Since upgrading to Yosemite my computer is so slow. It takes forever for a page to load. Any suggestions?

Since upgrading my MacBook Pro to Yosemite my computer is so slow. It takes forever for a page to load. Any suggestions?

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Similar Messages

  • Since upgrading to Yosemite my computer closes down instead of going to sleep.  When I restart I get a message saying your computer shut down because of a problem. Has anyone a similar problem? What is solution?

    Since upgrading to Yosemite my computer (iMac late 2012 model) closes down instead of going to sleep.  When I restart I get a message saying "your computer shut down because of a problem". Does anyone have similar problem? What is the solution?

    Sorry, I was acting like it was an email. See below:
    Sat Nov  8 14:00:39 2014
    Panic Report ***
    panic(cpu 0 caller 0xffffff802a21e80a): Kernel trap at 0xffffff7fabaa5e28, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000002d4e8000, CR4: 0x00000000001626e0
    RAX: 0x0000000000000000, RBX: 0xffffff803cbbf000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
    RSP: 0xffffff81352f3b50, RBP: 0xffffff81352f3bf0, RSI: 0x0000000000000240, RDI: 0xffffff803cbbf000
    R8:  0x0000000000000000, R9:  0x0000000000000000, R10: 0x000000e492137674, R11: 0x000000e4917aebcc
    R12: 0x0000000000000000, R13: 0x000000000000023e, R14: 0xffffff803cc90000, R15: 0x0000000000000000
    RFL: 0x0000000000010293, RIP: 0xffffff7fabaa5e28, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000000000, Error code: 0x0000000000000002, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81352f3800 : 0xffffff802a13a811
    0xffffff81352f3880 : 0xffffff802a21e80a
    0xffffff81352f3a40 : 0xffffff802a23a443
    0xffffff81352f3a60 : 0xffffff7fabaa5e28
    0xffffff81352f3bf0 : 0xffffff7fabbbd0a2
    0xffffff81352f3cb0 : 0xffffff7fab9a64a3
    0xffffff81352f3d00 : 0xffffff7fab9a91be
    0xffffff81352f3db0 : 0xffffff7fab9a80f2
    0xffffff81352f3dc0 : 0xffffff802a6d8008
    0xffffff81352f3e20 : 0xffffff7fab9a8d0b
    0xffffff81352f3e50 : 0xffffff802a6c5a03
    0xffffff81352f3ee0 : 0xffffff802a6be797
    0xffffff81352f3f00 : 0xffffff802a16be13
    0xffffff81352f3fb0 : 0xffffff802a2192c7
          Kernel Extensions in backtrace:
             com.apple.driver.AirPort.Brcm4360(900.19.8)[E6DF5F6D-3476-3BA6-B49B-BAADEC7DF58 0]@0xffffff7fab994000->0xffffff7fabf6afff
                dependency: com.apple.driver.mDNSOffloadUserClient(1.0.1b8)[25CEDABE-0952-309D-AC20-A39DF84 9DFB7]@0xffffff7fab679000
                dependency: com.apple.iokit.IO80211Family(700.52)[13EA5B53-E76C-3F27-A9CA-6D3B59AE6F44]@0xf fffff7fab8e1000
                dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7faa924000
                dependency: com.apple.iokit.IONetworkingFamily(3.2)[247581D8-DFC5-3AAE-B079-3D13F5514C2B]@0 xffffff7fab235000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    14A389
    Kernel version:
    Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
    Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
    Kernel slide:     0x0000000029e00000
    Kernel text base: 0xffffff802a000000
    __HIB  text base: 0xffffff8029f00000
    System model name: iMac13,1 (Mac-00BE6ED71E35EB86)
    System uptime in nanoseconds: 981693498948
    last loaded kext at 264463654768: com.apple.filesystems.msdosfs      1.10 (addr 0xffffff7facd6e000, size 69632)
    last unloaded kext at 325959214682: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7facd6e000, size 61440)
    loaded kexts:
    com.apple.driver.AudioAUUC           1.70
    com.apple.filesystems.autofs            3.0
    com.apple.driver.AppleBluetoothMultitouch         85.3
    com.apple.iokit.IOBluetoothSerialManager            4.3.0f10
    com.apple.driver.AppleHWSensor   1.9.5d0
    com.apple.driver.AppleMikeyHIDDriver     124
    com.apple.driver.AGPM        100.14.37
    com.apple.driver.ApplePlatformEnabler    2.1.0d1
    com.apple.driver.X86PlatformShim            1.0.0
    com.apple.driver.AppleOSXWatchdog        1
    com.apple.driver.AppleMikeyDriver           266.5
    com.apple.driver.AppleHDA 266.5
    com.apple.driver.AppleUpstreamUserClient          3.6.1
    com.apple.GeForce    10.0.0
    com.apple.iokit.IOUserEthernet       1.0.1
    com.apple.Dont_Steal_Mac_OS_X      7.0.0
    com.apple.driver.AppleThunderboltIP       2.0.2
    com.apple.driver.AppleHWAccess   1
    com.apple.driver.AppleHV    1
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport           4.3.0f10
    com.apple.driver.AppleSMCLMU     2.0.4d1
    com.apple.driver.AppleLPC  1.7.3
    com.apple.driver.AppleIntelHD4000Graphics       10.0.0
    com.apple.driver.AppleIntelFramebufferCapri     10.0.0
    com.apple.driver.AppleMCCSControl          1.2.10
    com.apple.iokit.SCSITaskUserClient            3.7.0
    com.apple.driver.AppleUSBODD      3.5.0
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless      1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib  1.0.0d1
    com.apple.BootCache            35
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage           2.6.5
    com.apple.iokit.AppleBCM5701Ethernet   10.1.2b3
    com.apple.driver.AppleSDXC           1.6.5
    com.apple.driver.AirPort.Brcm4360           900.19.8
    com.apple.driver.AppleAHCIPort     3.0.7
    com.apple.driver.AppleUSBHub      705.4.1
    com.apple.driver.AppleUSBXHCI     705.4.14
    com.apple.driver.AppleUSBEHCI     705.4.14
    com.apple.driver.AppleHPET           1.8
    com.apple.driver.AppleACPIButtons           3.1
    com.apple.driver.AppleRTC  2.0
    com.apple.driver.AppleSMBIOS       2.1
    com.apple.driver.AppleACPIEC        3.1
    com.apple.driver.AppleAPIC            1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          218.0.0
    com.apple.nke.applicationfirewall   161
    com.apple.security.quarantine        3
    com.apple.security.TMSafetyNet     8
    com.apple.driver.AppleIntelCPUPowerManagement        218.0.0
    com.apple.kext.triggers         1.0
    com.apple.driver.AppleBluetoothHIDKeyboard    175.5
    com.apple.driver.AppleHIDKeyboard         175.5
    com.apple.driver.IOBluetoothHIDDriver    4.3.0f10
    com.apple.driver.AppleMultitouchDriver   260.30
    com.apple.iokit.IOSerialFamily         11
    com.apple.driver.DspFuncLib          266.5
    com.apple.kext.OSvKernDSPLib      1.15
    com.apple.iokit.IOAudioFamily         200.6
    com.apple.vecLib.kext           1.2.0
    com.apple.nvidia.driver.NVDAGK100Hal    10.0.0
    com.apple.nvidia.driver.NVDAResman        10.0.0
    com.apple.iokit.IOBluetoothHostControllerUSBTransport            4.3.0f10
    com.apple.iokit.IOBluetoothFamily  4.3.0f10
    com.apple.iokit.IOUSBUserClient     705.4.0
    com.apple.driver.AppleThunderboltEDMSink       4.0.2
    com.apple.driver.AppleSMBusPCI   1.0.12d1
    com.apple.driver.X86PlatformPlugin          1.0.0
    com.apple.driver.AppleSMC 3.1.9
    com.apple.driver.IOPlatformPluginFamily 5.8.0d49
    com.apple.driver.AppleHDAController        266.5
    com.apple.iokit.IOHDAFamily           266.5
    com.apple.iokit.IOSurface     97
    com.apple.iokit.IOAcceleratorFamily2         156.4
    com.apple.AppleGraphicsDeviceControl     3.7.21
    com.apple.iokit.IONDRVSupport      2.4.1
    com.apple.driver.AppleSMBusController    1.0.13d1
    com.apple.iokit.IOGraphicsFamily    2.4.1
    com.apple.iokit.IOSCSIBlockCommandsDevice       3.7.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice        3.7.0
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.iokit.IOUSBMassStorageClass     3.7.0
    com.apple.iokit.IOSCSIArchitectureModelFamily   3.7.0
    com.apple.driver.AppleUSBMergeNub       705.4.0
    com.apple.driver.AppleUSBComposite        705.4.9
    com.apple.driver.AppleThunderboltDPInAdapter            4.0.6
    com.apple.driver.AppleThunderboltDPOutAdapter         4.0.6
    com.apple.driver.AppleThunderboltDPAdapterFamily    4.0.6
    com.apple.driver.AppleThunderboltPCIDownAdapter     2.0.2
    com.apple.driver.AppleThunderboltNHI    3.1.7
    com.apple.iokit.IOThunderboltFamily         4.2.1
    com.apple.iokit.IOEthernetAVBController  1.0.3b3
    com.apple.iokit.IO80211Family       700.52
    com.apple.driver.mDNSOffloadUserClient 1.0.1b8
    com.apple.iokit.IONetworkingFamily           3.2
    com.apple.iokit.IOAHCIFamily          2.7.0
    com.apple.iokit.IOUSBFamily            705.4.14
    com.apple.driver.AppleEFINVRAM  2.0
    com.apple.driver.AppleEFIRuntime            2.0
    com.apple.iokit.IOHIDFamily            2.0.0
    com.apple.iokit.IOSMBusFamily       1.1
    com.apple.security.sandbox 300.0
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.driver.AppleKeyStore     2
    com.apple.driver.AppleMobileFileIntegrity            1.0.5
    com.apple.driver.AppleCredentialManager           1.0
    com.apple.driver.DiskImages           389.1
    com.apple.iokit.IOStorageFamily      2.0
    com.apple.iokit.IOReportFamily       31
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform         3.1
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto     1.0
    com.apple.kec.Libm   1
    com.apple.kec.pthread          1
    Model: iMac13,1, BootROM IM131.010A.B05, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 2.9f5
    Graphics: NVIDIA GeForce GT 640M, NVIDIA GeForce GT 640M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF4), Broadcom BCM43xx 1.0 (7.15.124.12.8)
    Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: APPLE HDD ST1000LM024, 1 TB
    USB Device: HD-LBU3
    USB Device: Hub
    USB Device: Apple USB SuperDrive
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: Hub
    USB Device: Hub
    USB Device: BRCM20702 Hub
    USB Device: Bluetooth USB Host Controller
    Thunderbolt Bus: iMac, Apple Inc., 23.4

  • Since upgrading to Yosemite on my iMac, My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad... Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..

    Since upgrading to Yosemite on my iMac: My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad...
    Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..
    Thanks

    29/11/2014 20:17:01.315 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
    29/11/2014 20:17:37.013 com.apple.backupd[616]: Finished scan
    29/11/2014 20:17:43.108 com.apple.backupd[616]: Saved event cache at
    /Volumes/Time Machine Backups/Backups.backupdb/Geoff Lambrechts’s iMac
    (2)/2014-11-29-200648.inProgress/9B453663-603F-40B8-AC21-24F05C724E15/.6162AD34- 38F8-30AB-98E0-4A22FB9D311F.eventdb
    29/11/2014 20:17:43.207 com.apple.backupd[616]: Not using file event
    preflight for Macintosh HD
    29/11/2014 20:18:01.561 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
    29/11/2014 20:18:16.288 com.apple.xpc.launchd[1]:
    (com.apple.quicklook[715]) Endpoint has been activated through legacy
    launch(3) APIs. Please switch to XPC or bootstrap_check_in():
    com.apple.quicklook
    29/11/2014 20:18:23.705 com.apple.SecurityServer[56]: Session 100013 created
    29/11/2014 20:18:32.046 mdworker[718]: code validation failed in the
    process of getting signing information: Error Domain=NSOSStatusErrorDomain
    Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    29/11/2014 20:19:01.662 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
    29/11/2014 20:19:45.458 com.apple.xpc.launchd[1]:
    (com.apple.imfoundation.IMRemoteURLConnectionAgent) The
    _DirtyJetsamMemoryLimit key is not available on this platform.
    29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
    (com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
    launch(3) APIs. Please switch to XPC or bootstrap_check_in():
    com.apple.pubsub.ipc
    29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
    (com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
    launch(3) APIs. Please switch to XPC or bootstrap_check_in():
    com.apple.pubsub.notification
    29/11/2014 20:20:01.138 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:21:01.484 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:21:13.430 com.apple.backupd[616]: Found 4529 files (1.1 GB)
    needing backup
    29/11/2014 20:21:18.786 com.apple.backupd[616]: 2.82 GB required (including
    padding), 1.24 TB available
    29/11/2014 20:21:31.775 Console[734]: Failed to connect (_consoleX) outlet
    from (NSApplication) to (ConsoleX): missing setter or instance variable
    29/11/2014 20:21:34.230 WindowServer[162]: disable_update_timeout: UI
    updates were forcibly disabled by application "Console" for over 1.00
    seconds. Server has re-enabled them.
    29/11/2014 20:21:36.898 WindowServer[162]: common_reenable_update: UI
    updates were finally reenabled by application "Console" after 3.67 seconds
    (server forcibly re-enabled them after 1.00 seconds)
    29/11/2014 20:21:36.971 coreservicesd[83]: SFLEntryBase::ListHasChanged
    mach_msg returned 10000004d
    29/11/2014 20:22:01.817 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:23:02.170 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:24:02.547 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:25:02.168 CalendarAgent[218]:
    [Refusing to parse response
    to PROPPATCH because of content-type: .]
    29/11/2014 20:25:02.233 CalendarAgent[218]:
    [Refusing to parse response
    to PROPPATCH because of content-type: .]
    29/11/2014 20:25:02.236 CalendarAgent[218]:
    [Refusing to parse response
    to PROPPATCH because of content-type: .]
    29/11/2014 20:25:02.284 CalendarAgent[218]:
    [Refusing to parse response
    to PROPPATCH because of content-type: .]
    29/11/2014 20:25:03.059 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:25:12.674 com.apple.xpc.launchd[1]:
    (com.apple.imfoundation.IMRemoteURLConnectionAgent) The
    _DirtyJetsamMemoryLimit key is not available on this platform.
    29/11/2014 20:26:03.464 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:27:03.841 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    On 29 November 2014 at 19:29, Apple Support Communities Updates <

  • I upgraded to Yosemite and computer running very slow. It is an older iMac 2009. Thinking of downgrading os or upgrading ram unless there is something else I can try?

    I upgraded to Yosemite and computer running very slow. It is an older iMac 2009. if I cant get it running faster I will have to downgrade os or upgrade ram. Is there something else I can try? Here is scan of computer:
    Problem description:
    computer Very slow after upgrading to OS Yosemite
    EtreCheck version: 2.0.11 (98)
    Report generated November 15, 2014 at 3:50:50 PM MST
    Hardware Information: ℹ️
    iMac (20-inch, Early 2009) (Verified)
    iMac - model: iMac9,1
    1 2.66 GHz Intel Core 2 Duo CPU: 2-core
    2 GB RAM Upgradeable
    BANK 0/DIMM0
    1 GB DDR3 1067 MHz ok
    BANK 1/DIMM0
    1 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
    NVIDIA GeForce 9400 - VRAM: 256 MB
    iMac 1680 x 1050
    System Software: ℹ️
    OS X 10.10 (14A389) - Uptime: 4 days 4:38:8
    Disk Information: ℹ️
    Hitachi HDT721032SLA380 disk0 : (320.07 GB)
    S.M.A.R.T. Status: Verified
    EFI (disk0s1) <not mounted> : 210 MB
    Macintosh HD (disk0s2) /  [Startup]: 319.21 GB (201.09 GB free)
    Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    OPTIARC DVD RW AD-5670S 
    USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple Inc. Keyboard Hub
    Apple Inc. Apple Keyboard
    USB Reader USB Mass Storage Device 31.67 GB
    S.M.A.R.T. Status: Verified
    NO NAME (disk1s1) /Volumes/NO NAME : 31.67 GB (27.49 GB free)
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
    Apple Inc. Bluetooth USB Host Controller
    Gatekeeper: ℹ️
    Mac App Store and identified developers
    Kernel Extensions: ℹ️
    /Applications/Toast 11 Titanium/Spin Doctor.app
    [not loaded] com.hzsystems.terminus.driver (4) Support
    /Applications/Toast 11 Titanium/Toast Titanium.app
    [not loaded] com.roxio.TDIXController (2.0) Support
    /System/Library/Extensions
    [not loaded] com.Huawei.driver.HuaweiDataCardDriver (4.0.6) Support
    [not loaded] com.roxio.BluRaySupport (1.1.6) Support
    [not loaded] com.sony.driver.prs (1.0.1d1) Support
    Startup Items: ℹ️
    HWNetMgr: Path: /Library/StartupItems/HWNetMgr
    Startup items are obsolete and will not work in future versions of OS X
    Problem System Launch Agents: ℹ️
    [failed] com.apple.accountsd.plist
    [failed] com.apple.AirPlayUIAgent.plist
    [failed] com.apple.bird.plist
    [failed] com.apple.CalendarAgent.plist
    [failed] com.apple.CallHistoryPluginHelper.plist
    [failed] com.apple.CallHistorySyncHelper.plist
    [failed] com.apple.cloudd.plist
    [failed] com.apple.coreservices.appleid.authentication.plist
    [failed] com.apple.coreservices.uiagent.plist
    [failed] com.apple.EscrowSecurityAlert.plist
    [failed] com.apple.icloud.fmfd.plist
    [failed] com.apple.iconservices.iconservicesagent.plist
    [failed] com.apple.nsurlsessiond.plist
    [failed] com.apple.pbs.plist
    [failed] com.apple.pluginkit.pkd.plist
    [failed] com.apple.printtool.agent.plist
    [failed] com.apple.scopedbookmarkagent.xpc.plist
    [failed] com.apple.secd.plist
    [failed] com.apple.security.cloudkeychainproxy.plist
    [failed] com.apple.spindump_agent.plist
    [failed] com.apple.telephonyutilities.callservicesd.plist
    Problem System Launch Daemons: ℹ️
    [failed] com.apple.AssetCacheLocatorService.plist
    [failed] com.apple.awdd.plist
    [failed] com.apple.cache_delete.plist
    [failed] com.apple.coresymbolicationd.plist
    [failed] com.apple.ctkd.plist
    [failed] com.apple.diagnosticd.plist
    [failed] com.apple.iconservices.iconservicesagent.plist
    [failed] com.apple.iconservices.iconservicesd.plist
    [failed] com.apple.ifdreader.plist
    [failed] com.apple.MobileFileIntegrity.plist
    [failed] com.apple.nehelper.plist
    [failed] com.apple.nsurlsessiond.plist
    [failed] com.apple.periodic-daily.plist
    [failed] com.apple.periodic-weekly.plist
    [failed] com.apple.sandboxd.plist
    [failed] com.apple.softwareupdate_download_service.plist
    [failed] com.apple.softwareupdated.plist
    [failed] com.apple.spindump.plist
    [failed] com.apple.sysmond.plist
    [failed] com.apple.tccd.system.plist
    [failed] com.apple.wdhelper.plist
    [failed] org.cups.cupsd.plist
    Launch Agents: ℹ️
    [not loaded] com.adobe.AAM.Updater-1.0.plist Support
    [loaded] com.adobe.AdobeCreativeCloud.plist Support
    [not loaded] com.sony.ReaderLibrary.RunReaderLibrary.plist Support
    Launch Daemons: ℹ️
    [loaded] com.adobe.fpsaud.plist Support
    User Launch Agents: ℹ️
    [loaded] com.adobe.AAM.Updater-1.0.plist Support
    [loaded] com.adobe.ARM.[...].plist Support
    [loaded] com.adobe.ARM.[...].plist Support
    [loaded] com.google.keystone.agent.plist Support
    User Login Items: ℹ️
    iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    HP Registration Assistant UNKNOWN (missing value)
    Reader Library Launcher ApplicationHidden (/Library/Reader Library/Reader Library Launcher.app)
    HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
    Internet Plug-ins: ℹ️
    Default Browser: Version: 600 - SDK 10.10
    OfficeLiveBrowserPlugin: Version: 12.3.6 Support
    net.juniper.DSSafariExtensions: Version: (null) Support
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
    FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
    AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 Support
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
    Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    iPhotoPhotocast: Version: 7.0
    NP_2020Player_IKEA: Version: 5.0.94.0 - SDK 10.6 Support
    AdobePDFViewer: Version: 11.0.0 - SDK 10.6 Support
    User Internet Plug-ins: ℹ️
    BrowserPlus_2.9.8: Version: 2.9.8 Support
    fbplugin_1_0_3: Version: (null) Support
    3rd Party Preference Panes: ℹ️
    BrowserPlus  Support
    Flash Player  Support
    Perian  Support
    Time Machine: ℹ️
    Time Machine not configured!
    Top Processes by CPU: ℹ️
         7% syncdefaultsd
         0% launchservicesd
         0% launchd
         0% systemstatsd
         0% SystemUIServer
    Top Processes by Memory: ℹ️
    126 MB HP_Officejet_4620_series
    30 MB Finder
    28 MB ScreenSaverEngine
    24 MB mds
    24 MB WindowServer
    Virtual Memory Information: ℹ️
    25 MB Free RAM
    344 MB Active RAM
    333 MB Inactive RAM
    337 MB Wired RAM
    9.71 GB Page-ins
    146 MB Page-outs

    could the launch agents failing slow the computer or they just don't work. I mean I am willing to upgrade ram but not if there is good chance it won't change speed much. Also to downgrade is it necessary to format the hard drive?

  • Since upgrading to yosemite, my mail is so slow

    I use Apple mail app on my mid 2012 macbook pro, it uses sky yahoo mail, never was a problem with Mavericks.
    Now i open mail, it takes a long time to connect , send and receive mail, i have tried connection doctor, it does take a while and shows as connected, which it is.
    I  am using POP 3 and smtp
    please help !!!!

    since upgrading to Yosemite, not only is my whole computer very slow and tending to freeze, but Mail just won't function, and keeps throwing up a box every few seconds saying it can't connect. It's very difficult even to get Mail to quit. Basically, the whole computer is non-functional.

  • Computer randomly shuts down/Very unstable since upgrade to yosemite

    Since upgrading to yosemite my computer has become very unstable.
    For anyone that can help with what may be causing this issue I would really
    appreciate it. As for "Adobe" being a possible cause, how can I determine
    which Adobe program and related files are the culprit?
    Thank you very much to anyone who offer's their support and help.
    EtreCheck version: 2.1.8 (121)
    Report generated February 10, 2015 at 12:59:00 PM MST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 209
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 384 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 0:9:57
    Disk Information: ℹ️
        Hitachi HTS545032B9A302 disk0 : (320.07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 318.84 GB (62.33 GB free)
                Core Storage: disk0s2 319.21 GB Online
        MATSHITADVD-R   UJ-8A8
    USB Information: ℹ️
        Apple Computer, Inc. IR Receiver
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
        /etc/hosts - Count: 15
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Application Support/Roxio
        [not loaded]    com.roxio.TDIXController (1.7) [Click for support]
            /System/Library/Extensions
        [loaded]    com.manycamllc.driver.ManyCamDriver (0.0.9 - SDK 10.5) [Click for support]
        [not loaded]    com.paceap.kext.PACESupport (5.4) [Click for support]
        [not loaded]    com.paceap.kext.PACESupport2 (5.4) [Click for support]
        [loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.74) [Click for support]
        [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) [Click for support]
        [not loaded]    com.symantec.kext.ips (1.3.1f6) [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [not loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
        [not loaded]    com.epson.eventmanager.agent.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [not loaded]    com.rim.BBAlbumArtCacher.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [failed]    com.parallels.mobile.kextloader.launchdaemon.plist [Click for support]
        [running]    com.rim.BBDaemon.plist [Click for support]
        [running]    com.smithmicro.schedulerdaemon.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [failed]    com.avast.home.userinit.plist [Click for support]
        [loaded]    com.divx.agent.postinstall.plist [Click for support]
        [not loaded]    com.facebook.videochat.[redacted].plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
        [not loaded]    com.smithmicro.cleaning.schedulermailer.plist [Click for support]
    User Login Items: ℹ️
        Google Chrome    Application Hidden (/Applications/Google Chrome.app)
        BlackBerry Device Manager    Application  (/Library/Application Support/BlackBerry/BlackBerry Device Manager.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        DivXBrowserPlugin: Version: 2.2 [Click for support]
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    Safari Extensions: ℹ️
        Open in Internet Explorer
        DivX Plus Web Player HTML5 <video>
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: ON
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 318.84 GB Disk used: 256.51 GB
        Destinations:
            Data [Network]
            Total size: 3.00 TB
            Total number of backups: 30
            Oldest backup: 2014-12-22 10:14:08 +0000
            Last backup: 2015-02-10 02:49:48 +0000
            Size of backup disk: Excellent
                Backup size 3.00 TB > (Disk size 318.84 GB X 3)
    Top Processes by CPU: ℹ️
             7%    WindowServer
             1%    Google Chrome
             0%    opendirectoryd
    Top Processes by Memory: ℹ️
        129 MB    Google Chrome
        103 MB    Safari
        90 MB    WindowServer
        73 MB    Spotlight
        64 MB    Finder
    Virtual Memory Information: ℹ️
        81 MB    Free RAM
        1.50 GB    Active RAM
        1.41 GB    Inactive RAM
        1.05 GB    Wired RAM
        1.66 GB    Page-ins
        21 MB    Page-outs
    Diagnostics Information: ℹ️
        Feb 10, 2015, 12:42:48 PM    Self test - passed
        Feb 9, 2015, 05:23:10 PM    /Library/Logs/DiagnosticReports/mdworker_2015-02-09-172310_[redacted].crash

    A number of problems exist including the likelihood of system corruption as a result of using CleanMyMac.
    It is not reasonable to expect a Mac to operate normally after using CleanMyMac. Like many ill-conceived "cleaning" utilities, it is capable of corrupting a Mac to the point that erasing it completely is the only practicable means of recovery. CleanMyMac is not the only example; it is merely popular due to marketing strategies that are as effective as they are intrusive.
    There is no practicable way to reverse the effects of having used CleanMyMac2 other than to reinstall all affected files from backups or their original sources. Its developer's uninstallation instructions are ineffective despite their recent claims to the contrary. Only MacPaw, its developer, can know the reason for that, but I can think of two possibilities: either they are purposefully leaving components behind for reasons known only to them, or they simply don't know what they're doing. Neither one of those possibilities is particularly comforting for the user.
    Reinstalling OS X alone will have no effect on either removing CleanMyMac or reversing the damage it is capable of inflicting upon a system.
    Besides CleanMyMac2, garbage "cleaning" and "anti-virus" software exists, specifically "Avast", "Smith Micro", and "Symantec / Norton". Those products should not be installed on any Mac, because they convey no benefit and are only capable of creating or contributing to problems.
    In addition, that Mac's Hosts file appears to have been modified. Fixing a modified Hosts file requires specific instructions. Apple Support Communities contributor and EtreCheck author etresoft recently added a User Tip discussing that concern, and how to correct it: Fixing a hacked /etc/hosts file
    The recovery procedure that follows will obviate the need to correct all those separate problems and is likely to require the least amount of your time and interaction.
    Follow the applicable recovery procedure below:
    If you have a backup that you created prior to using CleanMyMac, now is the time to use it. For Time Machine, boot OS X Recovery, and at the Mac OS X Utilities screen, choose Restore from Time Machine Backup. Choose a date preceding the installation of CleanMyMac.
    If you do not have a backup that predates the use of CleanMyMac, create one now. To do that read Mac Basics: Time Machine backs up your Mac.
    The recovery procedure will require that you erase the Mac using OS X Recovery, and then create a new user whose contents will be empty. You will then be able to use Setup Assistant to migrate your essential documents including photos, music, work products and other essential files.
    When doing so, select only your previous User account and do not select "Applications", "Computer and Network Settings" or "Other files and folders". De-select those choices.
    Subsequent to using Setup Assistant, you will need to reinstall the essential software you may require, once again remembering to install software only from their original sources, and omitting all non-essential software.
    To erase and install Yosemite read: OS X Yosemite: Erase and reinstall OS X
    To migrate your essential documents read: OS X Yosemite: Transfer your info from a computer or storage device and follow the procedure under Transfer info from a Time Machine backup or other storage device.

  • Can someone tell me why, since upgrading to Yosemite, I keep getting a message window saying "Another device on the network  is using your computer's IP address?"

    Can someone tell me why, since upgrading to Yosemite, I keep getting a message window saying "Another device on the network  is using your computer's IP address?"

    That may be what is a fairly common problem of 2 devices mistakenly assigned the same address. Try shutting off all of the devices connected to your router, reboot the router and then the devices connected to it.

  • Can't save to OS X Server from Microsoft Word since upgrading to Yosemite

    When I am working on a Word Document and I click "save" the box pops up and every folder on my local computer is available as a location save my file, but my server is not.  it simply does not show up.  I can save to my local drive and then drag it over to my server through finder, but I cannot actually save the file directly from word to the server.  This has only happened since upgrading to Yosemite and server 4.0

    Word isn't able to save on a SMB volume, the problem is not limited to Yosemite, also on Mavericks. There is an easy solution (on Mavericks, which I tested, and hope that will do so under Yosemite, tomorrow I will test). Unmount the volumes that You want to work with, from the finder select Connect (Shift-CMD-K) and give the address of the volume with the prefix afp instead of SMB (afp://192.168.1.1 or similar). That will do it!
    HTH Guido

  • Asked to Sign-in to iCloud every time I start my Mac since upgrading to Yosemite

    Since upgrading to Yosemite every time I start my computer it goes through the normal grey screen stage and then I get to login as normal. After logging in I then get asked to sign-in to iCloud. I sign-in successfully and agree to the terms and conditions, choose to upgrade to iCloudDrive and then it says setting up my Mac, which takes about 20 seconds before the desktop displays. I'd expect this behaviour on the first reboot after installing Yosemite but it's asking me to sign-in to iCloud every time I restart and taking me through all these steps!
    I'm on iMac, Late 2012, 2.9 GHz Intel Core i5, 8GB

    Just to say I never found a solution to this after hours of looking for answers and trying different things. I finally decided to take the plunge and reformat my hard drive and reinstall OS X Yosemite and now is all good on this front.

  • Since upgrading to Yosemite I am getting frequently "safari can't open the page (blank) because the server unexpectedly dropped the connection this sometimes occurs when the server is busy. wait and then try again"

    Since upgrading to Yosemite on my iMac I am frequently getting "safari can't open the page (blank) because the server unexpectedly dropped the connection this sometimes occurs when the server is busy. wait and then try again". This is with both a WiFi and Ethernet connection. The server is working fine from other devices using WiFi onto it such as iPhones, iPads, MacBook (which is also on Yosemite) so don't believe its an issue with the server.
    I am also noticing page load very slowly when this problem is not occurring.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Since upgrading to yosemite, I can't connect to the app store (or icloud).

    I have a Macbook air, early 2014.
    Since upgrading to Yosemite, can't connect to the App Store (Message: Your device or computer could not be verified. Contact support for assistance. ) or to iCloud ( You can’t sign in at this time. Try signing in again.).
    I have another Macbook air (late 2013)  running mavericks that is connecting without any problem. I can also login in two different iPads (iOS 8), one iPhone (iOS 8) and in icloud.com.
    Have spent more than one hour with support on the phone. Tried safe boot, login with a different apple id, reseting pram,  running disk utility... No success.
    I could upgrade to Yosemite 10.10.1 by restarting without the need to insert the apple id, so I am with the latest version running. Still no success.
    Any ideas ?
    Many thanks,
    Alysson

    If you haven't already done so, please connect to a different network, such as a public hotspot, and test. Otherwise, see below.
    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Problem since upgrading to Yosemite: iMac wont boot up and simply displays a '?' symbol

    my iMac has been slow since upgrading to Yosemite and has now stopped working completely - when I boot up all I get is this screen (for some reason picture has turned upside down when I uploaded) any ideas?

    Startup – Computer Stops or Delays
    Startup Issues - Resolve
    Startup Issues - Resolve (2)
    Startup Issues - Resolve (3)

  • Since i upgraded to Yosemite, my iMac is too slow

    Since i upgraded to Yosemite, my iMac is too slow. For example, at the starting up, it needs minutes 34" to open.
    When i open a window / folder, i need between 1 and 2 minutes. By opening a pdf or an other document i uses 2 to 7 minutes.
    WHY? How can i change this?

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Fonts 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\//&&/\/(Lib|usr).+\/(.+\.framework|Contents|Info\.plist|Resources|Versions)$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/(Content|Resource|Version)s(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/[AD]/d;p;' 's/Pr.+n //p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n   "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2 x\1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1'|sort';};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1'" {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} "`S2 ${p[35]}`" );N1=${#c2[@]};for j in {0..10};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Stylesheet );N3=${#l[@]};for i in {0..3};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 24 22 29;B7 12;B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;C3 29;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+10)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 58 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 58;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Slow since upgrading to yosemite

    Hello I'm a new mac user and need some info.
    I noticed that my mac is a bit slower since upgrading to Yosemite.
    I get to see many times when opening an app the spinning colourful ball.
    I did an etrecheck since i read on an over discussion that this might help resolving my problem.
    Thank you
    Problem description:
    Slow since upgrading to Yosemite
    EtreCheck version: 2.1.8 (121)
    Report generated March 28, 2015 at 3:10:32 PM GMT+2
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (21.5-inch, Late 2012) (Technical Specifications)
        iMac - model: iMac13,1
        1 2.7 GHz Intel Core i5 CPU: 4-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        NVIDIA GeForce GT 640M - VRAM: 512 MB
            iMac 1920 x 1080
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 0:21:45
    Disk Information: ℹ️
        APPLE HDD HTS541010A9E662 disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 999.35 GB (793.45 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
        /etc/hosts - Count: 43
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        uTorrent    UNKNOWN  (missing value)
        Dropbox    UNKNOWN  (missing value)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Default Browser: Version: 600 - SDK 10.10
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Growl  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
             1%    WindowServer
             0%    fontd
             0%    com.apple.WebKit.WebContent
             0%    AppleSpell
             0%    dpd
    Top Processes by Memory: ℹ️
        283 MB    com.apple.WebKit.WebContent
        120 MB    mds_stores
        112 MB    Safari
        77 MB    Finder
        60 MB    WindowServer
    Virtual Memory Information: ℹ️
        5.60 GB    Free RAM
        1.71 GB    Active RAM
        477 MB    Inactive RAM
        795 MB    Wired RAM
        1.15 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 28, 2015, 02:48:11 PM    Self test - passed
        Mar 26, 2015, 10:11:19 PM    /Library/Logs/DiagnosticReports/Loader_2015-03-26-221119_[redacted].cpu_resourc e.diag [Click for details]

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Since upgrading to Yosemite on my Mac airbook I can no longer sync my outlook 2011 calendar onto my iPhone through iTunes, what's happening apple, I am not happy!!??i

    Since upgrading to Yosemite on my Mac airbook I can no longer sync my outlook 2011 calendar on my iPhone through iTunes??!!

    Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer

Maybe you are looking for