Single Airport Express with Multiple iTunes Clients ?

Is it possible for an Airport Express to be controlled by more than one copy of iTunes or does it have to be a unique pairing?
I have an office of Mac users who want to be able to play from their desktop iTunes libraries to an office stereo connected to an AE. Obviously they can't all play at once... But will they all be able to see a single AE and stream to it on a first come first served basis?
I can't find anything relevant on Apple site or by googling. Everything is about one copy of iTunes to Multiple Airport Expresses (Expressi?).
Thanks in advance
greg.

Yes, they can play music through iTunes off each of their desktops. Here's the catch...if someone has the AirportExpress picked as their selected speaker, nobody else can play music through it until that user changes the AE speaker back to "Computer" via iTunes on their desktop. All of the other users would see a message that another computer is using that speaker.

Similar Messages

  • How to use more than one airport express with multiple speakers

    I have 2 Airport Express. Prior to the multiple speaker enhansement I changed spekers by changing the wireless network. Each of the Airports is recognised as a wirelss network. Is there any way I can make my computer and itunes to see all of my Airports so I can use the Multiple Speaker function for both of my Airports at the same time withour having to change wireless network.

    You need to have a single wireless network.
    If you con't have a wireless router, then you will need to configure one of the Airport Express (AX) units to join the existing wireless network of the other AX.

  • Can no longer connect to Airport Express with upgrade to iTunes 10.1

    Since I upgraded to iTunes 10.1 I can no longer connect to my Airport Express (unknown error-15000). Another computer on my betwork running an older version of iTunes still works on the Airport Express.
    Any ideas? I have tried to uninstall and reinstall airport express with no success.

    Rather than disabling the firewall, try making sure you've got exceptions in it for BonJour. Although the following document is about a different error message, the instructions in there are worth trying. (At step 7, make sure there's an exception for BonJour as well.)
    [iTunes for Windows: Bonjour alert due to firewall, security, or proxy software|http://support.apple.com/kb/TS3448]

  • Trying to set up Airport Express with Ethernet Powerline adapters

    Hello,
    Having some problems trying to set up my Airport Express with Netgear ethernet powerline adapters.
    I want to set up as follows:
    Wireless Belkin router --- powerline <---> powerline --- airport express --- home stereo system
    The problem I have is that I can connect the airport x in client mode & wirelessly play music using airtunes (until the sound breaks up) but itunes does not find the airport x when connected via the powerlines.
    I have airport admin utility configured as follows:
    Airport tab:
    Wireless mode: create a wireless network
    Wireless network name: same as my wireless router SSID
    Allow this network to be extended: unticked
    radio mode: 802.11n (802.11b/g compatible)
    Channel: automatic
    Wireless Security: WPA/WPA2 personal (as per my router)
    Wireless Password: as per my router
    Verify Password: as per my router
    Internet tab:
    Connect using: ethernet
    Connection sharing: off (bridge mode)
    Music tab:
    Enable Air Tunes ticket
    no password set
    In iTunes, I have home sharing on & share entire library selected with no password set.
    Using OS 10.6.5 & Airport Express 7.5.2
    I can ping the IP address of the airport express when connected via the powerlines but cannot select the speakers in iTunes (they are greyed out).
    Any assistance would be appreciated....
    Thanks

    Hi,
    Thanks for the quick response...
    As suggested, I connected up the Airport X to the Belkin and plugged in a pair of headphones. It didn't work, still could not select the Airport X as speakers.
    Dug out my old Netgear DG834G and connected that up in place of the Belkin - it worked. Next connected in the Netgear powerlines and it still worked.
    So, the problem is the relatively new Belkin F7D4401 router.
    Looks like I will have to find an alternative 802.11n...
    Thanks for your help.
    Regards
    Simon

  • How can I share only the same music with multiple iTunes accounts

    Hello
    I hope someone can help. [I am using Windows Vista (Unfortunately J) and iTunes 10]
    I am trying to share the same music library with multiple iTunes accounts. Basically, I want to know if there is a way to automatically upload to other libraries when importing new music into my library, vice versa. [Better information below]
    Me, my sister and my dad all use iTunes (on different iTunes accounts), and before now we used to have are own music on our own windows user. Due to many duplicates and a loss of hard drive space I have brought an external hard drive and organised all the music.
    It was all going well - I first populated all the music onto my iTunes, exported the library, and then imported it on both the other users. However! Because this is only a copy of the library, when I try to import a new CD, it will not show up on there’s until I “Add File to Library”! Originally I thought about using the same library however we each have are own apps etc, that we don’t want to share.
    If you need anymore information please ask!
    Matt

    Hello roaminggnome
    Unfortunately the support is down at the moment, I will have a better look later. I did go though the Apple support previously, however I found nothing that worked.
    The first thread I came across was “Home Sharing” however no mater what I did, it did not appear in the iTunes sharing list (I did go though the “Show Sharing Networks” support as well)
    Secondly, I saw “Using A Single Library With Multiple Accounts On The Same PC” (Something like that) but all this did was let us share the same music location, if I was to rip extra music, it will not show in there library
    Matt

  • Replacing an Airport Express with a Time Capsule but it won't connect to the internet.

    Hello, I hope somebody can help.
    I am trying to replace an Airport Express with a 2TB Time Capsule but it won't connect to the internet, via an ADSL modem.
    I have tried everything I can think of, powering down all devices, re-setting all devices, but nothing seems to solve the problem.
    When I first tried to set up the Time Capsule, there was an option to replace the Airport Express using the same settings.
    But there were repeated error messages of 'No DNS Servers' and 'PPPoE server couldn't be found'.
    I also had messages that the password for PPPoE wasn't correct, but when I plug the Airport Express back in again, everything works fine.
    What could the problem be?

    99% of issues with authentication are wrong password or wrong username.. eg it can be strange like the user name is missing the domain.. whereas the Airport Express works fine without it.
    Ring your ISP and make doubly sure you have exactly the correct username and password.
    If it still doesn't work, put the adsl modem back into router mode and try it again directly on the modem.. if it works ok on the modem but fails on the TC that is possible and can be caused by pppoe client using incorrect authentication type, CHAP or PAP which the TC does not allow you to select AFAIK.. some ISP do not give enough time to get the router to switch on auto to the correct authentication method.
    In the end run the modem as router and bridge the TC. It will work just as well for most installations in bridge as the modem in bridge.

  • Airport Express with printer & hard drive with Time Machine

    I have a MacBook that I'd like to backup its data. Concerned about the following (in level of concern from highest to lowest): theft, crash, fire.
    I currently have an Airport Express with a Brother printer attached to it that my PC and MacBook print to.
    I am really in a dilemma as to what to do. I was looking into Carbonite to get an offsite backup location of my data. (I figured offsite would cover all concerns of losing data due to theft, fire, or just a crash) However, Carbonite does not hold onto data you delete (ie, my photos and videos will fill up my hard drive eventually and I'd like to just archive them in one central spot when I am done accessing them on a regular basis-- ie delete them off my MacBook hard drive). That is like $55/year to do Carbonite... but, the only thing that will help me with over a hard drive in my house is a fire (and theft if a burglar were to find where my backup drive was in the house).-- Of course, I'd probably want a different location for my hard drive for that reason -- so, I'd have to buy another airport or just a time machine that has the wifi built in.
    I've read lots of issues with the Western Digital trying to download programs onto your computer... I have one for my PC that I backed up photos manually and it did try to install programs when I attached it to my PC... not so much my Mac when I took some photos off it. I looked into getting another portable hard drive at Costco for my Mac, but realized that it would require reformatting to use on my Mac (as it was built for a PC).... something I wasn't sure if I was computer-savvy enough to do or if I did do it, would I end up with issues later on?
    Anyhow... in the end, what do you all do to backup your data, especially photos and videos? Do you have smaller hard drives that you back up to and then when full move them to an offsite location? Can you have more than one "hard drive" backing up..... I was thinking it would be nice to have one larger hard drive that would potentially hold all my photos and videos so I can access anytime, but then have smaller drives of the same data that I can take to a safe deposit box and use as my super secure backup (no fire, no theft, no crash).
    btw, When doing time machine, does it keep all the metadata with each photo?
    Burning CD's is time consuming.... and, I have heard there are different qualities of disks out there... archival v. not... how long do the archival last v. the non-archival... or is that more of an issue for future generations not being able to access our photos?

    You need to remember that the Time Capsule is both a wireless router and a hard drive all in one enclosure. If you don't need a wireless router, around $150 of the $300 for a Time Capsule is going to be in the router portion of the device.
    The nice thing about the Time Capsule is that it is a network drive. All Macs running Leopard or Snow Leopard will be able to back up automatically to a single device. The first generation of Time Capsules about two years ago had some power supply problems that affected some users. Apple announced a program for these users to replace their Time Capsules.
    So, it depends on your requirements. If you are looking for a new, dual band wireless router and want to backup your Macs running Leopard or Snow Leopard automatically using ethernet or wireless, the Time Capsule is a logical choice.
    If you don't need a new router, then you'll need to look at a separate hard drive that will be attached directly to the computer using the USB or FireWire port. If you have two Macs, you'll have to get two hard drives if you want to do Time Machine backups correctly.
    Most hard drives can be reformatted to work with Mac if you don't mind a few extra steps and Disk Utility (Macintosh HD > Applications > Utilities > Disk Utility) does not look too complicated for you.
    Message was edited by: Bob Timmons

  • I cannot get my Airport Express to accept wireless clients.

    I cannot get my Airport Express to accept wireless clients. After resetting to factory default and reconfiguring, it works briefly but then stops again.
    The Airport Express is on the second floor of my house and is seen by Airport Utility. Using a LAN cable with the Express works no problem.
    My network is created by an Airport Extreme (ground floor) and extended by a Time Capsule (first floor)
    Have run through all settings repeatedly and as I said I can get it to work briefly by resetting and then reconfiguring, but after a short while again my iOS devices can no longer connect and revert to cellular.

    I cannot get my Airport Express to accept wireless clients. After resetting to factory default and reconfiguring, it works briefly but then stops again.
    The Airport Express is on the second floor of my house and is seen by Airport Utility. Using a LAN cable with the Express works no problem.
    My network is created by an Airport Extreme (ground floor) and extended by a Time Capsule (first floor)
    The issue is most likely due to the fact that the AirPort Express may be too far from the AirPort Extreme to properly extend it with enough bandwidth to be useful.
    It is important to understand that with Apple 802.11n or 802.11ac base station an extended network works in a wheel-like fashion with the base station to be extended at the hub and each extending base station along one of the spokes. This type of configuration does not allow for daisy chaining the base stations. That is, in your case, both the Time Capsule and AirPort Express are attempting to extend the AirPort Extreme.
    Each extending base station must be within a certain signal quality range in order to extend the network properly. Please check out the following AirPort User tip for details.

  • Does Airport Express support multiple ethernet connections via a switch?

    If I use the following configuration, with the Airport Express extending my network, will it handle multiple devices connected via a switch?
    Modem---Airport Extreme- - -802.11n- - -Airport Express---Switch---multiple devices (eg. network printer and iMac).
    Or do I need to use a second Airport Extreme instead?

    It works for me—even when the AirPort Express device is configured to extend the wireless network created by the AirPort Extreme router.

  • Airport Express with D-Link router?

    I bought an Airport Express with the specific purpose of connecting an old 1999 iMac to the internet (D-Link wireless router) via the ethernet port. I also thought I could use it to connect other ethernet devices such as my HD-DVD player.
    I tried to configure the Express with my PowerBook to discover later in the instructions that the ethernet port is disabled when configuring the unit as wireless bridge/client. It sounds odd, becuase I can't understand the use of it, then. The range extender configuration which enables ethernet, apparently only works with an Airport base station. I admit I'm not very networking-savvy. Did I do something wrong? Am I understanding the instructions correctly?
    Any help will be greatly appreciated.

    Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your D-Link router can be extended wirelessly with the AirPort Express Base Station (AX).
    The few that are known to work are:
    o another Airport Express Base Station
    o 802.11g Airport Extreme Base Station (AEBS)
    o 802.11n AirPort Extreme Base Station (AEBSn)
    o Linksys WRT54G or WRT54GS (not v5)
    o Belkin F5D7230-4 and F5D7231
    o BT Voyager 2091
    o Netgear WGR614 v6
    o Buffalo WGR-G54

  • Airport Express with Time machine vs. Time Capsule?

    I'm looking at replacing my backup system. I like the idea of Time Capsule with Time Machine, but I'd like to know if Airport Express with an External drive really works as reported with the March '08 firmware update. I can't find a single place where Apple confirms this.
    Also, I look at time capsule and think it's cool, but with $179 (AEBS) + ~$200 (USB 1TB drive) = $379
    and 1TB TC running $499, why would I buy TC? The AEBS system gives me the ability to easily swap the drive if it fails and I could buy a drive with a 3-5 year warranty vs. the 1 year on a Time Capsule?
    Comments?

    I assume that this is a new AirPort Express and you have not tried to configure it previously.
    Locate the AirPort Express in the general area where you would like to have more wireless signal coverage.
    Connect the Ethernet cable to the WAN "O" port on the back of the AirPort Express
    Power up the AirPort Express and let it run a few minutes. The amber light will be blinking slowly at this point.
    Click the AirPort icon at the top of your Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click directly on AirPort Express.
    AirPort Setup will open up automatically on your Mac, take a minute to analyze the network, then announce that the AirPort Express will be configured to extend the Time Capsule network.
    Enter a device name that you want to use for the AirPort Express and click Next
    Wait a minute while AirPort Setup configures everything for you. When you see the indication of Setup Complete, click Done.
    You should be all set.

  • Trying to get my Viera TX-P42S30B hooked up to me home network via Airport express with no luck.

    Trying to get my Viera TX-P42S30B hooked up to my home network via Airport express with no luck.
    Have tried both wired (network cable) and wireless to no avail, can't find much info online, any help appreciated !
    Airport utility 5.5.3
    Airport Extreme 802.11n
    Airport Express 802.11g

    The problem is that the AirPort Express (AX) is creating a subnet.
    To prevent that, configure the AX to act as a bridge (so that it is NOT sharing a single IP address).

  • Connection to airport express fails after iTunes 10.1.1.4 upgrade !

    Hi,
    Before ugrading iTunes to V10.1.1.4, everything was OK and I was listening music from itunes through airTunes with my airport express V 6.3.
    Since I've upgraded iTunes, when à play a song, I've the error msg "cannot connect to [airport express name]. network connection failure"
    It's the second time, I've connection problems to airport express after an iTunes upgrade !
    First time was just after uorgrade from iTunes 9 to iTunes 10.
    I had to wait for a new iTunes upgrade to fix up the problem (nearly 1 month !)
    I'm a bit angry with iTunes and that kind of problems just before christmas !
    Thanks for your help !
    Message was edited by: Amalthee

    Yes, there's an exception for Bonjour in the firewall (Bonjour is allowed)
    I've try to re-add the "APAgent" which control Airports and restart the firewall but it didn't worked...
    The only solution I've found was to desactivate Windows firewall...
    (Firewall of my ADSL box is activated).
    Maybe I should try to repair iTunes Installation like WPLU...

  • MacBook Pro sound out to airport express other than iTunes

    Is there any way to get sound to link to my airport express other than iTune files?
    I've gotten iTunes to connect to my airport express and then toslink it to my preamp but is there any way to get audio other than in iTunes to connect wirelessly to my airport express e.g. a movie sound track or a you tube audio? I listen to internet radio through iTunes all day and it's great, but other audio, only comes out either from the MacBook Pro speakers or vie hard wire (or optical) to my sound system. Sounds so simple, and it might be, but... how?

    Sure, it's easy. Check out airfoil at http://www.rogueamoeba.com/airfoil/
    I use it with 2 airport express and also my ipod touch. The "hijack" application they pair with airfoil lets me listen remotely to just about anything I can play on my Mac. Wish I could use the ipod touch as a remote as I do with iTunes.

  • Airport Express with Airtunes help!

    I'm new to the wireless world so my question is why would I get the blinking yellow light on my Airport Express with Airtunes even when I'm within 5 feet of my G4 that has a airport card installed (802.11B). I also tried putting it in the living room which is one floor down and got the same thing.
    I updated the firmware for the Airport Express with Airtunes but have not updated the airport card in the G4 because I'm unsure at the apple download site which software to download.
    System profiler reports the airport card is 9.52 firmware version.
    So is this what I update to: http://docs.info.apple.com/article.html?artnum=120097
    The music is only cutting out from time to time but I would still like to see a green light on the Airport Express, its odd that it blinks yellow stating that I have a weak connection.
    I'm not sure updating the firmware will help the weak signal, I used the airport utility to setup the Airtunes, but maybe there is a different way to configure the network to make it stronger, like I said I'm totally new to this stuff.
    Thanks in advance for any help.
    Roger
    2002 Quicksilver G4
    1.47GHz GigaDesigns Single Processor
    OS X 10.3.9
    1.5 GB SDRAM
    ATI Radeon 9800
    Pioneer 107 DVD-RW
    Logitech MX518 Gaming Mouse
    Klipsch ProMedia 2.1 Speakers
    G4 Quicksilver 2002   Mac OS X (10.3.9)  
    G4 Quicksilver 2002   Mac OS X (10.3.9)  

    The blinking light doesn't indicate a weak wireless signal, it indicates that you do not have an internet connection established.
    Are you using the AE for music streaming without an internet connection?
    Haven't tried this myself, but it might eliminate the blinking light:
    1. Open Airport Admin Utility and double click your AE to open the configuration.
    2. Select the Internet tab.
    3. Set to configure manually and enter:
    IP address: 192.168.1.2
    Subnet Mask: 255.255.255.0
    Router Address 192.168.1.1
    DNS servers 192.168.1.1
    If this doesn't work, there probably isn't much you can do except establish a good connection to another router to get the light to turn green. The above numbers shouldn't be terribly important either since you are just trying to get the Airport to think it has an established connection.

Maybe you are looking for