Since upgrading to Maverick (?????) my CanoScan 8800F scanner doesn't work with it? Solutions??

Since upgrading (a total misnomer!!!!!!) my CanoScan 8800F scanner is totally not recognized. I tried reinstalling the drivers to no avail. Any suggestions?

Have you downloaded the latest drivers and software?
http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan _8800f#DriversAndSoftware

Similar Messages

Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. the process ends with my mac saying the software is not currently available from the software update server.

Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. I've downloaded the driver software from Canon. My Mac dropbox tells me "the selected printer software is available from Apple", but when I click to download it, the process ends with my mac saying the software is not currently available from the software update server.

Open Finder and click on Go > Go to Folder. Then type
/Library/Printers/Canon
and press Enter. This will show the BJPrinter and iJScanner folders. You could try moving or trashing this folder and then installing the driver that you downloaded from Canon again.

After I upgraded to Mavericks my Epson 5000V scanner is not working properly. I can scan by going into Preference/PrintersScanners to operate the scanner, but I cannot find the output.

After I upgraded to Mavericks my Epson 5000V scanner is not working properly. I can scan by going into Preference/PrintersScanners to operate the scanner, but I cannot find the output. I am trying to save the scan as a PDF in Documents.

Have you installed Apple's latest Epson drivers?
They are here:
http://support.apple.com/kb/DL1398

Lexmark scanner doesn't work with mac os x

I have a problem with my scanner lexmark p4330. For two weeks now it doesn't work with my imac. I have the imac os x 10.7.5.
When I try to scan, my printer displays "the all in one driver did not respond" and in Image Capture it displays "lexmark language error".
I updated my softwares, there's one for lexmark but I can't install it and I don't know why!
Can someone help me please?

Mmm. Not sure what's going on. Has scanning ever worked with the OS you are currently running?
A couple of suggestions (my last two I think as I'm running out of ideas ). I realise that your problems are only with scanning, but sometimes resetting the printing system resloves printing problems. I wonder whether it will help with the scanning issue given that Print & Scan are lumped together in System Preferences. To do it go to:
System Preferences>Print & Scan, Control+Click or Right Click on the printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again using the '+' button.
If that doesn't help my last suggestion is to download the paid for app VueScan (which you can run in demo mode for free) to see whether it works or not. VueScan is very good and driving numerous types of scanners:
http://www.hamrick.com

Mavericks / Canon Canoscan 8800F: Hardware Buttons not working.

I've just upgraded to Mavericks. I've also updated the driver (to 13.9.2a) and installed the latest MP Navigator 1.0 (1.0.7). Is there something else I need to do?
I'm having two problems since the upgrade:
- The hardware buttons on the scanner cover have stopped working
- I'm unable to add the scanner in the System Preferences: Printers and Scanners dialog, because it's not listed as one of the available devices.
However:
- MP Navigator as well as TWAIN - compatible applications (e.g. Adobe Acrobat Pro) are working properly: they are able to see and use the 8800F (even though it's not listed as an available scanner in System Preferences)
Further explanation: The row of hardware buttons on the scanner's cover have stopped working since the upgrade to Mavericks. For example
- The "Copy" button is supposed to launch MP Navigator, scan the document on the glass and print the document.
- "Email" is supposed to scan the document, open a new message in "Mail" and insert the document as an attachment
- There are also several "PDF" buttons that are supposed to scan to a PDF document and do various things with it..
These buttons worked in previous MacOS versions, but none of them do anything since I've installed Mavericks.
Also, in the System Preferences: Printers and Scanners window: I thought I'd try deleting and re-adding the 8800F there to see if that might clear up the buttons problem. I deleted it, but am unable to add it back because it is not listed as one of the available devices. So then I checked the "System Report" under "About this Mac," and found that Canoscan is listed there as one of the USB devices.

Responding to my own post: I've learned that the problem is in the ICA driver for this device, and we're waiting for an update to that to resolve this problem.
For details, please see https://discussions.apple.com/message/23758000#23758000

Canoscan 4400f still doesn't work with mavericks

Followed some earlier threads and downloaded appropriate toolbox and driver, but still doesn't work. I see discussion on the TwainBridge.app but not finding it.

I use a 2007 iMac with 4 GB RAM and Mavericks (10.9). The 4400F support page shows Canoscan Toolbox 5 and a driver for 10.9. Great I thought!!! I downloaded and installed both. Toolbox doesn't even launch. I have to force quit it. The driver installed but I cant add the scanner in System Prefs-Printers & Scanners, does not show up. Vuescan sees it but will not function. No preview, nothing. Image Capture (my fav app for scanning till this) does not see the scanner at all. I have sent feedback on the OS X page as well. From what I can see, just about all scanning (HP/Epson/Canon) was disabled after a Mavericks update. I am waiting for someone (Apple or Canon) to step up and fix this.

Since upgrading to ML, the trackpad handwriting function doesn't work on my macbook air late 2010

Hi All,
I've run into an interesting problem lately. I have several macs in my home and two in particular (the imac and mba) that my parents use had Chinese Handwriting enabled via trackpad. However, since upgrading to Mountain Lion from Lion, those macs have an issue with enabling the Trackpad Handwriting option.
First off, I started to troubleshoot the issue with the iMac. After some fiddling around by turning the function on/off it seems to be fixed. I then went ahead and attempted to perform the same "fiddling" and steps on my macbook air (late 2010), and it just doesnt seem to work. The funny thing is, if I try enable it with the keyboard shortcut, the system seems to acknowledge the shortcut and displays an option in the menu bar to hide the trackpad as shown in the picture. But there's no Trackpad Handwriting to to be seen on the screen. I've even tried resetting the PRAM and SMC with no success. Any solutions?

Try swiping down with two fingers. This solved my problem.

TS4207 Why since upgrading to iOS 7 BBC radio app doesn't work? Says requested URL not found

Since upgrading to iOS 7 my BBC radio app doesn't work. Says requested URL not found on this server. What to do?

Hi makc3d,
Thanks for the response. After all that time I started losing hope.
I would not say that the abvious solution is to remove the tag. I think it should not be put there in the first place if there's no code at all. Moreover, this only happens when exporting a MC from the Library, and it works just fine when exporting normally (publish). It seems more like a bug than an expected behaviour.
Also, AIR should check for actual code in this tag instead of relying only on the tag itself.
Your solution is a nice workaround, and I will certainly try that out. But as I said, it will not fix the original bug, it will only patch it later on in the process.

HP 7310 scanner doesn't work with Mac Mountain Lion

I just tried to scan a photo on my 7310 Officejet All-in-one. It tells me I need to install software for this feature. I know I scanned a photo with this same setup before. However I upgraded to Mountain Lion and now it's not working. I tried to find a download but the HP site tells me all my printer downloads are installed. How do I get the scanner to work? If this is a common problem for people using Mountain Lion why not just create a download for all of us to run? Or a patch perhaps? Thanks for your help.

sc00ba,
I am sorry you are having the issue with your software.
1.) Did you uninstall the software before attempting to reinstall it?
2.) Have you looked at this document to assist in the installation?
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03378792&cc=us&dlc=en&lc=en&os=4142&product=391...
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Musket a3 USB 600 Scanner doesn't work with Yosemite

Hi there,
I have a Musket a3 USB 600 Scanner that doesn't work now that I have upgraded to Yosemite. Does anyone have a recommendation as to how I can use it? As Musktek aren't helpful and have told me they don't have a driver for yosemite... is there a way around this? Any help would be appreciated.

I found this and testing now.
http://www.canon-europe.com/Support/Consumer_Products/products/scanners/Others/P -215.aspx?type=download&language=&os=OS%20X%20v10.10

Any product like the CanonScan LiDe 600F scanner (doesn't work with Windows8)

I had a CanonScan LiDE 600F that allowed me to enter text right on the scanned picture. Allowed me to crop, correct red eye, etc. As I am copying lots of older pictures to do a slide show I would like to continue to show names on the picture so grand children and great grand children will know whom they are looking at. I can't seem to find a Canon scanner that allows this.
Any help would be appreciated - if no Canon's does anyone know of any others? I no longer have the 600F as I could not get any drivers or whateve I needed to work with Windows 8 (which I hate). Doesn't seem to be a scanner forum?

Is this not a W8 driver?
http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan_lide_600f#DriversAn...
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

After upgrade to 10.9 my hp110 scanner doesn't work

After I upgraded to 10.9 my scanner stopped working. I can control the scanner, and it scans okay, but when the file is saved to my Macbook Pro it's just fuzzy lines. Printing is fine....the problem seems to be in how the computer receives the image file for storage.

Are you using Image Capture app? If not trying it from there.

HP 3052 scanner doesn't work with Mountain Lion

So I upgraded MacBook Air to Mountain Lion and everything seems fine except I can't use scanner function on my HP 3052 AiO. The printer still prints OK but I can't see scanner anymore.
Can anybody help me?

Hi,
I affraid scanning is no longer supported for your product while using Mountain Lion, actually the same applies for any Mac OS X version starting from 10.6.
You may find this information stated in here:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03411613 #A2
You may try using an earlier software version (The latest version intended for 10.5), however it is not assured to work and you may try it at your own risk.
In order to install the previous software you may try following the workaround below:
Enter System Preferences > Print & Scan, select the LaserJet 3052 printer and click the Minus sign to remove it.
Download the Mac OS 10.5 software below by clicking the download button:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=1140784&swItem=ma-58935-1&prodNameId=114077 9&swEnvOID=219&swLang=8&taskId=135&mode=4&idx=0
Follow the installation by skipping the Setup Assistant till the installation will finish.
Perform the following steps in order to provide the Setup Assistant the right permissions to complete on Mountain Lion:
Open Terminal from the Utilities folder
Type “sudo “ (with space) in the Terminal.
Locate the HP Setup Assistant in folder Applications/HP LaserJet Software
Right-click (or CTRL+Left click) the HP Setup Assistant and choose “Show Package Contents”.
Open the “Contents” folder and then click “MacOS” folder. It should contain the Unix Executable File of HP Setup Assistant.
Drag the HP Setup Assistant (Unix Executable File) into the Terminal and press enter.
Terminal will ask for the password of the user.
After writing the password press Enter Button.
Now follow the Setup Assistant Steps to complete the installation.
Good luck,
Shlomi

Canon 5600f scanner doesn't work with Snow Leopard

Please someone help - I made the mistake of upgrading to snow leopard. My new Canon 5600f scanner now does not work. Pop up says it has wrong driver. OK.. Downloaded EVERY Canon driver possible + the updated Navigator EX 2.0 software. Note I HAVE downloaded these files, specifically for this model of scanner, specifically for snow leopard: http://software.canon-europe.com/products/0010652.asp. I have rebooted the mac about 4 times. Please, what am i doing wrong?!

Pahu,
I too upgraded to Snow Leopard last night and have been having trouble with my 5600F all day. I'm glad I can still use the scanner in the Image Capture tool, but I would like to use the MP Navigator EX as well. I downloaded:
Scanner Driver 14.8.2
ICA Driver 1.1.1
ver Solution Menu 1.4.0
MP Navigator EX 2.0.4
MP Navigator EX 2.0 Opener
and On Screen Help 1.10
The download area for the MP Navigator EX 2.0 Opener reads "In Mac OS X 10.6, you will need to set up MP Navigator EX 2.0 Opener with Image Capture before scanning using the Operation Panel or Scanner Buttons on the machine."
I'm having trouble setting up the opener in Image Capture. The scanner still scans beautifully through Image Capture, I would just like full functionality back. Any suggestions? Thanks!
Tangor

HP LaserJet M1522nf scanner doesn't work with Windows 10 scan feature

I used the instructions from Honor Student to get my scanner going. However, I did not see "Shell Hardware Detection" anywhere. Please advise!

Hi @inetdude
Since there is no full feature software and driver for 8 or 8.1, I am not sure what else to suggest other than for you to reach out to Microsoft. The driver you are using is an in-OS driver, perhaps they can help you.
Microsoft Community
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Since upgrading to Maverick (?????) my CanoScan 8800F scanner doesn't work with it? Solutions??

Similar Messages

Maybe you are looking for