Singal Strengh

I called AT&T yesterday & she couldn't find a 3G problem in my area. Does anyone have the problem with the singal bars going UP & DOWN all the time (even on my WIFI it happens). Will a software fix that when Apple releases a update? I didn't notice it on 3.1.3
Message was edited by: Firsteveripod

Since the beginning of time (at lease in cell phone time) signals go up and down constantly. Every phone I have ever had and that's more than twenty of them with the same carrier have all done that even if if I leave it lying flat on a table outdoors. AT&T is only going to have a problem notification if they have a cell tower "down" for a period of time. They don't consider fluctuating signal strength as an issue to report.

Similar Messages

  • How do i make my mac choose wireless networks based on signal strengh

    i have a MBP, the newest one and i was wondering of there was a way to make it conect to different wireless networks depending on signal strengh. this is because it being a laptop it moves around the house and as we have several routers sometimes it connects to one that is very far away even when it is next to another. if anyone has a solution it wuld be mych appreciated.
    Thanks
    Anthony

    Hi,
    According to the specifications here, the MBR1000 router has four LAN ports. Any G3 model has built-in Ethernet (an RJ-45 port). This means that you should be able to establish at least a wired connection.
    A DSL modem (if it has Ethernet output) would be connected to the WAN port of the router. Apparently, the router in question is capable of using a 3G mobile broadband (USB or ExpressCard) modem as an alternative Internet source.
    For a (local) Wi-Fi connection between computer and router, you could connect a wireless Ethernet bridge (also known as a gaming adapter) to the G3's Ethernet port. Wireless Ethernet bridge examples include D-Link DWL-G820, Linksys WET54G and Linksys WGA600N. These devices do not require special drivers, and can thus be used under almost any operating system.
    Jan

  • The difference of sinad.vi between Sound & Vibration Toolkit and Singal Processing Toolkit

    Hi, I'm confused with the the difference of sinad.vi between Sound & Vibration Toolkit and Singal Processing Toolkit.
    When the input waveform is single tone, the output is almost the same, but raises much discrepancy while a certain distribution of the spectrum. Does the sinad.vi have some limitation to the input signal? Did I miss some setting of the terminals? Hope someone can give me some suggestion.
    Attachments:
    SINAD(Front).png ‏85 KB
    SINAD(Block).png ‏77 KB

    Hi, here's the subVI for the test! Hope someone can give me some suggestion.
    Attachments:
    SINAD.vi ‏96 KB

  • How to add two series data in singal xy graphs in excel through labview

    Hi,
    I am trying to generate excel report and needs to plot XY graph in excel sheet. Using excel insert graph VI I am able to pass the data to excel and generate the XY graph (one x axis and many y axis), but I am not able to add a series in the graph that means not able to plot two XY plot in same graph (for example two plot X1Y1 and X2Y2 on same Graph). I know the other options like passing the image of graph control to excel sheet and by passing the data to specified cells and generating the xy plot.But my requirement is plotting xy plots in singal xy graph without displaying the data in tabular form in excel sheet. (Like when we call the insert graph VI, it will only inserts the OLE object and data is hidden in that)  Please let me know if you need more clarification and let me know how to do this..
    Regards
    Santosh

    I have got answer from another post. Thanks.

  • WIFI STRENGH SIGNAL REDUCED WHEN USING EXTERNAL SCREEN AND LAPTOP COVER CLOSED

    Hi,  I am using an external screen when my laptop is on docking station and cover closed, the wifi signal stengt is reduced by 30%. I open the laptop cover and the full strengh signal is back. Thanking you in advance.

    You need to use an USB or Bluetooth device to wake it up after closing the lid. Click here for more information.
    (51411)

  • How can i acquire my singal synchronously with sin analog singal

    I need to acquire my singal  synchronously with sin analog singal, but i do not know how to setup.  i get the sin analog singal  from sine encoder , it means location and i need acquire once with a small displacement and same displacement everytime.
    Sorry about my english, i hope someone can help me. Thanks!

    In MAX, I can only test one feature: pulse counts. So I connect a TTL signal between the source and the digital ground, and it counts a random number, of around 20-30 pulses, for each trigger. Same in Diadem. When I try period measurement (connected at the gate) or others with Diadem, I don't get anything.
    I believe my wiring is correct as I'm used to counters with the PC-TIO-10 c/t board.

  • My iphone have low wifi singal comparing my sisters's iphones, is my antenta screwed up?

    as i worte in title, my iphone have baaaaadd wifi connectivity comparing to my sisters's iphones. at the most distant point that iphone can get the singals of wifi, my sister's iphone get it while mine not. i need to get close to source somethin like 10 meters more. so i cant use the wifi in our backyard while my sisters does. i must say that my iphone had some hard falls and bangs during his life. expact of the low wifi singal everythin is fine. could the antena screwed up during one of those hard falls? also, any reseting ios and rebooting arent help.

    Get a new SIM card from your carrier.  Some SIM cards can and do become faulty.

  • WRT54G V. 5 - Signal Strengh problem

    Pretty much, i just recently got both a HDTV and a PS3 (Playstation 3). All of this was moved into my room and is about 30 feet away from my updated firmwire WRT54G V. 5 router. My signal strengh is at a whooping 50% and its not what i want. My question is this, if i go out and get a new router (Wireless-N), would it A: Get the signal strengh to around 100%, B: Be worth it? I mean, i would have to put out $150 dollars for a Wireless-N router, so is it worth it? And if not, does anyone have any suggestions or comments or tips that they would like to share with me?
    Thanks,
    Shane

    This is online gaming 101. Playing through a router hardwired can be a pain in the you know what. Playing through a router wirelessly is even worse. You should always hardwire your connection where possible. It amazes me what people will put up with in order to not spend a little time and run some ethernet cable to there router. if you really must connect wirelesslly you need to eliminate any and all obstructions. Since you cant moves walls the position of the router is essential. Place the router in a location where your PS3 can get a good connection. this isnt a matter of buying a new router. I have the same router and actually get a great connection no matter where i am in my house with my laptop. for gaming I connected My PS2 to the router with ethernet cable. Its the best way for gaming. Then DMZ your game system so as to not block any ports and your all set. gaming on a wireless connection is like Driving a race car with your feet. Sure you could do it but Why???
    Help fight lag! Wire up that gaming machine!!!!!

  • Use PCI-6602 to produce synchronous different TTL singals

    I am using PCI-6602,if I want to use two line to producing two different TTL singals,and the two TTL singals must write to lines synchronously.How can I get it,Thank you !!

    Hi,
    You can generate two pulse trains, one on each counter. If this is what you need, you can do that easly with pulse generation VIs - you can look at the LabVIEW shipping examples - in particular, look at Generate Pulse Train (NI-TIO).vi
    Regards,
    RamziH.

  • Apps 10g singale node to 10g RAC upgrade

    Hi Friends,
    I am planing to upgrade my Apps 10g singale node to 10g RAC. If you have any good document for this please share with me.

    Pl identify exact OS, database and EBS versions. Pl see these MOS Docs
    Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12 [ID 388577.1]
    Step by Step Guide to configure Oracle Applications Release 11i with 10g R2 RAC and ASM [ID 731278.1]     
    Configuring Oracle Applications Release 11i with 10g RAC and 10g ASM [ID 312731.1]     
    HTH
    Srini

  • Poor Airport signal strengh

    A friend of mine has a 1.6 GHz G5 iMac which has a very poor signal strengh even though his iMac is right next to his wireless router (Netgear). His daughter uses a PC laptop and gets very good signal anywhere in the same house.
    A few weeks ago my friend brings his iMac to my house. I have a Apple network with five Mac's and my friends iMac only just picks up my network even though it is right next to an Airport Express.
    All my Mac's are Airport which get max signal strengh with even my iBook getting a great signal outside (weather permitting).
    We checked the aerial connection to his Airport Card which seems fine and my friend says that his signal strengh has always been poor since he fitted his Airport card. His Card seems to work O.K. but sometimes struggles to connect.
    My friend is running 10.4.3. as i was until i updated.
    Would removing and refitting Airport card help.
    Anyone with any ideas.
    Neil.

    Neil, ABSOLUTLY, There have been several reports of Airport Extreme cards coming from the factory not seated properly. It appears that just pusing them in is not enough, they must be two thumbed very hard in order for them to seat properly. The problem you describe fits this to a tee.
    Don

  • How do I read a singal on row 1 with my DMM connected to the HVBP

    I have placed a signal on c1 of my SCXI 1129 and connected it to r1. Then I connected r1 to com1 and com1 to ab1. At this point how do I read that voltage using my DMM that is connected to the backplane. I was able to do it by using c0, r0, com0, ab0 and I recieved the proper measurement. Also, i should not that I have done all my testing using the front softpanels.

    I was interested in connecting the 4 DMM leads to R0 thru R3 of a 4x64 matrix. It is not possible with the standard cable. The response accurately described the cable. Documentation that points this out seems to be lacking.

  • IPhone 4S update to iOS 5.1 singal and battery issues

    Hi,
    I was on 5.0.1 and had no issues at all loved the phone and my battery life. Eversince I updated to 5.1 my phone signal is awful, 2 bars when I had 5 before, constantly floating, calls drop for no reason. Yesterday nobody was able to reach me until I restarted my phone. Switched phone on in the morning yesterday and I get no service for around 30 minutes, after restarting 3 times it finally found network.
    On o2 got my iphone from Apple unlocked.
    As to battery life I can loose around 10-20 % in 2-3 hours not doing anything just in stand by, my battery issues were solved with 5.0.1 but started again with 5.1
    What is apple doing? it is to say the least frustrating as ****. Fix one thing then break another, or break 2 while fixing them. It ****** me off.
    I tried to restore my phone 7 times already set up as new and still no improvement.
    One more interesting issue is when you go to your purchases in App store, and click dowload and app dissapears and then reappears on home screen few minutes later once it is done downloading.
    Anyone else with this kind of a issue?

    Honestly guys,
    It is either apple is blinded by their immense success which will not last if they keep going the direction they going. They should have more time to test their products thouroughly before they put their production line on overdrive. Company this size ignoring issues like that.
    I think new Ipad will have problems as well, it seems this line up 4S and new ipad is kind of transition point to a newer devices and were made just to get something out on the market. Using same CPUs same formfactor.
    My problem is I payed a fortune for it and it doesnt perform, I dont pay 600 pounds for a phone because I want to have issues with it. What they are doing is plainly ignoring these problems. Battery issue been going on since the release of the phone, going to be a year soon.
    Microsoft and Apple changing places, look like microsoft going the right direction now with Widnows 8 and mobiles where as apple comes up with something like Lion which I hated and now Mountain Lion which plainly is running out of ideas and starting to implement some features from iOS, these are completely different devices. They do not need to be the same, they werent created for the same purprose.
    I was on apples side all along but they are blinded by their pride in leading this revolution that they choose to ignore these issues. Relying on peoples stupidity to show off things like ipad 3 is 4x faster than tegra 3 where as in real results it came out 15% faster.
    Apple get his fixed before it is too late. Scared to buy your products now!!! Good thing I didnt get iPad looking at overheating issues it is having, and also not charging from cable while in use but draining battery. No thanks

  • I do not get full strengh from my 400n

    Hi,
    I do not know why but somethings my connection becomes very slow then dissconnects the after 1 mins it tries to reconnect again but after the internet is very slow. This is a dual band router.
    How can I fix this problem.
    Thanks,
    Message Edited by shamilgretzky on 01-22-2010 09:32 PM

    Are you facing these problem on your Wired Computer or on your Wireless Computer?
    Have you tried to reset your Router and Re-configure all the settings it from scratch, If not then Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • Singnal strengh is bad

    I own an Apple Airport Extreme and my signal strength is terrible. Any ideas?

    no its ok, just keep it a bit farther away from u

Maybe you are looking for