Single Class Split Over multiple non-consecutive Days??

How do I setup in OLM a class split over multiple days for Example:
I have a Diversity Awareness Course and Offering. The Class is 2 days long, but not on consecutive days, they are a week apart.
Do I create a Day1 Class and Day2 class under the same course and make it a prerequisite to attend day 1?
From a reporting point of view this now shows as 2 classes when it is only 1; inflating the class figures.
Or Can I split it into 2 sessions under the same class?
What is the best way to do this?

Hi!
You can create a Class with two Sessions underneath it (one for each day). Make the Start Date for the Class the day the Class begins and set the End Date to correspond to the last day. Your Duration should be set to 2 Days. Learners will be able to view details for each session, and you can assign different instructors and rooms for each day if you use Resource Bookings in OLM.
Anne
Anne Saulnier | Synergy Codeworks LLC
[email protected]
603-864-9942

Similar Messages

Select non-consecutive days in Calendar input

Hi Experts,
I designed a form in WD and have a requirement, where I need to show up a calendar display of months in which an user should be allowed to select only non-consecutive days from it.
Also I need to get all those selected days at run-time.
Is it possible?? I know that calendar is a standard input of date UI element and totally confused as how I can restrict an user to select only non-consecutive days.
Please clarify and help me in this.
BR,
RAM.

Hi RAM,
Unfortunately, with the date navigator ui element, we cannot select multiple dates except the date ranges.
Work around solution:
I suggest you to go for row repeater, in which you can place date navigator ui element and user can add multiple rows: also you he can input dates by selecting single dates.
Here you can also restrict the user to select only non-consecutive dates.
Pls refer the wiki for an example:
steps to create row repeater ui element - Web Dynpro ABAP - SCN Wiki
Try to convince the user with this or you can also for a table with single row.
Hope this helps you.
Regards,
Rama

Allow multiple non-consecutive file selections

Hello
This was working like that in every file explorer since at least 16-bit Atari, so I'm not sure how to explain why I think it's necessary...
I would like to be able to select files 1-10 (1, Shift+10), then add files 40-50 (Ctrl+40, Ctrl+Shift+50) and have both ranges selected, then maybe to deselect 5-9 (Ctrl+5, Ctrl+Shift+9).
Why would I think this is viable request? Hmmm. Let's say that when this will work along with dragging and dropping files out of Lightroom, I will be closer to dump file explorer altogether when managing my files.
Thank You
m.

Sorry for not being clear. Yes I meant '50' as image no. 50.
So just to understand you better: on the Mac you can already select multiple non-contiguous image selections?
On Windows in 1.0 and 1.1 you can select one range of images (with Shift) and then add/substract individual images to/from it (with Ctrl). You cannot add/substract another range of images, though (with Ctrl+Shift). That is exactly the functionality I'm requesting. If that is what's possible on the Mac at the moment, we are closer to getting it on Windows.
Regards
m.

Any way to span a single iTunes Library over multiple hard drives?

I have a hard drive that is almost full and the only thing on it is my iTunes library. It is not feasible for me to get a larger hard drive as this one is already a 1TB hard drive. Now, I have seen I can create multiple libraries, with each library on a different hard drive if I wish. However, not only is most of the media in the library podcasts, using multiple libraries for a single iPod Touch would be a pain.
So, is there a way for the iTunes Library to span over more than one hard drive, but yet be a single library? It would make it easier to sync my iPod Touch.
Thanks in advance!

I'm assuming that I would have to "import" my old drive into the library
You don't import anything since your library is the same as it was. All those items are still in iTunes in the same location. The ONLY thing different is iTunes prefs -> Advanced.
Or am I wrong and it will have my previous media folder still in the library, and anything new would be put in the new media folder?
Yes & yes. Everything in iTunes will still be in iTunes, stay in the same location it is now and iTunes will use it from there.
Anything new added to iTunes will go to the location you set in iTunes prefs -> Advanced.

Sharing (synchronizing) a single iTunes library over multiple computers

Okay, i've been looking all over for a simple answer to this problem for a while and haven't found a solution that doesn't involve paying for third-party software or a lot of seemingly unnecessary hassle. Here's my situation:
I have an older 12" PowerBook G4 and a brand new MacBook Pro. I also have a Time Capsule and a 30 gig iPod, but i'm not sure whether they will be helpful or not for my situation. When i got my MacBook Pro, i let Leopard transfer all my info, so now both computers have the same login information, music library, iPhoto library, etc... But not for long, naturally. I want to use my MBP at home primarily and will spend most of my time on it, but i will also frequently be out and will be taking my PowerBook along as it is both more portable and less of a concern if something happens to it. What i want to do is to set things up so that my iTunes library (including playlists, ratings, and other metadata) is kept synchronized across both computers (perhaps via the Time Capsule?) and that any changes made on either mac will at least eventually be mirrored on the other without causing duplicates or loss of any files. I don't need to keep separate versions or sizes of iTunes libraries either; the hard drives are each large enough to hold the entire thing.
On a side note, the iPod only needs to be able to sync from the MBP, i think, though it would be nice to have the option to sync from either. Sadly, it’s not large enough to hold the whole library, so i can’t use that to go back and forth or anything.
Also, i wouldn’t mind if the library were only stored on the TC and the PB, since the MBP should be able to access the TC 99% of the time, but in that case the PB would have to compare its own library and metadata to that of the TC, while i’m not sure how the MBP would store its iTunes database on the TC and not its own drive. I imagine that, with the current implementation of iTunes at least, it would have to be all on the MBP and the PB, with the TC version merely a backup. In most cases, i should be able to reach both my TC and my MBP from the road over the internet, but i still want to have the library on the PB hard drive for when i don’t have a connection.
I wouldn’t mind a “master, slave” type setup either, with the MBP being the master, since with the only working optical drive and a faster connection, it will be doing most of my importing- but it’s important that the playlists and everything are the same and it sure would be nice if i didn’t have to remember not to make any changes from the PB. I don't plan on buying any music from the iTunes store and my entire library is DRM free, so that won't be a problem. Both systems are running the latest versions of all software and operating system (though i hear this may change with Snow Leopard...?)
And while we’re at it, doing the same or similar to my iPhoto, iCal, Addressbook, Documents, etc. would be nice. Perhaps something can be done with the entire Home folder that would accomplish all of this? I’m not sure if the fact that one is Intel and the other is PowerPC would put a hitch in that method though. There are some settings, such as the totally different trackpads, etc. that will not be the same, plus i’ll be using a lot of programs solely on the MBP, which is why cloning the drive is not an option.
I’d like to find a way to set this up using just Automator and maybe some Applescripts if possible, but if i do have to bend and go third-party, it would need to be solid.
I know my situation is unique (I’ve found a lot of people trying to synchronize libraries, say, with a spouse, etc. WITHOUT syncing the metadata- or people wanting different libraries on different computers to feed into the same pool, but those are very different cases, obviously) but i’m sure there are plenty of people out there with several different macs of their own who could benefit from this solution. Any help you can give towards this would be appreciated. Thanks!

I have a similar problem. Wish I had an answer but am struggling with a similar problem. My situation is this: I have a Imac and a Macbook Pro. I have the same 4 accounts on both and I sync them through '.mac'. It works fairly well. My goal is to get one Itunes library accessible from the 2 computers and the 4 accounts per computer. I am also using Time Capsule/Machine as well. I currently keep the Itunes library on an external drive (not TCapsule). So, my problem is this:
1. How to update from multiple accounts accross the two machines?
2. How to access Itunes store from all of the accounts on machine 2?
I am now trying to set up individual Itunes libraries for each account on machine 1 and share to machine 2.
In any case, this is not pretty and needs to be reachitected to support a multiple user environmet.

Running a single action, separately, over multiple folders

Hello all,
First time for me using this forum, therefore i apologise if this is listed incorrectly. I am trying to speed up my work flow by automating repetitive tasks. Now that I am getting more work to do, I’m trying to tie up some loose ends in my actions that I haven’t previously been able to figure out.
I shoot a lot of school photography and i use Photoshop to automate the process of adding each student’s image to a proof card which is printed and dispatched to the school. Now this process is really easy when it’s just a single shot per proof card. But for nurseries there are four different images per proof card. The action i currently use (proof card template would be open in Photoshop) asks me to open the four images, which then copies each of the images and pastes them into the designated area of the proof card, then asks me to save it, then removes the four images so that the proof card template is ready to accept another four images when the action is run again.
The issue i have is that I have to manually select the four images every time i run the action. It’s become a tedious, time consuming process as some of these schools have up to 200 proof cards to be made.
I’m looking for tips as to someway i can create an action that selects the first four images in a designated folder automatically, plays the action above, saves it automatically as basic file name (even "Proof1" would do!) Then automatically selects the next four images in the folder, runs the action, and automatically saves as 'proof2' and carries on going until its completed every image in the folder.
I’m not sure if this would be possible to divide each student’s four images into subfolders and use the batch tool run the action?
Any help would be appreciated.

I have a similar problem. Wish I had an answer but am struggling with a similar problem. My situation is this: I have a Imac and a Macbook Pro. I have the same 4 accounts on both and I sync them through '.mac'. It works fairly well. My goal is to get one Itunes library accessible from the 2 computers and the 4 accounts per computer. I am also using Time Capsule/Machine as well. I currently keep the Itunes library on an external drive (not TCapsule). So, my problem is this:
1. How to update from multiple accounts accross the two machines?
2. How to access Itunes store from all of the accounts on machine 2?
I am now trying to set up individual Itunes libraries for each account on machine 1 and share to machine 2.
In any case, this is not pretty and needs to be reachitected to support a multiple user environmet.

Inputting a single code/ content over multiple existing pages

I have created a website using Dreamweaver CS3. I am
attempting to insert additional links on my site without having to
do the same procedure repeatedly over 120+ pages. I have created a
link and entered it into my index.shtml page, and it has worked
great, but have failed to find a command to allow me to do it over
ALL of my site's pages in a one-step procedure. Please any help
would be greatly appreciated. Thank you for any and all assistance.

>i am not positive it will work with .shtml files
That's what "shtm(l)" means - it means that the page contains
a server-side
include!
> If your server is an Apache web server, select Virtual.
In Apache, Virtual
> works in all cases, while File works only in some cases.
>
> If your server is a Microsoft Internet Information
Server (IIS), select
> File.
> (Virtual works with IIS only in certain specific
circumstances.)
As far as I know, this is just backwards.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Brad Lawryk" <[email protected]> wrote in
message
news:[email protected]...
>i am not positive it will work with .shtml files but
maybe this will point
>you
> in the right direction?
>
> 1: Select Insert > Server-Side Include.
> 2: In the dialog box that appears, browse to and select
a file. By
> default, a
> File type of include is inserted.
>
> To change the type of the include, select the
server-side include in the
> Document window and change the type in the Property
inspector (Window >
> Properties), as follows:
>
> If your server is an Apache web server, select Virtual.
In Apache, Virtual
> works in all cases, while File works only in some cases.
>
> If your server is a Microsoft Internet Information
Server (IIS), select
> File.
> (Virtual works with IIS only in certain specific
circumstances.)
>
> Note: Unfortunately, IIS won?t allow you to include a
file in a folder
> above
> the current folder in the folder hierarchy, unless
special software has
> been
> installed on the server. If you need to include a file
from a folder
> higher in
> the folder hierarchy on an IIS server, ask your system
administrator if
> the
> necessary software is installed.
>
> For other kinds of servers, or if you don?t know what
kind of server
> you?re
> using, ask your system administrator which option to
use.
>
>

Using a single sequence value over multiple scripts (in a variable?)

Hi all...
I'm writing a number of scripts that insert rows into tables.
To better explain my point, I'll paste a simple breakdown of the scripts here as that will be easier to understand...
Script 1:
INSERT INTO WORKGROUP_DEPARTMENTS(ID, DEPT_NAME, DEPT_TYPE)
VALUES (SEQ_WGDPT.NEXTVAL, 'Staff', 3);
Script 2:
INSERT INTO WORKGROUP_SECTIONS(ID, SECT_NAME, WGDPT_ID)
VALUES (SEQ_WGSEC.NEXTVAL, 'Staff 1',
(SELECT ID FROM WORKGROUP_DEPARTMENTS
WHERE DEPT_NAME = 'Staff'
AND DEPT_TYPE = '3')
Script 3:
INSERT INTO WORKGROUPS(NAME, UNIT_TYPE, WGSEC_ID)
VALUES ('Staff Room', 3,
(SELECT ID FROM WORKGROUP_SECTIONS
WHERE SECT_NAME = 'Staff 1')
As you can see, in scripts 1 and 2 a new value is produced from a sequence (SEQ_WGDPT & SEQ_WGSEC respectively). Then, in scripts 2 & 3 (respectively) these values are inserted into another table.
What I'm trying to figure out is: can I do the same thing here without having to include the horrible SELECT statements in scripts 2 & 3 in order to find the ID, which was produced by the sequence in the previous script?
Unfortunately they do have to be separate scripts, and as such I can't call Sequence.CurrVal from a different script as other users may have used the sequence since it was used initially in the previous script. I could call it from the original calling script, and save it intop a variable, but I have no idea how to - even if it is the right idea!
I tried to insert the sequence value into a variable a la PL/SQL so that I could call this variable from the next script, but failed miserably as I'm rubbish!
Any help would be great. Thanks.

You can use PL/SQL, for example:
SQL> desc t
Name                                      Null?    Type
ID                                                 NUMBER
NAME                                               VARCHAR2(10)
SQL> desc t1
Name                                      Null?    Type
ID                                                 NUMBER
NAME                                               VARCHAR2(10)
ID1                                                NUMBER
SQL> desc t2
Name                                      Null?    Type
ID                                                 NUMBER
NAME                                               VARCHAR2(10)
ID2                                                NUMBER
SQL> create sequence seq_1;
Sequence created.
SQL> declare
2   prev_id number;
3 begin
4   insert into t values(seq_1.nextval,'A')
5   returning id into prev_id;
6   insert into t1 values(seq_1.nextval,'B',prev_id)
7   returning id into prev_id;
8   insert into t2 values(seq_1.nextval,'C',prev_id);
9 end;
10 /
PL/SQL procedure successfully completed.
SQL> select * from t;
        ID NAME
         1 A
SQL> select * from t1;
        ID NAME              ID1
         2 B                   1
SQL> select * from t2;
        ID NAME              ID2
         3 C                   2
Rgds

Pack HUs - pack a single BUNDLE over multiple BOX

Hi gurus,
In our actual model, we pack each SHU separately in a box package, or as multi level packing we pack multiple SHU in a single box package. We would now be interested to achieve a model with a single SHU packed over multiple box package, i.e. illustrated as follow:
Hierarchy level
Line identification
Material/Packaging Material
Packed quantity
Batch
0
3105639
WOODEN BOX
1
30070137000
BUNDLE
2
000001
4014378
918,000 KG
3003888501
0
3105640
WOODEN BOX
1
30070137000
BUNDLE
2
000001
4014378
918,000 KG
3003888502
Is it achievable?
Thanks & bye.

Hi Rich,
The combine files feature isn't available when you're using Reader for iOS. However, you can log on to the web interface at Adobe Acrobat.com using your Adobe ID and credentials, and use the Combine Files feature there.
Please let us know if you need further assistance.
Best,
Sara

How do I create a single PDF Portfolio from an Outlook 2011 email with multiple non-pdf attachments?

How do I create a single PDF Portfolio from an Outlook 2011 email with multiple non-pdf attachments?
Email has 3 attachments--some are not pdf. I'd like all three converted into pdf files along with the email itself, and all appear in the email's pdf portfolio.

I would also like an answer to this question.
I am trying to convert an Outlook email to a PDF, then all attachment are appended to the PDF as pages instead of attachments.

Possible to play a single embedded audio clip over multiple pages?

hi
i'm wondering if it's possible to have a single audio clip play over more than one page in an interactive pdf generated in indesign cs5.5? in the media preview it seems to work but when i export to pdf the audio stops playing when i move to the next page, even when the "stop on page flip" is NOT checked in the media object options box.
what i want is the oppositite of an object with multiple states; looking for a single media object with multiple pages. thoughts? i'm publishing song lyrics, need to have the audio playing through the whole text of the piece when it runs to the next page.
thanks

In the other forum I stated:
It can be done by choosing the right option but it has been my experience that the continuous playback only works in Adobe Acrobat and not in any version of Adobe Reader across different devices including computers.
Your best bet would be to publish an interactive Flash file and if you need that to be on an iOS device get someone with an iOS developer license to convert the published Flash file into an iOS app. You might even be able to convert the Flash file into an epub like a digital magazine but I am inexperienced with this aspect of InDesign. There are good tutorials that I've seen briefly on creating epub digital magazines from InDesign though so do some research on it and report back.
Have you explored any of this thus far? I hope you get some good results.

Why doesn't the calendar carry the event title over multiple days?

When creating a multiple-day event, the calendar does not carry the title over all of the days in the event. In IOS6, this worked, but with the new IOS7, it does not. Has anyone else had this problem?

Apple did design it that way.... Spotlight search will find calendar entries. See P. 195 of the User Guide... http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf
Settings > General > Spotlight Search

How to Split Single Outbound Idoc into Multiples

Hi guys
Hope you all are doing good.
Can you please let me know , How to Split Single Outbound IDOC into multiples.
I am looking for some sought of configuration in IDOC/from SHIPMENT Configuration level. Because this needs to be implemented for Shipment IDOCS. Please let me know if this can be done through configurations apart from implementing User exit or copying the outbound shipment function module.
Awaiting for your valuable replies.
Best Regards
Shiva

Hello,
1. Routes
2. Packaging used
3. Shipment Type
Regards
Waza

Calculating Elapsed time over multiple days

Hello Community!
I am creating a logbook for our aircraft and attempting to correctly use the DUR2HOURS function to calculate flight times. DUR2HOURS does a great job of converting take off and landing times into decimal format but runs in to trouble when take off is late on one day and landing is on the next day. For example: Takeoff at 21:00 and landing at 01:00 gives a large negative number. I am using the very basic formula =DUR2HOURS([ldg time]-[takeofftime]) I realize that my equation will not work when we land on the next day. How can I modify my formula to correctly calculate a duration over multiple days? Thanks in advance for your help!

if you enter the complete date and time then this should still work:
format the depart and arrival times:
You can then sum the durations as:
C13=SUM(C)
Rows 1 is a header and row 13 is a footer

View a single table-row as multiple rows in a GridControl

Hi,
is it possible to distribute the entries of a single row of a table/RowSetInfo over multiple lines of a GridControl?
I've seen an example on the Internet (http://www2.gol.com/users/tame/swing/examples/JTableExamples4.html) which does this without database connection but it seems as if it's necessary to replace the default JTable, TableModel and UI by customized ones. As far as I've seen it's not possible to replace the JTable which is used by a GridControl? So is there any other way to do this? (A modification of the JTable-UI itself doesn't suffice as the JTable yields wrong row- and column-numbers on mousclick-events and therefore the components of the second row are not enabled properly).
Thanks in advance
null

|I've seen an example on the Internet |(http://www2.gol.com/users/tame/swing/exampl|es/JTableExamples4.html) which does this |without database connection but it seems as |if it's necessary to replace the default |JTable, TableModel and UI by customized |ones.
You wont be able to replace the JTable. But you can change all the attributes on the internal table which the grid uses (see getTable() method). The datamodel for the grid is impemented by oracle.dacf.control.swing.GridDataSource. You can possibly extend this class. You can also change the Table column model and the renderers used by the Table.
|So is there any other way to do this? (A |modification of the JTable-UI itself doesn't |suffice as the JTable yields wrong row- and |column-numbers on mousclick-events and |therefore the components of the second row |are not enabled properly).
Could you expain how the mapping between cell renderer and the table (row, col) is done in the extended JTable - which class ?.
(http://www2.gol.com/users/tame/swing/exampl|es/JTableExamples4.html)
null

Single Class Split Over multiple non-consecutive Days??

Similar Messages

Maybe you are looking for