Single Beep, Display cuts out, then comes back

I've had my macbook for a little over a year. Recently the hard drive died. I replaced it, and figured I'd put new memory in it while I was at it (2GB, Samsung). For a while I ran 10.4 (I was on vacation and didn't have access to my external), and everything seemed to work fine. When I finally got back to my apartment and restored my system with Time Machine, things started off well, but then some weird things started happening. First, when I installed new updates, my computer restarted itself a couple times during the installation (after the initial restart), but then stopped, and installation was successful. I figured things had resolved themselves, but then I started getting these weird problems.
When I close my macbook, it goes into standby, but will sometimes start up randomly while still closed. Also, when I go to open it, it will sometimes load, only to cut out again, make a single loud beep, and then come back and boot up fine.
I've read that a single beep usually means a RAM issue, but I'm curious if the problem is maybe with my system, and I should reformat, since it seemed to run fine with 10.4.
Hopefully I've been detailed enough, but let me know if you need more info. Any help is greatly appreciated.

Not resolved!

Similar Messages

HT1430 My IPAD 3 [5.1.1 (9B206)] has a problem. - It restarts every three (3) minutes: it goes out then comes back but lost the previous page (auto lock is set to 15 minutes) - It can no longer connect to the mobile network orange except Wireless (WIFI)

My IPAD 3 [5.1.1 (9B206)] has a problem.
- It restarts every three (3) minutes: it goes out then comes back but lost the previous page (auto lock is set to 15 minutes)
- It can no longer connect to the mobile network orange except Wireless (WIFI)

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Calls cutting out, then back in, then out....

I have been having trouble for a few months now with calls cutting out, then going back in, then going back out...it makes for very frustrating phone calls. It doesn't happen all the time. It's totally random. It seems, though, that if it starts to cut out in one phone call, it'll keep cutting out on that call until I hang up and call back. And even then it doesn't fix it. It's not when I'm roaming (or even moving...sometimes it'll happen if I'm just sitting in one place), it's not when I'm talking to one person in particular, and it's very unpredictable. The person I'm talking to will just randomly start saying "Hello? Hello? Are you there?" and they can't hear me saying "Yes!" back at them. I can hear them the whole time, even though they can't hear me. Then, randomly, they'll be able to hear me, and it'll be okay for a bit. I talked to a Verizon rep on the phone recently about this and she recommended calling #228 (or something like that?) and updating. I did that, but it didn't do anything for this problem.
Any ideas? I like this phone overall, and don't really want to get a different one. I am not due for an upgrade until a year from now anyway.
Thank you!
Angela

Hi Angela,
Me personally, I think it is a software issue.
My wife has a Rhyme with same issue you describe. As long as she is in a strong cell area, great phone. Once she gets on the fringe, it's anybodies guess.
I say I think it is a software issue because she has had three of these phones and they all behave the same way. My Droid Razr Maxx had the same issue (and some others that were the same on the Ryhme) that cleared up completely when I got the upgrade to ICS. Where we live is a fringe area for 4g and my phone is on 3g more than 4g and now comes in clear as a bell where hers is still flakey. She also still has a Autorotate and proximity to the face issue that I had on my Razr Maxx that cleared up with ICS. The upgrade to ICS for the Rhyme was promised for almost a year ago and still hasn't happened. I think the phone and software people have determined it's not economically feasible for them to continue work on this phone since it's a 3g device. Just my opinion.

Kdl40s5100 picture cuts out for about 1 minute then comes back

when i'm watching programs the pictuture (and sound) will cut out then return in about one minute... this will repeat itself about every 30 -45 minutes.... problem does not occur when watching videos - only cable or antenna

New pc just built and using SSD for C drive. Working great for a few days but minimal usage with just drivers and BIOS updates etc. Then yesterday I turn on pc to do a quick Google search and half way when typing a search question the keyboard entry quits and Firefox is not responding. I tried IE and the same thing happened so maybe its a Win 7 thing I use Win 7 64 Pro with 16GB Ram and i72600K. Also, yesterday was a big Windows update night so I don't know if that interfered in background. Today it happened again but after I waited and watched and hit CTRL/ALT/DEL the system came back and was not locked solid the the night before.

HDMI output cuts out and then comes back, any ideas?

Hi all.
I have a two Dell U2412Ms connected to my MacBook Pro Retina. One is connected via a Displayport connection and the other via the HDMI. I used to have them both connected to the Displayport conenctors but have recently run a cable into my office and now have the ethernet dongle connected to one of the Thunderbolt ports.
Since connecting a screen to the HDMI port, I've noticed that it does something odd from time to time. The screen connected to the HDMI port will go off for a couple of seconds, and then come back on again. It tends to only do this once per 'session' of me using the system. Most times when the screen comes back on, it is fine - but once it came back on the screen was going bananas. It appeared to be mostly grey, but looking closer revealed that all the pixels were going nuts, like a swarm of flies - and there was all sorts of colours going on! I had to unplug the HDMI connection (which caused my windows to move around) and then reconnect it, and then it was fine.
This only happens when using the HDMI port, and is not the monitor at fault - I eliminated it by swapping the screens over so that the other one was using the HDMI .. and it still happened!

As it turns out, the USB failed. The Apple people kept my PB and sent it for repair.
I dropped by the genius bar and left it with them on Dec 14 being told it would take 10 business days or so to get it back.
My trackpad button was very stiff, it stuck and had to press harder than normal to click. This was in effect since I took it out of the box when I bought it. Never bothered as I use a Bluetooth Apple mouse. Now that they kept it for repair for the USB port, they will also fix the trackpad.

The jpegs in my movie start in focus then quickly go out of focus, and then come back to focus just as the clip ends

The jpegs in my movie start in focus then quickly go out of focus, and then come back to focus just as the clip ends

Viewed in FCP or after export?
Russ

Machine randomly shuts off and then comes back on.

Hello! Basically whats happening is my computer randomly shuts off (No blue screen just powers off) and then immediately comes back on.
I am running three monitors and a single GPU. This has happened in two different cities (I moved) I have the same surge protector - however, other things on the protector do not reset / go off (alarm clock no battery).
Here are the crash dumps that microsoft said happened. (I uploaded three different ones)
http://www.mediafire.com/download/juwuzck8wpq6j0r/issues.rar
I'm a pretty avid builder but I'm a bit stumped with this issue. The machine will, at random, shut off completely (including lights) and then come back on, during normal activities and gameplay.
The temps do not appear to be reaching astronomic levels, maxing out at around 60-65c (cpu) and 45c for the GPU.
Parts:
cpu - i7 3960x (turbo enabled normal at 3.3, w/ turbo at 3.9ghz)
mobo - MSI X79A-GD45 /// Intel DX79SI (have tried both, it still happens with either, MSI is a new board.
psu - 750 Antec Gold High Current Pro
gpu - MSI Lightning 680 (no OC)
sdd - samsung 840 pro
hdd - Black 1TB
case - HAF 942-x
cooler - x40 kraken
ram - G.SKILL Ripjaws Z Series 32GB (DDR1600)
Here's what I tried
1. Bought a new motherboard (MSI $260) to see if the issue would go away. - Failed.
2. Was able to reproduce the issue VERY quickly when using the OC Genie2 on the MSI board, with teh button pressed, I could boot up OCCT and have it reproduce the issue with the power-off in around 2 minutes of the test. - Failed
3. Attempted PSU and GPU stress test with stock BIOS, tests ran 1 hr+ each with no issues. Shut down my machine and restarted it this morning and the issue came back within 5 minutes of use just sitting at the Windows Desktop. - Failed.
4. Turned the 32 GB of ram to 1600 and enabled XMP, crashed after 3-5 days.
5. Attempting to test each DIMM individually.
6. Issue happened again after about two weeks of not happening.
I've run OCCT for an hour with the "stock" bios and it didn't crash for an entire hour. I've also attempted to use the "OC genie2" overclock function and that triggered a crash within 2 minutes of the run.
Can anyone give me some more things to try? I'm thinking its possible it could be the PSU, but after running OCCT PSU test for 30+ minutes it had no issues.

* Bugcheck Analysis *
BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 0000000000000020, a pool block header size is corrupt.
Arg2: fffffa802224f9e0, The pool entry we were looking for within the page.
Arg3: fffffa802224fa50, The next pool entry.
Arg4: 0000000004070006, (reserved)
Debugging Details:
TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
BUGCHECK_STR: 0x19_20
POOL_ADDRESS: GetPointerFromAddress: unable to read from fffff800036ca100
GetUlongFromAddress: unable to read from fffff800036ca1c0
fffffa802224f9e0 Nonpaged pool
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: chrome.exe
++++++++++++++++++===============================++++++++++++++++++++++==========4
* Bugcheck Analysis *
VIDEO_TDR_TIMEOUT_DETECTED (117)
The display driver failed to respond in timely fashion.
(This code can never be used for real bugcheck).
Arguments:
Arg1: fffffa80262bc4e0, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff8800fa2be20, The pointer into responsible device driver module (e.g owner tag).
Arg3: 0000000000000000, The secondary driver specific bucketing key.
Arg4: 0000000000000000, Optional internal context dependent data.
Debugging Details:
TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
FAULTING_IP:
nvlddmkm+153e20
fffff880`0fa2be20 ?? ???

Having trouble with music apps shutting down, even after I swipe them off the screen. They go off then come back on in a few minutes. This happens in my car either ubs plugged in, or bluetooth. ANy one else have that issue?

Having trouble with music apps shutting down, even after I swipe them off the screen. They go off then come back on in a few minutes. This happens in my car either ubs plugged in, or bluetooth. ANy one else have that issue?

Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

Macbook pro keeps cutting out then wont turn on for a while then when it does same thing happens! Does any1 have any idea what the problem is?

Macbook pro keeps cutting out then wont turn on for a while then when it does same thing happens! Happens with charger plugged in or not and green charge light stays on even when it cuts out and cant be turned on! Does any1 have any idea what the problem is?

Try SMC and PRAM resets:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Ciao.

Photoshop cs6 error "could not use the type tool because the target channel is hidden. happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point

photoshop cs6 error "could not use the type tool because the target channel is hidden. happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point. i really need to get thsi figured out. thank you.

You may have answered my question. I AM using the 64bit version of Illustrator CS6. I had no idea there were bugs in it that affected paths copied and pasted from Illustrator to Photoshop.
A bit more about what I'm trying to accomplish... I'm trying to follow Deke's tutorial (http://www.deke.com/content/dekes-techniques-018-creating-a-3d-pie-chart) which is already difficult since so much has changed between CS5.5 and 6, but then on top of that, I keep getting errors!
So I created the pie chart exactly as he shows and copied and pasted into Photoshop exactly as he does. Before submitting this post, though, I tried drawing just two very simple triangle shapes, copying them both and pasting them into Photoshop as a shape layer. The shapes weren't overlapping, but they were a part of the same shape layer just like the pie chart tutorial.
Thanks for your help. If there is anything else I should try before just giving up because of the 64bit bugs, please let me know.

TV Screen goes blank, pixilates, then comes back

We have 2 sets out of 4 that will pixilate, go blank for 5-10 seconds then come back. It is very intermittent, may work fine for hours then will do this for several hours. All cable connections are tight, tv's are new. Any other ideas?

Fishermanwr wrote:
We have 2 sets out of 4 that will pixilate, go blank for 5-10 seconds then come back. It is very intermittent, may work fine for hours then will do this for several hours. All cable connections are tight, tv's are new. Any other ideas?
Try swapping the connections at the splitter: The 2 pixilating ones with the 2 that are OK. See if the problem goes with the switch. If it does then it's the splitter. By the way this is strictly a guess.

My ipad keeps cutting out and going back to start up screen, my ipad keeps cutting out and going back to start up screen

my ipad2 keeps cutting out and going back to start up screen?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

When I close Firefox and then come back to it layer a box comes up that says it's already running. It ays to close Firefox first but when I hit close nothing happens and the box comes up again. I have to shut down my computer and restart to get into Firef

When I close Firefox and then come back to it later a box comes up that says it's already running. It says to close Firefox first but when I hit close nothing happens and the box comes up again. I have to shut down my computer and restart to get into Firefox again. If I can't get this fixed I will start using someone else. Someone told me a way to close Firefox but I forgot what they said.
== This happened ==
Every time Firefox opened
== a couple of months ago

Hello Brian.
You don't need to restart your computer to open Firefox again: you just need to close it manually through your application manager (CTRL+SHIFT+ESC in Processes tab). Anyway, hopefully this support article is what you need:
http://support.mozilla.com/en-US/kb/Firefox+hangs
What's probably happening is that you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

How can I transfer video taken with my iPhone to my iPad WITHOUT using a computer or iTunes? I'm going to Europe for a month and want to use my iPhone to take pics and video, then come back to the hotel room and use my iPad to edit/store each evening.

How can I transfer video taken with my iPhone to my iPad WITHOUT using a computer or iTunes? I'm going to Europe for a month and want to use my iPhone to take pics and video, then come back to the hotel room and use my iPad to edit/store each evening. I don't want to use my iPad to take the video...too large/bulky. And I WON'T have a computer with me...I purchased the iPad to take with me so I could use the RDC to my home computer and avoid taking my computer at all. Is this possible?

here is a cheaper solution than camera kit and a lot easier if you have WIFI available.
I use the PhotoSync APP (I think its a $1.99) will transfer videos and photos over WIFI to any other IOS device or even PC/MAC. Great app since I like doing video and photos on my IPHONE and transfer to IPAD2 without synching through computer or doing cloud based storage.
You can even send photos/videos from your MAC/PC to your IOS devices that way too. Makes it so much easier.
Here is the link;
http://www.photosync-app.com/

My 27in LED monitor goes black, pops then comes back on

Brand new 27in LED monitor goes black, popping sound comes from speakers (I think) then comes back on. Plugged into my brand new Macbook Pro 2.2 GHz i7. Unplugged every thing and it still does it. Has most recent firmware. Just started after five days of ownership. Do I need to take it back to the Apple Store?
JBP

Had a second-hand TV once (I am cheap -- sue me). One day the screen went fritzy and the room smelled of ozone.
Ozone is a big clue with regards to electronic equipment.

Single Beep, Display cuts out, then comes back

Similar Messages

Maybe you are looking for