Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Similar Messages

How can I run 2 Dreamweaver windows at the same time?

How can I run 2 Dreamweaver windows at the same time on my
PC?
basically I have 2 monitors and I want to edit CSS on one
monitor and have the html page open on the other so I can quickly
look from one to another with in a split second instead of taking
that extra time to switch back and forth using the tabs at the top,
I know I should probably invest into a mac so i can work out side
of the Dreamweaver application window and I will in the future but
is there any way i can do this on my windows XP pro PC?
Thank you
Maurice

Open the CSS in DW, and use F10 to open the Code Inspector.
Place the
latter as needed.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Random_Yggdrasil" <[email protected]> wrote
in message
news:gi2htb$j4j$[email protected]..
> How can I run 2 Dreamweaver windows at the same time on
my PC?
> basically I have 2 monitors and I want to edit CSS on
one monitor and have
> the
> html page open on the other so I can quickly look from
one to another with
> in a
> split second instead of taking that extra time to switch
back and forth
> using
> the tabs at the top, I know I should probably invest
into a mac so i can
> work
> out side of the Dreamweaver application window and I
will in the future
> but is
> there any way i can do this on my windows XP pro PC?
>
> Thank you
> Maurice
>
>
>

My SB Audigy 2 card can't use headset and musicamplifier at the same time

Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
please help, thx.
Michael

If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
Another option:
Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
--> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
= You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
.jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

Running Leopard and Tiger at the same time VMWare fusion/Parallels?

Hello,
I was wondering, is it possible to run Tiger and Leopard at the same time? Some older applications won't run properly in Leopard. The iMac came both with Tiger and Leopard (last November). It has been described elsewhere that one can install Tiger and Leopard on separate partitions and switch by rebooting. But it would be nice if one could run Tiger in Leopard like one can run Windows/Unix using VMWare Fusion or Parallels. Is that feasible?
best wishes

I agree with you that virtualizing Mac OS X would be great. I'm an Apple technician and it would really help with my work. But Apple's EULA does not permit the use of OS X in a VM. They changed OS X Server's EULA recently to permit it, but not the "client version".
So your Mac can virtualize nearly any OS out there, but not OS X. And I believe (not sure) that a VM of OS X Server will only run on OS X Server.

Running RIPv2 and OSPF at the same time

What are the problems with running RIPv2 and OSPF at the same time if any? I have the gear capable of that and I have been doing this for over a year now. I wanted to get rid of RIP but my couterpart is scared because he is not OSPF skilled. I do have some remote sites with old 1601s to consider. Any suggestions or recommendations.
Thanks

Hi Friend,
OSPF is far better than RIP when it comes to performance and advatnages compared to RIP and no doubt in that though it is complex to implement compared to RIP but once done it is smooth.
It is important to have a very well designed network with OSPF otherwise the behavior is unpredictable sometimes and it may not give desired results.
Also for your low capability routers like 1601s you can put them into stub or total stubby area so that they may have less load on them.
HTH
Ankur

Can WRT54G use WPA and WEP at the same time?

I used to have a smc 802.11b wireless router and a dlink 802.11b wireless print server.
In order to have WPA and a firewall, I replaced the wireless router with a linksys WRT54G.
Then I realize the dlink print server, even though it has the "g" keyword in the model name, does not do WPA (DP-G321).
Do I have to buy a 802.11g wireless print server? Or is there another solution?
I don't supposed the linksys router can do both WPA and WEP at the same time?
Connecting the print server to the router with a cable is not feasible. They are on different floors.

both of your devices are has a wireless b technology settings, just set a wep encryption on your network rather than wpa because some wireless b devices don;t work with wpa. with regards to your query if wep and wpa can be used at the same time, the answer is no.

Can't recording Midi and Audio at the same time

I'm in GREAT need of help. I can't record midi and audio at the same time. I'm using an M AUDIO project mix I/O. I know this is VERY basic stuff but I can't seem to get it to work.I can record multiple audio at once. ANd I can record midi but not at the same time. PLEASE help . Is there a setting somewhere I need to change ? Thanks
Tracy

Hi!
Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

Can we use exceptions and conditions at the same time?

can we use exceptions and conditions at the same time? Are there any dependencies between exceptions an conditions?

Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions

Running steps and sequences at the same time

Hi,
I need to run some steps and sequence at the same time in my application due to test time restrictions. I am using Teststand 2.0. Colud you please describe me the methodology.

Hi,
Synchronization Step types came in at version 2 and there should be an example in the \teststand\examples folder.
Regards
Ray Farmer
Regards
Ray Farmer

Can I run Tiger and Leopard on the same computer

Hi folks.
I've been meaning to install Leopard for ages but have never got round to it (I bought the retail box when it first came out). I have upgraded my RAM to 2GB and my hard drive to 320GB with no problems.
My upgraded hard drive has been partitioned into 2 equal parts of 160GB. These appear on desktop as Mackintosh HD1 and HD2. HD1 is the disk with all my files, music, OS etc and HD2 is empty
I have 2 bootable clones of my present system - one is on a 160GB external and the other is the original 80GB HD that I replaced.
My question is this - can I install Leopard on to my 160GB external HD, then clone it on to the empty HD2. If I do this would I be able to run both Tiger and Leopard on the same Macbook?
Is there any problems with this plan? Would I be able to transfer between the 2 OS and how do I install Leopard on the external drive. Is it just a case of inserting the Leopard DVD and choose the external drive as the target?
As usual thanks in advance
Del

# Original Tiger in the internal HD, New Leopard in the external HD.
# New Leopard in the internal, Legacy cloned Tiger in the external.
# Split internal, one partition with Tiger, another with Leopard.
Leopard is backwardly compatible with older Macs, just make sure yours fulfills the minimum system requirements, both use the same filesystem format, so each can see the other. You can't run both at the same time, unless you purchase the server version of Leopard and run it virtualized. 99.9% of Firewire external HD's are bootable, some USB's are bootable but have to test first. You can choose which system to boot from by pressing the Option key at boot time, before the chime. Just make sure the external HDD is plugged in and turned on if that's where you want to boot from.
When I migrated my PBG4 from Panther to Tiger, got an external FW HDD, cloned Panther onto it, upgraded using Archive and Install, cleaned up, customized and tested it. When I was satisfied all was ok, cloned the original Panther onto another partition of the external HDD, wiped and tested for failure the internal HDD, then cloned the known good and tested Tiger into it. Only thing that died along the way was my old and ancient Photoshop v2.x, that refused to run on Tiger.

Can i run multi-pull accounts at the same time

Can i run multi-pull Facebook accounts at the same time so as to help keep other family members happy

Thanks for the link Philipp it is not quite what i am looking for i would like to run both accounts at the same time and this does not allow that from what i can see

Run CS3 and 8 at the same time on mac?

I want to download a trial version of the CS3 and run it, at
the same time, as my existing Dreamweaver 8 on my G5 Mac running
10.4.10. (It is NOT an Intel Mac.) There is a 30 day trial and this
way, in the downtime between projects, I can test out and use the
CS3 version and make sure it is stable on my system, learn to use
it a bit, set it up the way I would want it, but always be able to
cut back to 8 in a pinch if I have mission critical work that must
get done. I know 8 like the back of my hand and know nothing about
CS3 version, so I like the safety net of being able to run them
both.
Any issues with this? Is it possible? Will it break anything
- like with my stable and running CS2 apps and Acrobat 7?

On Fri, 22 Aug 2008 04:46:57 +0000 (UTC), "yuytjtdh"
<[email protected]> wrote:
>I want to download a trial version of the CS3 and run it,
at the same time, as
>my existing Dreamweaver 8 on my G5 Mac running 10.4.10.
(It is NOT an Intel
>Mac.)
You can have several versions of Dw on your system ( I have
Dw2004 up
to CS4 beta ) but you can only have one running at a time on
a
standard machine.
>There is a 30 day trial and this way, in the downtime
between projects, I
>can test out and use the CS3 version and make sure it is
stable on my system,
>learn to use it a bit, set it up the way I would want it,
but always be able to
>cut back to 8 in a pinch if I have mission critical work
that must get done. I
>know 8 like the back of my hand and know nothing about
CS3 version, so I like
>the safety net of being able to run them both.
>
> Any issues with this? Is it possible? Will it break
anything - like with my
>stable and running CS2 apps and Acrobat 7?
CS3 is rather stricter about code - so depending on how well
your code
validates - it may complain if there are any problems.
Bear in mind that CS4 may be released sometime in the next
few months
- there is no public info when that will be - so maybe better
to wait
for that.
~Malcolm~*...
~*

HT1222 The music in my iTunes library run together and play at the same time.

The music in my iTunes library run together andplay at the same time.

The "bar" at the bottom does not say anything about all of your songs being on the iPod. It just shows you how much of its storage capacity is being used, based on what is on the iPod.
If you see "On This iPod," that means the iTunes sidebar (along left side of window) is not visible. This is easier to describe with the sidebar visible, so from the iTunes menu bar, under View, select Show Sidebar.
Select the iPod in the sidebar, under DEVICES. There is a bar of buttons near the top, starting with Summary. Click on Music next to Summary. This is the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
Check the box for Sync Music. You can choose to sync Entire music library, if (?) your iTunes music library fits on the iPod. With this setting, your entire iTunes music library syncs to the iPod, and new songs get synced automatically. A 7th gen iPod nano is 16GB, so your iTunes music library would have to be less than 16GB (not counting non-music content on the iPod). Otherwise, you can choose to sync Selected playlists, artists, albums, and genres. Then, select (checkmark) the playlists, artists, albums, and/or genres you want on the iPod from the lists below. If you want newly added songs to sync to the iPod, they must be part of your selection. For example, you can add them to a playlist that you have selected for syncing to the iPod.
When you click Apply, the songs from your selection sync to the iPod. Going forward, changes to your iTunes library (based on your settings on the iPod's Music screen) sync automatically to the iPod, the next time it is connected (or when you click Sync).

Can we use CS6 and CC at the same time on different machines?

We have a Creative Cloud subscription and have software downloaded to an iMac and also to a PC. I understand that we can't use the applications on both machines at the same time, but could one of my colleagues use the CS6 versions at the same time on the PC?

Hi Carol
A subscription to Creative Cloud gives you access to the CC version and the CS6 version of the software. From the original question, it seemed to me that they were asking if they can share the subscription between 2 colleagues if one used the CC version and the other used the CS6 version. That is not permitted as the subscription is licensed to one user.
If you have a Creative Cloud subscription and a perpetual license for CS6 then you can use them concurrently on 2 machines as they are separate licenses.
Does this help clarify?
Thanks
Bev

Can psc2510 work connected and wireless at the same time?

My PSC2510 all-in-one is connected to my desktop the old-fashioned way. Can I get my laptop to print wirelessly from the same printer?

I'm pretty sure that USB and wireless connections can work at the same time on this printer. Just make sure the same PC is not connected by both USB and wireless. The software will get "confused" as to which way to communicate with the printer.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

Similar Messages

Maybe you are looking for