Since upgrading toFirefox 4, I can no longer return to my e-mail message from an on-line attachment without shutting down the browser since there is no "close tab" option

Formerly, an e-mail with a website, photo, etc. attachment that I opened required only that I click close tab return to my e-mail message. Since upgrading a few days ago, the only option present is to exit, which now requires re-opening firefox then my e-mail browser. Any website I am examining that I want to close automatically exits me from Firefox.

there should be an X on the right side of each tab. clicking on it should close that tab

Similar Messages

Since upgrading to Mavericks my iMac no longer recognizes my digital camera. iPhoto will open, but my camera never appears in the source list or goes into import mode. Help!

Since upgrading to Mavericks my iMac no longer recognizes my digital camera. iPhoto will open, but my camera never appears in the source list or goes into import mode. Help!

I found that if you open iMage Capture App that seems to trigger iPhoto to open and thew camera is connected. At least that happens with my camera. Good luck.

I have forgotten my appleID password and the email it is linked to is deactivated, security questions aren't working. This is on my iPhone and iTunes acs so I can't sync with my new computer. How do I merge AppleID accounts and shut down the old one?

I have forgotten my appleID password and the email it is linked to is deactivated, security questions aren't working. This is on my iPhone and iTunes acs so I can't sync with my new computer. How do I merge AppleID accounts and shut down the old one (when I have no password and the security questions aren't working?)

You cannot merge Apple ID accounts, that has never been supported.
You can contact the Apple ID Security folks per the listing in http://support.apple.com/kb/HT5699 and they can help reset security questions and get the account working.

Since upgrading to Lion I can no longer mount my external hard drive

I backed up about 10 minutes before installing Lion when I was on Snow Leopard. I know my drive works fine and there are no issues with it.
However, when Lion was installed, I wanted to perform a Time Machine Backup, but it said my backup disk was unavailable. I checked in the Finder and it wasn't showing up in the side bar, even though it was connected to my Mac and the indicator light on the hard drive itself was flashing - suggesting drive activity. I can also hear the drive spinning.
I opened Disk Utility and the external hard drive appears in the side bar and it says 'WD My Passport 071A Media'. Underneath that is the 'Time Machine Backups' drive which is greyed out. I have tried right clicking on it and choosing Mount but it won't mount, and I have also tried Repair Disk which doesn't finish, but also doesn't report any errors either. If I run Verify Disk and Repair Disk on the 'WD My Passport 071A Media' drive (which is the same drive) it does not report any problems and says the drive is working fine.
I have tried updating the drive's firmware and using different ports but neither have worked. I have also tried rebooting my Mac.
I really need to use this drive to backup and I can't format it because I can't afford to lose any data on there. Could someone please give me some advice or tell me how to fix this? I would appreciate it so much.
Thanks,
Nathan

Nathan Miah wrote:
Is there absolutely anything else I could do to sort this such as phone Apple Support
If you want.
or maybe install Snow Leopard using the disc it came on with my Mac and just set it up from a Time Machine Backup on my external hard drive (since it works under SL)?
Did you install Lion on an empty partition, or did you upgrade Snow Leopard? If you upgraded, I'd not recommend erasing it, since your backups are apparently gone. It's doubtful Snow Leopard will recognize them.
It's not just backups on the drive either, there are other important things on there, so why won't they show?
Mixing Time Machine backups and other data is not a good idea. See #3 in Time Machine - Frequently Asked Questions. It sounds like the whole disk is corrupted.
I just really don't understand how this happened. Could it not be an issue with WD because they haven't issued firmware to support Lion yet?
If this is a simple external HD, connected by USB or FireWire, no, unless you installed some of WD's software on it. That shouldn't prevent it from being seen at all, but anything's possible.

Can't open Elements 8 more than once without shutting down the computer

After starting up my computer, I can open Elements 8 (organizer and/or editor) and work as usual. However, if I close the program, then check email or work on something else, and then I decide to open Elements again, I get the opening screen, click Organizer, and it just disappears. When I shut down the computer, it says there are programs waiting to close, but it shuts down quickly despite that. Once I have restarted, all is normal again, until I decide to open Elements twice.
I have Windows 7 professional.
Do I need to reinstall Elements 8?
Cam

It sounds like the Organizer and Editor aren't closing all the way, which makes it so you can't re-open them.
To know for sure if this is the case, after you close either program, open Task Manager (CTRL+SHIFT+ESC), go the Processes tab, click the option at the bottom to show processes from all users, and then scan the list for PhotoshopElementsEditor.exe and/or PhotoshopElementsOrganizer.exe.
If there, then that means they aren't getting closed.
As a temporary workaround until you find out why they won't close, you can end the process in Task Manager instead of rebooting the computer.
As for the cause, it is possible that something else you have running in the background, perhaps security software, is causing the issue. To determine if that's the case, restart the computer without any startup items or non-essential services, and then run Elements 8. Here are some instructions:
Windows 7/Vista: http://go.adobe.com/kb/ts_kb404913_en-us
Windows XP: http://go.adobe.com/kb/ts_kb404984_en-us
If you can close and re-open the Editor/Organizer properly without anything else running, then something was preventing the program from closing properly. Use a process of elimination to determine what; something similar to this method:
Open the System Configuration utility.
Re-enable approximately half of the items that were disabled.
Click OK, and restart your computer for the changes to take effect.
Check if you can close and re-open the Editor/Organizer.
If you can't anymore, open the System Configuration utility and disable half of the most recently enabled items.
If you can still, open the System Configuration utility and re-enable half of the remaining items.
Go back to Step 3, and continue dividing the items into halves until you have determined which startup item or service is causing the issue.
Once you have isolated the problematic startup item or service, contact its manufacturer for an update or configuration information, or leave it disabled.
HTH

Since upgrading to Yosemite, I can no longer print to my Kodak AiO. The fix on Kodak site does not work.

Since upgrading my Macbook to Yosemite 10, I can no longer print to my Kodak AiO 5250. The fix on Kodak site with Terminal does not prompt to password like it says it will. Macbook has all available upgrades completed. Printer works with a PC.

This is where I found the Kodak fix: http://support.en.kodak.com/app/answers/detail/a_id/49247/selected/true
I'm not really comfortable in 'Terminal' but tried it. Nothing happened after pasting in the first command. The fix says it will ask for password.
I see now this seems to be a pretty common problem, I would have thought Apple would fix it with an update for the number of complaints I've found. Since Kodak is in receivership or bankruptcy, I would think it's unlikely they will have any more solutions. I feel like Yosemite stole my printer.

Since upgrading to yosemite, I can no longer find any Windows Computers on my domain

We upgraded two out of three iMacs to Yosemite a while back. Since that time, the two that are on Yosemite cannot see any non-mac computers in the network browser. We can manually connect by going to Go / Connect to Server in Finder, and it works using either the IP or the relative path (smb://cpu1234/share). The Mavericks computer still sees the entire network with no problems.
Does anyone know how to fix this uber-frustrating issue?

Hi olejim51,
Thanks for visiting Apple Support Communities.
It sounds like you're not able to connect to your ISPs mail server on your iMac or MacBook Air.
There could be several causes of the error message you're seeing. I would start with the steps in the "Mail Connection Doctor shows one or more red dots in the account Status column" section of this article to troubleshoot the message:
OS X Mail: Troubleshooting sending and receiving email messages
This article contains a variety of steps that can help resolve an issue like the one you're seeing.
All the best,
Jeremy

Since upgrading to Lion i can no longer see other computers in my network and vice versa. What has gone on?

As the title suggests! I can no longer see any of the computers in my network, Mac or otherwise.
I have checked sharing permissions on all required computers and all seems to be good and have disabled firewalls.
I notice a few people have had similar problems with screen sharing but I am not even seeing another station to pottentialy share a screen with!
MBP 2.4GHz Intel Core 2 Duo
OS X - 10.7

Regarding the printer:
From: sterling r: https://discussions.apple.com/thread/5506493?tstart=0
If that does not help then from braden85:
This first article is about changing or updating printer software in Mountain Lion, and can be found here:
OS X Mountain Lion: Change or update printer software
http://support.apple.com/kb/PH10622
This next article tells you where to find the printer software for your specific printer brand:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/ht3669

Since upgrading to Mavericks, I can no longer see my Time Machine or printer on the network.

I have uninstalled printer and re-installed drivers but no printer is showing when I click to + new printer.
Also the TM can no longer be seen... Suggestions?
Printer = Dell 1760NW
Both the printer and the Time machine are showing 'green lights'
thanks in advance

Regarding the printer:
From: sterling r: https://discussions.apple.com/thread/5506493?tstart=0
If that does not help then from braden85:
This first article is about changing or updating printer software in Mountain Lion, and can be found here:
OS X Mountain Lion: Change or update printer software
http://support.apple.com/kb/PH10622
This next article tells you where to find the printer software for your specific printer brand:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/ht3669

Since upgrading to Yosemite I can no longer receive e-mail on my Mac or Macbook air but can on my I-pad. Is there a fix in the works?

My I-mac and Macbook air will not receive e-mail since installing Yosemite but I can still get e-mail on my I-pad. I have verified with my ISP that everything is working correctly on their end. Message by Inbox says Mail cannot send password securely to the server. Any fixes?

Hi olejim51,
Thanks for visiting Apple Support Communities.
It sounds like you're not able to connect to your ISPs mail server on your iMac or MacBook Air.
There could be several causes of the error message you're seeing. I would start with the steps in the "Mail Connection Doctor shows one or more red dots in the account Status column" section of this article to troubleshoot the message:
OS X Mail: Troubleshooting sending and receiving email messages
This article contains a variety of steps that can help resolve an issue like the one you're seeing.
All the best,
Jeremy

Since upgrading to IOS8 i can no longer open any email attachements. The usual view only tells me witch kind of document is attached. If i say open in dropbox or an other programm, nothing happens

Guess the title should tell everything. It always worked, since update cant open attachements

Similar problem here. My Ical refuses to edit or delete events. Viewing is possible, though sometimes the whole screen turns grey. Adding new events from mail is still possible. The task-pane completely disappeared. My local apple technic-centre messed about with disk utility for a bit and than told me to reinstall leopard. I could of course do that, but it seems to me that reinstalling Leopard just to fix iCal events is a bit invasive.
I tried also tried removing everything, installing a new copy of iCal from the leopard-cd, software updates, all to no avail.
At the moment I'm open to all suggestions that do not include a complete leopard reinstall.

Since upgrading to Mavericks, I can no longer connect to my Bose Sounddock 10 via Bluetooth. It was fine under Mountain Lion

Pairing my Bose Sounddock 10 to my Macbook Pro (early 2011) via Bluetooth was fine under Mountain Lion. After installing Mavericks, connection failed. I deleted the Sounddock & attempted to pair it again. I get an occasional 'flash' in the 'Devices' list, but no pairing occurs.
I have no issue pairing the Sounddock to my iPad running iOS 7.0.3.
Has Bluetooth been changed for Mavericks?
Is anyone else experiencing similar issues?

I actually have the same problem, since I upgraded to Mavericks my MacBook Pro can't seem to find the Bose sounddock 10. Has anyone found a solution to this.
It still works with the iPhone 5
Thank you

Since upgrading to Lion, I can no longer view my previews in Aperture.

Since I updated to Lion, Aperture has been sluggish and annoying and keeps quitting on me...
However, the worst problem I have is that I cannot view the previews of most of my photos.
The files are all referenced and kept on an external hard drive.
I have checked to see if the preview files are in the Aperture library folder in my Pictures file (I looked in Show Contents...) and they all seem to be there.
When I open the projects in Aperture, the outline of the photos appear, but I can't see the images.
Does anyone have any idea why this would be and how to fix it?
Thanks!

As a start you should update your profile it still says you are using 10.6.1 and including the Aperture version would be a good thing also. So have you upgraded to 3.2.1 yet? If not you should.
As a start you should look at Aperture 3: Troubleshooting Basics and see i that helps.
Post back
regards

Since upgrading to Mavericks, I can no longer share my documents via email. It never gets to the mail page. Any ideas?

Once I upgrades to Mavericks, I first had trouble viewing my old documents saved in iCloud. Apple Support phone call solved this. Now I notice I cannot share any of my documents/pages via email. It never gets past the "next" page for sharing via email. Anyone with same problem?

I actually have the same problem, since I upgraded to Mavericks my MacBook Pro can't seem to find the Bose sounddock 10. Has anyone found a solution to this.
It still works with the iPhone 5
Thank you

Since upgrading to Lion, I can no longer talk to my windows network

I have upgraded to LIon and had not encountered any problems until yesterday when my remote printer on a windows pc refused to print. Whilst the mac book sees the network, workgroup and pc (NetBios name) it will not connect to it.
Has anybody seen this before?

chief8451 wrote:
Has anybody seen this before?
yes.
my Lion machines, too, won't connect to my winsloth computer. luckily, i still have a MBP running Snow Leopard ...

Since upgrading toFirefox 4, I can no longer return to my e-mail message from an on-line attachment without shutting down the browser since there is no "close tab" option

Similar Messages

Maybe you are looking for