Since Win8.1 update NVIDIA control panel is not working

Since updating op system to Win 8.1, I am not able to get into the Nvidea control panel. I get a message that no displays are connected. I have got the Nvidea card as my primary source for the monitor.
Help appreciated.

I guess you read the step by step instruction how to update the system from Win 8 to Win 8.1
Did you? Did you follow such instruction?
Did you update and install the essential nVidia driver for Win 8.1 which is available on Toshiba driver website?
If not, do that!

Similar Messages

Windows Update from COntrol Panel does not work??

Hello,
regardless if it is common way to do so or not: Does anyone have experience with the "Windows Update" functions in WE8S?
I tried them upon a customers request, and I've seen that I could not get it to complete successfully when choosing the option in
Control Panel. It either hanged during "Downloading..." or at the "Preparing to install..." screen - I waited for many hours. But when I using the "Windows Update"
app from the start screen, updates were installed without any problems (OK, 1 has failed, but the process has completed). Of course, both methods have different look, maybe it is not the
same...
As per Sean Limings' book it is no good idea to update systems in the field this way - shall I remove the functions from the system? What are you doing?
Thanks,
Willi K.

Maybe it was because of the number of updates (in my case there were 85 updates pending). After I succeeded installing via the "Windows Update" app from "Start Menu", there where two more updates, and update now worked when called from
control panel (at least one of them, KB2973201 still stolidly fails to install).

Beats Audio Control Panel software not working after Windows 10 upgrade.

Beats Audio Control Panel software not working after Windows 10 upgrade. the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device? IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

Beware: icloud control panel DOES NOT WORK for icloud email

Opposing evidence is welcome. Please comment.
After dozens of hours, emails and chat sessions with both MS and Apple tech support (the latter escalated as high as it could go - "after this we have to refer you to engineering"), I was finally told by Apple Senior Advisor Ciara Ferguson that icloud control panel does not properly sync icloud mail with Outlook 365 (Outlook 2013). After several months of working on dual systems I discovered that many (but not all) changes to folder names and filing of emails in various folders made in Outlook were not reflected on icloud and vice versa. Ms. Ferguson has stated that icloud control panel "works better with calendar and contacts." Obviously, this non-committal statement is grossly insufficient. It either works or it doesn't. It doesn't.
Allegedly, icloud control panel does work to sync other email (the example of an outlook.com email address was given) into apple devices. This doesn't sound right to me either, since one can just add any POP or IMAP or Exchange account into a Mac device, so why would one need icloud control panel to interface?
I remain stymied as to the actual purpose of icloud control panel, despite asking exactly that question of Ms. Ferguson on several occasions. The Apple literature and its own setup screens suggest that it will sync email, contacts, calendar and notes with MS Outlook, but as to email, that is apparently untrue.

I don't think so. I'd like to sync photostream from two iPhones with distinct Apple IDs on our PCs and I don't see a way to do it. It synced my wife's iPhone while she was logged in to iCloud control panel but not mine until I logged in (and disconnected her photostream PC syncing).

Notifications and control panel do not work on either the app screen or home screen

On my home screen and in apps, I can not swipe up or down to release the notifications or control panel. It has worked earlier today, however not any more.
I can, however, access them in the lock screen, andin settings, they are allows to open in apps. It should always allow me to access them in the home screen though, so I do not know what has happened.
What do I have to do to access the control panel in the home screen, and why is it like this?

Do you have a screen protector or case that would interfere with swiping?
If so remove them as a test.
Otherwise:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Icloud control panel photostream not working on windows

Using windows 7 i set up photostream to hsare the photos taken on my iphone/ipad. all worked for a while, but, have stopped now. Photo are not loading onto the PC. When i go to the control panel I also note the options buttom beside photostream is inactive (meaning i cannot check what folders have been set up). I suspect this came about during an update of versions as all was previosuly working just fine.

Greeting!
This message will show up when the printer receive the print job, tried 3 times but fail to pick up the paper.
To clear this message, you might need to
1. disconnect your printer from PC
2. restart(power cycle) the printer
3. obserb the printer status and let me know. if the printer give ready status, restart your pc and connect back the printer to PC.
Although I am an HP employee, I am speaking for myself and not for HP.
Say "Thanks" by clicking the thumbs up in the post that helped you.

Since last software update, pre-paid internet does not work anymore. Get "you have not signed up for a data plan" message. Pre-paid acct is in order! What's up???

I have had an iPad 3G for more than a year now. I did not get it with a SIM card, since I expected to use almost completely at home, where we have wireless internet. Eventually, I decided it would be handy to be able to take it on the road, and signed up for pre-paid Internet with KPN (national Dutch telecommunications company). That worked fine, until the last big iPad software update. Since then, whenever I try to make a connection outside the house, I get the following message…
Mobile Data Account
You have not signed up for a data plan.
Would you like to set up a new account?
If you don’t, you can do it later in Settings.
…with the options of ‘Later’ or ‘Now’ to press. If I press Now, I get a screen “Please wait while the page is loading – this should only take a few seconds to complete.” But it never does, the ball just keeps spinning and spinning and spinning….
To my mind, with pre-paid internet I should not HAVE to set up a Mobile Data Account in the first place. I’ve checked with KPN, and my account is completely in order. I’ve checked with the local Apple store, and the geniuses say they’ve never seen this. Can anyone help me?

I updated to 3.6.4 and when I went to NetFlix to watch the next show of a series, it said
something like
Installation complete, restart your browser.
I restarted browser, same problem. Restarted comp. Same problem.
I updated Adobe Flash 10.1, still same problem.
But able to watch some vids on other sites, but full screen gave me the big blank white screen with audio only, had to click around in the dark ( so to speak) to find the minimize button.
I did a System Restore to before the Firefox and Adobe updates.
I then did not update Firefox as recommended and went to NetFlix and wellah, i can view the movies again.
And Full Screen is fine.
I then experimented and updated Firefox only, went to NetFlix and got same msg with no viewable shows.
So did a System Restore once more.
Staying at 3.6.3 for a while longer until I know I can watch my movies.
I don't own a TV, so this is my only form of an occasional escape.
I do hope this is figured out soon.
With what I have done, it seems to be Firefox, Not Flash.
Good Luck to us all.

Since the last update of iTunes genius will not work it updates but nothing else

since Itunes last update I can not get genius to work, it updates but when i click on start genius nothing happens, i am verily new to this so i am not sure what to do, it did work great before this update. i now have a new ipad mini and would love to have this working.

Hi there navicin79,
You may find the troubleshooting steps in the articles below helpful. The first thing I would try is reinstalling iTunes as outlined in the first article.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
-Griff W.

Since my iPad updated inSeptember, my iCloud will not work. It tells me that I must accept the new Terms and Conditions, then says that iPad cannot access Terms and Conditions.....

Since updating my iPad in September, I have not been able to access iCloud. It wants me to review Terms and Conditions, then says that it cannot connect to the server...

Welcome to the Apple Community.
Please try the following...
Go to Settings > iCloud > Delete Account (This removes your data from your device, but not from your account, it will be added back later).
Restart the device.
Sign in again (Settings > iCloud, don't use the 'Create New Apple ID' button).

Since the latest update the volume keys do not work

The volume keys (F10 F11 F12) quit working after the latest software update. How do I get them working again?

The whole status bar was redesigned, so now you use the area to the left of the address (green, blue, or plain) to check whether the site is secure.
[https://support.mozilla.com/en-US/kb/Site%20Identity%20Button Site Identity Button | How to | Firefox Help]
Other discussions about this change mention an add-on you can use if you really prefer seeing a lock:
[http://support.mozilla.com/en-US/questions/796225 firefox 4 where is the padlock bottom right corner | Firefox Support Forum | Firefox Help]

Officejet J3680 Control Panel does not respond to buttons, just make "beep sound"

Hi everybody, thanks for reading.
The problem is that my (brand new) J3680 control panel does not work until I press all the buttons, yes its weird.
Note #1: The printer works perfect when used through the computer (I am Linux user).
Note #2: Once I have pressed all the buttons at control panel the control panel (kind of) works.
Heres how this happens:
I plug the power cord
Now, the printers start and not even the Power button works, so I cant turn it off, each time I press any button it just do a “beep sound” and the LCD screen keeps the same
The LCD shows this:
0 Speed Dial
<One-Touch 1>
Now I have figured out what the LCD screen initialization means:
0: Thats the times I have pressed the “Speed Dial” button
Speed Dial: Thats the button I have to press to make the Control Panel works
<One-Touch 1>: This is the next button I have to press after the “Speed Dial” has been pressed
The printer then makes me press all the buttons (...)
I think this is kind of some “Control Panel button calibration", because the LCD respond perfect when I press the button the printer ask
The other problem is that I don't know how to finish this calibration or whatever this is, because I reach a point where I cant find the button it ask
The LCD ends showing:
1 Color Start
<Hidden 1+Black>
Where “1 Color Start” was the last button it asked me to press, and the <Hidden 1+Black> is the next one combination.
Note that “Hidden 1” is not “1” not “Speed Dial 1”, I have just tried that combinations, but does not work.
Please help I have to do this each time I turn on the printer to make the control panel work. Thanks a lot.
Message Edited by NxGTR on 08-14-2009 07:15 AM

Nao Consigo estalar impressoura HP Officejet J3680 Faz horas que estu tentando estalar nao sei se esuporte ou provedor gostaria muito de ajuda para italar. obrigado Rui

Quad SLI option not available in Nvidia Control Panel after complete reformat

I had a SSD failure on this new build in Raid 0. Before I RMA'd the HD I went with one HD and was able to get Quad SLI running. Now after going Raid 0 with the new HD I had to reformat and I reloaded the OS and then updated all the drivers. Now I no longer get the option for Quad SLI even though my cards are seen by the device manager and the NCP. I can only go SLI on one card and can dedicate a GPU on the second card to Physx. I used the uninstall feature for each driver last night and then restarted in Safe Mode and used driver sweeper to clean out any remnants. I then rolled back to an earlier nvidia driver on the 500 series with no luck. I installed Live Update but did not use it except to scan my system. It shows the latest Bios so that has not changed since. I also made sure that I was using the latest Realtek drivers. Any help will be appreciated.
MSI P67A-GD65 (B3) latest Bios
Win7 64bit Home Premimum SP1
2 EVGA GTX 590 Classifieds
16g 1600 Corsair Vengence
2 ea SSD 120g Corsair Force GT's Raid 0
Antec 1200W HC gold PS
Coolemaster HAF X Case
Corsair H100 H2O

NO i was not able to get windows to load. I would have an intermittant SSD failure at diferent points during the installation process. I went to a single drive and it installed fine and after completion I downloaded updated drivers and went into the nvidia control panel and activated quad sli. I did have to remove one of the cards during the SSD install in order to facilitate the installation of the Sata cable into the MB. It is possible that the SLI bridge may have gone bad since it was disturbed. I ordered another one to be sure and it will arrive today. While waiting I switched the video cards in their slots to check them and I also verified that the PCI slots are good. Is there some history of a conflict between Raid 0 and 4 way SLI that I should be aware of?

NVIDIA CONTROL PANEL APPLICATION HAS STOPPED WORKING

I have got a big problem here with NVIDIA cards and have not been luck at all. My problem started when I had a clean install of Vista 32 on my HP XW6600 which came with Windows XP installed with an option to upgrade to Vista. When I upgraded I also upgraded my GPU from GT 9500 to Quadro FX1700. When I tried to open the control panel all I got was an error message saying it has stopped working. I never had this problem in XP with the 9500GT.
I later sold the quadro and purchased the Geforce GTX260 and had a clean install of Vista 64 on my system. But still this nvidia control panel cannot be opened. I am a professional video editor and needs the advantage of two monitors when running Adobe Premiere PRO CS4. I have seen some forums which says uninstall all nvidia drivers, use CC cleaner or Drivesweeper, in safe mode and reload the Nvidia drivers once again. but all this have failed.
My patience is running out now and I am now considering switching to ATI cards. I wanted to take full advantage of cuda with nvidia and was looking foward to purchase a quadro 5600 for maximum added perfomance. I have just ordered a second monitor from DABS.COM which I intend to hook up with my system and without accessing the Nvidia control Panel I will be in trouble.
Am I missing something here. PLEASE tell me know if you have got an idea on how to resolve this. I have attached a screenshot of the error message I get.
System
HP XW6600 Vista 64
Quad Xeon 5420 2.5ghz
250 GB C drive
750 GB D drive
1.5 TB Raid 1
GTX 260
4GB RAM
ADOBE CS4 Production Premium

"It has to be that HP thing"
Bill what is this HP thing. Could you expand on that please because I have just completed a clean install using HP RESTORE plus disc and my drive was completely wiped out. Not even Windows OLD files were left.
I then installed the drivers using the Original CD that came with the GPU, still the problem remains. I updated the driver using the internet and it didn't help neither. I have also purchased an Intensity PRO editing card and expecting a 22" HD monitor thhis morning for HD editing.
I think ATI is the way forwad. Which is the best ATI card for HD editing. Budget maximum GBP£150.
YOUR HELP WILL BE GREATLY APPRECIATED.

My nvidia control panel dissapeared from mac pro

My nvidia control panel dissapeared from early 2008 mac pro running 10.6.7 osx snow leopard with a NVIDIA GeForce 8800 GT graphics card.I have tried reinstalling the driver from the nvidia website,time machine,and software updates.Nothing seems to bring it back. Solutions anyone?

Hi Jack,
Yes the GT120 will work with the DVI port but the mini-displayport will not function on the card so you'll be limited to using one display. The handy thing with adding a GT120 to a 2008 Xserve is you can use it for compressor if you want to, to render videos.
Best
Beatle

Nvidia control panel for gtx680mx on iMac

Hi,
I baught the late 2012 iMac and was wondering if Apple provides the all features/software for the NVIDIA GTX680MX that it comes with. When NVIDIA drivers are installed on the PC, the drivers that are installed on the system have the NVIDIA Control panel and the settings specific to the video card to tweek the video settings. I dont see them on the system prefrences or anywhare. I do not see any Mac/OS X drivers on NVIDIA'swebsite either.
Cheers,
Sameer Jaffer

NVIDIA drivers are included with OS X, and Apple updates them with every maintenance updates. Those drivers don't include the NVIDIA Control Panel, as it happens in Windows, and there isn't a NVIDIA Control Panel for OS X

Since Win8.1 update NVIDIA control panel is not working

Similar Messages

Maybe you are looking for