Since upgrading to v7 my email will accept in mail but will not send mail?

Since upgrading to v7 my email will accept emails, but will not send mail any suggestions?

Hello Lifechip,
Try a soft reset and troubleshoot the problem, if you do not know how to perform a soft reset click on the link below;
http://www.apple.com/support/iphone/assistant/phone/#section_1
If the problem persists, try logging out of email by going into
Settings > Mail, Contacts, Calendars > Account > Delete Account
After you have done so, click on Add Account right below the list of emails, enter all your details.
Wish you good luck,
iTechExpress

Similar Messages

  • Since upgrading to Lion, my HP officejet pro 7550 orubts, but will not scan

    since upgrading to Lion, my hp officejet 7550 will print fine but won't scan---any suggestions?? I downloaded the drisavers from Apploe,but that didn't solve the issue.

    Hi @Southglen,
    Welcome to the HP Forums!
    I noticed that your HP Officejet Pro 8600 Plus printer will not recognize your wireless router password. I am sorry to hear this, but happy to help!
    I would recommend to go through this guide, How to Find the WEP or WPA Key or Password for Your Wireless Network, just to double-check your wireless password, in case it might have changed.
    I would also suggest a hard reset, by going to this post How to perform a Hard Reset, by @Rich1.
    After those two steps, I would suggest a firmware update, Getting Printer Updates for HP Officejet Pro 8600 (N911), Officejet 6600 (H711) and Officejet 6700 P....
    Let's start with these steps, and we will go from there!     
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Since upgrading to mavericks, my email autofill is incorrect and I can't figure out how to fix it.

    Since upgrading to mavericks, my email autofill in Safari is incorrect and I can't figure out how to change it.  I start typing my email [email protected] on a website and that I need to put my email in (like to request a newsletter etc).  As soon as I get to the @ it fills it in as [email protected]@.  It is baffling and frustrating. Any ideas?  Autofill in general, for all my info (adress etc) works fine.

    Hi srd9196,
    Thanks for using Apple Support Communities.  I would check for a substitution being set in System Preferences -> Keyboard -> Text:
    OS X Mavericks: Text pane of Keyboard preferences
    http://support.apple.com/kb/PH14226
    Cheers,
    - Ari

  • Since upgrading to Yosemite, when I hit either apostrophe or quotation key in Apple Mail , that starts new paragraph

    Since upgrading to Yosemite, when I hit either apostrophe or quotation key in Apple Mail, that starts new paragraph like I am hitting the return/enter key right next to the key I am hitting.
    I've eliminated the possibility that I suffer from fat finger syndrome by ruling out the issue in other apps like Pages/Word (apostrophe/quotation works fine).  This is only happening in Apple Mail.  Example: [ Can't ] appears as [ Can' ] with [ t ] as the start of a new paragraph.  I use an Apple wireless keyboard, so I also tried using an Apple keyboard connected by USB port.  Still have the same issue in Apple Mail, but not in other apps.
    Any idea what this is?

    Update.
    This only happens when I am typing above my signature information or replying to an email when the body of the email I am responding to included.  Does not happen when I am typing a blank email.
    Thanks,

  • My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet.

    My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet. I tried to repair connection, tried to reboot modem several times, I even updated my computer. Nothing. All it says is that it does not detect modem. Why?

    Welcome to the support community group.
    First, are you sure that your AirPort Extreme has been configured correctly and is properly connected to your modem?
    Begin by telling us how you have things connected and if the Airport Extreme is replacing a previously owned router or is this an entirely new installation?
    First be sure that your modem is working and properly connects you to the internet using an ethernet cable directly connected to your laptop.  Once you're sure that's working, reset the AirPort to factory defaults by disconnecting it from power and pressing and holding in the small reset button on the back  for 15 - 20 seconds while you reconnect it to power.  Then turn everything off for 5 minutes. Connect the Airport to your modem with and ethernet cable to the Airport WAN port on the back (check the user guide to make sure you connect the cable to the correct port) then connect a second ethernet cable between the laptop and one of the LAN ports on the AirPort Extreme.
    Then power up the modem first, wait 5 minutes and then power up the Airport, wait 5 minutes and finally power up your laptop.
    Then run the airport configuration utility from your laptop.  Since you're not using an Apple computer, be sure that all of your firewall, and virus blocking and checking software is disabled before you run the airport configuration utility.  Once you run the utility, it should detect your AirPort and allow you to use the configuration wizard to set things up.
    Check back if you're still having problems.

  • ALERT---ALERT since upgrading to last version 1/2 hour ago I can NOT send mail-ALERT ---

    HI,
    I upgraded to the latest version half an hour ago. My TB is in French. Since then I can NOT send mail. A window appears with the mention " adjunction of // ajonction de" and the blue bar keeps going up to 10 minute. After 10 min i decided to abort, restart TB, make another testmail but same problem.
    Please act quickly

    Hello,
    Certain Thunderbird problems can be solved by peforming a ''Clean Reinstall''. This means you remove Thunderbird's Program Files then reinstall Thunderbird. Please follow these steps:
    #Download the latest version of Thunderbird from http://www.mozilla.org/en-US/thunderbird/ and save the setup file to your computer.
    #After the download is complete, close all Thunderbird windows (Click Exit/Quit from the menu button on the right).
    #*'''Windows:'''
    #** C:\Program Files\Mozilla Thunderbird\
    #** C:\Program Files (x86)\Mozilla Thunderbird\
    #*'''Mac:''' Delete Thunderbird from the Applications folder.
    #*'''Linux:''' If you installed Thunderbird with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Thunderbird on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/en-US/thunderbird/ Thunderbird Download Page], simply remove the folder ''thunderbird'' in your home directory.
    #Now, go ahead and reinstall Thunderbird:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to open Thunderbird after clicking the Finish button.
    <b>WARNING:</b> Do not run Thunderbird's uninstaller or use a third party remover as part of this process, because that could permanently delete your Thunderbird data, including but not limited to, extensions,emails, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
    Please report back to see if this helped you!
    Thank you.

  • My ipad receives email with the hotel wifi but will not send.  The error message is "user name or password for ........is incorrect" but both are correct and unchanged.  Restarting iPad didnt help.

    My iPad receives email on the hotel wifi but will not send.  The error message reads "user name or password for smpt......is incorrect" but both are correct and unchanged.  Restarting iPad did not help.

    I did try this too, but when I access my webmail on the iPad, the iPad doesn't allow me to type my message.  I am able to enter in the "to" address and the "subject" line, but then the keyboard will not come up for me to type my message.  Is there some trick to this?  Very frustrating!

  • One of four email accts will not send mail

    I have a Z. Tablet. I set up four of our business email accts and all will receive mail but one will not send mail. Tried many combinations of smtp addresses but no joy. Consulted my email provider tech guys. They set up using same on another android device and worked for them. They have given up on solving this. It just happens this is the most important mailbox. Anyone offer help to solve?

    What if you use a different email app? perhaps Moxier, K9, Maildroid?
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Calls have been dropping out mid-call (after initially working) with full reception since upgrading my iPhone 4 to iOS5 (can hear them but they can't hear me).

    Calls have been dropping out mid-call (after initially working) with full reception since upgrading my iPhone 4 to iOS5 (can hear them but they can't hear me). The call initially works but then after a minute or so, they stop hearing me, even though I can hear them. Sometimes it goes the other way and I can't hear them.
    Please advise how to remedy ASAP.

    PS: I have had full reception bars when this has occured on a 3G network in Sydney, Australia (3 Mobile).

  • Mail app won't send mail, but it will receive mail

    The mail app on my macbook pro and iphone will not send mail, but they can recieve mail.  I deleted both accounts and reloaded them and they still won't work.  After that I ran repair permissions and it found nothing wrong.  Has anyone experienced this problem and how can I fix this?

    I had same problem with my MBA and Mac Desktop (don't have iPhone)...could receive but not send emails after Lion upgrade.  I only experienced it at home versus at work (inconsistently on both on my macbook air and my desktop mac).
    For me the solution was when you compose an email there are two dropdown listboxes next to From:  ...in the second one select smtp.me.com:yourusername   Until Apple makes a change you might need to do that each time you send or reply to a message.
    I think it has something to do with if you don't do that then port 25 might get used which can be blocked by a lot of ISPs.
    Apple support helped me solve this problem and said it was a known issue they are working on.
    Hope this helps with your issue!

  • Email not send mail using yahoo

    my mail will recieve messages from yahoo mail but won't send.
    i have SSL on both my incoming and outgoing mail.
    my SSL for incoming is 995
    and for out going is 465
    both with the correct password and username.
    i am running mac osx 10.5.4

    Sorry to have to be gone most of the day.
    You are saying that with the Activity monitor, it never connects, and never enters the transmitting phase?
    Do you have an email account with your ISP or is this Yahoo what is provided by your ISP?
    In Leopard, with some connections, there can be an issue not experienced in Tiger. I had this issue, but it only slowed sending and not completely cut it off. I will paste in what I and others have done to work around the issue:
    I have experienced the same behavior. For me it is corrected by entering a primary and secondary DNS address in the modem. I think this behavior differs for some people, and must be related to interaction with specific ISPs. Since I don't have Leopard on a laptop, I have not tested in remote venues.
    I changed my Modem to have dedicated DNS address. It may be possible to do in the router, instead, but I did mine in the Modem. How that is done will likely depend on the brand of modem. You will likely need to query your ISP to get the server DNS number -- if so, they would be able to guide the change in the modem.
    For me, it could be done in the Setup/DHCP dialogue with the modem, via browser. I have no confirmation of this resolving not sending, but suspect sluggish connection to the SMTP could lead to time outs and total failure to send.
    Ernie

  • My gmail account receives mail, but will not send, forward, or reply...it gets stuck in the spin and then I have to force quick firefox.

    My gmail accounts receives mail, but will not send, reply or forward. Also cannot open settings. It gets stuck in spin mode.
    I worked with an apple tech, tried several things, and then she suggested I contact Mozilla support.

    Hey Butterworth,
    You may need to use the information in this article to help you troubleshoot the issue with your outgoing server:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • IPod Touch 4 will not send mail (Comcast POP account)

    I'm having an issue sending mail (Comcast) in a new iPod Touch. I sync'd it with iTunes and the mail settings are configured exactly as my iPhone (which works sending & receiving). The iPod will receive mail but will not send. It's also able to get online through our wireless network at home.
    The only thing I can think of is that it required me to update iTunes to 10.1 (from 10) before it would even be recognized in iTunes. I haven't sync'd my iPhone to the updated iTunes and really am afraid to, if that's what's causing the issue.
    Here is the message:
    "Canot send Mail"
    The connection to the outgoing server "smtp.comcast.net" failed. Additional outgoing mail servers can be configured in settings...."
    I can't understand why the iPod's mail settings would be configured any different than the other 4 macs and 1 iPhone in our household.
    Any ideas?

    Thanks for your help. After further trouble shooting I found that the iPod was conflicting with other outgoing mail servers that were listed as "Other SMTP Servers" in the mail settings. I deleted them and kept only the one that is used for this one email account.
    "Authentication" continues to change from "password" to "MD5 Challenge-Response" on it's own. I don't know what that is, so I'll need to check into it to make sure it isn't an issue.

  • Mail will not send mail, only receive.

    I have spent the majority of today re-installing OS X and all necessary updates, music, data after the death of a hard drive. Luckily everything went perfectly, except for the same problem I had with Mail even before the 1st hard drive died. Mail will not send mail, only receive.
    All efforts time out and give me this message: "The connection to the server mail.earthlink.net on port 25 timed out"
    Mail used to send messages, but stopped suddenly in 2004 and has yet to start again. Any idea guys?! I can't figure it out, under Account settings I have necessary fields filled in: Outgoing Mail Server (SMTP) is set to "mail.earthlink.net", Server Port is set to 25, and Authentication drop menu is set to None.
    Any help would be greatly appreciated.
    --DANIEL

    This is NOT a problem with Mail or OS X. This is an incorrect settings problem - garbage in = garbage out and this information is certainly available at Earthlink's website and Earthlink also provides technical support.
    Earthlink has an authenticated SMTP server they changed to long ago.
    SMTP Server: smtpauth.earthlink.net
    Server Port: 587 but 25 should work if you are using Earthlink as your internet service provider for connecting to the internet.
    Use SSL: Off or not selected.
    Authentication: MD5 Challenge-Response
    User Name: Your ENTIRE Earthlink email address.
    Password: The account's password - the same password used to check the incoming mail server for new messages.

  • When I set up my mail I could send emails now a day later I can not send them but can still receive them ... I can't see what is wrong .. Any answers .

    When I set up my mail I could send emails now a day later I can not send them but can still receive them ... I can't see what is wrong .. Any answers .

    It's not a good idea to use a network disk for both Time Machine backups and other things.  By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files.  I'd store those other files on an external disk connected to the Time Capsule.  The problem with that is that Time Machine will only back up files that are local to your Mac.  That means that you'll only have one copy of the files on or attached to your Time Capsule.
    By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject.  In the future just type a short summary of your post into that field and type the whole message into the field below that.

Maybe you are looking for

  • I need to locate my external hard drive

    For days I have been trying to find my external hard drive on my new mac!!!! Why is this so hard? I really need documents off of my hard drive by tonight!!!!!!!

  • Error while executing Form 16-SAP HR

    hi All, we ahve done upgradation from 4.7 to ecc 6. We are getting the following error, in 4.7 we use to execute form 16 but after upgradation we are getting the following error it shows the status message as mentioned below. The FORM 16 is not gener

  • Just a heads up

    This morning I received a text that said the following: "Your account verizon has been disabled by reasons of security enter link and confirm your data" followed by a link that I will not put here. Now most of us, especially if you're an online gamer

  • Not able to terminate an Emp, Error: The person must exist as an employee at the time specified by Date Start

    HI Guru's We are sourcing Employee records from upstream system and the Effective_start_date for particular record of Employee is getting changed, consider a below scenario. EXISTING RECORD. Person_id, effective_start_date,Effective_end_date, person_

  • BEX ANALYZER 7.0 - not work

    hi, when i open 7.X analyzer, excel is opened, but buttons not work. I have win xp and SAP gui 6.40 with the latest patches. Have you any idea how to solve this problem, thanks for reply