Since upgrading to mavericks anything i connect via usb disconnects

since upgrading to mavericks anything i connect via usb disconnects randomly. everything from ipods, phones and usb thumb drives is there a patch or fix out there. starting to become a pain. PLEASE HELP

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • Since upgrading to Mavericks, I can't connect to my external Seagate hard drive. How to I fix this??????

    I have two Seagate hard drives that were working fine for a couple years until I upgraded to Mavericks. They connect via USB and never show up in Finder.

    I tried to connect a Samsung hard drive. Before Mavericks it was working fine. Now it won't appear in Finder and it can't be mounted in Disk Utility. As with previous issues I reported concerning iOS 7 and Mavericks, I wrote in this forum, but Apple never reacts. People are trying to help each other with workarounds, which is great, but the core issue isn't solved by Apple. It seems after Steve Jobs they're not concerned about quality that much anymore. The fact that I can't use a very common Samsung external hard drive on Mavericks is just way beyond deplorable. And what did I get in return? iBooks?

  • AFP won't connect since upgrading to Mavericks

    Since upgrading to Mavericks I cannot connect to my QNAP TS-210 via AFP; this means my Time Machine can no longer find my backup disk and no longer works. Anyone else having similar issues?
    I have tried the usual quick fixes:
    Firmware is up to date
    All OS updates installed
    Server reset
    DHCP renewed
    DHCP switched to try manual setup
    IP changed on server and Mac
    It's odd as when connecting to server I can enter my login ID and it seems to be validating it ok but then doesnt connect to the server at all?
    Any suggestions welcome!

    Use a supported Time Machine configuration.
    OS X Mountain Lion: Disks you can use with Time Machine
    "Note: Some AFP disks from manufacturers other than Apple don’t support Time Machine. If your network uses an AFP disk, but the disk doesn’t appear in the list of devices available for Time Machine backups, contact the disk’s manufacturer."
    Your complaint is very common with NAS devices. Some work and some don't. If they appear to work, they may fail upon attempting to restore from the backup, or they may fail every time Apple updates OS X. Given the goal of a backup strategy, using anything other than a supported TM configuration is not an option.

  • Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports.  Any su

    Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports.  Any suggestions?
    MacBook Air, OS X Mountain Lion (10.9.1)

    Obviously, syncing an iOS device with iTunes over USB is still supported in Mavericks. Calendar and contact syncing with iTunes is no longer supported. That has nothing to do with your problem.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Messages App| connectivity issues since upgrading to Mavericks

    is anyone having problems since upgrading to Mavericks with connectivity issues in the "Messages" app? Im on a 2011 MacBook Pro. I will start a desktop share session with my folks (IMAC) and within 2-3 minutes of having access to their desktop, I'm unable to control any longer and their system freezes.

    HI,
    When iChat 3 came out someone tested whether it would work on the platform that was running iChat 2 and also tested whether iChat 2 would work on the later OS.
    This eventually led to the Reinstall procedure for iChat 3 up to the iChat 5 version.
    Since then the app has required either a Backup version from when it was working, a copy on another machine running the same OS and app version numbers (the two go hand in hand) or you have to Reinstall the whole OS which will always update you to the latest version of the OS (and in the case of Messages any updates it has had).
    8:01 pm      Saturday; December 21, 2013
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Since upgrading to Mavericks I am finding that I am lucky to get 2 hours (when connected to WiFi) of use from my macbook Pro.

    Since upgrading to Mavericks I am finding that I am lucky to get 2 hours (when connected to WiFi) of use from my Macbook Pro.  I have turned off Bluetooth ( which was not an issue previously), uninstalled Chrome, again not an issue before I upgraded, and have not seen any improvement.
    I was using an older OS system (Snow Leopard) on my 2010 Macbook Pro.  I am wondering now if the upgrade was an unwise move?

    jbuckworth,
    which apps do you run under battery power? Are any of them identified as “apps using significant energy” when you click on the battery icon in the menu bar? If you have a 15-inch or 17-inch model, are your apps using the discrete GPU (which consumes more power than the integrated GPU)?
    How many charge cycles has your battery accumulated?
    How long have you had Mavericks installed? Is Spotlight still reïndexing your boot drive? (It does that whenever your OS is upgraded, because so many files change in an OS upgrade.)

  • Since upgrading to mavericks my macbook has lost it wi-fi connections ,won't recognize it.. it's liked it disappeared -please help..what to do

    Since upgrading to maverick on my macbook, I have lost my wi-fi wireless connection to my airport time capsule and it won't let me turn it back on. All of my other comupers are working fine. My daughter upgraded her macbook pro at the same time and it is working fine. Does anyone know how to fix the problem? Thanks

    When you say "it won't let me turn it back on", what exactly do you mean?  Is there an error message?
    http://support.apple.com/kb/HT4628
    If the above does not help, make a note of your Wi-Fi settings, then try removing Wi-Fi and re-adding it, i.e. go to..
    System Preferences > Network
    ...and click on "Wi-Fi" in the left column.  Then click the minus sign at the very bottom left of this window.
    Reboot and add "Wi-Fi" again by clicking the plus sign and choosing "Wi-Fi" from the drop down list.
    If it's still not working, try resetting the system management controller:
    http://support.apple.com/kb/ht3964?viewlocale=en_US&locale=en_US

  • Since upgrading to Maverick I cannot send/share photos through iPhoto. Dropbox says "not connected to server". All other online email activities work just fine.

    Since upgrading to Maverick I cannot send photos while in iPhoto.  Dropbox says I am not connected to server.
    All other internet email activities work just fine.

    And again why do you think Dropbox is involved in any way?  There is no connection of any sort between iPhoto and Dropbox
    THis sounds like you either need to (my personal suggestion) change your email client to Mail in the iPhoto preferenceemail if you want to use the iPhoto client under the accounts tab delete your account and re-enter it
    Ln

  • Cannot Access Disks on Time Capsule Since Upgrading to Mavericks

    Hey folks...
    So I've had this set up for several years, and it's worked out well. I have a time capsule with an external (self-powered) harddrive connected to it via USB. I usually access it via ethernet as the connection is more speedy than wifi, and my laptop generally remains stationary. For what it's worth, I'm using a Macbook Pro (mid-2010), with the original time capsule (500gb) as well as a connected Western Digital (1tb) external harddrive.
    Since upgrading to Mavericks, however, I have not been able to consistently access the remote disks, either by wifi or ethernet connection.  The time capsule shows up under my "shared" section of the finder window, but the drives (which are usually visible and accessible from within the time capsule) are not there. Strange enough, when I go into my Airport Utility for Time Capsule preferences, the disks are visible under the "disks" section.
    The time capsules' firmware is up to date, as well as the laptop's. I have tried reseting the time capsule as well as my computer in addition to simply unplugging/plugging it back in. I was able to access the disks on a fluke once in the last few days, but after moving the computer away from it's standard spot, the disks are once again no longer accessible.
    I had Server 2.0 but am unable to use it since upgrading the OS and haven't purchased Server 3.0. Any suggestions for solutions? Could residule configurations having to do with the Server functionality be affecting it? I'm guessing it is something to do with Mavericks.  Thanks for any help or feedback.
    Mitchel

    I don't have a guaranteed solution to your problem, just some suggestions:
    1) Try powering down the Time Capsule for at least 15 minutes, then plug it in again and see if it works better.
    2) If you suspect that heat might be a problem, try raising the Time Capsule to give better air flow below it.  I have mine on an inverted plastic-coated-wire basket of the type used to organize kitchen drawers.
    3) If AirPort Utility can "see" the Time Capsule, you should be able to use the "archive" function (in the Disks panel, Disks tab) to write the disk's contents to a drive connected to the Time Capsule's USB port.
    4) In the worst case, you should be able to access the files on the Time Capsule's disk by opening up the Time Capsule, removing the disk drive, mounting the drive in an external enclosure, and attaching the enclosure to your Mac.

  • Macbook pro running painfully slowly since upgrade to Mavericks and worse since Yosemite

    Hi, since upgrading to Mavericks my previously excellent 2011 Macbook Pro is running painfully slowly, and things have only got worse since the upgrade to Yosemite. It takes anything up to 10 minutes to get fully functional from opening the lid on standby, can take a good 5 minutes to connect to wifi, and I am getting stuck with constant spinning beach balls. I've cleaned things up, and deleted anything unnecessary so I have adequate space on the HDD but this doesn't seem to make any difference, and I'm not running any particularly memory hungry software. It was working perfectly before these upgrades and I'm really wishing I could just downgrade back to Mountain Lion now! I'm no expert so could really use some help. Do I just need more RAM or is this something more complicated?
    I've run Etresoft and here are the results (I note there is some adware listed on Safari, but I don't use it ,using Chrome and Firefox instead):
    EtreCheck version: 2.1.8 (121)
    Report generated 2 March 2015 18:26:15 GMT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 466
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 384 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 11 days 21:24:0
    Disk Information: ℹ️
        ST9320325ASG disk0 : (320.07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 318.84 GB (87.34 GB free)
                Core Storage: disk0s2 319.21 GB Online
        MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Extensions
        [not loaded]    com.joshuawise.kexts.HoRNDIS (6 - SDK 10.6) [Click for support]
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.AirPlayUIAgent.plist
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.CallHistorySyncHelper.plist
        [killed]    com.apple.cmfsyncagent.plist
        [killed]    com.apple.coreservices.appleid.authentication.plist
        [killed]    com.apple.EscrowSecurityAlert.plist
        [killed]    com.apple.pluginkit.pkd.plist
        [killed]    com.apple.printtool.agent.plist
        [killed]    com.apple.recentsd.plist
        [killed]    com.apple.SafariNotificationAgent.plist
        [killed]    com.apple.sbd.plist
        [killed]    com.apple.scopedbookmarkagent.xpc.plist
        [killed]    com.apple.security.cloudkeychainproxy.plist
        13 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.AssetCacheLocatorService.plist
        [killed]    com.apple.awdd.plist
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.diagnosticd.plist
        [killed]    com.apple.emond.aslmanager.plist
        [killed]    com.apple.icloud.findmydeviced.plist
        [killed]    com.apple.ifdreader.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.periodic-daily.plist
        [killed]    com.apple.periodic-monthly.plist
        [killed]    com.apple.periodic-weekly.plist
        [killed]    com.apple.sandboxd.plist
        [killed]    com.apple.softwareupdate_download_service.plist
        [killed]    com.apple.tccd.system.plist
        [killed]    com.apple.wdhelper.plist
        [killed]    org.cups.cupsd.plist
        16 processes killed due to memory pressure
    Launch Agents: ℹ️
        [running]    com.brother.LOGINserver.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [running]    com.akamai.single-user-client.plist [Click for support]
        [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [failed]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
        [failed]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
        [failed]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        FlowSync    Application  (/Applications/FlowSync.app)
        Google Chrome    Application Hidden (/Applications/Google Chrome.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        NP_2020Player_IKEA: Version: 5.0.94.1 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    Safari Extensions: ℹ️
        Searchme  [Adware! - Remove]
        RoboForm
    3rd Party Preference Panes: ℹ️
        Akamai NetSession Preferences  [Click for support]
        Flash Player  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: ON
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 318.84 GB Disk used: 231.50 GB
        Destinations:
            Time Machine [Local]
            Total size: 500.10 GB
            Total number of backups: 13
            Oldest backup: 2014-02-24 23:22:29 +0000
            Last backup: 2015-02-09 22:20:02 +0000
            Size of backup disk: Too small
                Backup size 500.10 GB < (Disk used 231.50 GB X 3)
    Top Processes by CPU: ℹ️
            11%    WindowServer
             1%    launchd
             1%    Safari
             0%    Google Chrome
             0%    NotificationCenter
    Top Processes by Memory: ℹ️
        219 MB    firefox
        112 MB    Google Chrome
        56 MB    systemstatsd
        47 MB    Finder
        43 MB    WindowServer
    Virtual Memory Information: ℹ️
        52 MB    Free RAM
        957 MB    Active RAM
        920 MB    Inactive RAM
        1.23 GB    Wired RAM
        58.33 GB    Page-ins
        1.38 GB    Page-outs
    Diagnostics Information: ℹ️
        Mar 1, 2015, 03:19:06 PM    /Library/Logs/DiagnosticReports/Google Chrome_2015-03-01-151906_[redacted].cpu_resource.diag [Click for details]
        Mar 1, 2015, 01:18:49 PM    /Library/Logs/DiagnosticReports/firefox_2015-03-01-131849_[redacted].hang
        Mar 1, 2015, 01:17:11 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/plugin-container_2015-03-01-13 1711_[redacted].crash

    Use the link below to remove CleanMyMac2.
    http://macpaw.com/support/cleanmymac/knowledgebase/how-to-uninstall-cleanmymac-2
    Then, review the options below to determine which method is best to remove the Adware installed on your computer.
    The Easy, safe, effective method:
    http://www.adwaremedic.com/index.php
    If you are comfortable doing manual file removals use the somewhat more difficult method:
    http://support.apple.com/en-us/HT203987
    Also read the articles below to be more prepared for the next time there is an issue on your computer.
    https://discussions.apple.com/docs/DOC-7471
    https://discussions.apple.com/docs/DOC-8071
    http://www.thesafemac.com/tech-support-scam-pop-ups/

  • Problems downloading movies since upgrading to mavericks

    Ever since upgrading to mavericks when it was first released, I have had nothing but problems downloading movies in iTunes. What normally would take no more than 30 minutes to download a movie and iTunes extras has now turned into waiting more than 3 hours with no less than 4 error messages saying iTunes cannot download the movie and I have to relaunch iTunes or reboot my entire system. It is getting quite annoying and I can't seem to find a solution.
    Any help would be greatly appreciated.
    Thank you in advance.

    I upgraded to Mavericks on two computers and have display problems too! I have CC on one Macbook Pro (2011) and CS6 on another (2012) and I'm now almost positive my display problems are triggered by InDesign. I don't have to be doing anything special, and I don't have to be working in InDesign at the time, but InDesign has to be open and I get things like this:
    Once it turns magenta or green, that's when I have to boot the system. I can still work with the glitchy display before it turns colors and if I'm still able to quit InDesign while it's glitching, the display goes back to normal. Same on both computers and the 2011 one has a new logic board in it.
    At first I thought it had something to do with connecting my hard drive or my external display, but the display issues happened with both computers with nothing hooked up. Those are ruled out now. I took my 2012 computer to Apple and they told me it was a software issue and all my hardware is ok. Obviously they didn't fix the software issue because it's still happening.
    This is not normal and needs to be fixed soon!

  • Since upgrading to Mavericks I have to force shut down to close frozen applications

    Hi all,
    Since upgrading to Mavericks I have experienced several times that sometimes when an application close a simple force quit is not enough. The application will disappear from my dock but remain on screen with the spinning ball, and any instances of the application I try to open will also freeze instantly. The only way to clear them is to do a force shut down via the power button on the back of my computer. I have experienced this with Mail, VLC and Finder so I do not think this an issue with a specific program. If anyone is having the same problem or has an idea of how to fix it, it would be much appreciated

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Problems since upgrading to Mavericks

    I am experiencing problems with CC applications since upgrading to Mavericks. Mostly Screen and display issues.
    In Photoshop, the top menu bar where the red, yellow , green window buttons normally sit has disappeared and it seems I cannot drag the window down to reveal (if that is the problem)
    In Indesign, The program opens but I cannot see any workspace at all, even when I open an existing ID file.
    Premiere Pro, Bridge,  appear to work OK
    After effects and Muse indicated both required upgrades, yet the CC application Manager does not indicate any upgrades required or available.
    I have not tried other apps.
    Is anyone else experiencing problems since upgrading to Mavericks and if so, does anyone know if Adobe are working on fixes?

    I upgraded to Mavericks on two computers and have display problems too! I have CC on one Macbook Pro (2011) and CS6 on another (2012) and I'm now almost positive my display problems are triggered by InDesign. I don't have to be doing anything special, and I don't have to be working in InDesign at the time, but InDesign has to be open and I get things like this:
    Once it turns magenta or green, that's when I have to boot the system. I can still work with the glitchy display before it turns colors and if I'm still able to quit InDesign while it's glitching, the display goes back to normal. Same on both computers and the 2011 one has a new logic board in it.
    At first I thought it had something to do with connecting my hard drive or my external display, but the display issues happened with both computers with nothing hooked up. Those are ruled out now. I took my 2012 computer to Apple and they told me it was a software issue and all my hardware is ok. Obviously they didn't fix the software issue because it's still happening.
    This is not normal and needs to be fixed soon!

  • Since upgrading to Mavericks, Final Cut Pro X has challenges uploading videos to You Tube

    Since upgrading to Mavericks OS X, when I upload a video from Final Cut Pro to You Tube it takes several tries to upload. The error message is: "Unable to share video to You Tube, Network Connection Timed Out (or Lost.(" On average it takes at least four tries. This absolutlely did not happen before the Mavericks upgrade. Any help would be appreicated.

    Typically people who run old OS versions hold on to them because certain software versions are most stable on that OS. (Or because their hardware doesn't support later versions.) And they are loath to try and do anything to disturb that eco system – accepting the fact that they are running a system that is no longer supported by the manufacturer and often the applications' developers.. For whatever reason, you disturbed that eco system by reinstalling the OS..
    Final Cut didn't upgrade itself. It's just that the version you had that was "running like a dream" is no longer available from the App Store…for your OS.
    If you want some ways out, either: restore the app from your system backup; upgrade your OS to at least Mountain Lion and you may he able to download an older version of Final Cut; or create a separate bootable volume and install a later OS that will support 10.1.x.
    Russ

  • Can't access Time Machine files since upgrading to Mavericks

    I have searched the community and found that people have experienced issues backing up to Time Machine since upgrading to Mavericks, but my problem appears slightly different from the ones I've found.  I can see that my Time Machine is actually backing up since the upgrade as it was before the upgrade.  The issue I'm having is that I can't access the backed-up files in any way. 
    When I try to open time machine it launches the "space view" with all of the historical tabs lined up for me to scroll through, but imediately closes that window and gives the error message: "Can't connect to a current Time Machine backup disc".  It's so weird, because it says that there have been backups completed since the upgrade (most recently this morning).  If it wasn't writing to the disc, it would have showed me an error of some sort.
    What I am, specifically, trying to accomplish is that I need to restore some iTunes playlists that I somehow managed to delete this past weekend.  I figured that I would easily be able to access the library file that contains the playlists from Saturday morning, when I KNOW that playlist was still there, and just restore it.  Now that I am seeing that I can't access any of my time machine files, I'm realizing that I have an even bigger problem, and that all of my files are, essentially, going without backup at this time (assuming I can't access the files that have already been backing up).
    If anyone has some insight as to how I can fix this problem, I would greatly appreciate it.

    Hi John, (The above was for your attention) I'm 72 and must've hit the wrong button!!!
    I followed your instructions to the letter, but sadly, no success...all my backups are showing on the TM external HD, but I cannot access them after instsalling 'Mavericks'
    I spent the entire day on and off the phone with Applecare (they are very nice, and I'm sure they know most of the stuff needed; but not this problem. They are phoning back tomorrow as the senior chap was not available.
    I love my apple products, and like you, have been using their gear for well over 25 years...not studying the things, but using them all the way through.
    My present Mac,  a 24" iMac is nearly 7 years old, bought on December 11th 2007, and this is the first time I have had a significant problem, and never a virus..got bless em!. I bet there are not many Windows users around who can say the same!
    However, if I cannot access my backups, I'm a bit lost, as all my accumulated stuff is there!
    I guess the worst case scenario is that I revert to OS X 10.7.5, and wait 'til the bugs are ironed out in Mavericks....Ho Hum
    Message was edited by: briinoz

Maybe you are looking for

  • How do I extend the end of a video clip?

    Hi, I have placed my video clip in my composition and at the end of it, I want to extend the last frame of that video all the way to the end. Just freeze the last frame. How do I do this? I searched this forum using search terms like "extend" and "fr

  • Writing Academy Leader

    Hello, all. I'm getting ready to score my feature in Logic. I want to have a QT video with the movie's first frame (beginning titles and music) timecode at 01:00:00:00. This will only be a video export. No audio, as I am planning on OMFing my audio i

  • I have ipad air 16gb, whilst travelling I want to download some movies so I am able to watch on my device what is the best way to do this

    I have a ipad air  16gb... I have just returned from overseas and wanted to download a few movies, then I discovered  I could only get 2 downloaded. So this tells me I haven't enough storage. So, my question is can I purchase more gb/storage or is th

  • Trouble starting CentOS after installing XE

    After tackled XE on Window XP and 10g DS, I moved on to Linux. I installed CentOS 4.2, and everything seemed to work fine. Then I installed 10g XE with Start XE when CentOS boots up. Everything seemed to be fine, and I was able to login through the X

  • To Make WBS element Mandatory for a particular Document type- Contract

    Hi , I have a requiment where I have to make to Make WBS element Mandatory for a particular Document type of Contract . I don't want to use any User exits or Badis for this . Please let me know if there is any configuration that can be done to achiev