Since "upgrading" (?) to Lion, my Hewlett Packard scanner has ceased to function. "Power PC products are no longer supported." Is there any way to get my scanjet3570c to work again as it did so well before?

Since upgrading (?) to Lion my HP 3570c scanner won't operate because "power PC products are no longer supported"
Is there any way I can get a perfectly serviceable scanner (HP3570c) to work with my iMac?

Is it just the HP software that's not compatible, rather than the scanner itself?
A couple of things you could try that may work. Launch Image Capture in the Applications folder and see if that recognises your scanner. If that draws a blank, you could try downloading VueScan from www.hamrick.com and see if that works. If does, you'll need to buy a licence to make it fully functional.

Similar Messages

  • I upgraded to lion when it first came out but today i tried to open my photoshop cs2 and its telling me the powerpc applications are no longer supported is there any fix out there for this

    i upgraded to lion when it first came out but today i tried to open my photoshop cs2 and its telling me the powerpc applications are no longer supported is there any fix out there for this

    Lion is Not compatible with PPC (Power PC) based software, such as your older version of PhotoShop.  Your choices are you can either upgrade to the newer version of PhotoShop, or you can backup your data and apps, erase your harddrive and reinstall Snow Leopard.
    Hope this helps

  • Is there any way to get pictures back if you forgot to back up your iPhone before restring it?

    My husband started a iCloud backup but I guess it did not go through because when he reset it the restore for today was not on there. Is there anyway to get the content back?

    No not if you do not have a copy on your computer

  • I upgraded my Mac from OSX 10.5.8 to Snow Leopard and then to Mountain Lion 10.8.2.  I did have Microsoft Office for Mac 2004 in my applications and now get a message "can't open Office because Power PC applications are no longer supported."

    I just upgraded my MAC from OSX 10.5.8 to Snow Leopard and then to Mountain Lion 10.8.2.  When I try to access my Microsoft Office for MAC (2004 edition) files I am getting a message "can't open Office because Power PC applications are no longer supported.  How can I access all of my save Word documents?  I just want to be able to retrieve all of my documents that were in Microsoft Office for Mac (2004).  If I purchase the newest version of MS office for Mac from Apple will I be able to retrieve my old documents?

    Use any number of free alternatives to your nearly decade old version of MS Office.
    Consider
    LibreOffice (donation-supported)
    NeoOffice (free)
    OpenOffice (free)
    In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for years. Life is better without Microsoft.

  • I upgraded to 10.8.4 and now it won't let me use my Epson scanner, saying "power pc applications are no longer supported." How do I make it work?

    I upgraded to 10.8.4 and now I can' use my Epson scanner  I get a message saying, "ou can't open the application Epson Scan apps because Power PC applications are no longer supported." I also can't synch my old Palm Pilot for the same reason.
    How can I fix this?

    We need to sort out some facts here first:
    •  You cannot be running Mt. Lion on your iMac G5.  What Mac is it?  What is the Model Identifier listed in About This Mac; More Info; Hardware Overview
    •  What is the model of your Epson Scanner?
    •  Have you attempted to scan using Image Capture, located in your Applications folder?
    •  Your Palm Pilot software will only run in Snow Leopard; so depending upon which Mac you have, you will either have to:
    1)  partition your hard drive or add an external hard drive and install Snow Leopard into it to "dual-boot" when you want to access you Palm software, or
    2)  install Snow Leopard Server (now available from Apple for $20 telephone orders USA & Canda only) into Parallels 8 to run your Palm software in Mt. Lion:
                                  [click on image to enlarge]

  • Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?

    Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?
    Just want to avoild spending hours migrating everything across....

    Yes, I can read but just can't write DVD's. I get:
    This disc can’t be verified and might be unreliable. Try again using a new blank disc (error code 0x80020063).
    Originally I thought it was the old Moutain Lion DVD drive issue (but have had the drive recently replaced by Apple), so I tried creating a new account, which worked.
    In the old account I have reset SMU, Pram... but no change.

  • Today, I just updated my iphone software to IOS5.  I forgot to download pics from my iphone and since the upgrade they are all gone.  Is there a way to get them back?

    Today I just update my iphone software to IOS5.  I forgot to download pictures that were on my iphone and since the upgrade they are all gone.  Is there a way to get them back?

    The only restore I can find is from 2010.

  • I used to be able to select an arbitrary "column" in MS Word, but since upgrading to OS 10.9.4 and MS Word for Mac 2001 v. 14.4.3, it doesn't work anymore.  Is there any way to get this handy functionality back?

    I used to be able to select an arbitrary "column" in MS Word, but since upgrading to OS 10.9.4 and MS Word for Mac 2001 v. 14.4.3, it doesn't work anymore.  Is there any way to get this handy functionality back?

    http://www.microsoft.com/mac/support
    http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

  • HT4236 I was trying to Import photos to my computer and was asked to upgrade my Iphone before importing. In restoring my Iphone, it deleted all of my 200 new photos and they are now gone. Is there any way to retrieve them?

    I was trying to Import photos to my computer and was asked to upgrade my Iphone before importing. In restoring my Iphone, it deleted all of my 200 new photos and they are now gone. Is there any way to retrieve them?

    You should ALWAYS import all pics ( and anything selse for that matter) before any update. 
    If you failed to do this, then the pics are likely gone.  You can try restoring from backup.

  • I upgraded to Ios5 and have lost my contacts and other app profiles - is there any way to get them back from the backup taken before the IOS5 process started?

    I upgraded to IOS5 and have lost my contacts and other app profiles - is there any way to get them back from the backup taken before the IOS5 process started?

    Thanks but have tried that - When I try to restore I get a -50 error and into a loop of taking another back up.  I took a copy of the back up before the IOS upgrade and have it stored on my desk top but I cannot get Itunes to restore to that back up
    Any ideas how I can do this?

  • I have lost my Macbook Air. Is there any way to track it using its serial number. I did not register it to find my iPhone before.

    I have lost my Macbook Air. Is there any way to track it using its serial number. I did not register it to find my iPhone before.

    If you had no installed http://www.apple.com/icloud/find-my-iphone.html  t
    then no,
    Change any vulnerable credit or bank info that might be got off your macbook.  Have you contacted the authorities about its theft?
    sorry for your loss

  • Have an Epson workforce 600 worked fine until new router and Lion installed.  Now when I try and scan with the all in one I get a "POWER PC APPLICATIONS ARE NO LONGER SUPPORTED"  and my IMAC does not recognize that the Epson is a multi function printer.

    Installed a new router.  Installed Lion. Have an Epson Workforce 600 multi function printer.  Two problems. 
    1. I cannot get Lion to recognize that the Epson is a multi function printer.  There is no scan option on the "print/Scan" popup window.
    2. When I try and use the epson scan utility I get:  POWER PC APPLICATIONS ARE NOT LONGER SUPPORTED.
    I have tried EPSON support with no real luck as they say it is Apple upgrades that are the problem.
    Apple support was quite rude..said it was not their problem and that I should call epson.  Told the I did but it made no difference just got the same reply.
    Have no idea what to do.....seems I cannot find out which multi-function printers Lion supports. 

    daolbuzzard1 wrote:
    Epson Workforce 600 multi function printer
    Not to give you another run around, but you need new printer drivers from Epson for your printer so it works in Lion.
    Now it could be that they are working on it, or that they could have decided not to provide new drivers in order for you to force upgrade.
    The only thing a user can do is decide very carefully BEFORE upgrading to a newer Apple operating system, make sure that all their current hardware and software works and make a decision for themselves.
    Since you upgraded to Lion, you can go back to Snow Leopard and your PPC software will work.
    Do you need instructions?

  • I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM... I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM? Is there any way to get more VRAM to play games on steam?

    I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM...
    I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM?
    Is there any way to get more VRAM to play games on steam?
    I've learned  by reading other topics that I can't upgrade my graphics card on my Macbook Pro because it's soldered into the motherboard or somthing like that, but please tell me if there is any way to get more video ram by chaning some setting or upgrading something else. I'd also like to know why I only have 256MB of VRAM when I have 8GB of RAM, since I have 8GB of RAM I thought I was supposed to have 560mb of VRAM...
    So the two questions are...
    Is there any way to upgrade my VRAM, so that I can play games on steam?
    Why do I only have 256MB VRAM when I have 8GB total RAM?
    Other Info:
    I have a quad core i7 Processor.
    My graphcics card is the AMD Radeon HD 6490M.
    I am also trying to play games on my BOOTCAMPed side of my mac, or my Windows 7 Professional side.
    THANK YOU SO MUCH IF YOU CAN REPLY,
    Dylan

    The only two items that a user can change on a MBP are the RAM and HDD (Retinas not included).  You have what the unit came with and the only way you will be able to change that is to purchase a MBP with superior graphics
    If you are very much into gaming, the I suggest A PC.  They are far superior for that type of application to a MBP.
    Ciao.

  • I am trying to install Final cut pro studio V1.0.1 (2005) on OS X lion. I get a message "You can't open the application final cut studio.mpkg because power pc application are no longer supported

    I am trying to install Final cut pro 5 studio V1.0.1 (2005) on OS X lion. I get a message "You can't open the application final cut studio.mpkg because power pc application are no longer supported. My computer is New. Is their a link I can go to get tech support?

    You won't find any help at tech support ... other than telling you the facts: Intel processor Macs require FCP 5.1 or higher.  FCP 5.0 and earlier were written for PowerPC processor Macs, long before Apple switched to using Intel processors.
    And then there's the issue of the OS.  OS 7 will allow FCP 7 (and sometimes even FCP 6) to work OK, but versions earlier than that have spotty operation on Lion.
    Here's a brief history of full FCP versions and recommended OS compatibility:
    * = requires PPC             ** = works with both PPC and Intel                          *** = require Intel
    FCP 1.0*       OS 9
    FCP 2.0*       OS 9
    FCP 3.0*       OS 9, OS 10.1, OS 10.2
    FCP 4.0*       OS 10.2, 10.3
    FCP 4.5*       OS 10.3
    FCP 5.0*       OS 10.3 (OS 10.4?)
    FCP 5.1**     OS 10.4, 10.5
    FCP 6.0**     OS 10.4, 10.5, 10.6 (OS 10.7?)
    FCP 7.0***    OS 10.6, OS 10.7
    FCP-X***       OS 10.6, OS 10.7
    Essentially, you have a newer Intel processor Mac with a new OS and very old, incompatible software.   You might be able to find a used version of Final Cut Studio 3 on sites like ebay or craigslist as it is no longer offered by Apple as an upgrade.
    Alternatively, you could purchase and download FCP-X, but it is an entirely different application, sharing virtually nothing with previous versions of FCP.
    -DH

  • All my mails are wiped out 3 dats before .is ther any way to get it back

    Is there any way to get all mails back

    IMAP or Pop?
    Can you see emails via webmail - are they on the server?
    When you say all emails have gone, what do you see in the left Folder Pane?
    * Is the Folder Pane completely empty? nothing shows not even mail accounts?
    * Do you see mail accounts and folders, but all folders are empty?
    * Are you talking about just the Inbox or other folders as well?
    * What folders are missing emails?
    * Did you have all your emails in the Inbox folder or stored in various folders?
    * Did this occur after compacting the folder?

Maybe you are looking for