Since upgrading to Mavericks, I can no longer see my Time Machine or printer on the network.

I have uninstalled printer and re-installed drivers but no printer is showing when I click to + new printer.
Also the TM can no longer be seen... Suggestions?
Printer = Dell 1760NW
Both the printer and the Time machine are showing 'green lights'
thanks in advance

Regarding the printer:
From: sterling r: https://discussions.apple.com/thread/5506493?tstart=0
If that does not help then from braden85:
This first article is about changing or updating printer software in Mountain Lion, and can be found here:
OS X Mountain Lion: Change or update printer software
http://support.apple.com/kb/PH10622
This next article tells you where to find the printer software for your specific printer brand:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/ht3669

Similar Messages

Since upgrading to Lion i can no longer see other computers in my network and vice versa. What has gone on?

As the title suggests! I can no longer see any of the computers in my network, Mac or otherwise.
I have checked sharing permissions on all required computers and all seems to be good and have disabled firewalls.
I notice a few people have had similar problems with screen sharing but I am not even seeing another station to pottentialy share a screen with!
MBP 2.4GHz Intel Core 2 Duo
OS X - 10.7

Regarding the printer:
From: sterling r: https://discussions.apple.com/thread/5506493?tstart=0
If that does not help then from braden85:
This first article is about changing or updating printer software in Mountain Lion, and can be found here:
OS X Mountain Lion: Change or update printer software
http://support.apple.com/kb/PH10622
This next article tells you where to find the printer software for your specific printer brand:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/ht3669

Help: Can no longer see old time machine backups

Hello everyone and thank you for your help.
I have two computers, a Power Mac G5 tower and a Mac Book Pro both backing up using time machine to a USB drive connected to my Time Capsule. Previously my backup drive was connected via usb to my airport extreme, however when I moved the drive my Power Mac G5 stopped being able to see its old backups. However my Mac Book Pro can still see its backups. Both have always connected via WIFI for backups.
Also my G5 tower takes a very long time to "prepare" its backups (usually much longer than 30 minutes) while my mac book pro does not, any insight into why this might be?

Dude, was having the same problem; just saw this solution in the FAQ listed below you. It worked for me, just hold down the Option key while you click on the TM button and select "Other backups".
I had the same setup as you, an external drive that's been used as both an Airport disk and a locally mounted drive. TM gets confused when you switch it up like that.
17. What if I can't see my backups, or the Backups for a different Mac, via Enter Time Machine ?
TM keeps the backups for each Mac separate, and normally only shows the ones for the Mac it's running on, even if there are other Macs' backups on the same disk/partition.
Also, sometimes TM will start a new "sequence" of backups, as if they were from a different Mac.
To see these "other" backups, you need the (badly named) Browse Other Time Machine Disks option. It's available by holding down the Option key while selecting the TM icon in your Menubar, or by control-clicking (right-clicking) the TM icon in your Dock.
You'll see a selection screen showing all the disks/partitions that have TM backups on them. Select the one you want, and you'll be taken to the normal TM "Star Wars" interface, where you should see all the backups on that disk/partition.
This is the 3rd version of this tip. It was submitted on July 05, 2009 by Pondini.

Since upgrading to Mavericks, I can no longer connect to my Bose Sounddock 10 via Bluetooth. It was fine under Mountain Lion

Pairing my Bose Sounddock 10 to my Macbook Pro (early 2011) via Bluetooth was fine under Mountain Lion. After installing Mavericks, connection failed. I deleted the Sounddock & attempted to pair it again. I get an occasional 'flash' in the 'Devices' list, but no pairing occurs.
I have no issue pairing the Sounddock to my iPad running iOS 7.0.3.
Has Bluetooth been changed for Mavericks?
Is anyone else experiencing similar issues?

I actually have the same problem, since I upgraded to Mavericks my MacBook Pro can't seem to find the Bose sounddock 10. Has anyone found a solution to this.
It still works with the iPhone 5
Thank you

Since upgrading to Mavericks, I can no longer share my documents via email. It never gets to the mail page. Any ideas?

Once I upgrades to Mavericks, I first had trouble viewing my old documents saved in iCloud. Apple Support phone call solved this. Now I notice I cannot share any of my documents/pages via email. It never gets past the "next" page for sharing via email. Anyone with same problem?

I actually have the same problem, since I upgraded to Mavericks my MacBook Pro can't seem to find the Bose sounddock 10. Has anyone found a solution to this.
It still works with the iPhone 5
Thank you

10.9.2 Mavericks and can no longer connect to our SMB file share on the network.

Smb was working under 10.9.1. Now smb and usning the finder I get "connection failed". Both of my NAS are not out when i am using my mac book pro thru the wifi connection. Is any one else have the same problem?

Same story here - smb:// worked under 10.9.1, but the Update 10.9.2 broke it.
Some facts:
Mac Book Pro Retina 2012
Network connection is over WLAN (The connection is very stable and no issues else where)
The issue seems to be caused when there are larger files (> 500MB) in the share
smb:// works for shares with lots of folders but only small files in them
smb:// and cifs:// are both almost unusable
smb:// shows a blank screen for ages- Finder will eventually hang up
cifs:// will connect fast (wow!), but the connection is very unstable for larger files
The funny part is, that Mavericks (pre 10.9.2) was the first OS X which fixed most SMB issues of its predecessor. (SMB2 was somwhat slow, but quite usable) Now, I can not really use my Mac to work...
Moral of the story, I think I will switch to Ubuntu 14 when it is released in April - it should support HDPI Displays.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Since updating to Mavericks, i can no longer use my USB Ethernet Adopter

Since updating to Mavericks, i can no longer use my Ethernet USB adopter as the drivers are only supported to the previous version. I need to use this where i work as Mac's cant accsess the wireless. Ive been told the only option restore to the prev OSX.. The only problem is i havnt set up time machine.
Is there anything i can do to either revert to the original OSX ( the mac is only a month old) or restore to an older version without using timemachine.... Or even better just get my Adoptor to work?
Any help would be very much appriciated as i can only go for so long with the internet at work.
Thanks

Regarding the printer:
From: sterling r: https://discussions.apple.com/thread/5506493?tstart=0
If that does not help then from braden85:
This first article is about changing or updating printer software in Mountain Lion, and can be found here:
OS X Mountain Lion: Change or update printer software
http://support.apple.com/kb/PH10622
This next article tells you where to find the printer software for your specific printer brand:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/ht3669

After upgrading to Maverick, I can no longer access iTunes Store.

Hi,
After upgrading to Maverick, I can no longer access to iTunes stores. The layout for Mac AppStore also doesn't display properly. Perhaps the most annoying part is when I need to access secure website (even google.com), where I need to authorize the certificate. My current connection is behind proxy, but have no issues on all this issues before upgrading to Maverick. Please assist.

Hello segordon21,
Thanks for using Apple Support Communities.
To move voice memos to your computer please follow the steps from the iOS 8 Help below.
Move recordings to your computer
You can sync voice memos with the iTunes library on your computer, then listen to them on your computer or sync them with another iPhone or iPod touch.
When you delete a synced voice memo from iTunes, it stays on the device where it was recorded, but is deleted from any other iPhone or iPod touch you synced. If you delete a synced voice memo on iPhone, it’s copied back to iPhone the next time you sync with iTunes, but you can’t sync that copy back to iTunes a second time.
Sync voice memos with iTunes. Connect iPhone to your computer, then in iTunes select iPhone. Select Music at the top of the screen (between Apps and Movies), select Sync Music, select “Include voice memos,” and click Apply.
Voice memos synced from iPhone to your computer appear in the Music list and in the Voice Memos playlist in iTunes. Voice memos synced from your computer appear in the Voice Memos app on iPhone, but not in the Music app.
Move recordings to your computer
Take care,
Alex H.

Since upgrading to Mavericks my iMac no longer recognizes my digital camera. iPhoto will open, but my camera never appears in the source list or goes into import mode. Help!

Since upgrading to Mavericks my iMac no longer recognizes my digital camera. iPhoto will open, but my camera never appears in the source list or goes into import mode. Help!

I found that if you open iMage Capture App that seems to trigger iPhoto to open and thew camera is connected. At least that happens with my camera. Good luck.

Myairport utility can no longer find my time machine or Air port express

can any one help my airport utility can no longer find my time machine or Air port express

Try connecting an Ethernet cable from your Mac to the Time Capsule to see if that allows AirPort Utility to "see" it.
By the way, don't confuse "Time Machine",backup software included with OS X since version 10.5, with "Time Capsule", an Apple Wi-Fi base station with an integrated disk drive.

After port forward, airport utility can no longer see my time capsule

I tried to forward public port 1025 to private port 80 on a raspberry pi using airport utility. But after I did that, the airport utility can no longer see my time capsule. Wifi still works correctly. Are there any conflicts about port 1025? How to fix that other than resetting the time capsule?
Thanks,
Michael

It doesn't sound like a port that is used.
From the standard google search.. nope.
Reboot the whole network..
No luck tell me what OS version you are running the utility on and what model and firmware TC???
Note with Yosemite, anything can and will happen.

I can no longer see my pictures.....the screen is white boxes but when I click on the box an exclamation point pops up. Please Help!!!!

I can no longer see my pictures.....the screen is white boxes but when I click on the box an exclamation point pops up. Please Help!!!!

The exclamation point occurs when iPhoto breaks/loses the file path to the original file. So try the following: make a temporary, duplicate copy of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot AND
the option to rebuild the small thumbnails.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Since upgrading to Mountain Lion, I cannot restore emails with time machine. In Lion TM created a folder in Mail called recovered emails(or similar) No such folder is created since ML. I am able to see the email I want to restore, but it then disappears

Since upgrading to Mountain Lion, I cannot restore emails with time machine. In Lion TM created a folder in Mail called recovered emails(or similar) No such folder is created since ML. I am able to see the email I want to restore, but it then disappears

I am inside Mail, waiting for the TM 'recovered mail' folder to appear - which it doen't.
I only looked in my home folder after trying several times from within my Main app.
Marion

Can anyone tell me what this Time Machine error means? The network backup disk does not support the required AFP features?

Can anyone tell me what this Time Machine error means? The network backup disk does not support the required AFP features?

AFP - Apple Filing Protocol
The Network Attached Storage (NAS) that you are pointing Time Machine at does not have the features needed by Time Machine in order to do its Thing. Time Machine needs some specific features that are not typically available on generic networked storage devices.
There are manufactures that support the Mac OS X HFS+ file system formats and implement all the needed AFP protocol packets necessary so that they can be used with Time Machine, but apparently yours does not.
If you are not using a networked mounted volume for Time Machine, then more information will be needed about your Time Machine setup.

Since upgrading to Mavericks, I can no longer see my Time Machine or printer on the network.

Similar Messages

Maybe you are looking for