Since upgrading to Mavericks my Interface and hard drive are shutting down when Mac put to sleep

Hi,
Since upgrading to Mavericks, when I put my Mac to sleep both my audio interface and my time machine hard drive are put to sleep also. Effectively making it so that when I start up my macbook again it means removing both the aforesaid from the usb outlets and putting them in again so that the mac recognises them.
This means two things. First of all all my time machine backups fail that are attempted whist the mac is put to sleep, whereas before they succesfully ran. It also means that my audio interface does'nt work and has to be re-set.
Anybody have the same kind of USB / Sleep issues?
Many thanks in advance.

Hello jamieesa,
You might cosider resetting your system's SMC and PRAM.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/PH14222
Cheers,
Allen

Similar Messages

Since I upgraded to Mavericks, my Maxtor external hard drive doesn't work. What gives ?

Since I upgraded to Mavericks, my Maxtor external
Hard drive does not work. It is FireWire to
Thunderbolt . When I connect it it crashes. What
Gives ?j

Maxtor, must be an old one.
There is a disconnect occurrence in some cases with FIREWIRE ext. HD and Mavericks.
(indications mentioned on the Mavericks board)
This is known and being looked into.
Ive looked into this much myself.
Suggest using another Mac and offloading data onto a USB3 and using same until there is resolution.
Any normal USB ext. HD is working fine.
Peace

I can not get the new updates because my start disc and hard drive are full, I need 1.98 GB.

I can not get the new updates because my start disc and hard drive are full, I need 1.98 GB.

Some folks recommend OmniDiskSweaper to allow you to review your stuff to find possible candidates to throw away.
Even if you throw away some stuff and your desired "1.98GB", then what? If that's the number you need for the update, you'll just use most or all of the reclaimed space with the update and you are right back to where you started.
You don't specify what kind of machine you got but presumably it's a mac pro since you posted in the Mac Pro community. In which case just get yourself another drive or two and move stuff around to free up your boot drive.
[Perhaps you should hurry too since I expect hdd prices might be going up due to possible impending hdd shortages.]
Finally, if some of those updates are major system updates you want extra drives for backups because I always recommend you never do major updates to your system without backups to that system.

I have a 4s and the camera keeps shutting down when I try to take a picture. What's going on? What is the solution?

I have a 4s and the camera keeps shutting down when I try to take a picture. What's going on? What is the solution?

Delete all data from following location on your machine and try updating again.
Mac OS: ~/Library/Application Support/Adobe/AAMUpdater/1.0/
Let me know if it works for you.
Regards,
Ashutosh

TS1702 Since I updated to ios6 my City of Warfare game shuts down when I try to go to battle. I removed my original game app and reinstalled a new game, which I had to start from the beginning and it still crashes. I'm sure that others are having similar

Since I installed ios6 my City of Warfare game shuts down when I try to battle. I removed my original game and reinstalled a new game app which started a new game..and it still shuts down, help?

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Hard Drive Space goes down when I turn on AirPort and go online.

So, when I turn the AirPort on on my MacBook Pro you can see the hard drive space go down on the bottom of a finder window. When I turn AirPort off the the GB available on the hard drive stays the same. I'm not downloading anything. that I know of. Is some virus downloading in the background that I can't control? I did a full scan with VirusBarrier Express and it says that there are no infected files on the computer. Any help would be greatly appreciated. Thanks!

Robert Thomas123 wrote:
when I turn the AirPort on on my MacBook Pro you can see the hard drive space go down on the bottom of a finder window.
Welcome to Apple's discussion groups.
Launch the Console utility and look in the "All Messages" category for repeated messages. If you see such messages but you don't understand what they mean, copy a few of them and paste them into a reply to this thread.
Is some virus downloading in the background that I can't control?
That's extremely doubtful.

My mail won't open or close and I can't shut down my mac

My mail won't open or close and I can't shut down my Mac

Same here.
Can't be. This forum covers pre-2006 iMacs; MacBook Pros have a completely different architecture and therefore different issues. For Mail problems, the best place to post is in the forum for your OSX version from the list here:
Mac OS & System Software
BTW, my wife and I both use Apple mail and have not had any issues from about OSX 10.6 on. Admittedly, when Mail was introduced with OSX thirteen years ago, it had some real problems, but they seem to have been fixed.

Firewire for interface and hard drive

I have a firewire Lacie external hard drive and m-audio 410 firewire interface, does using firewire for both affect the overall performance in logic express, or firewire and usb is better?

Hi John,
I use usb and firewire just because my audio interface doesn't have firewire.
Also, has been using booth firewire ports on my PowerBook, with the Lacie on one and a camera on the other importing video, and had no problems.
So, I think you're ok, you have a G5, Firewire's faster, you really shoudn't have reasons to worry. Give it a go!
regards,
Jorge

How connect laptop to interface and hard drive given only 1 FireWire port?

For connections involving
- MacBook Pro (new model)
- LaCie external hard drive (for audio)
- Apogee Duet (interface)
... how/in what order do I daisy chain?
Out of MacBook Pro into hard drive, out of hard drive into Duet?
Some other solution/way?
Thanks.

I've been doing it:
MacB into HD, HD into Duet
Since I've been dealing w/issue/problem in post just next to yours, I got a chance to answer!

Firewire chain for external audio interface and hard drive

I use Logic Studio 8 on a Macbook Pro with a Presonus Firebox, an external Lacie Firewire hard drive for audio recording, and another Lacie Firewire drive for backups.
Is there a recommended chain order when chaining my Firewire devices together? I read somewhere on a ProTools forum that they recommend putting their Firewire audio interface Mbox2Pro at the end of the chain.
So right now I have Macbook Pro -> Backup Drive -> Audio Drive -> Presonus Firebox. I once had it in a different order with the audio drive first, but I found it was reading more slowly from/to the audio drive when it was in that order. I have no idea technologically why this would be the case.

I just found and joined this great forum. Following up on Ray's comments about his MacBook set-up, I have a similar MacBook 2ghz, 4mb ram, 9400 chipset, and am exploring getting into Logic Pro 8 and was wondering if my MacBook was underpowered, and whether I needed to step up right away to a MacBook Pro because of my lack of PCI slots for recording audio to an external eSATA drive.
I was encouraged to hear that the USB 2.0 connection for Ray's external WD 7200 hard drive has worked and improved things and his audio isn't getting choked and he is not getting the clicks and other problems.
I'm wondering if Ray or anyone else has any other tips on using a MacBook for Logic and for optimizing one's setup. And Ray, did you notice a point at which the clicks started? .. in terms of number of tracks? Or were they present from the outset? I'm wondering how many tracks you are running now on your system.
I might mention that I don't have an audio interface yet but was impressed with what I've read about the Apogee Duet. Any comments on interfaces and the Duet?
By the way, I'm just recording one instrument/one track at a time and perhaps occasionally two instruments at a time. And right now, my main purpose for getting into Logic is for editing and mixdown of pre-existing tracks that have already been created on a standalone hard-disc based DAW. If all goes well and if I like the whole Logic experience I'd expect to get a more powerful MacBook Pro or even a Mac Pro or whatever higher end iMac exists in the future.
To summarize, all I'm intending to do initially with the MacBook is:
1) transfer individual digital tracks from a standalone hard disc-based DAW into Logic for mixdown and mastering.
2) Record a few extra new tracks one at a time - probably not using any instrument plug-ins but relying on external synth/sampler/guitar sound sources ..in each song (maybe 3-4 tracks at most), and
3) apply standard effects like reverb and EQ and panning to the mix down and master songs, each song containing a of approx 25-40 tracks.
My basic question is, can a MacBook 2Ghz with firewire 400, 4gb memory and USB2.0 to external hard drive handle this or is it underpowered? Thanks.
Derek

Bus power (firewire): both Audio interface - and - hard drive ? Risk

Is there a known risk to damage to the firewire controller (MacBook Pro April 2008 rev) if I connect both a Motu Traveler bus-powered audio interface and a G-Tech 5400 rpm bus-powered drive.
I seemed to recall seeing if one does this, there is a risk of "burning out" the firewire port on the MacBook Pro. Is this a real risk ? Is anyone doing this ? More generaly, what are the risks of chaining multiple bus-powered devices together ?
Thanks up front ...

Is there a known risk to damage to the firewire controller (MacBook Pro April 2008 rev) if I connect both a Motu Traveler bus-powered audio interface and a G-Tech 5400 rpm bus-powered drive.
I seemed to recall seeing if one does this, there is a risk of "burning out" the firewire port on the MacBook Pro. Is this a real risk ? Is anyone doing this ? More generaly, what are the risks of chaining multiple bus-powered devices together ?
Thanks up front ...

My external hard drives are causing problems when i capture DV in FCP

We have external hard drives (2 different brands lacie and WD) are causing dropped frames when I capture DV in FCP. This only happens when they are connected via firewire 800. When I connect them using USB everything works great. Any ideas why this could be? We have 2 of each drive and 2 older mac pros and they both have this issue with every combination of drives I try. I've also tried reseting the ports with no luck...

Connecting your camcorder to even 1 FW drive constitutes daisy-chaining. Even if you have two FW ports in your Mac, connecting a drive to one port and your camcorder to the other is the same as daisy-chaining as far as your Mac is concerned.
Try capuring from your camcorder with no exernal FW drives attached. Verify that works before trying anything else.
Also, I noticed your profile says you have a Mac Pro. You might consider adding a FW card in order to get extra FW ports that are not on the same FW bus as the built-in FW ports. Then you could connect your external FW drives to the card; and your camcorder to the built-in ports and it should work.

Why does my external hard drive LACIE shut down on its own

I have an LACIE 500G external hard drive connected to my iMAC via USB which has recently (a couple of weeks) started to shut down by itself. This does not happen when I use it on a PC. What's the problem and how can I solve it?

Go to: Apple > System Preferences > Energy Saver and check to make sure that the box for "Put hard disks to sleep when possible" is unchecked.

Where on my hard drive are my pictures when I import to iphoto?

After importing pics from my phone and ipad into iphoto, where are these pics on my hard drive? I expect to see them in finder under photos?

The pics are actually stored in a buried folder in your iPhoto library. You can get to them directly without going through iPhoto by the following:
Control-click or right clich on the Photots icon in your Pictures folder. You will see an option to Show Package Contents. Click on that and you will see a list with an option for Originals. Within that folder are numerous folders that contain your actual pictures. You will have to drill down several more layers of folders to actually find them but they are there.
The process suggested by mende1 may be simpler, though.
Hope this gives you another option.

Imac shuts down when it goes to sleep and has to be restarted

if my computer falls into sleep mode it automatically shuts down and i have to hold power to start up. When it restarts it says it was a kernel panic. I have tested all the hardware with the tools disk and all systems passed. I am running Lion.

Fri Dec 9 10:09:34 2011
Panic(CPU 0): Unresponsive processor (this CPU did not acknowledge interrupts) TLB state:0
RAX: 0x0000000000000000, RBX: 0x00007979fac09996, RCX: 0x0000000009000000, RDX: 0xffffff8000821078
RSP: 0xffffff800010be20, RBP: 0xffffff800010be20, RSI: 0x00000000283baec0, RDI: 0xffffff8000821078
R8: 0xffffff81c940d6c8, R9: 0x0000000000000000, R10: 0x8000000000100000, R11: 0x0000000000000200
R12: 0x0000000000000000, R13: 0xffffff800022a400, R14: 0xffffff8000821068, R15: 0xffffff80008bfaa8
RFL: 0x0000000000000046, RIP: 0xffffff80002b3688, CS: 0x0000000000000008, SS: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff800010bca0 : 0xffffff80002c781c
0xffffff800010bcd0 : 0xffffff80002c2790
0xffffff800010bd20 : 0xffffff80002d7d3f
0xffffff800010be20 : 0xffffff800023eb66
0xffffff800010be60 : 0xffffff800023ece8
0xffffff800010be90 : 0xffffff800022a5d3
0xffffff800010bed0 : 0xffffff800023e75e
0xffffff800010bf20 : 0xffffff80002b1df2
0xffffff800010bf50 : 0xffffff80002c7859
0xffffff800010bf80 : 0xffffff80002c2790
0xffffff800010bfd0 : 0xffffff80002d7bd2
0xffffff81d363bc90 : 0xffffff7f80edc94a
0xffffff81d363bcf0 : 0xffffff7f80f26dee
0xffffff81d363bd10 : 0xffffff7f80f27b24
0xffffff81d363bd30 : 0xffffff7f80f27f0f
0xffffff81d363bda0 : 0xffffff7f80ed67a7
0xffffff81d363be20 : 0xffffff7f80ecfc94
0xffffff81d363be60 : 0xffffff7f80f00295
0xffffff81d363be80 : 0xffffff7f80ecbcbd
0xffffff81d363bec0 : 0xffffff7f80e8c542
0xffffff81d363bef0 : 0xffffff8000639966
0xffffff81d363bf30 : 0xffffff80006386e0
0xffffff81d363bf70 : 0xffffff8000638584
0xffffff81d363bfb0 : 0xffffff8000820057
      Kernel Extensions in backtrace:
         com.apple.driver.AirPort.Atheros40(501.58.1)[13BE9AFD-5158-3CD9-B5E9-AAF5BE3062 B4]@0xffffff7f80e6d000->0xffffff7f80facfff
            dependency: com.apple.iokit.IOPCIFamily(2.6.7)[6D54F06A-46B7-37FC-AF22-DE68DC18A1A3]@0xffff ff7f80822000
            dependency: com.apple.iokit.IO80211Family(411.1)[BF69D46E-3F5C-35C5-8167-9F872E3B20AA]@0xff ffff7f80e35000
            dependency: com.apple.iokit.IONetworkingFamily(2.0)[025587B0-DC55-3E39-A129-51843993A0AB]@0 xffffff7f80910000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: iMac12,2 (Mac-942B59F58194171B)
System uptime in nanoseconds: 133565094533867
last loaded kext at 51723496435173: com.apple.driver.AppleUSBCDC    4.1.15 (addr 0xffffff7f807bd000, size 16384)
last unloaded kext at 51808067572897: com.apple.driver.AppleUSBCDC    4.1.15 (addr 0xffffff7f807bd000, size 12288)
loaded kexts:
com.apple.filesystems.afpfs    9.8
com.apple.nke.asp_tcp    6.0.1
com.apple.driver.AppleHWSensor    1.9.4d0
com.apple.filesystems.autofs    3.0
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.driver.AppleUpstreamUserClient    3.5.9
com.apple.driver.AppleMCCSControl    1.0.26
com.apple.driver.AppleHDA    2.1.3f7
com.apple.driver.AppleMikeyDriver    2.1.3f7
com.apple.driver.AudioAUUC    1.59
com.apple.driver.AGPM    100.12.42
com.apple.kext.ATIFramebuffer    7.1.4
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleSMCLMU    2.0.1d2
com.apple.driver.AudioIPCDriver    1.2.1
com.apple.driver.ACPI_SMC_PlatformPlugin    4.7.5d4
com.apple.driver.AirPort.Atheros40    501.58.1
com.apple.ATIRadeonX3000    7.1.4
com.apple.driver.AppleLPC    1.5.3
com.apple.driver.AppleBacklight    170.1.9
com.apple.driver.AppleIntelHD3000Graphics    7.1.4
com.apple.driver.AppleIRController    312
com.apple.iokit.SCSITaskUserClient    3.0.1
com.apple.driver.AppleUSBCardReader    3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.iokit.IOAHCIBlockStorage    2.0.1
com.apple.driver.AppleUSBHub    4.5.0
com.apple.driver.AppleEFINVRAM    1.5.0
com.apple.driver.AppleFWOHCI    4.8.9
com.apple.iokit.AppleBCM5701Ethernet    3.0.8b2
com.apple.driver.AppleAHCIPort    2.2.0
com.apple.driver.AppleUSBEHCI    4.5.5
com.apple.driver.AppleACPIButtons    1.4
com.apple.driver.AppleRTC    1.4
com.apple.driver.AppleHPET    1.6
com.apple.driver.AppleSMBIOS    1.7
com.apple.driver.AppleACPIEC    1.4
com.apple.driver.AppleAPIC    1.5
com.apple.driver.AppleIntelCPUPowerManagementClient    167.1.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1
com.apple.driver.AppleIntelCPUPowerManagement    167.1.0
com.apple.security.SecureRemotePassword    1.0
com.apple.driver.AppleUSBHIDMouse    170.4
com.apple.kext.triggers    1.0
com.apple.driver.DspFuncLib    2.1.3f7
com.apple.driver.AppleAVBAudio    1.0.0d11
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.iokit.IOSurface    80.0
com.apple.iokit.IOBluetoothSerialManager    4.0.1f4
com.apple.iokit.IOSerialFamily    10.0.5
com.apple.iokit.IOAVBFamily    1.0.0d22
com.apple.iokit.IOFireWireIP    2.2.4
com.apple.driver.AppleHDAController    2.1.3f7
com.apple.iokit.IOHDAFamily    2.1.3f7
com.apple.iokit.IOAudioFamily    1.8.3fc11
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.ApplePolicyControl    3.0.16
com.apple.driver.AppleSMC    3.1.1d8
com.apple.driver.IOPlatformPluginFamily    4.7.5d4
com.apple.iokit.IO80211Family    411.1
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.driver.AppleGraphicsControl    3.0.16
com.apple.driver.AppleBacklightExpert    1.0.3
com.apple.driver.AppleThunderboltEDMSink    1.1.3
com.apple.driver.AppleThunderboltEDMSource    1.1.3
com.apple.kext.ATI6000Controller    7.1.4
com.apple.kext.ATISupport    7.1.4
com.apple.iokit.IONDRVSupport    2.3.2
com.apple.driver.AppleIntelSNBGraphicsFB    7.1.4
com.apple.iokit.IOGraphicsFamily    2.3.2
com.apple.driver.AppleHIDMouse    170.4
com.apple.driver.AppleUSBHIDKeyboard    152.3
com.apple.driver.AppleHIDKeyboard    152.3
com.apple.driver.AppleThunderboltDPOutAdapter    1.5.8
com.apple.driver.AppleThunderboltDPInAdapter    1.5.8
com.apple.driver.AppleThunderboltDPAdapterFamily    1.5.8
com.apple.driver.AppleThunderboltPCIDownAdapter    1.2.1
com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController    4.0.1f4
com.apple.iokit.IOBluetoothFamily    4.0.1f4
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.0.1
com.apple.iokit.IOBDStorageFamily    1.6
com.apple.iokit.IODVDStorageFamily    1.7
com.apple.iokit.IOCDStorageFamily    1.7
com.apple.iokit.IOUSBHIDDriver    4.4.5
com.apple.iokit.IOAHCISerialATAPI    2.0.1
com.apple.iokit.IOSCSIBlockCommandsDevice    3.0.1
com.apple.iokit.IOUSBMassStorageClass    3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.0.1
com.apple.driver.AppleUSBMergeNub    4.5.3
com.apple.driver.AppleUSBComposite    3.9.0
com.apple.driver.XsanFilter    403
com.apple.driver.AppleThunderboltNHI    1.3.2
com.apple.iokit.IOThunderboltFamily    1.7.4
com.apple.iokit.IOUSBUserClient    4.5.3
com.apple.iokit.IOFireWireFamily    4.4.5
com.apple.iokit.IOEthernetAVBController    1.0.0d5
com.apple.iokit.IONetworkingFamily    2.0
com.apple.iokit.IOAHCIFamily    2.0.7
com.apple.driver.AppleEFIRuntime    1.5.0
com.apple.iokit.IOUSBFamily    4.5.5
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    165.3
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    331
com.apple.iokit.IOStorageFamily    1.7
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.4
com.apple.iokit.IOPCIFamily    2.6.7
com.apple.iokit.IOACPIFamily    1.4
Panic(CPU 2): Unresponsive processor (this CPU did not acknowledge interrupts) TLB state:0
RAX: 0xffffff802e9bc240, RBX: 0xffffff80008ba500, RCX: 0xffffff8025a99e80, RDX: 0x0000cc6f00000000
RSP: 0xffffff81c94bfe60, RBP: 0xffffff81c94bfe90, RSI: 0x0000cc6fdf2c6744, RDI: 0xffffff80008ba500
R8: 0x000000001e0277e0, R9: 0x00000000000003d3, R10: 0xffffff80008baf70, R11: 0x00000000cccccccd
R12: 0xffffff8025a99e80, R13: 0xffffff800022a400, R14: 0xffffff80008ba4c0, R15: 0xffffff80008ba500
RFL: 0x0000000000000002, RIP: 0xffffff80002b3103, CS: 0x0000000000000008, SS: 0x0000000000000010
Backtrace (CPU 2), Frame : Return Address
0xffffff81c94bfce0 : 0xffffff80002c781c
0xffffff81c94bfd10 : 0xffffff80002c2790
0xffffff81c94bfd60 : 0xffffff80002d7d3f
0xffffff81c94bfe90 : 0xffffff800022a5fa
0xffffff81c94bfed0 : 0xffffff800023e75e
0xffffff81c94bff20 : 0xffffff80002b1df2
0xffffff81c94bff50 : 0xffffff80002c7859
0xffffff81c94bff80 : 0xffffff80002c2790
0xffffff81c94bffd0 : 0xffffff80002d7bd2
0xffffff81f03fbe50 : 0xffffff7f80a788d0
0xffffff81f03fbea0 : 0xffffff7f8095fcec
0xffffff81f03fbf20 : 0xffffff7f8095ffef
0xffffff81f03fbf40 : 0xffffff800063c091
0xffffff81f03fbf70 : 0xffffff800023db2c
0xffffff81f03fbfb0 : 0xffffff8000820057
      Kernel Extensions in backtrace:
         com.apple.iokit.IOUSBFamily(4.5.5)[4E51AA1E-079B-38B5-A56D-6F9D251FD7FF]@0xffff ff7f80942000->0xffffff7f80990fff
            dependency: com.apple.iokit.IOPCIFamily(2.6.7)[6D54F06A-46B7-37FC-AF22-DE68DC18A1A3]@0xffff ff7f80822000
         com.apple.driver.AppleUSBEHCI(4.5.5)[CAA2352E-D136-3656-ADF9-6BB3A42C2188]@0xff ffff7f80a73000->0xffffff7f80a89fff
            dependency: com.apple.iokit.IOUSBFamily(4.5.5)[4E51AA1E-079B-38B5-A56D-6F9D251FD7FF]@0xffff ff7f80942000
            dependency: com.apple.iokit.IOPCIFamily(2.6.7)[6D54F06A-46B7-37FC-AF22-DE68DC18A1A3]@0xffff ff7f80822000
BSD process name corresponding to current thread: kernel_task
panic(cpu 3 caller 0xffffff80002a794e): "TLB invalidation IPI timeout: " "CPU(s) failed to respond to interrupts, unresponsive CPU bitmap: 0x5, NMIPI acks: orig: 0x0, now: 0x2"@/SourceCache/xnu/xnu-1699.24.8/osfmk/x86_64/pmap.c:2225
Backtrace (CPU 3), Frame : Return Address
0xffffff81d39ab160 : 0xffffff8000220702
0xffffff81d39ab1e0 : 0xffffff80002a794e
0xffffff81d39ab250 : 0xffffff80002aa4e6
0xffffff81d39ab2e0 : 0xffffff800027f76d
0xffffff81d39ab340 : 0xffffff8000273b0d
0xffffff81d39ab430 : 0xffffff80002748aa
0xffffff81d39ab460 : 0xffffff800026e7f2
0xffffff81d39ab490 : 0xffffff80002261f2
0xffffff81d39ab4b0 : 0xffffff80004e8f9a
0xffffff81d39abb40 : 0xffffff80004e9a53
0xffffff81d39abc00 : 0xffffff80003196d2
0xffffff81d39abc70 : 0xffffff8000302ba3
0xffffff81d39abd70 : 0xffffff8000302ee0
0xffffff81d39abf50 : 0xffffff80005caa9b
0xffffff81d39abfb0 : 0xffffff80002d8363
BSD process name corresponding to current thread: mds

Since upgrading to Mavericks my Interface and hard drive are shutting down when Mac put to sleep

Similar Messages

Maybe you are looking for