Since upgrading to Mavericks my mail will only allow me to choose one recipient at a time unlike previous OSX which would allow me to choose multiple recipients at once.

Open a message-editing window and select
View ▹ Customize Toolbar...
from the menu bar. From the sheet that opens, drag the button labeled Address upward (not downward) into the toolbar if it's not already there, then click Done.
Click the button to see a list of your contacts. You can make multiple selections.

Similar Messages

Time Capsule which will only let me connect to one device at a time. Anyone else experience this?

I have a Time Capsule which I use with a Macbook Pro and an iMac, as well as my iPhone and an Airport Express. It appears as though it will currently only allow me to connect to one device at a time. I had my MBP and iMac sitting side by side and ran Aiport Utility on both. The Time Capsule would only show up on one or the other but not both. Anyone else experience this? It was working great until a day or so ago.

It sounds as if your Time Capsule is in "Bridge Mode", which would only allow one device to connect to the Internet at a time.
To check......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Internet icon
Check the setting for Connection Sharing
If it is "Off (Bridge Mode)", change it to "Share a public IP address"
Click Update to save your changes

Airport will only give a signal to one device at a time

Went to access internet from Iphone. Iphone would connect and show good signal strength but not work. Imac was working. After resetting and unplugging cables I got the Iphone to work only to turn around and find the Imac not working. It seems I can fix the problem by unplugging the cat 5 cable from router that feeds the airport. Devices continue to work unless i leave the covered area or it somehow looses its connection overnight. I cant tell if I have a bad router, airport or cable? If I plug the cable from the router directly into the computer it works as it should. Any guesses?

Please post screenshots of the setup of the Airport.
I strongly recommend you reset it to factory and start over.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
When you do the setup take particular note of the names that are recommended by the utility to use.. and DO NOT USE THEM.
Use names that are short, no spaces and pure alphanumeric .. eg AEgenx and wifi name AEwifi
Then show me in screenshots what the problem is.
I do not know the modem you use.. all I am interested in is the WAN setup so please show me that in the AE.

Can't access Time Machine files since upgrading to Mavericks

I have searched the community and found that people have experienced issues backing up to Time Machine since upgrading to Mavericks, but my problem appears slightly different from the ones I've found. I can see that my Time Machine is actually backing up since the upgrade as it was before the upgrade. The issue I'm having is that I can't access the backed-up files in any way.
When I try to open time machine it launches the "space view" with all of the historical tabs lined up for me to scroll through, but imediately closes that window and gives the error message: "Can't connect to a current Time Machine backup disc". It's so weird, because it says that there have been backups completed since the upgrade (most recently this morning). If it wasn't writing to the disc, it would have showed me an error of some sort.
What I am, specifically, trying to accomplish is that I need to restore some iTunes playlists that I somehow managed to delete this past weekend. I figured that I would easily be able to access the library file that contains the playlists from Saturday morning, when I KNOW that playlist was still there, and just restore it. Now that I am seeing that I can't access any of my time machine files, I'm realizing that I have an even bigger problem, and that all of my files are, essentially, going without backup at this time (assuming I can't access the files that have already been backing up).
If anyone has some insight as to how I can fix this problem, I would greatly appreciate it.

Hi John, (The above was for your attention) I'm 72 and must've hit the wrong button!!!
I followed your instructions to the letter, but sadly, no success...all my backups are showing on the TM external HD, but I cannot access them after instsalling 'Mavericks'
I spent the entire day on and off the phone with Applecare (they are very nice, and I'm sure they know most of the stuff needed; but not this problem. They are phoning back tomorrow as the senior chap was not available.
I love my apple products, and like you, have been using their gear for well over 25 years...not studying the things, but using them all the way through.
My present Mac, a 24" iMac is nearly 7 years old, bought on December 11th 2007, and this is the first time I have had a significant problem, and never a virus..got bless em!. I bet there are not many Windows users around who can say the same!
However, if I cannot access my backups, I'm a bit lost, as all my accumulated stuff is there!
I guess the worst case scenario is that I revert to OS X 10.7.5, and wait 'til the bugs are ironed out in Mavericks....Ho Hum
Message was edited by: briinoz

Since upgrading to Maverick I have trouble getting incoming mail?

Ever since I upgraded to Maverick my mail has not worked consistently. It has been 2 days since I've been able to get any incoming Mail. It seems to deliver when it wants and it's on strike now. Thank goodness my iphone email works. I've been to the genius bar w/o resolution (they thought it was due to gmail account which we deleted and not eliminate the problem). I can send but can't receive. It is a POP email acount. I've read other posts - shutting down the computer does not help. Any suggestions? I am fully updated. I have a iMac intel, OS X 10.9.3. Mail 7.3. Thanks!!

Hi,
Thank you for taking an interest in my problem.
What actually transpired was my Macpro (contacts) would not update after I put changes in to contacts in either iphone or ipad. Apple checked and discovered that changes made in either macPro (contacts) and contacts(cloud.com) did not talk to each other so concentrated on this.
The rep had me signout of my macpro user account, and create a temp new user to which I signed into my icloud account as normal. Then, changes in either macpro or cloud.com now worked. He then did some changes at his end and after exiting the temp user and resigning in as origal macpro user this now made changes to each other. OK. We then deleted the temp user and this worked! but since then I have discovered that iphone and ipad now do not change icloud.com contacts or calendar so would not of course change contacts on macpro!
Other services on icloud (photo stream, mail, docs and data, find my ----, etc) all function with my iphone (so have to presume my ipad also, but this is not with me at this time) so the problem is confined to just contacts and calendar.
In summary, I do have only one icloud address but which appears to have two sets of data as the devices will communicate with something but not altogether!!
I am thoroughly confused, especially as it was all fine until I upgraded from M\Lion to Mavericks on my shiny new macpro a few weeks ago. I had moved from Windows to Apple to avoid just such problems.
Not enamoured with Apple at the moment, but thank you for your assistance - hope this is a better explanation.
Kind Regards

Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display. There is only a blank space that after about 1 minute, has a small box with a question mark. How can I go back to attached images?

Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display. There is only a blank space that after about 1 minute, has a small box with a question mark. Double clicking on the box will open the image in a separate window. It's very slow and tedious for multiple images. How can I go back to attached and displayed images? If I click on "Forward", the images appear instantly in the email to be forwarded.

Scott,
My problem seemed to fix itself. Or, by shutting down the computer one night, instead of putting it to sleep, may have reset something. Since updating to Mavericks, I always (or usually) let the computer sleep overnight or anytime I'm walking away from it. A few days ago, I was updating notes for my kids about how to find all my stuff and how to turn on my computer, so I wanted to rewrite the start-up procedures for the iMac, just in case they ever need to. Well, I shut it down one night so the following morning, I could write down each step. Lo and behold, the images, etc. are all there again! Solved, but I'm not sure why.
Tom

Since upgrading from Mavericks to Yosemite Mail, Spotlight,Mission Control and App-Store don´t work correctly. Is it possible to return to Mavericks?

Since upgrading from Mavericks to Yosemite Mail, Spotlight, Mission Control and App-Store don´t work correctly. Is it possible to return to Mavericks?

If you have an external drive with an OS X Time Machine backup, then do restore of your last backup. If you have an external drive with a bootable clone of your previous system, you can boot to that clone and re-clone the OS X on your external drive back to your Mac's internal drive.
If you do not have either of these available, then the reverting/restoring process becomes much more complicated and involves purchasing an external drive and backing up your current system to that drive, then erasing, reformatting your hard drive and now your only options to installng an OS X version is doing a clean install of OS X 10.6 Snow Leopard, then upgrading, again, to either OS X 10.7 Lion or 10.8 Mountain Lion. OS X 10.9 Mavericks is no longer available for download and Apple has not made OS X 10.9 Mavericks available in any other form to be able to redownload and install.
Maybe it would be better to explain in detail your issues with Yosemite to see if any of us here can help you with your difficulties.
I am not running or using Yosemite, so I cannot help you with your Yosemite issues,
There are others here who can help you with Yosemite.
Good Luck.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Mail not receiving emails since upgrading to Maverick

I have been having nothing but issues using the Mail program since upgrading to Maverick earlier this year. I can't get my incoming emails to sync normally (I have multiple different accounts set up from different servers), sometimes they come in with no issues and other times they don't show up for hours or after I manually restart the program/computer. I know there is a huge delay because they come in on my phone and iPad without any issues. This is a huge problem for me since I use Mail for all my work emails and I can't log into all the different web applications easily. Can anyone give me any suggestions?? I've tried taking the accounts offline and then resyncing them and sometimes it works but lately it isn't doing the trick either. Here is my mail version I'm using : Version 7.3 (1878.6) and I'm in OSX 10.9.5 I haven't upgraded Yosemite because my last upgrade to Maverick was such a headache... Please help!!!

Hey there lasmith4,
I see that you are experiencing some issues with troubleshooting Mail on your Mac. Here is an article that should be able to take you through some more relevant troubleshooting steps for this issue:
OS X Mail: Troubleshooting sending and receiving email messages - Apple Support
http://support.apple.com/en-us/TS3276
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Since upgrading to Mavericks, Mail is extremely slow to load preview pane or show email when mailbox is double-clicked. Is this a known issue?

Since upgrading to Mavericks, Mail is extremely slow to load the preview pane or show email when mailbox is double-clicked. Is this a known issue? Or is there a solution to this issue?

Hi AngieLynch,
Thanks for visiting Apple Support Communities.
It sounds like you're seeing some unexpected behavior in Mail.
Before troubleshooting on your computer, I'd strongly recommend backing up your data to an external hard drive with Time Machine, if you haven't already. This article can help with setting up Time Machine:
Mac Basics: Time Machine backs up your Mac
http://support.apple.com/kb/ht1427
Next, try creating a new user account on your computer. You can add your email account to Mail in the new user account. If Mail is more responsive in the new user account, then Mavericks is working fine and the behavior is caused by conflicts in your own Mail or user account.
These articles walk you through creating a new user and setting up Mail:
OS X Mountain Lion: Create a new user account (applies to Mavericks, too.)
http://support.apple.com/kb/PH11468
Configuring Mail for your email account
http://support.apple.com/kb/HT1277
Best,
Jeremy

Since upgrading to Mavericks my iMac no longer recognizes my digital camera. iPhoto will open, but my camera never appears in the source list or goes into import mode. Help!

Since upgrading to Mavericks my iMac no longer recognizes my digital camera. iPhoto will open, but my camera never appears in the source list or goes into import mode. Help!

I found that if you open iMage Capture App that seems to trigger iPhoto to open and thew camera is connected. At least that happens with my camera. Good luck.

Just upgraded to OS X Mavericks and mail will not open

Just upgraded to OS X Mavericks and mail will not open

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Since upgrading to mavericks I cannot scroll with my mouse in mail - I have to use the keyboard arrows

since upgrading to mavericks I cannot scroll with my mouse in mail - I have to use the keyboard arrows

Hopefully this is what you are looking for:
Canon MP560 series:
Status: Idle
Print Server: Local
Driver Version: 10.84.2.0
Default: Yes
Shared: Yes
URI: usb://Canon/MP560%20series?serial=254057
PPD: Canon MP560 series
PPD File Version: 10.84.2.0
PostScript Version: (3010.000) 705
CUPS Version: 1.7.2 (cups-372.4)
Scanning support: Yes
Scanning app (bundleID path): -
Scanning app version: -
Scanner UUID: 00000000-0000-0000-0000-323534303537
Printer Commands: PrintSelfTestPage ReportLevels
CUPS filters:
Raster2CanonIJ:
Path: /Library/Printers/Canon/BJPrinter/Filters/Raster2CanonIJ/Raster2CanonIJ.bundle/ Contents/MacOS/Raster2CanonIJ
Hope

Since upgrading to v7 my email will accept in mail but will not send mail?

Since upgrading to v7 my email will accept emails, but will not send mail any suggestions?

Hello Lifechip,
Try a soft reset and troubleshoot the problem, if you do not know how to perform a soft reset click on the link below;
http://www.apple.com/support/iphone/assistant/phone/#section_1
If the problem persists, try logging out of email by going into
Settings > Mail, Contacts, Calendars > Account > Delete Account
After you have done so, click on Add Account right below the list of emails, enter all your details.
Wish you good luck,
iTechExpress

Trying to open youtube, QuickTime cannot open video.3gp, only a problem since upgrading to Mavericks

trying to open youtube, QuickTime cannot open video.3gp, only a problem since upgrading to Mavericks, what do I need to do please ?

You're right. It wasn't QuickTime itself. I solved all the problems myself.
The main reason why QuickTime files weren't working was because the newest audio driver from Creative released July 2007 (using their autoupdate) is apparently for Windows Vista (it has the name Vista in the update title). Why that update showed up on my Windows XP Pro system, I have no idea. So, I went to Creative's site and got the driver before the latest release, and all works well.
The Microsoft update (from June 2007, I noticed today, not July) is another issue. It's based around the file P17RunE.dll, which is something from Microsoft for the SoundBlaster. Not sure what it does, but I don't need it.
Sorry for wasting all your time on a non QuickTime issue, but thanks for the help.

Since upgrading to Mavericks my mail will only allow me to choose one recipient at a time unlike previous OSX which would allow me to choose multiple recipients at once.

Similar Messages

Maybe you are looking for