reliably connect to any remote speakers using iTunes on my iMac. From iTunes (or the Remote app on the phone or iPad) I can see remote speakers, but I cannot connect. From iTunes, I just get the stripy progress bar, and it won't ever go away unless I cancel out. From the remote app, it just becomes unrepsonsive.
Context:
I have a iMac with OSX Lion, that I upgraded from Snow Leopard a few weeks ago. At about the same time, I updated iTunes to 10.5 from the last 10.4 release to be able to get the IOS 5 update on my and my wife's phones.
I have an Airport Extreme connected to our broadband, with 3 airport expresses in various places in our house connected on a wireless network to stereos for remote speakers. The iMac is connected to the Airport Extreme via ethernet. After upgrading the OS and iTunes, I got a notice that there was a firmware update for my two most recent airports (the Extreme and one of the expresses). They are running version 7.6 of the firmware, the other two airports are running 6.3.
There has been no change to the physical environment -- no sources of interference or anything like that. I can play music from the Music app on my phone to any of the remote speakers, there is no problem there.
About half the time, if I restart everything (wireless base stations, and then the computer) I can get the remote speakers to work. However, the next time the computer wakes up from sleep mode, I have the same connection problem described above.
Has anyone else experiences these sorts of troubles? I have seen some similar problems with older versions of all these applications and OS's -- and the solution there was to turn off ipV6 -- however, it doesn't look like that's an option now. Is this an identified bug, and is there a fix on the way? Is there anything I can do in the meantime?

Well, after some experimentation and internet-lookin', I deduced that is possibly a wi-fi problem. It seems that many people are having wi-fi problems since upgrading to Lion, and although I'm not connecting directly to my wireless network, it does form a pretty big chunk of my setup describe above.
So I tried the fix outlined on OSX Daily here: http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/
Essentially what it has you do is to create a new network location, name it, and then renew your DHCP lease. This seems to have worked for the time being.

Since upgrading to Lion my address book no longer communicates with iTunes? This means that no new information is getting to my iPhone etc? Any ideas? Thanks

Since upgrading to Lion my address book no longer communicates with iTunes? This means that no new information is getting to my iPhone etc? Any ideas? Thanks

Nathan Miah wrote:
Is there absolutely anything else I could do to sort this such as phone Apple Support
If you want.
or maybe install Snow Leopard using the disc it came on with my Mac and just set it up from a Time Machine Backup on my external hard drive (since it works under SL)?
Did you install Lion on an empty partition, or did you upgrade Snow Leopard? If you upgraded, I'd not recommend erasing it, since your backups are apparently gone. It's doubtful Snow Leopard will recognize them.
It's not just backups on the drive either, there are other important things on there, so why won't they show?
Mixing Time Machine backups and other data is not a good idea. See #3 in Time Machine - Frequently Asked Questions. It sounds like the whole disk is corrupted.
I just really don't understand how this happened. Could it not be an issue with WD because they haven't issued firmware to support Lion yet?
If this is a simple external HD, connected by USB or FireWire, no, unless you installed some of WD's software on it. That shouldn't prevent it from being seen at all, but anything's possible.

Since upgrading to Lion dragging objects is not accurate

Similar Messages

Maybe you are looking for