Since upgrading to mavericks 10.9.2 adobe 8.3.1 does not work

I cannot use the reader .It shows an Apple notice saying it does not support apps not approved by apple. What gives. i am missing important emailed information

Mavericks has many security improvements to help prevent your Mac from becoming compromised, so you may need to reinstall Adobe Reader and then trust the plugin in order to let it load those documents again.
Adobe has a few articles about installing and unblocking the plugin:
Acrobat Help / Install Adobe Reader X | Mac OS
Acrobat Help / Safari 7 and 6.1 block PDFs | Acrobat-Reader
In order to install third party software you may need to temporarily lower the Gatekeeper settings as shown here: OS X: About Gatekeeper
Hope that helps!
- Aysha

Similar Messages

  • Adobe Photoshop Elements 12 does not work with Yosemite 10.10

    My Adobe Photoshop Elements 12 does not work with Yosemite 10.10 nor does my Premier Elements 12. When I try to start them up I get the error message. After uninstalling and reinstalling a few times its still the same. Strangely enough PSE 11 seem to work with Yosemite.  I uninstalled my Premier Elements as well and it behave the same way. How do I get a new copy of Premier Elements 12 to reinstall?

    Just to further test what is happening to my iMac on Yosemite is I downloaded the trial version of Photoshop CC and when I go to launch it it gives mr the same error message as when I try to launch PES 12 or Premier Elements 12. So whatever the problem is it involves all three and so upgrading to Photoshop CC doesn't even help.  Could there be an Adobe file damaged or missing somewhere that is common to these and yet does not effect Revel and Lightroom?

  • Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

    Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

    I received no error message. The application was just trying to find applications unsuccessfully.
    I am using MAC OS 10.10.1
    I tried to uninstall the application  but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
    Otherwise I would have to reinstall everything and this would be a pain.
    Thanks for your help.

  • After upgrading to OS 10.9.1 Aperature 3.2.3 does not work and I'm not able to download new version of Aperature.

    After upgrading to OS 10.9.1 Aperature 3.2.3 does not work and I have not been able to download upgrade of Aperature?

    Is Aperture installed in the "Application"s folder and simply named Aperture?  If not, move it back to "Applications". Did you buy Aperture from the App Store or as a boxed Retail version?
    Relaunch the App Store and sign in with your Apple ID (in the Store menu). Reload the "Purchased" page of the App Store. Do see Aperture on the Purchased tab or perhaps the "Accept" portion of the "Purchased" page? If in the "Accept" portion, accept it to your AppleID  and install it. Else look again at the Update page.
    For some forum members the update did only appear  until after setting the primary system language to English and rebooting the Mac.  This bug is supposed to have been fixed with the update to 10.9.1, but try it, if all else should fail.

  • Reflow in Adobe Reader for Android does not work

    The reflow option in my Adobe reader for Android does not work. The PDF book I am trying to read is too wide to be legible when I fit it into the screen (even in landscape), but the reflow button doesn't change that. When I click it, nothing happens. The only thing I know to do is to uninstall and re-install, but that did not work. Any other tips or ideas?

    Mehwish,
    Thank you so much for responding, and so quickly. I appreciate it.
    It does not appear as though the PDF I am trying to read would have an element in it that would block it from reflow, but that is always possible. It’s a textbook, and I understand that toward the end of the book there are some charts and diagrams, but I haven’t gotten to those chapters yet. So far, I’ve just been trying to use the Adobe Reader to read the introduction and first chapter and nothing I have done has made it reflow.
    I’m enclosing a copy of the entire book. Perhaps you can uncover something in it that I didn’t see.
    Thanks again for you help.
    Stan
    Dr. Stan G. Duncan
    123 Sumner St.
    Quincy, Massachusetts 02169
    617-855-7539 (hm)
    781-504-6875 (cell)
    215-647-7583 (fax)
    508-295-1630 (Ch)
    <mailto:[email protected]> [email protected]
    <http://homebynow.blogspot.com/> http://homebynow.blogspot.com
    <http://www.huffingtonpost.com/stan-duncan> http://www.huffingtonpost.com/stan-duncan

  • After "upgrading" from trial to FCPX 10.0.3 multi cam does not work

    After "upgrading" from trial to FCPX 10.0.3, multi cam does not work anymore. Everything was fine in the trial version, but now the multicam clip I made in trail is shown, but not with the 4 windows, only the first angle can be seen. And I can not find (import) the cuts I made in the trail. The settings are the same in both versions. Am I missing something? Is it possible that I have to start from scratch and all work is lost?
    When I double click the multi cam clip I see all four angles in the timeline, one underneath the other... 
    Any help is appreciated! Thanks!

    There is an excellent podcast tutorial series called "Creative COW Final Cut Help Tutorials Podcast (SD)"
    in the iTunes Store.
    The latest three are video podcasts and go into great depth concerning the new Multicam in 10.0.3
    Can't recommend them enough.

  • Adobe After Effects CS3 does not work on my new iMac

    Hello everyone,
    I recently bought myself a new iMac and Adobe After Effects CS3, and guess what, the stuff does not work. I've tried almost everything, been on a lot of forums but can't seem to find any solution. One thing that keeps coming back is that it has to do with the Geforce 8800 GT in my iMac, some kind of compatibility problem between both.
    The problem is this, whenever I start AE CS3, a window pops up, stating "Out of Memory ( 23 :: 40 )".
    And then something about licensing, but I guess I can skip that window, since that clearly has nothing to do with the problem.
    Are there some beta drivers or something for my videocard that I can download somewhere to maybe get rid of this problem?
    Thanks in advance,
    Maxim

    Maybe an answer at http://www.adobeforums.com/webx/.59b665be/1

  • Thumbnail preview works in adobe reader 9 but does not work in adobe 8.0

    I have small issue. Thumbnail works in adobe reader 9 but but does not work in adobe acrobat 8.0 in win xp

    Anyone going to tell me how to do this uninstalling and installing??????????
    I don't want to mess things up even more! Geez--I'm almost 60 years old,
    need to work and this might be costing me a job. I'm not 20 and text and
    e-mail etc every day. I'm just asking for a little help that as I see it ,
    is due to a "glitch" with Adobe's software. They can easily in their
    technological minds put a warning on anything before someone downloads
    anything such as "If you download this and you  have already downloaded
    that,, then it won't work." How tough would that be??? They, like most other
    major corporations, are in it for the money. What has happened to customer
    service???
    I need a step by step with my hand held and so it won't screw up things even
    MORE. Adobe...get your customer service and your software together...This is
    draining. I may lose a job over it. I need to have my computer running well
    at this point in time as there is no extra time to spend dealing with
    software issue that are a result of Adobe's software incompatibility.
    I was on the phone for TWO hours last night telling people exactly what was
    going on. I even read the error message word for word. No one would help me
    unless I coughed up the money that I don't have...and in addition I will
    lose a job that might get me some money. This is why I am so upset. Why is
    dealing with Adobe always so difficult??? Of course, I am upset. I'm
    actually a lovely person. It is just that this stuff rattles my nerves.
    Especially when there is a jobwith a raiseinvolved that I may lose as a
    result.
    Now I had better get dressed and ready for the job I have now before I am
    late for work and lose that job, too.....

  • The "portable document format" icon is a Word 2010 icon, so selecting Adobe Reader as action does not work to display the PDF.

    In the Applications tab -- Content Type -- the "portable document format" icon is a Word 2010 icon (not Adobe), so selecting Adobe Reader or preview in Firefox as action does not work to display the PDF. I can see this Applications difference because my other Firefox laptop has the Adobe icon, and I can view PDFs. Essentially, a PDF is coming in as a Word document -- and the computer tries to open it up as a Word file.
    How do I get the correct PDF icon in the Applications list -- the same way it displays (and works) on my other laptop.

    Adobe PDF Plug-In For Firefox and Netscape 10.1.7 ?
    I think you need to add this to the list of applications and the action to take on the type of content. This can also be managed in the about:permissions page. [[Permissions Manager - Give certain websites the ability to store passwords, set cookies and more]]

  • HT1338 For the past 2 weeks I have not been able to open any small video on the yahoo page or face book. I get  Blocked Plug In. I have installed Adobe and that still does not work. Help.

    For the past 2 weeks I have not been able to open any small video on facebook or on the yahoo page . I have installed Adobe and it still dies not work. Help.

    Use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.
    See "Hang at exit":
    *http://kb.mozillazine.org/Firefox_hangs
    See "Firefox hangs when you quit it":
    *https://support.mozilla.org/kb/Firefox+hangs

  • Adobe acrobat add ons does not work with latest firefox

    I have been using firefox because of my adobe acrobat add ons.. I alwasy convert pages to adobe pdf using my acrobat. It works with firefox 4.0 but it does not work anymore with latest firefox.
    Can you help me with this?

    Maybe if you read about privacy, policy and sharing of data you'd change your mind. But it was reported that it appeared to work if you used something like the "Add-ons Compatibility Reporter".
    You can force 5.0 "compatibility" with the "[https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ Add-on Compatibility Reporter]" extension, or with [http://kb.mozillazine.org/Extensions.checkCompatibility extensions.checkCompatibility] using about:addons.
    * http://kb.mozillazine.org/Problematic_extensions

  • After the upgrade to Mozilla 32 using csv files to import data does not work anymore. What should I do?

    Hello,
    After the latest upgrade to Mozilla 32 a previously recorded imacros scirpt in which the data was being imported into mozilla from a csv file keeps erroring out. This same problem occurred with the with the upgrade to Mozilla 30 and was fixed when Mozilla was upgraded to 31. Can you please advise on how to correct the problem so that csv files can be used in conjunction with imacros scripts. I would like to point out that imacros still works without the use of csv files, but when you introduce a csv to the script the imacros does not work.
    Thank you,
    Eugene

    hello eugene, please directly contact the imacros extension developers through the means provided at their [http://forum.iopus.com/viewforum.php?f=11 forum] - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon for new firefox versions. thank you...

  • Just upgraded to iOS5 on iPad. Music app and mail does not work properly.

    Just upgraded iPad2 to iOS5. Music app does not work properly. When I select a song to play, it plays a different song. Sometimes, it just stops playing songs, other times, it shuffles songs.
    Not sure whats going on.
    Worked fine using iOS4.3.5.
    Synced the iPad to iCloud. enabled mail. It shows under settings that the iCloud mail is setup, but the mail does not appear in the mail app. Not sure whats happening with these functions on iOS5.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Upgraded LV7 to 8.2.1 and List Folder pattern does not work anymore as it did

    Hi
    I have upgraded LV7 to 8.2.1 and use XP.
    In a vi developed in LV7 I used the List Folder with pattern input to check wether a file name already exist in a folder  (path). This worked very well in LV 7 as the function return the filename if the exisiting filename matched the pattern input. In 8.2.1 this fucntion still exists but it does not return the filename as it used to do which is rather annoying.
    Has anybody else experienced this ie is it a bug? or is the operation of the function changed?
    Thanks in advance for the help.
    Cheers
    Jack

    Hi Jack,
    I can understand your frustration..   We had a thread complaining about the changes when it was first introducted.  Now that I'm used to it, I wouldn't go back..
    However, you can keep all versions of Labview installed on the same PC, meaning that Labview versions 7.0, 7.1, 8.0, 8.2, 8.5 can all happily co-exist on the same PC.  The benefit is that you can use the original version that you developped your code and continue to enhance the code using the original version without having to adapt to the newer version.  However, going up versions should be compatible, unless you are adding new features.
    There is one catch in what I described.  And you must keep a backup copy of your code.  If you open an older version using a newer version and save it, you cannot open it again in your older version, unless you use Save As Previous.  For that reason, it is best to keep an extra copy somewhere (which is always good practice anyway).
    Hope this helps,
    RayR

  • Tried to upgrade the software and my phone crashed...restore does not work

    What do I do?! I tried to upgrade and it stopped at the verifing software...it went to the screen with the USB plug and the Itunes icon. When I try to restore it stops at the same point on the preparing to restore and goes to verifing software. What do I DO! (Iphone)

    Without more information all I can suggest is:
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for