Sincing MacBook Pro with TV
Recently bought a Flat Screen HD LED Smart TV. Want to sinc MacBook Pro to it for presentation purposes. Have a HDMI cable connected and worked with costco tv service for an hour to try and sinc and get the resolution to match up. Any ideas out there would be great!
Welcome to Apple Support Communities
You have to get a Mini DisplayPort to DVI adapter and a DVI cable > http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adaptor?fnode =51 Unfortunately, you can't use the Mini DisplayPort to HDMI adapter to connect to a TV with DVI
Similar Messages
-
I have a MacBook Pro Late 2011 and I'm wondering if I install Windows 7 Ultimate to this MacBook Pro with this Full Retail Version. And if so, which bit to use either 32-bit or 64-bit since I have both disks.
64 bit.
32 bit won't use all your computer's ram.
64 bit allows you to run 32 bit programs
Your computer is 64 bit
New programs use 64 bit.
There is no reason to use the 32 bit version of Windows. -
i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?
My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck! -
Hi! is it possible that Logic X has upgrades that work only with mavericks and does t work in mountain lion....since in my macbook pro with mavericks i have new views of the equalizer, etc and in my mac pro with mountain lion it still the old view...
Any OS version of 10.8.4 or later has all features that are not OS depended. The plugins are one example. You probably haven't updated all versions of Logic Pro X to the latest one.
-
IPhone: My IPhone 3GS is with iOS 5.1.1. . I have activated ICloud for Notes (And location of my IPhone only). My Notes are subsequently classified in two groups "ICloud" and "My IPhone".
Macbook pro: I do not succeed to activate ICloud for Notes on my macbook pro with OS 10.8.. WHen I tip on Notes for its activation with ICloud have a message that everytimes tells me - after several seconds - to try later !
I generally synchronize both via ITunes (wifi). There is no longuer any option to synchronize Notes.
Subsequently I can no longuer synchronize my Notes. Could you help me ? Is there any other way than by using ICloud (which I am not so much a fun) ?
ThanksEven today, 21st Century and all, printing on Unix systems can be somewhat of a black art, and every so often a gremlin or two crawl out of the woodwork. Purging all can make sure no damaged pointers or corrupted caches linger on to make life miserable.
Glad you're peachy now. -
Should I get a 13" or 15" Macbook Pro with retina laptop?
I, FINALLY, after one year of wanting to get a new laptop to use as my primary computer replacing my desktop computer at home.........have decided to switch gears from a Windows computer to a MACBOOK PRO with RETINA laptop. It's not an easy decision when you are spending SO much money on something you hope will last a long time as I do NOT plan on getting a new laptop once I buy this one for a very long time (until it breaks / can no longer function)!
My dilemma now is whether to go with the high end 13" Macbook Pro OR get a similar if not higher end 15" Macbook Pro. Here's background on myself and what I plan on using the laptop for:
I plan on using it as my new primary computer for home so primarily for my personal use, but I will be using it also for work so I will be using it for basically EVERYTHING!
I will use it to do word processing (MS Word), to do my finances (reconcile my bank stmts/accounts), using MS Excel for accounting work, check my emails, research the Internet, photo editing (pretty much basic, definitely not advanced) and creating slideshows with my photos/music, downloading/playing music. I do not plan on using it to play any games.
I use alot of MS Office / Excel and some Powerpoint - either for work or home.
I need alot of storage space for photos (recreational - up to 400 per vacation trip) and I plan on creating slideshows with the photos using Apple's great photo/video/slideshow apps! At last count, I had about 100GB of photo files.
I also need alot of storage for my music files - I have @ least 12GB of music right now and am always downloading more each year.
I plan on taking it with me outside of home only on the weekends for the most part like to a cafe (Starbucks) or library, but not for anything further than that (not for travel as I will just take my ipad).
I know it's only ~1lb difference in weight, but a couple of my concerns is since it will be my primary home computer (i.e.I'll be using it in the evenings/on the weekends and probably more (since it's an Apple!) to work on photos/slideshows, if the screen size difference will matter in the longrun in terms of having any impact on my vision (not sure if the 2" will make a difference in that). I'm only 45yo, but I do worry about that! I tried both the 13" and 15" in the Apple store and the only difference I saw was that the 15" screen allowed you to have multiple programs visible on the screen side by side, but viewing the actual programs was the same (in size). I don't really view programs side by side right now (I use the ALT-TAB shortcut alot to view multiple programs I have open at once), but I could see how having programs viewable side by side could come in handy.
I had a Toshiba 17" laptop before that was too HEAVY to lug around even if on the weekend so I no longer want a heavy laptop and want something more portable to take with me on my weekend excursions to the local cafe/library which basically means going from home to car and car to location at most, but when I go to use the restroom, I like to take it with me (do not feel safe leaving it behind on table) so I don't want it too heavy.
I do plan on getting me a Western Digital external hard drive to backup ALL my files yet since I plan on keeping the computer for as long as it'll hold up, I want to make sure I have alot of storage to keep up with me. I like the flashdrive component because there are fewer moving parts so less likely to have problems in the long run and given that (despite my need for alot of storage), I'll backup my photos/music to external drives should I end up maxing out on my storage.
I value your opinions, please help me DECIDE!!!!! I'm frustrated and it's driving me nuts!!! I know it's too much to ask, but if they had a 14", I would probably go with it! A 2" difference seems pretty big. :-)
THANK YOU!!!Thanks guys. I'm set on the 15" now and am now deciding on whether I should go with the standard MBP or the MBP with retina display? I'm not an advanced photographer, but I do like to take alot of photos especially when travelling and I do plan on creating slideshows with my photos synched with music. I don't think I'd be one to really be able to tell the difference between a retina vs. non-retina screen given that since I can't really tell the difference between a tv screen with vs. without HD. So for me, I don't think it'd be about the retina display at all. It is more about the storage capacity AND the fact that I hear with the retina/flash storage, that there are less apt to have problems down the road so a more sturdy a machine. Given I take alot of photos/will be creating slideshows wth my photos, and downloading/playing music, I'm thinking the standard MBP might be better storage-wise. But also given I plan on keeping this laptop for a long time (basically, until it breaks or becomes too slow to function productively), that makes me want to go the retina/flash storage route. SIGH.
Should I not be so concerned about the longevity of the machine, but rather opt for the one with more storage? -
How can I disable the internal display on my MacBook Pro with connected external display?
I used this metod with the MagSafe power cable connected (see http://osxdaily.com/2012/06/15/yet-another-way-to-turn-off-internal-lcd-display- of-macbook-pro-with-lid-open/).
Open System Preferences and click “Mission Control”, then click on “Hot Corners”
Select a hot corner and pull down the menu to select “Put Display to Sleep”
Now connect the external display to the Mac and move the cursor to the newly created sleep corner to turn off the internal display
Close the MacBook lid and wait a few seconds before opening the lid again, the internal display should stay off while the external display will be powered on
This worked great under Mac OS X 10.7.4, but after the last update to 10.7.5 it doesn’t work more. The built-in display turns off really, but a few seconds after opening the lid it lights up again. Do you have any suggestions? Dimming the brightness or clamshell mode is not very useful.
MacBook Pro 13-inch,
2,7 GHz Intel Core i7,
Mac OS X Lion 10.7.5 (11G56)
Thanks!I have the same problem: not able to work with my external display mirroring the internal one - while shutting the internal display off.
I believe there is an issue with Mac OS X Lion 7.5 that Apple needs to solve, since apparently it does not happen with this version of the OS only...
https://discussions.apple.com/thread/4315808?start=45&tstart=0
Or any other way to solve it?
Mac Book Air, 13-inch Mid 2011
Mac OS X Lion 10.7.5 11G63
Thank you! -
Connect MacBook Pro with Mini DisplayPort to TV?
I have a 15" MacBook Pro with the Mini DisplayPort outlet. I used to have a PowerBook which I was able to connect to my TV via the video adapter. No such adapter is included with my MacBook. How can I connect it to my TV to view videos, movies, tv shows, etcetera?
You only need a cable from MBP to Display, i.e. Mini DisplayPort Male to HDMI Male Cable
Link: http://www.cablematters.com/pc-30-30-gold-plated-mini-displayport-male-to-hdmi-m ale-6-feet-cable.aspx
It's only $9.95.
But you know, until now Mini DisplayPort can not output audio but only video. As far as I know Cable Matters Inc. has solution for audio output.If you want high audio quality Mini Displayport Male and Toslink Audio/USB Male to HDMI Female Adapter is good for you since it supports 5.1 Channel audio.
Link: http://www.cablematters.com/pc-56-26-mini-displayport-male-and-toslink-audiousb- male-to-hdmi-female-adapter.aspx
The price is $47.95, a little expensive. You will need another HDMI to HDMI cable from this adapter to the TV/Screen.
If you don't require high quality audio this is an alternative Mini DisplayPort Male and USB Male Audio to HDMI Female Adapter.
Link: http://www.cablematters.com/pc-24-32-mini-displayport-male-and-usb-male-audio-to -hdmi-female-adapter.aspx
The price is cheaper for $37.49. You will also need an HDMI to HDMI cable from this adapter to your TV/Screen. -
It's driving me crazy; I have a firewire, but it isn't compatible with the ports on the new macbook pro with retina display.
Thanks for your help!hanskra wrote:
I wish to know from Apple,
These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily. No one here works for Apple nor does Apple get involved in responding.
You can either contact Apple Care since you are still under warranty or click on the "Contact Us" link at the bottom of this website. -
Macbook Pro with Retina wont detect monitor on mini display port to dual-link dvi adapter
So after reading Jeff Atwood's post, I decided to jump and give it a shot. So this week I got my monitor in from Korea, and I already had my Apple mini display port to dual-link dvi adapter, hooked everything up - and nothing. Monitor doesnt show a signal, and no display shows up in user preferences.
To verify the monitor actually works, i plugged it into my windows box - and boom, right away there it is in all its glory. So I called apple support, after spending about an hour going through the "are you sure its plugged in stuff", the tech finally admitted to being stumped and blamed the adapter. Not to be deterred, I then went to my local apple store and talked them into trying their adapter to rule out the adapter - regardless of the adapter, the mbp wont detect the monitor.
Just for fun, i tried my old single mini displayport to single dvi, the monitor is recognized, but that obviously cant drive the right resolution, so i just get a backlight. Same deal when i try the hdmi port with a hdmi to dual-link dvi adapter on the end of it. Also tried display port to the same hdmi with adapter on it (the joys of working in a dev shop - cables to test everywhere)
I have read / tried a ton of things:
re-installed / uninstalled air display, just to be sure it was gone. went through all my apps just to see if there is anything like this i could think would be effecting it
install gfxCardStatus to ensure i am on the nvidia (discrete) and not the internal card
Played with different settings on SwitchResX to try to force the res over hdmi - no love - os rejected each one
I bought the monoprice adapter wondering if it was just the apple adapter since the apple adapter has been panned, no love from it either
Reset the PRAM countless times
I have two other adapters coming in to test with in a day or two - maybe one of those will be magic, but at this point i kinda think its software on the mac. My Spec:
I am running Mountain Lion with all the latest updates
New MBP with Retina (2.6g processor, 16gig ram, nvidia video card)
Here is the ebay link to the monitor
Now the other weird thing is pretty much universally these auctions say the monitors cant be run on a laptop - which makes no sense to me, because its just a connection, if the video card is strong enough (which my machine better be) it shouldnt matter the source. The listing mentions its a "by-pass" monitor, which is something I and google have never heard of.
So any sage words to make my day?Magic was, I have to have the adpter plugged into the mac, let it recognize all with the monitor powered off.
then power on the monitor, and boom gloriousness
For future generations, setup that works:
1) MacBook Pro with Retina
2) Monitor From Korea (example auction)
3) Accell Mini DisplayPort to Dual-Link DVI Active adapter (amazon)
4) Boot mac, plug in adapter, let it recognize the monitor, power on monitor -
Since purchasing a new iPhone 5 and macbook pro with retina display I have decided to keep the iPhone 5 for phone contacts only, and the macbook for email contacts only .. Is there a way for me to keep these as they are recorded on each apple product when I sync with iTunes as it has changed my iPhone and put in email contacts and thus deleted iPhone phone contacts once when I syncd thanks appreciate any help
To prevent your iPhone from automatically syncing when you plug it in, click on iTunes in the menu bar, then preferences, then "devices", then tick "prevent iPhones, iPad's and iPod's from syncing automatically".
Plug it in, then on the iPhone sync summary screen, click "info" along the top.
Make sure the "sync contacts" option is not ticked. as long as it's not ticked, then it won't sync with your mac's contacts but will still include them in backups.
Also, if you use iCloud, make sure that the iPhone/mac are either not signed into the same account, or that "contacts" is not turned on for both of them -
As is said my HP w2207h monitor is not working with a minidisplayport to hdmi adapter and a hdmi cable which is working fine for my PS3. So the cable is not the problem. And on my TV i also have no problems at all activating a second monitor. Therefore the adapter isnt the problem either. When i plug it in the typical bluescreen appears. Then after a few seconds it appears again and there is no second monitor recognized. I also used the "recognize Monitor" button without success. Please help me, are there any special drivers or something like that ?
PS: bought a high end expensive adapter now because the old one was very cheap. But didnt help. Still stuck on the macbook not recognizing anything !If you have an external drive you can hook up to the MacBook Pro I believe there *may* be a solution by getting an image to the MacBook Air.
On the MacBook Pro with the Windows install disk in the DVD drive fire up disk utility. Select the DVD and then hit the "New Image" button. Disk Utility should offer to create a disk image from the DVD. I would put that disk image on a USB drive connected to the Pro. You should be able to mount that image when you connect up to the Air. Hopefully BootCamp will be able to access that all through the process.
If that doesn't work (the drivers don't recognize the disk image once Windows gets underway for its install), you might try copying the installation files from the DVD to FAT32 formatted USB stick or drive and then using that to install Windows. I would expect Windows would be able to see the USB FAT32 drive and I don't believe any file on the drive is going to go beyond 4GB.
I haven't actually tried BootCamp on the Air, since I just use VMWare which has no issue installing from anything OSX can see. But BootCamp is going to eventually hand off operations to Windows and that's going to complicate matters--Windows has to be able to see the drive. While I believe there are drivers that let Windows connect to that drive, there's no way to authenticate (or even load the drivers I expect) before Windows itself is loaded--so it's a "chicken/egg" problem. -
Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?
If you look at the User Tips tab, you will find a write up on just this subject:
https://discussions.apple.com/docs/DOC-4053
The subject of buying/selling a Mac is quite complicated. Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
SELLING A MAC A
Internet Recovery, and Transferability of OS & iLife Apps
Selling an Old Mac:
• When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
• Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
Internet Recovery:
• In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
• Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
iLife Apps:
• When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
• Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
• It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
SELLING A MAC B
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License. -
How Can i connect using Thunderbolt a Macbook Pro with the New iMac
I bought the new Macbook Pro with Thunderbolt and instead of buying a new external monitor, i am thinking that the new iMac with Thunderbolt is a great idea.
Is there a cable to connect the Macbook Pro and use as iMac as external monitor, using Thunderbolt.
thanksI understood your question perfectly and the answer is absolutely yes. When you change the iMac into target display mode you underlying operating system continues to run all existing applications. For example in my case if I finished editing some video and am about to enter a lengthy render process or something which may draw lots of resources like hand real, I set it to start on the iMac and then switch it to target display mode to use it as a monitor with my MacBook air in the meantime.
Only one small caveat in your case though. Since the target display mode is a feature of OSX (eg the OS interprets the special key stroke and changes the iMac into target display mode) you should make sure Lion server supports the target display mode feature. I don't see a reason why it wouldn't but that's the only thing currently crossing my mind. Keep in mind the compatibilities between ports as noted in my blog. If any of your machines have mini display port and you intend to connect the new iMac in target display mode you will run into issues. In that special scenario, I recommend buying a refurb iMac from 2010 which urtilize the displayport allowing you to use it as a display for all your macs -- those with thunderbolt as well as those with displayport. If you have thunderbolts then definitely go with the thunderbolt iMac. -
MacBook Pro with Retina 13" Late 2013 thunderbolt port broken after 10.9.4 update
One of Thunderbolt Port (near USB port) was broken after 10.9.4 update.
I usually use mini Display Port to Display Port cable to connect my external screen, it works fine before 10.9.4 update. After 10.9.4 update, I tried to connect the external screen with the same cable, and the main screen of my MacBook Pro with Retina Display twinkling once so I'm sure the external screen was identified, but no video signal output.
I went to local Apple Premium Reseller (there is no Apple Store in Taiwan) and the they told me all of Thunderbolt Port was fine, they test with their own 10.9.2 copy and it seems ok. After that, I tried to re-install 10.9.4, downloading directly from Apple, the system re-install progress was complete but the Thunderbolt Port issue still there.
I connect to the broken Thunderbolt Port with Thunderbolt to Ethernet adapter, and it works fine, so I believe the only problem is that there is no video signal output from the Thunderbolt Port (near USB port one).
What should I do now?
Model: MacBook Pro with Retina 13" Late 2013I can confirm that problem, too: Im' working with a Dell U2713HM display, connected via display port. Since 10.9.4 Update i'm experiencing random black screens and/or display going to energy saving mode. Today i've had this issue twice: Display going black and after disconnecting the macbook von all cables screen of the macbook remaining black. Holding Power Button for about 10 s restarts the macbook. After 5 minutes the same problem appeared again.
Maybe you are looking for
-
Ipod cannot be read from or written to
what does this mean? is this why my shuffle will not play
-
Error when downloading itunes purchases
When I go to download from the iTunes store the downloading bar keeps restarting over and over again and then I get this message. Anyone what is going on? I tried several times to redownload and no sucess.
-
Mixed content (4:3 and 16:9) on same DVD
I'm working on a DVD that contains both 4:3 and 16:9 videos. The main feature is 4:3, but some bonus features are 16:9 so I'd like them to play back in 16:9 on widescreen TVs. How should I configure and prepare the DVD (4:3 or 16:9, iDVD or Toast)? M
-
Why is the font so small on my Comcast email inbox
When I open up my email the font is ok but when I open up view entire box it opens up as normal but the font is so small I can not read it with a magnifying glass
-
just wondering it 500gb and from western digital