Singapore Part Time Labview Programmer Needed

Hi all,
We are a Biomedical engineering company looking for  Part time Labview Programmer which can assist us in developing Labview related projects such as DAQ, Motor driver, Vision capturing system. Preferably have some knowledge in interface design and motor control although no necesary.
Interested parties please email me at [email protected] for further discussion.
Warmest Regards
TC
Singapore.

Hi,
 I am quite intersted in ur job.. I will be free through this summer from may 15 to july 15 .. I am doing my masters in US .. I can come down to singapore at my own expense I am quite intersted in the work and would like to get more information on it so i can plan out things.

Similar Messages

  • Part time LabVIEW programmer needed

    Hi All,
    I am looking for a part time LabVIEW programmer to help maintain and enhance
    an existing LabVIEW application.
    The company is located in Central Florida area - someone local would be most
    desireable. The program is fairly complex and interfaces with proprietary
    DAQ hardware. If you have less than 2 years of experience, its probably
    more than you would want to tackle.
    Goto http://www.rgm-isis.com/ to see product info
    http://www.rgm-isis.com/prod01.htm here is one of the few screen shots.
    If you are interested please respond to [email protected], please don't
    respond to the E-Mail that this is posted from.
    The web site also has phone numbers and addresses.
    Thanks
    Chris

    Chris;
    I realize you are looking for a permanent Labview programmer, but you might find the flexibility and cost effectiveness of having a contractor working on a project basis an attractive alternative.
    We are a small group of programmers who specialize in, but are definitely not limited to, LabVIEW and DAQ applications. Our model is a little unusual in that we contract through a company in Connecticut, while we are individually located throughout the country (CT, TX, AZ, CA).
    Every one of us has a degree in some engineering discipline with varied levels and types of industry experience. We try to match up an engineer(s) to a particular assignment based on their expertise. They also become the point of contact for all contract negotiations.
    Generally, we tr
    y to complete a project with minimal to no site visits, for two main reasons: it helps us keep the cost of a project down; given the scope of most one-time assignments, it is completely unnecessary. We have enough instrumentation and equipment to test most smaller systems. Granted, we may not own any particular instrument that you happen to be using (we won't have a $30k Tektronix logic analyzer!), but we can make special arrangements as required.
    If you are interested and want further information, feel free to contact me at [email protected]
    Regards
    Eric

  • Part time Labview programmer NEWARK, DE

    looking for a labview programmer to complete some small jobs.  must be familiar with motorized stages, CCD imaging analysis, data handling.  More work possibly to follow. 

    Hi,
    This refers to your requirement for LabVIEW programmer in Newark, DE.
    If you need the
    latest in virtual instrumentation technology with a team to help with the details of the system
    or if your company has been using LabVIEW and you need a team of experts to
    develop for you then consider us. We offer the most competitive rates and the highest quality of service available. We can provide a LabVIEW consultant on-site  and with the aid of
    our engineering team and state-of-art R&D facility your company’s software issues will be
    a thing of the past and you will be operating like clock work.
    Please reply to this message and let us have your contact details so we can quote you. Be assured, there is no need to compromise on quality and deliverables in order to cut costs!
    Best,
    Aum

  • LabVIEW programmer needed for full time position, Orange County CA

    Anaheim CA 92801
    [email protected]
    Job Title: Project Manager
    Job Type: Permanent
    Job Location: Anaheim CA
    Main hardware expertise required: Compact DAQ/RIO (cDAQ,cRIO), Enclosures, Cabling, Other (please comment)  
    Main software expertise required: LabVIEW, LabVIEW Real-time (RT)
    Job Description: LabVIEW programmer needed to program and update a series of technologies while using NI CompactRIO and Single Board RIO applications. Some basic networking and basic electronics experience required.
    40 hrs/wk at our Orange County facility.
    What qualifications and T&M certifications do you require? Technical, LabVIEW Certified Developer Prefered
    Salary Offered: $60K-80K based on experience and qualifications  
    The attachment is a picture of the prototype ETU unit. The DBA of the company is "GreenLink Systems," our website is www.greenlinksystem.com
    Attachments:
    ETU and Staff.jpg ‏186 KB

        Bill,
    We are able to offer you the help you need on
    this.  I work for a LabVIEW/test-system consulting group based here out
    of Salt Lake City...not too far if a quick trip is needed.  Among the
    six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
    contract work, local and remote.  This sounds interesting and right up
    our alley as far as experience goes.  I'd refer you to our website for
    further info about different projects that we've done for many
    clients.  www.mooregoodideas.com.
    If this seems workable for
    you, feel free to shoot me a note at [email protected]  I'd be
    curious to know more about what you're after and how we can help you
    out. 
    Thanks,
    Jim

  • Houston LabView Programmer needed

    Houston, Tx LabView Programmer needed.
    We are looking for a Labview experience programmer in the. Please contact for more details. (713) 333-0227

    There is a special forum for this kind of posts: http://forums.ni.com/ni/board?board.id=JobPost
    Thanks!
    LabVIEW Champion . Do more with less code and in less time .

  • Part-time labview job

    Hello ,
    I am looking for a part-time labview job, remotely.
    Have 6 years labview experience, participated on different projects.
    Main qualifications - large scale software architecture,costum hardware IO, signal processing.
    Recently  started to work as a freelancer, my page at oDesk.
    Regards,
    Michael.
    LV 8.2 at Windows & Linux

    我们现有一项目需聘兼職LabVIEW工程師， 有意请电邮：[email protected]

  • Part time labview contracts sought

    Hello,
    I'm looking for some part time labview (and/or c,c++, pascal)
    programming work to supplement my student stipend. I have 2 years
    experience in labview programming and I'm trained as a physicist
    (experimental condensed matter). Please be in touch for a CV and further
    details.
    best regards,
    Seb James
    Sebastian James
    IRC in Superconductivity
    University of Cambridge
    Madingley Road
    Cambridge, CB3 0HE, UK
    work: +44 (0)1223 337040
    home: +44 (0)1223 526107
    fax: +44 (0)1223 337074
    email: [email protected]

    im fresher in control & instrumentation with basic knowledge in LabVIEW currently looking forward for a job. herwith i have attached my resume. eagerly waiting for an opportunity to gain experience in my core
    Attachments:
    Aarthirajan..doc ‏50 KB

  • Experience​d Labview Programmer Needing Job in US

    Hello,
    My name is Rollin, I have been working in for a European research facility in
    Grenoble, France as an Electronics Engineering Technician for 8 years.
    I have 3 years Hands on experience with Labview, for instrument control and
    data acquisition through serial, Hpib and Daqcards. I' m in Atlanta, but I will
    relocate anywhere in the US If someone hires me. I have enclosed my resume here
    after.
    Thank you for your time and consideration.
    INSTRUMENTATION LABVIEW SPECIALIST
    Mr. Rollin S. McCarty
    4941 Central Drive, Apt. 705,
    Stone Mountain, Georgia 30083
    Phone: 770-413-4092
    E-mail: [email protected]
    PROFILE
    Broad knowledge of control systems, electronics and instrumentation.
    Labview Programming Expert (3 years hands on experience).
    Excellent Documentation skills.
    Bilingual French-English. US Citizen.
    DETAILS
    Hardware:
    Design, development, installation and maintenance of PC based automation
    solutions used in the fields of data acquisition, motion, process and
    instrument control. Includes analog & digital circuit design, use of
    electronics CAD simulation tool (SPICE), together with general purpose
    electronic test equipment.
    Software:
    Design, development of Labview software, including low level instrument drivers
    - using serial and HPIB protocols, plus various I/O analog and digital
    interfaces - data processing and program logic, as well as menu driven user
    friendly GUI.
    Documentation:
    Production of comprehensive yet attractive and understandable documentation.
    HTML skills. MSOffice.
    EXPERIENCE
    European Synchrotron Radiation Facility, FRANCE
    Computer & Electronics Engineering Specialist,
    1991- 1999
    Provided scientific research institute survey team using a large variety of
    state of the art survey equipment with turn-key automation solutions, leading
    to an increase in quality as well as in quantity of the production.
    Caterpillar, FRANCE
    Mechanical Methods Specialist,
    1989- 1991
    Training and support of fifteen mechanical computer draftsmen for their
    corporate CAD tool. Provided manufacturing shop information regarding new
    technologies.
    Caterpillar, FRANCE
    Electrical & Mechanical Technician,
    1988- 1989
    Preventive and break down maintenance of bulldozer girder welding robots and
    associated machinery.
    EDUCATION
    Cuefa & Learn. Tree, France - Java bases & Networking, 80 hour training, 1999.
    Esrf, Grenoble, France - Labview, 40 hour training, 1996.
    French equiv. to AS/BS, Grenoble, France - Computer Programming, 1992.
    French equiv. to AS/BS, Grenoble, France - Electronics, 1988.

    You probably already have a job, since this was posted in 1999.. But if you don't, we are looking for a labview programmer at Brown University in Providence, RI. It is a part-time position for data acquisition/analysis. we study sensory processing in the brain.. let me know if you are interested: [email protected]

  • DIRECT HIRE LabView Programmer needed!!!!!!!

    I have a DIRECT HIRE opening in Michigan for  LabView Programmer.    Must have a background in the automotive industry.   Please email me your resume or call me for more information.   [email protected]   or 248-528-1200 x216
    Thanks!!!
    -Vicki Powell

    This probably belongs into the LabVIEW job opening forum.
    http://forums.ni.com/ni/board?board.id=JobPost
    LabVIEW Champion . Do more with less code and in less time .

  • Labview Programmer needed for project work in Milwaukee Area or over the internet

    We have a project I need to get done before summers end and we have majotiy of the code. My company builds robotic systems which we use for industrial inspections mainly in the petrochemical industry.  These robotic systems work with a ultrasonic systems which we use to take thickness measurements of piping and pressure vessels using ultrasound.   We have the ultrasound equipment and most of the software as said previously, we just need it polished up and some additions made.  Here is a link from NI which is simular to what we do and you can even download the code and have a look at there code: http://zone.ni.com/devzone/cda/epd/p/id/3618 . Our code is a bit more complex but you get the picture. 
    This position is not a full time position as of yet.  We are looking for someone to work with us on a contract basis for now. We need someone experienced with the following; Data aquisition, Data analysis, Experience with RF, USB comunication.  We perfer to hire somebody local but if we cant we can can do this over the internet.  If you are interested, give us a reply with contact info.  Thanks.
    Regards,
    Bill

        Bill,
    We are able to offer you the help you need on
    this.  I work for a LabVIEW/test-system consulting group based here out
    of Salt Lake City...not too far if a quick trip is needed.  Among the
    six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
    contract work, local and remote.  This sounds interesting and right up
    our alley as far as experience goes.  I'd refer you to our website for
    further info about different projects that we've done for many
    clients.  www.mooregoodideas.com.
    If this seems workable for
    you, feel free to shoot me a note at [email protected]  I'd be
    curious to know more about what you're after and how we can help you
    out. 
    Thanks,
    Jim

  • SpaceX seeking full-time LabVIEW programmer to join Texas team!

    Please email [email protected] for more info. General Description below...
    The Company
    SpaceX is a US based space technology company founded by its residing CEO and CTO, Elon Musk, the former co-founder of PayPal. The company's goal is to renew a sense of excellence in the space industry by disrupting the current paradigm of complacency and replacing it with innovation and commercialized price points; laying the foundation for a truly space-faring human civilization.
    SpaceX builds rockets and spacecraft from the ground up; including electronics, software, vehicle structures, and engines. In-house development includes nearly all flight critical custom components amounting to approximately 85% of our vehicles both by mass and by value.  Our development and production efforts represent some of the most dynamic and challenging technology opportunities seen by any organization.
    Our success is driven by a wide variety of engineering perspectives and openness to all great ideas.  We pride ourselves on being a meritocracy where employees are defined by their capabilities and contributions, instead of title or tenure. We are actively seeking the best and brightest minds from all industries to continue to build our world class team.
    Our employees thrive in a fast-paced engineering ecosystem focused on innovation and high levels of personal responsibility. At SpaceX we cut through the noise and believe in the essentials of hardcore engineering.
    We build it, test it, and fly it.
    The Department Rocket Development Facility – Our Texas team is an integral part of SpaceX operations and plays the critical role of testing our flight vehicles and spacecraft.  Located on a 700 acre site in central Texas, the Rocket Development Facility is responsible for testing hardware from development stages through acceptance for flight, and from component level to complete stage testing.  Experiencing the rumbling of a rocket engine multiple times each day is just one of the highlights of working at our Rocket Development Facility.
    The Job
    Responsibilities
    All SpaceX engineers work in a fast-paced environment, supporting a variety of propulsion testing programs and structural test stands.  Specific responsibilities associated with this job include:
    Design and maintain National Instruments SCX/PXI data acquisition systems
    Identify hardware requirements and compatibility
    Assemble, setup, and validate DAQ hardware configurations
    Troubleshoot DAQ hardware related problems.
    Benchmark system performance and performance margins
    Design and maintain LabVIEW-based applications and utilities to support propulsion testing operations
    Software testing, quality assurance, and benchmarking
    Performance tuning, improvement, usability, and automation
    Integration of new features into existing systems
    Full life cycle software development
    Provide technical support for testing operations
    Create and maintain software development standards
    Evaluate new systems, technologies, and architectures to reduce development time, increase reliability, and to streamline operations
    Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment.
    Requirements
    Education & Experience Requirements:
    Bachelor’s Degree in Engineering required
    1-2 years experience required; 3-5 years experience preferred
    CLD Certification preferred
    General Requirements:
    Certified LabVIEW Developer (CLD) certification or 2+ years LabVIEW experience Experience with Object Oriented Programming (OOP) recommended
    Understanding of basic computer networking (TCP/IP, UDP, firewalls) is essential
    Ability to learn new skills/programming languages/application quickly (C, C++, .NET, OOP, UML, Databases)
    Experience designing large LabVIEW applications
    Experience creating intuitive graphical user interfaces
    Experience implementing and troubleshooting National Instruments hardware
    Familiarity with National Instruments products, services and resources
    Ability to rapidly change roles/responsibilities while working in a fast-paced, challenging work environment is a requirement
    Ability to develop software in a team environment
    Experience using test instrumentation and control components: pressure transducers, thermocouples, RTDs, strain gauges, accelerometers is recommended
    Software/Computer Skill Requirements
    Windows Operating Systems, Expert
    Microsoft Office (Excel, Word, Power Point, Outlook), Intermediate
    NI Labview, Intermediate
    NI Diadem, Expert
    Physical Requirements:
    Ability to work in a high-stress environment
    Good response to challenges posed by short deadlines
    Acute attention to detail
    Demands require prolonged mental concentration
    Work performed in a normal office environment
    Ability to sit for long periods of time
    Problem solving and critical thinking skills
    A positive, upbeat attitude
    Physical effort with some handling of light weight such as supplies or materials (0 to 15 lbs)
    Typically exposed to work in extreme outdoor environments – heat, cold, rain
    SpaceX offers one of the best environments in the world for employees to learn, build real working systems and tackle exciting challenges every day. We operate in a fun, casual work environment and have great benefits including: competitive salary, stock options, medical/dental insurance and free gym memberships. By joining the SpaceX team, you are not just a part of history, you are making it.
    SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, marital status, mental or physical disability or any other legally protected status.
    To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
    Those applicants requiring reasonable accommodation to the application/interview process should notify the Human Resource Department at (310) 363-6000

    Still waiting for the Venice, CA team, just kidding.
    LabVIEW Champion . Do more with less code and in less time .

  • LabView Programmer needed

    Programmer with LabView and Intellution needed for contract opening in
    South Carolina. Please send e-mail to [email protected] to
    request more information.

    I have a lot of experience with LV, what the contract?
    Mike...
    [email protected]
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Looking for Freelance/ Part Time LabVIEW opportunities in Midlands UK

    Hi All,
    Along my full time Mon - Fri job as Automation Software Engineer (Siemens TIA Portal, step7 simatic manager, WinCC Flex, s7-graph, Proagent and NI LabVIEW),
    I am looking for additional freelance/ contract opportunities in writing LabVIEW code for machine control and product testing purposes. I am not limited to coding, I can happily specify and install DAQ systems/PLC systems, sensors, do panel wiring, etc
    I am LabVIEW trained Controls Engineer with 3yrs experience; also beeing lucky to have completed over 9 different courses to date in NI Training Centre, Newbury. However CLD or CLAD is not something what I have acquired yet.
    Target audience includes machine builders and integrators requiring LabVIEW application written for their equipment. My work examples can be provided upon request which covers Test programs written in automotive industry for Digital and Analog IO control, LVDTs measurements, RS232 coms, Barcode Scanners, Printers, etc,
    I do have my own LTD with public liability covered, so no issues here.
    Best Regards
    Tom
    Warwickshire

    我们现有一项目需聘兼職LabVIEW工程師， 有意请电邮：[email protected]

  • North New Jersey - LabVIEW Programmer Needed

    Instrumentation Engineering, LLC is looking for an experienced Test Engineer who is proficient in LabVIEW and systems integration. 3-5 years experience preferred. Competitive salary and benefits.
    Instrumentation Engineering is located in Oakland, New Jersey and has been in business since 1969. IE is a engineering company whose sole focus is ATE Systems design, fabrication and integration.
    We currently have one opening in the Engineering department and are currently accepting Resumes.
    Please email your resume to:
    David Rosenthal
    Vice President
    Instrumentation Engineering
    http://www.ietest.com
    [email protected]

    I'm moving to PA soon, not too far from the Jersey border (Tamaqua, PA). I might be available for work. It's unlikely that I would need to actually go to your site, although I can make myself available if need be.
    John Wilson
    [email protected]

  • LabView programmer needed to develop VIs for two immediate projects in Belmont NH, apply ASAP.

    Projects are relatively small: first one is for a testing machine with data aquisition and control, second is a file storing project.

    Dear Sir,
    I have been working in development of various project in LabVIEW since more than 5 years. I am attaching my resume with this.
    Please do send the project details and requirement, then only we can discuss about pricing and other things.
    Thanks & regards,
    Rajendra Gaikwad
    +91 9663398272
    Attachments:
    Rajendra Gaikwad CV.doc ‏110 KB

Maybe you are looking for