Since upgrading to Mavericks mail no longer saves password

Upgraded to Mavericks and since then every time I start mail it asks for my password. I went into mail prefernces under accounts and noticed my password was not eneterd. I entered the password and saved it but when I return to the account preferences it is lost. Any ideas?
Vito

Ι found the solution!
Go to internet accounts in system preferences and deactivate Mail service.
After that go to MAIL preferences and add the icloud mail account.
it will be fine!

Similar Messages

  • Since upgrading to Mavericks, Mail is extremely slow to load preview pane or show email when mailbox is double-clicked. Is this a known issue?

    Since upgrading to Mavericks, Mail is extremely slow to load the preview pane or show email when mailbox is double-clicked. Is this a known issue? Or is there a solution to this issue?

    Hi AngieLynch,
    Thanks for visiting Apple Support Communities.
    It sounds like you're seeing some unexpected behavior in Mail.
    Before troubleshooting on your computer, I'd strongly recommend backing up your data to an external hard drive with Time Machine, if you haven't already. This article can help with setting up Time Machine:
    Mac Basics: Time Machine backs up your Mac
    http://support.apple.com/kb/ht1427
    Next, try creating a new user account on your computer. You can add your email account to Mail in the new user account. If Mail is more responsive in the new user account, then Mavericks is working fine and the behavior is caused by conflicts in your own Mail or user account. 
    These articles walk you through creating a new user and setting up Mail:
    OS X Mountain Lion: Create a new user account (applies to Mavericks, too.)
    http://support.apple.com/kb/PH11468
    Configuring Mail for your email account
    http://support.apple.com/kb/HT1277
    Best,
    Jeremy

  • Since upgrading to mavericks sd no longer recognized

    Since I upgraded to Mavericks, my imac will not recognize my SD card. I have tried rebooting to no avail.
    The card is good, since it works in an old Windows laptop and it did work in my imac prior to Mavericks.
    (OSX 10.9.4, 3.06 Ghz Intel core i3, 4 GB 1333 Mhz DDR3)

    Ι found the solution!
    Go to internet accounts in system preferences and deactivate Mail service.
    After that go to MAIL preferences and add the icloud mail account.
    it will be fine!

  • Since upgrading to Mavericks, Mail does not display the count of unread messages

    Hi,
    I upgraded to Mavericks from Snow Leopard (on a Macbook Pro mid 2009) when Maverick went out.
    Since then the count of unread messages in the Inbox is not displayed on the Dock Icon, nor in the app itself (the label Inbox does not change to bold with a count of unread messages when I do have unread messages).
    I did when to see the preferences of the app to see if the move from Snow Leopard to Maverick changed anything but I could not see anything odd.
    Anyone having the same problem?
    Thanks in advance.
    Cheers,
    Martin Monnier

    You have posted in an Exchange Server forum, not a Communigate forum.  I recommend that you post in a Communicgate forum, or you can try the Outlook forum: 
    http://social.technet.microsoft.com/Forums/en-US/outlook/threads
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Missing Camera Since Upgrading to Mavericks

    Since upgrading to Mavericks, I no longer have a camera; not in FaceTime, Photo Booth, nor when video calling on Facebook. 
    This morning while video calling on Facebook, I could see the person I called for about 30 seconds.  She then dsappeared and I could only see me, even though I could talk with her.
    How can I get my camera back?

    Marjean54 wrote:
    I could only see me,
    If you could see an image of yourself on the screen, then the camera was working! Sounds more like you lost the video connection to your friend -- as if HER camera wasn't working!!
    You can tell when the camera is on, as a green light is next to the lens.
    Some video apps have preferences where you have to specify what the video input source is. In PhotoBooth, it's the "Camera" menu.
    It's possible that the camera is faulty, but I suspect its software.

  • Since upgrading from Mavericks to Yosemite Mail, Spotlight,Mission Control and App-Store don´t work correctly. Is it possible to return to Mavericks?

    Since upgrading from Mavericks to Yosemite Mail, Spotlight, Mission Control and App-Store don´t work correctly. Is it possible to return to Mavericks?

    If you have an external drive with an OS X Time Machine backup, then do restore of your last backup. If you have an external drive  with a bootable clone of your previous system, you can boot to that clone and re-clone the OS X on your external drive back to your Mac's internal drive.
    If you do not have either of these available, then the reverting/restoring process becomes much more complicated and involves purchasing an external drive and backing up your current system to that drive, then erasing, reformatting your hard drive and now your only options to installng an OS X version is doing a clean install of OS X 10.6 Snow Leopard, then upgrading, again, to either OS X 10.7 Lion or 10.8 Mountain Lion. OS X 10.9 Mavericks is no longer available for download and Apple has not made OS X 10.9 Mavericks available in any other form to be able to redownload and install.
    Maybe it would be better to explain in detail your issues with Yosemite to see if any of us here can help you with your difficulties.
    I am not running or using Yosemite, so I cannot help you with your Yosemite issues,
    There are others here who can help you with Yosemite.
    Good Luck.

  • Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

    Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
    Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Mail not receiving emails since upgrading to Maverick

    I have been having nothing but issues using the Mail program since upgrading to Maverick earlier this year.  I can't get my incoming emails to sync normally (I have multiple different accounts set up from different servers), sometimes they come in with no issues and other times they don't show up for hours or after I manually restart the program/computer.  I know there is a huge delay because they come in on my phone and iPad without any issues.  This is a huge problem for me since I use Mail for all my work emails and I can't log into all the different web applications easily.  Can anyone give me any suggestions??  I've tried taking the accounts offline and then resyncing them and sometimes it works but lately it isn't doing the trick either.    Here is my mail version I'm using :  Version 7.3 (1878.6)  and I'm in OSX 10.9.5  I haven't upgraded Yosemite because my last upgrade to Maverick was such a headache...  Please help!!!

    Hey there lasmith4,
    I see that you are experiencing some issues with troubleshooting Mail on your Mac. Here is an article that should be able to take you through some more relevant troubleshooting steps for this issue:
    OS X Mail: Troubleshooting sending and receiving email messages - Apple Support
    http://support.apple.com/en-us/TS3276
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display.  There is only a blank space that after about 1 minute, has a small box with a question mark.  How can I go back to attached images?

    Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display.  There is only a blank space that after about 1 minute, has a small box with a question mark.  Double clicking on the box will open the image in a separate window.  It's very slow and tedious for multiple images.  How can I go back to attached and displayed  images?  If I click on "Forward", the images appear instantly in the email to be forwarded.

    Scott,
    My problem seemed to fix itself.  Or, by shutting down the computer one night, instead of putting it to sleep, may have reset something.  Since updating to Mavericks, I always (or usually) let the computer sleep overnight or anytime I'm walking away from it.  A few days ago, I was updating notes for my kids about how to find all my stuff and how to turn on my computer, so I wanted to rewrite the start-up procedures for the iMac, just in case they ever need to.  Well, I shut it down one night so the following morning, I could write down each step.  Lo and behold, the images, etc. are all there again!  Solved, but I'm not sure why.
    Tom

  • Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. the process ends with my mac saying the software is not currently available from the software update server.

    Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. I've downloaded the driver software from Canon. My Mac dropbox tells me "the selected printer software is available from Apple", but when I click to download it, the process ends with my mac saying the software is not currently available from the software update server.

    Open Finder and click on Go > Go to Folder. Then type
    /Library/Printers/Canon
    and press Enter. This will show the BJPrinter and iJScanner folders. You could try moving or trashing this folder and then installing the driver that you downloaded from Canon again.

  • Since upgrading to OS5 I know longer receive notice of incoming mail unless I actually click the mail icon.

    Since upgrading to OS5, I no longer receive notificatios of incoming mail unless I actually click the mail icon. Then it connects to the server and loads mail. Any answers?

    Go to System Preferences > iCloud and make sure your account info is correct, delete the password and reenter to be sure it is clean.  Go to Mail and then open Preferences and check the account informaiton for the iCloud account and again, delete and reenter the password for the account.  Sometimes the passwords get garbled during an upgrade.

  • My HP5610 office jet no longer scans since upgrading to Mavericks. Help! Any ideas?

    My HP5610 office jet no longer scans since upgrading to Mavericks. Help! Any ideas?

    Check and see if there is an updated driver:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=4 41125&

  • Since upgrading to Mavericks my iMac no longer recognizes my digital camera.  iPhoto will open, but my camera never appears in the source list or goes into import mode.  Help!

    Since upgrading to Mavericks my iMac no longer recognizes my digital camera.  iPhoto will open, but my camera never appears in the source list or goes into import mode.  Help!

    I found that if you open iMage Capture App that seems to trigger iPhoto to open and thew camera is connected.  At least that happens with my camera.  Good luck.

  • Since upgrading to mavericks I cannot scroll with my mouse in mail - I have to use the keyboard arrows

    since upgrading to mavericks I cannot scroll with my mouse in mail - I have to use the keyboard arrows

    Hopefully this is what you are looking for: 
    Canon MP560 series:
      Status: Idle
      Print Server: Local
      Driver Version: 10.84.2.0
      Default: Yes
      Shared: Yes
      URI: usb://Canon/MP560%20series?serial=254057
      PPD: Canon MP560 series
      PPD File Version: 10.84.2.0
      PostScript Version: (3010.000) 705
      CUPS Version: 1.7.2 (cups-372.4)
      Scanning support: Yes
      Scanning app (bundleID path): -
      Scanning app version: -
      Scanner UUID: 00000000-0000-0000-0000-323534303537
      Printer Commands: PrintSelfTestPage ReportLevels
      CUPS filters:
    Raster2CanonIJ:
      Path: /Library/Printers/Canon/BJPrinter/Filters/Raster2CanonIJ/Raster2CanonIJ.bundle/ Contents/MacOS/Raster2CanonIJ
    Hope

  • Since upgrading to Mavericks, some spelling errors are no longer corrected

    I almost always transpose the word "the" to hte and teh when I type.  Spell checker in Pages picks it up and corrects it but not in Mail, only since upgrading to Mavericks a couple weeks ago.  I went in to my Library folder and found a Custom dictionary, an "en" dictionary, and a LocalDictionary, all text files with words that I had added over the years.  I thought if Mail's spell checker wasn't finding hte and teh, that I must have somehow added them to one of the dictionaries.  But neither word appeared any of the three dictionaries.  If it did, I would have deleted them.  Is there another dictionary in Mavericks that I am missing? 
    This seems odd since it started only after upgrading to Mavericks.  And I have both misspellings included in "Correct spelling automatically" in Language & Region Preferences > Keyboard Preferences > Text > Replace __ With __.  I even tried to remove them and then add them back in but it made no difference.

    Hello.  I too have a Mail spelling issue since Mavericks.  My mail has never made any automatic corrections - only suggestions - and I am not sure how to get that going.  Anyhow, these days when the speller doesn't recognise a word and I go in and add an accent to that word (alt+e+e), it infuriatingly sends the message immediately without continuing the spellceheck.  Any ideas gratefully received.

Maybe you are looking for

  • Listing of all file names in a directory

    Hello everyone, Is there a way to get the listing of all file names in a directory pointed by an entry in dba_directory in oracle into a collection in pl/sql procedure. Thank you. Tuncay

  • Gmail Syncing Problem

    My 2G iPod Touch is giving me a headache. For the past few days my Gmail account which is set up for the mail.app isn't working right. When I send an email or delete an email all the messages are put in the default "All Mail" folder the app creates a

  • Rebate Agreement credit memo - sold to party

    Hi all, Users settle rebate with VB(7 and then create credit memo to the customer.  Bill to party address is printing on the invoice form but they also need sold to party to be printed on the invoice.  In the credit memo bill to party and sold to par

  • Closed Won/Closed Lost report

    Hi, I need to run 2 reports. One on when an opporunity was changed to closed lost and one when an opportunity was changed to closed won. Does anyone know a way of doing this? Thanks in advance, Darren

  • Multiplication duplication contacts with ITunes - Outlook 2010

    My contacts are multiplied by ITunes. I am of use for Outlook 2010 and Windows 7. I do not publish my contact data in ICloud. I synchronize directly with the PC. Another problem consists in the fact that contact groups no more existing are shown on I