Since upgrading to version 11, I am unable to paste a signature image -- being forced to use a digital signature.

I would like to be able to place a signature image, as I did in previous versions. It seems as if I am being forced to use a digital signature, which the other side is not prepared to accept.

Hey there Jantje1,
It sounds like you are unable to launch iTunes and get an error message instead. I would try the troubleshooting outlined in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
If it comes down to uninstalling, then re installing iTunes altogether, use this link to download the 64 bit version of iTunes directly.
iTunes 11.1.3 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Thank you for using Apple Support Communities.
Take care,
Sterling

Similar Messages

Since upgrading to version 10, I am unable to use the Amazon Cloud Reader. Any ideas?

It worked prior to the upgrade and it works fine with Chrome.

Maybe they are not support beta version of Firefox, can you try with Firefox 9?
* getfirefox.com

Iphone and 3 ipods not registering with iTunes since upgrading to version 10.4!

Good day and thanks for your help. AppleCare has been unable to solve or identify my problem. Since upgrading to version 10.4 I am unable to have my iphone or ipods be recognized in iTunes. I have deleted and reloaded iTunes four times, as instructed by my AppleCare tech. I still cannot see any devices in iTunes. I am running a Dell Latitude D620 with XP, Service Pack 3. My device manager shows all USB ports are active and working properly. I have tried multiple Apple sync cables. My phone and cable work fine on my wife's laptop, so I do not believe it is a hardware issue with the cable or phone.
I heard a rumor that I need USB 2.0 ports for version 10.4. I believe my ports are version 1. Is this true? If so, how can I find and reinstall iTunes version 10.3.
Thank you for your time and assistance. I am extremely frustrated by this process!

Hi robert2232!
I have a couple of articles here that can help you with troubleshooting this issue:
Mac OS X: Resetting the SyncServices folder
http://support.apple.com/kb/TS1627
If the issue is still appearing after following the suggested steps in that article, then you will want to see this article for some further troubleshooting steps:
Sync Services: Advanced troubleshooting for contact and calendar syncing
http://support.apple.com/kb/ts2481
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Since upgrading to CFB 3, I am unable to view "ColdFusion Documentation" (Help). How do I restore this functionality?

Since upgrading to CFB 3, I am unable to view "ColdFusion Documentation" (Help). How do I restore this functionality?

I found a workaround.
Close Builder
Navigate to:
/Applications/ColdfusionBuilder3/plugins/com.adobe.coldfusion.help_3.0.0/toc.xml
Copy it to
tocOrig.xml
Edit:
/Applications/ColdfusionBuilder3/plugins/com.adobe.coldfusion.help_3.0.0/toc.xml
<?xml version="1.0" encoding="UTF-8"?><toc label="Adobe ColdFusion Documentation">
   <topic label="Configuring and Administering ColdFusion" href="docs/Configuring+and+Administering+ColdFusion.html"/>
   <topic label="CFML Reference" href="docs/Adobe+ColdFusion+CFML+Reference.html"/>
   <topic label="Developing Applications with ColdFusion" href="docs/Developing+Adobe+ColdFusion+Applications.html"/>
   <topic label="Installing And Using ColdFusion" href="docs/Installing+Adobe+ColdFusion.html"/>
</toc>
Change to:
<?xml version="1.0" encoding="UTF-8"?><toc label="Adobe ColdFusion Documentation">
   <topic label="Configuring and Administering ColdFusion" href="docs/Configuring_and_Administering_ColdFusion.html"/>
   <topic label="CFML Reference" href="docs/Adobe_ColdFusion_Reference.html"/>
   <topic label="Developing Applications with ColdFusion" href="docs/Developing_Adobe_ColdFusion_Applications.html"/>
   <topic label="Installing And Using ColdFusion" href="docs/Installing_Adobe_ColdFusion.html"/>
</toc>
Next go to folder:
/Applications/ColdfusionBuilder3/plugins/com.adobe.coldfusion.help_3.0.0/docs
1. Copy
Adobe+Coldfusion+CFML_Reference.html
and rename the copy to
Adobe_Coldfusion_Reference.html
2. Copy Configuring+and+Administering+ColdFusion.html
and rename the copy to
Configuring_and_Administering_ColdFusion.html
3. Copy
Developing+Adobe+ColdFusion+Applications.html
and rename the copy to
Developing_Adobe_ColdFusion_Applications.html
4. Copy
Installing+Adobe+ColdFusion.html
and rename the copy to
Installing_Adobe_ColdFusion.html
e.g. I took the '+' out of the file name and inserted a '_'
NOTE: this worked for all but
Adobe+ColdFusion+CFML+Reference.html
It did not work with:
Adobe_ColdFusion_CFML_Reference.html
but renaming it to this worked:
Adobe_ColdFusion_Reference.html
I don't know why.
You must restart Builder for it to take effect.

Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports. Any su

Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports. Any suggestions?
MacBook Air, OS X Mountain Lion (10.9.1)

Obviously, syncing an iOS device with iTunes over USB is still supported in Mavericks. Calendar and contact syncing with iTunes is no longer supported. That has nothing to do with your problem.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Since upgrading to version 10.8.2 my MacBook Pro won't wake from sleep is her anyway I can fix this?

Since upgrading to version 10.8.2 my MacBook Pro (late 2009) won't wake from sleep is her anyway I can fix this?

> during the entirety of this process the cursor was a "busy" pinwheel/beach ball/whathaveyou for a solid 30 minutes before I turned the computer off with the power button.
All that cursor means is that it is busy trying to do something. You can see if force quitting solves the problem with a simple force quit using command-option-escape. If you are having issues with iCal quitting, sometimes it doesn't always know whether or not it is properly communicating with a particular calendar. This can be a Mobileme issue, or even a phone synchronization issue, or a network issue reaching a shared calendar. Shutting down a machine directly from a cursor is the last step one should try, only after all others have failed. If you have done this in the past, lurking corruption can get worse each time with the directory, and upgrading the system will only enhance any corruption already present. When you restart your Mac, does everything appear to be normal?

Since upgrading to version 8.02 my iPad2 Safari does not work properly.please help

Since I upgraded to version 8.02 on my iPad2 Safari and Google Chrome do not work beyond displaying a series of websites.
When I want to enter a website they do not respond .
Can anyone tell me what I can do about this?

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost)
Settings>General>Reset>Erase all content and settings

Since upgrading to version 4.3.5 FaceTime sometime won't receive calls

Ever since I've upgraded to version 4.3.5 FaceTime sometimes won't receive a call. Sometimes it will, and I can hear ipad2 ring. I can make outgoing calls, and the other person can hear and receive my call. I also had a issue with an alarm clock app (alarm sometimes won't sound off). Everything else works fine. I've tried setting airplane mode to on, and setting FaceTime to off, shutdown to reboot. Then power up, set airplance mode back to off, and FaceTime back on. Was able to hear receiving call. After that couldn't hear the next incoming call. Is this a software issue? How could this be resolved?

I have the same problem on an iPhone 4 with 4.3.5 update.

Since upgrading to version 8.1, iTunes "can't find original music files".

I've been building an extensive music file since the first iPod. It's about 110 GB large and for about three years I've stored it on an external drive with absolutely no problems. Now, within hours of upgrading to iTunes 8.1, every listed item on my iTunes library has an exclamation mark next to it and the message *"The song "whatever" could not be used because the original file could not be found. Would you like to locate it?"* Of course I can show iTunes where the song is and then it will play it but I'm not gonna do that for 110 GB's worth of music! And yes, I've gone into iTunes preferences and told it again and again where the iTunes library is located but that doesn't work. Does anyone have a fix for this? And oh by the way, I will NEVER AGAIN let Software Update sway me into upgrading to a new version of iTunes until it's been up and running without bugs for at least three months!

Have you tried, importing the music into iTunes again? So delete the music from iTunes only not the system, & then import to see if it finds your musics?

My itunes store won't work since upgrade to version 8.0

My itunes store will not work since I upgraded to v8 I don't know what the problem is. Can someone please help me!!

The #1 culprit for that is Norton security software.
Here are Norton directions
http://service1.symantec.com/SUPPORT/nip.nsf/0/7fb6e478e2a1abf78825708b00558625? OpenDocument&seg=hm&lg=en&ct=us
If you don't have Norton, check whatever other firewall/security software you are using.

Walt Disney World advance dinner reservations look-up feature doesn't work anymore since upgrading to version 5.0 with security update.

There is a feature on the Walt Disney World website to search for available times at restaurants. The information can be entered but after clicking on "Search for a table" the website never returns any information.

Agent wrote:
I discovered the problem that the upper top right button (usually used to mute) does not send my device to standby anymore when being pressed longer than 3 seconds.
Together with this problem I discovered something that is also working different than before.
When I press the keyboard lock button (upper top left button) the lock now gets activated directly and
the screen turns black. Before this update took place the owner details were showing up when pressing this button and the screen turns dark after the defined time to go off.
The owner details are added correctly and show up when going to properties-owner.
This is working as designed with the new upgraded operating system you installed. There is not an option to change it back, only to downgrade your operating system back to the version you had installed previously.
If you want to lock the screen, you will need to set a password on the device.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Daughter's Music in My itunes since upgrading to Version 11

Since downloading the new (and not so hot) version 11 of iTunes, my daughter’s music is integrated with my music. Home sharing is off. We have different accounts and she uses her own computer/iphone/ipad - but she uses my credit card info. How do I get her music out of my account? This is very frustrating because I’d like to sync my iphone but fear her songs will end up on my iphone.

Thanks, edenagain. That worked!
I wonder, since both my daughter and I have music in the "cloud," why only her disappears after clicking "Hide music in the cloud?"

HP Prime Virtual Calculator missing mfc120u.dll error since upgrade to version 1.21.8151.102

The HP Prime virtual calculator will not start since the most recent update (version 1.21.8151.102). A windows system error popup window comes up when attempting to start the virt calc saying "The program can't start because mfc120u.dll is missing from your computer. Try reinstalling the program to fix this problem." Needless to say "re-installing" did not fix the problem. From searches it appears the specified DLL is associated with debug builds so wondering if the latest version was built incorrectly?? Anyone else having this problem? Any solution from HP? I have had to revert to my "shipped" version which is sub-optimal. There has been no problem so far with my actual HP Prime device since the latest firmware update so phew... but the virtual calc is handy when working on the PC with code. I am running 64bit windows 7 -- all latest updates applied from MS etc. had no problems until this version of the vCalc

One possible scenario: On installation, the 64 bit OS is recognised and the 64 bit version of the redistributable is installed.The emulator is probably a 32 bit version (compatibility, 32 bit programs usually work on 64 bit systems but not vice versa).It looks for the 32 bit version of the redistributable which isn't installed. Note, this is one of many possibilities in todays software world. However, the fact that 32 bit programs require the 32 bit redistributable and 64 bit programs require the 64 bit redistributable is why I suggested to install both versions. This is not only useful for HP's emulators, but many other programs (hence I have so many installed already). Best regards.

Since upgrading to version 6 why can't I get on the internet

I upgrade last week on Tuesday the 24/9 my Apple TV from then kept losing the network connection, a fees days of this and then it stopped picking up any network even if I try to enter manual it doesn't find a network. I have restored twice via my computer , I can use it by Ethernet but not wifi. This is so frustrating

Obvious? How is a hardware issue obvious? Unless something physically went bad in the unit it's not a hardware issue. It's obviously an issue related to the software update (Version 6.0 and as of this morning I believe 6.1) that has cause mass problems for users. These problems have ranged from inability to connect to airplay, all the way to bricking the unit completely. What GeoffBeeby and myself are looking for is a resolution, not someone to tell us that the obvious issue is something that would be a statistical anomaly.

I-Photo Won't Open (since upgraded to version 6)

Since I bought iLife '06, whenever I try to open iPhoto the only thing I get is it's menu, but not the main window. Intuitively I clicked on "About i-Photo" and got the "unexpected quit" message, and then chose "relounch", only to get the same situation. This time I chose "try again" on the unexpected quit window, and then - and only then - the application opend for real, with all my photos, albuns, etc…
Ever since it first happened I have been performing this very annoing "3 part lounching" of the application, and almost every time it asks me to "rebuild the cache".
On top of all that, when I quit the application I get a message saying "new settings were made for this application. Use the new ones or remain with the original settings?" - although it makes no difference whatsoever, because whenever I try to launch the application I'm back to square one!
Is anyone else experiencing this? Is there a way around it?

Bruno,
First create a new user and see if the new user can open iPhoto fine.
If the new user can, then there is something amiss with your users files.
You can also Option launch iPhoto with the Option key held down until you get a message window. In that window choose to create a new library, name it, and see if the new library will open the iPhoto window for you.
If not, Close iPhoto and option launch again, this time choosing to open another library, then navigate to your original library and highlight it and click open.
Still problems, try a cache cleaner
Tiger Cache cleaner
OnyX
Still no go...
To reinstall iPhoto...
Navigate to /Applications and drag iPhoto to the trash
Navigate to /Library/Receipts and drag all iPhoto receipts to the trash
Navigate to ~/Library/Preferences and drag com.apple.iPhoto.plist to the trash.
Insert your iLife CD/DVD and choose to do a custom install. You will have to kee p on going through the steps of the install before you get to the screen where you can choose a custom install.
Install iPhoto.
Run Software Update and update iPhoto.
If this doesn't work
Download and install the Combo updater for 10.4.6
let me know how it goes as you go through the list of things to try

Since upgrading to version 11, I am unable to paste a signature image -- being forced to use a digital signature.

Similar Messages

Maybe you are looking for