Since upgrading to ver 8 headers and footers on printing web pages do not print; typing response is terrible, type 20-30 char before seeing them; my PC or Firefox 8?

If I do an end task on plugin_container using Windows task manager, the typing response problem seems to go away temporarily. However, the plugin_container process soon restarts itself and the typing issue returns. It has happened four or five times while typing this note. Sometimes I start typing and the display of characters typed does not appear or while typing an displaying what is typed normally all of a sudden stops being displayed and eventually is displayed all in a blast of characters.
When I try to print a web page, the header and footer info that I have selected show in the print preview but disappears when I print the page and does not print on the hard copy.
I believe that both of the above situations began when I upgraded to Firefox version 8.
I tried to search for problems like the above with Firefox but could find nothing.
I tried all of the above in IE and IE works as it has in the past.
Is this a Firefox issue with version 8 or is there something wrong with my PC all of a sudden?

Response to cor-el suggestions:
I tried what you suggested as far as checking the theme (it's "Default 8.0") and deleting the sessionstore files (there was one .js file, one -1.js file and one .bak file). I still have the same slow response problems (especially typing, it has gone dead on me for a short time twice while typing this replay so far, now a third time) and lost of headers and trailers and some data.
I did the suggested actions three times just to make sure that I was doing them correctly. On the first try, the sessionstore.js and sessionstore-1.js was more than twice the size of sessionstore.bak. Since doing what was suggested, the sessionstore.js and sessionstore.bak are, I believe, the same size. I did not write down their size is why I am not certain.
The printing problem appears to only be with one website which is an investment website which I would prefer not to document here. I print from this website each weekday and I have confirmed that the printing problem started when the upgrade to version 8.0 occurred.
I need a solution to this or I am going to either go back to IE (Ugh!) or find another browser. The typing delays are an extreme annoyance since I do lots on the Internet including a lot of emailing. The delays also involve the buttons to select functions within a website.
Is there a way to get back to the version previous to version 8.0?

Similar Messages

Ftting headers and footers to a pdf page

Hi All, I want to add headers and footers to the pdf pages ,but the problem is the page content spans all accross the page due to which headers will be over writing the content of the pdf page. Is there any way to compress the content of the page so that i can fit in the headers and footers correctly?

In Acrobat Pro you can increase the page size with the crop tool.

Clear cached web content does not always clear to 0kb, only since upgrading to vers.14, and now 15

Cache would always clear to 0kb before, now it does or not depending
on which websites are visited. What has been changed?

Are all tabs closed when you try to clear the cache?<br />
Firefox may be keeping the thumbnails from the about:newtab page that are currently stored in the cache.

I cannot print web pages. Tried printing with IE and it worked, so this is Firefox-specific. I will have to stop using it unless someone can help me figure out why it won't let me print a web page. Help! Don't want to go back to IE!

Can't print from Firefox. ONLY Firefox, and only since downloading v.4. Can I get back to V. 3? Kind of reminds me of when Windows XP "advanced" to Vista.

Try to create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Common headers and footers in web applications

I want to include common headers and footers in all web applications. I do not want to include the header/footer in each application WAR file. I've tried to follow Orion's tutorial for building a response filter, and I get it working to the point that the header and footer show up on the page, but no other content shows up.
Has anyone used filters to include static headers and footers in web applications?
And is there an easier way to do this, that I'm not seeing??

Hi Anu,
I have already gone through the document. In that i dint find anything related to headers and footers.Only thing that is available is sorting the dimension headers.
Please let me know if you have any other info regarding this.
Thanks & Regards
Ambica Atluri

I need to print web generated pages for report cards, etc. How can I turn off headers and footers when printing? (Mac OS X 10.8)

By "headers and footers" I mean the url that gets printed at the top/bottom of the page.

You can do that from
'''Firefox Menu''' > '''Print Setup''' (Press the right arrow button in the right end of print option) > '''Print setup''' > '''Margin & Header/Footer''' tab
In Header/ Footer section select '''--blank--- for ''' from drop down for everything or which ever you don't want

When upgrading from Abobe Acrobat Pro 9 to XI, is it possible to save Headers and Footers in documents?

I support a law firm that users headers and footers in their documents. They are upgrading from Adobe Acrobat Pro 9 to XI. when they did an install on one PC, the headers and footers in a PDF did not show and had to be recreated. Is there a way around that? I's appreciate any input.
Thanks!
Ed

This is a work around. Bring the pdf into Illustrator. Go to Select >Object>Text. In the attributes panel, deselect Overprint. In the Transparency panel, select Knockout Group. In the Appearance panel, check to make sure the black is not overprinting by clicking on the Character entry. If not, try clicking "Clear Appearance" (here I got a little lost.
Resave the pdf file. Your black text should now knock out. You may have to retrap, unless your RIP does that for you.
Hope this helps. (I had to keep trying to get it to work, but I finally did.
Greg Ledger
www.macproductionartist.wordpress.com

Since upgrading to ver 12 from 9.01 It takes between 15-30 minutes to startup then anything I click just has the spinning wheel ie wait. Both Ie and Chrome work

I had no issues with Ver 9.01 but since upgrading to Ver 12 it takes forever to startup but is unusable when it finally comes up. Any ideas why and how do I fix it. IE 9 and Chrome have no issues.

Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works fine in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.
A few other basic trouble shooting things you can try is this:
Run all Windows Updates, install all needed service packs, etc.
Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. You can uninstall this program after you clean off any infections.

In Pages, How can I get headers and footers to show up on more than the first page of each section?

In Mountain Lion, I considered myself a fairly expert user of Pages. Since "upgrading" to Mavericks, I can't get even basic things to work anymore. My current problem is that the headers and footers are only showing up on the first page of each section. A related annoyance is that if I copy the information in a header or footer, all the associated formatting disappears when I paste it. But the first problem is the one that matters — headers and footers that only show up on one page sort of negate the whole point of headers and footers.

If you click the link I posted previously, it takes you right to the Pages community.
Here > Pages: iWork: Apple Support Communities
Then click New.

When I print a web page, how do I adjust the printe margins so that the headers and footers don't fall off the page?

I have looked for a way to adjust the page margins for printing, but can't find it. I have found where to adjust what prints in the header and the footer. When I print, the headers and footers are so close to the edge, and sometimes half off the page edge at the top and the bottom, that I can't really read them. This didn't happen in the past. Maybe this has changed since the last update - I'm not sure. Is there a way that I can fix this, so that my headers and footers are readable?
Thanks.

Someone else reported this sound last September, but there wasn't any resolution to that thread: [https://support.mozilla.org/en-US/questions/938003 After upgrading to Snow Leopard on my Mac, Firefox makes typewriter or paper crinkling sounds when going to links and sites].
Does it seem to be at all related to whether pages use Flash? Just wondering whether it is some kind of notification sound related to Flash's capabilities of using the webcam and microphone.

How do I get headers and footers to print?

A few months ago, I upgraded from OSX Lion to OSX Mavericks.
I just converted a Numbers sheet to the new version of Numbers in Mavericks.
When I prepare to print the sheet, I can see a header (containing date and title) and a footer (containing page number and count) on every page. To be clear, these are repeating lines at the top and bottom of each page - they are not rows within the table.
When I print the sheet, none of these lines appear. What do I have to do to get them to print? I solved this problem for other sheets (several months ago) by calling Apple Care. Now, my Apple Cae has expired, Help is useless and I forget what I did before.
Can someone tell me what the magic setting is wuthn Numbers?
Thanks

Hey theoqaat,
Thanks for the question. After reviewing your post, it sounds like the headers and footers are not printing. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Numbers for Mac: Using headers and footers for printing
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Crystal Reports 2008 Missing Page Headers and Footers when Exporting Excel

After upgrading from Crystal Reports 9 to Crystal Reports 2008 we have noticed that when we export to Excel the document no longer retains the page headers and footers. After doing some reading I see that there is a property called ExportPageHeadersAndFooters that we can tap into. However, I am unable to get this to work for me. Below is my code, do you have any suggestions?
                ReportDocument rdReport = new ReportDocument();
                rdReport.Load(sReportFilePath);
                ExportFormatType exType = ExportFormatType.Excel;
                // create an instance of excel formatting options
                ExcelFormatOptions foFormat = new ExcelFormatOptions();
                foFormat.UsePageRange = false;
                foFormat.ExcelUseConstantColumnWidth = true;
                foFormat.ExcelTabHasColumnHeadings = true;
                foFormat.ExportPageBreaksForEachPage = true;
                foFormat.ExportPageHeadersAndFooters = ExportPageAreaKind.OnEachPage;
                // set up more exporting options
                rdReport.ExportOptions.ExportFormatType = ExportFormatType.Excel;
                rdReport.ExportOptions.ExportDestinationType = ExportDestinationType.DiskFile;
                rdReport.ExportOptions.FormatOptions = foFormat;
                rdReport.ExportToStream(exType);

I was able to get it to work but I had to do this.
ExportRequestContext expReqCntxt = new ExportRequestContext();
expReqCntxt.ExportInfo = rdReport.ExportOptions;
sExported = ((CrystalDecisions.CrystalReports.Engine.ReportDocument)rdReport).FormatEngine.ExportToStream(expReqCntxt);

Can you resize the headers and footers thats located in the page setup? Is there any possible way...or is it set that small by default?

No biggy if the answer is no. I just would like the printer's headers and footers the same size as my Internet Explorer 8 thats all.

Hi Again Bob.
It looks like I am going to be upgrading hardware and software to CS5 after all (With an extra headache of Q2ID). Just before I do so I was wondering if you could point me in the right direction...
Is it possible that Amazon might stock legitimate versions of CS4? i.e: http://www.amazon.co.uk/Adobe-CS4-Design-Premium-Mac/dp/B001UV3T4W/ref=pd_rhf_p_t_1
Or could one download a trial of CS4 and purchase after the 30 days? (no idea where a trial would come from either)
I can't seem to get any information on CS4 at the moment, and would rather not purchase illegitimate software!
Thanks for your help
Lawrence

Since upgrading to ver 3.6.13 FF not closing!

Hi Folks,
Since upgrading to ver. 3.6.13 FF won't close unless I do so through Task Manager|Processes.
I haven't installed any new Add-ons, Themes or Extensions. Just allowed Add-ons and/or Extensions to upgrade.
BTW, I've been using FF for several now and have upgraded every time the new versions have come out (and '''ONLY'''' from the FF site!!).
Any ideas???
Many thanks in advance..

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

How to remove remove page headers and footers

Hello
I can't seem to remove headers and footers from my sheet in print view. I am trying to print a chart and the header and footer are eating up valuable real estate! When using 'Pages' I can simply turn them off, where is the equivalent setting in 'Numbers'.
Any help would be much appreciated.
Thanks

Is it really useful to respond to a ridiculous rant ?
We may perfectly define zero margins.
What can't be done is to completely get rid of Headers and Footers as we may do in Pages.
When we enter zero in the Header and Footer fields, we are defining the offset of the item to the top/bottom of the printable area. We don't set the item's height to zero.
A workaround allowing us to get quite zero margins in Pages :
Put the cursor in a header.
Define the font size to 1.
Put the cursor in a footer.
Define the font size to 1.
doesn't apply to Numbers.
If we set the font size to 20, the header height become greater, if we set it to less than 10, the application set the item's height to 10 points.
From my point of view, it's clearly a bug (already reported) but I don't know any application with no bug.
So, if Mr MayBeDay is able to create an application without bugs, he may send a curriculum vitae to Apple which will certainly be glad to sign him.
Yvan KOENIG (VALLAURIS, France) mercredi 5 janvier 2011 13:44:09

Since upgrading to ver 8 headers and footers on printing web pages do not print; typing response is terrible, type 20-30 char before seeing them; my PC or Firefox 8?

Similar Messages

Maybe you are looking for