Since upgrading to Lion USB devices no longer connect to my virtual machine in parallels despite my parallels settings.

Since upgrading to Lion USB devices no longer connect to my virtual machine in parallels despite my parallels settings. As a result all usb devices show as networked drives from the mac. Therefore cannor access encrypted part of drive. Any ideas???

I actually have the same problem, since I upgraded to Mavericks my MacBook Pro can't seem to find the Bose sounddock 10. Has anyone found a solution to this.
It still works with the iPhone 5
Thank you

Similar Messages

Since upgrading to Mavericks, I can no longer connect to my Bose Sounddock 10 via Bluetooth. It was fine under Mountain Lion

Pairing my Bose Sounddock 10 to my Macbook Pro (early 2011) via Bluetooth was fine under Mountain Lion. After installing Mavericks, connection failed. I deleted the Sounddock & attempted to pair it again. I get an occasional 'flash' in the 'Devices' list, but no pairing occurs.
I have no issue pairing the Sounddock to my iPad running iOS 7.0.3.
Has Bluetooth been changed for Mavericks?
Is anyone else experiencing similar issues?

I actually have the same problem, since I upgraded to Mavericks my MacBook Pro can't seem to find the Bose sounddock 10. Has anyone found a solution to this.
It still works with the iPhone 5
Thank you

Since upgrading to Lion I can no longer mount my external hard drive

I backed up about 10 minutes before installing Lion when I was on Snow Leopard. I know my drive works fine and there are no issues with it.
However, when Lion was installed, I wanted to perform a Time Machine Backup, but it said my backup disk was unavailable. I checked in the Finder and it wasn't showing up in the side bar, even though it was connected to my Mac and the indicator light on the hard drive itself was flashing - suggesting drive activity. I can also hear the drive spinning.
I opened Disk Utility and the external hard drive appears in the side bar and it says 'WD My Passport 071A Media'. Underneath that is the 'Time Machine Backups' drive which is greyed out. I have tried right clicking on it and choosing Mount but it won't mount, and I have also tried Repair Disk which doesn't finish, but also doesn't report any errors either. If I run Verify Disk and Repair Disk on the 'WD My Passport 071A Media' drive (which is the same drive) it does not report any problems and says the drive is working fine.
I have tried updating the drive's firmware and using different ports but neither have worked. I have also tried rebooting my Mac.
I really need to use this drive to backup and I can't format it because I can't afford to lose any data on there. Could someone please give me some advice or tell me how to fix this? I would appreciate it so much.
Thanks,
Nathan

Nathan Miah wrote:
Is there absolutely anything else I could do to sort this such as phone Apple Support
If you want.
or maybe install Snow Leopard using the disc it came on with my Mac and just set it up from a Time Machine Backup on my external hard drive (since it works under SL)?
Did you install Lion on an empty partition, or did you upgrade Snow Leopard? If you upgraded, I'd not recommend erasing it, since your backups are apparently gone. It's doubtful Snow Leopard will recognize them.
It's not just backups on the drive either, there are other important things on there, so why won't they show?
Mixing Time Machine backups and other data is not a good idea. See #3 in Time Machine - Frequently Asked Questions. It sounds like the whole disk is corrupted.
I just really don't understand how this happened. Could it not be an issue with WD because they haven't issued firmware to support Lion yet?
If this is a simple external HD, connected by USB or FireWire, no, unless you installed some of WD's software on it. That shouldn't prevent it from being seen at all, but anything's possible.

Since upgrading to Lion, I can no longer talk to my windows network

I have upgraded to LIon and had not encountered any problems until yesterday when my remote printer on a windows pc refused to print. Whilst the mac book sees the network, workgroup and pc (NetBios name) it will not connect to it.
Has anybody seen this before?

chief8451 wrote:
Has anybody seen this before?
yes.
my Lion machines, too, won't connect to my winsloth computer. luckily, i still have a MBP running Snow Leopard ...

Since upgrading to Lion, I can no longer view my previews in Aperture.

Since I updated to Lion, Aperture has been sluggish and annoying and keeps quitting on me...
However, the worst problem I have is that I cannot view the previews of most of my photos.
The files are all referenced and kept on an external hard drive.
I have checked to see if the preview files are in the Aperture library folder in my Pictures file (I looked in Show Contents...) and they all seem to be there.
When I open the projects in Aperture, the outline of the photos appear, but I can't see the images.
Does anyone have any idea why this would be and how to fix it?
Thanks!

As a start you should update your profile it still says you are using 10.6.1 and including the Aperture version would be a good thing also. So have you upgraded to 3.2.1 yet? If not you should.
As a start you should look at Aperture 3: Troubleshooting Basics and see i that helps.
Post back
regards

Since upgrading to Lion i can no longer see other computers in my network and vice versa. What has gone on?

As the title suggests! I can no longer see any of the computers in my network, Mac or otherwise.
I have checked sharing permissions on all required computers and all seems to be good and have disabled firewalls.
I notice a few people have had similar problems with screen sharing but I am not even seeing another station to pottentialy share a screen with!
MBP 2.4GHz Intel Core 2 Duo
OS X - 10.7

Regarding the printer:
From: sterling r: https://discussions.apple.com/thread/5506493?tstart=0
If that does not help then from braden85:
This first article is about changing or updating printer software in Mountain Lion, and can be found here:
OS X Mountain Lion: Change or update printer software
http://support.apple.com/kb/PH10622
This next article tells you where to find the printer software for your specific printer brand:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/ht3669

Since upgrading to Lion I can no longer print to my network printer.

I get the error message "/usr/libexec/cups/filter/rastertospl" via http://localhost:631/printers/Samsung - it's a Samsung ML-1510 laser. Printing works fine from a Windows machine - the printer is attached to a network router, and I connect via WiFi from my MacBook Pro.
This worked perfectly before, now it doesn't, so what has changed in Lion?
Thanks very much in advance for any help and advice.

I've finally solved this problem. I used the printer driver for the Samsung ML-1510 from http://guigo.us/mac/splix/ and, another bout of logouts/logins later printing suddenly magically worked. I don't know if it was this driver alone or the restarts that did it, but I'm not going to break it again to find out.
Many thanks to everyone who offered advice, it's much appreciated.
Cheers.

USB devices no longer connected

Since installing Snow Leopard I have had problems with my Epson R2880 printer. I downloaded a later driver and this worked for a few days but now it will no longer print from any application. My TomTom has also stopped working on USB.
The USB ports seem to be faulty, although the keyboard and mouse are OK, everything else fails to connect via USB. They all show up in System Profiler with correct devices attached but are not seen by the OS any more.
I have tried a reset of the PRAM and also disconnected everything and powered off for at least 2 hours.
Anyone familiar with this problem or have a fix?

I do have a powered USB hub but even direct connects stopped working. I have fixed the printer problem now after a number of attempts. I installed the new 10.6.1 patch for SL but this made no difference. I have now re-installed both Rosetta and the Printer Support from the install CD, both of these are optional but clearly very important.
Finally I downloaded again the latest Epson print driver and my printer is now responding. Unfortunately the TomTom still will not connect so I may try reloading that software too.

Since upgrading to iOS7 I can no longer connect to Wi-Fi, what gives?

Under Settings, it shows that Wi-Fi is off ... when I open the option and try to turn it on, nothing happens. The switch won't move.

Hey g00b3r,
It sounds like the Wi-Fi option might be grayed out on your device to where you can't use it. I would follow these steps to resolve the issue:
Verify that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Ensure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
If your issue is still unresolved, perform a software restore in iTunes.
via: iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/TS1559
Cheers,
Delgadoh

Since upgrading to Lion my address book no longer communicates with iTunes? This means that no new information is getting to my iPhone etc? Any ideas? Thanks

Since upgrading to Lion my address book no longer communicates with iTunes? This means that no new information is getting to my iPhone etc? Any ideas? Thanks

Nathan Miah wrote:
Is there absolutely anything else I could do to sort this such as phone Apple Support
If you want.
or maybe install Snow Leopard using the disc it came on with my Mac and just set it up from a Time Machine Backup on my external hard drive (since it works under SL)?
Did you install Lion on an empty partition, or did you upgrade Snow Leopard? If you upgraded, I'd not recommend erasing it, since your backups are apparently gone. It's doubtful Snow Leopard will recognize them.
It's not just backups on the drive either, there are other important things on there, so why won't they show?
Mixing Time Machine backups and other data is not a good idea. See #3 in Time Machine - Frequently Asked Questions. It sounds like the whole disk is corrupted.
I just really don't understand how this happened. Could it not be an issue with WD because they haven't issued firmware to support Lion yet?
If this is a simple external HD, connected by USB or FireWire, no, unless you installed some of WD's software on it. That shouldn't prevent it from being seen at all, but anything's possible.

I can no longer zoom in my messages in mail since upgrading to Lion

I have a Mac Book Pro with an intel i5 processor and 4GB of ram. Since I have upgraded to Lion I can no longer zoom in on my messages in Mail. I was able to do this in Snow Leopard when ever the text size was too small. Is there a way to make the text larger in the body of the messages I receive?

The zoom has been replaced by the pinch and zoom method just as you would do in zoming into or out of a document or photo. Hope this helps.

Swipe no longer works in Firefox since upgrading to Lion.

I can no longer use the swipe gesture to move between pages on Firefox since upgrading to Lion. I have tried it on both the Magic trackpad and the magic mouse. Anyone else haviong this issue?

I, too, have that issue. I've seen posts by folks who have changed the swipe gesture in system preferences. But I can't get that to work. I like the swipe gesture so much that I am using Safari for now. Maybe a solution will be found in the future. I hope so as I really prefer FF.

Print menu different since upgrading to Lion 10.7.4. Pop up menu no longer has Preview and lost paper size selection. Photos all printing credit card size. Still using iPhoto 6.0.6. Have upgraded printer drivers.

Print menu is different since upgrading to Lion 10.7.4. Pop up menu no longer has Preview and lost paper size selection. Photos are all printing credt card size and I can't get it changed. (Have tried changing in Page Setup.) Have upgraded my printer drivers, but still no luck. Still using iPhoto 6.0.6.

A slow boot time can be caused by login items.
User Login Items:
    Flux
    NoSleep
    ClipMenu
    Canon IJ Network Scanner Selector2
    BetterTouchTool
    USBOverdriveHelper
    TotalFinder
    Gmail Notifr
Open System Preferences > Users & Groups > Login Items
Remove one login item noted above then restart your Mac to test. It may be one or multiple items causing the slow boot.

I just upgraded to Lion and switched my web page from MobileMe to Godaddy. But since upgrading to Lion a video I placed on my web page no longer shows up. instead I get "plug-in failure". That didn't happen until the Lion Upgrade what do I do?

I just upgraded to Lion and switched my web page from MobileMe to Godaddy. But since upgrading to Lion a video I placed on my web page no longer shows up. instead I get "plug-in failure". That didn't happen until the Lion Upgrade what do I do?

What's the format of your video? That will give you a hint as to what plugin is failing (or missing).
If you don't know, what's the URL of your site - it shouldn't take long for someone to work out the specifics.

Since upgrading to LION, stuffit doesn't work (get message Power Pc apps no longer supported) So, how to I unzip RAR files now?!?

since upgrading to LION, stuffit doesn't work (get message Power Pc apps no longer supported) So, how do I unzip .RAR files now?!?

Use the current version of Stuffit Expander.
(63916)

Since upgrading to Lion USB devices no longer connect to my virtual machine in parallels despite my parallels settings.

Similar Messages

Maybe you are looking for