Single click way to toggle finger input on and off

While taking notes I use the pen input on my x200 tablet of course, but tend to hold the pen away from the screen. This allows the finger input to pick up my palm and make a mess. I was wondering if anyway had a program or registry key for toggling touch input, so that I could set one of my tablet buttons just to turn it on and off?

If you haven't found a utility that works yet check this thread out. The Tray Touch toggle app absolutely works!
HOLLA!
 http://forum.tabletpcreview.com/software/56322-apps-tablet-pc.html

Similar Messages

  • Is there a way to turn the camera on and off remotely?

    Does anyone know of a way to turn the camera on and off remotely? I have a client that wants to mount a camera to the ceiling to photograph large rugs on the floor. We need a way to turn the camera on and off remotely and I am lookin for a solution.
    Thank you.
    Aric Attas
    [email protected]
    www.photonlab.com
    Solved!
    Go to Solution.

    I have at least one Canon remote that I've used with my 7D's. Unfortunately, I don't have it with me, because today's shoot doesn't require it. So I can't give you the model number. (Models come and go anyway.) It has a shutter button that you can press halfway to activate auto-focussing, just like the button on the camera. But you do have to make sure that the camera has an IR sensor. On a Canon DSLR, look for it where the fingers of your right hand would cover it up; I think that's intentional, so that a spurious IR beam won't fire the shutter while you're taking hand-held shots. Also, check that the camera and the remote are compatible, e.g. that they agree on the frequencies of light that are to be used.
    Bob
    Boston, Massachusetts USA

  • Is there a quick way to turn Cellular Data on and off?

    I just sent this suggestion in to Apple:
    I have limited data on my Iphone 4s, well 2gb and I try to use my wifi as much as possible while home especially.  I don't know the technical term for it, but when you swipe up from the bottom of the phone and : wifi, airplane mode, bluetooth, do not disturb comes up to quickly turn those functions on and off wouldn't it make more sense to replace airplane mode with cellular data?  That way we can quickly access and turn cellular data on and off instead of going through the settings, cellular data on/off.  Just thought this would make our lives easier and hope you will consider it on your next update. 
    Does anyone know if I have the cellular data turned on, but the WIFI is being used first, if that still uses up my Cellular data?  I think I know enough that if the "verizon" is in the upper left corner that the wifi is being used through my router but then if my 3G is displayed than I'm going through my cellular data.  Sorry, I'm new to the Iphone scene so I'm still learning. 
    Ok, thanks in advance. 

    Actually, all the display of Verizon on the phone shows is that you are connected to their network, it does not show that you are on wi-fi, or cellular data. If the wi-fi fan is displayed, then you are on wi-fi. If the phone is displaying 3G then you are using cellular data. If you are connected to wi-fi, the phone defaults to wi-fi and will use that instead of cellular data. However, if the phone is not actively utilizing data and the phone goes into sleep mode, then wi-fi is disconnected. It will connect immediately after being awoken.
    Does this answer your questions?

  • Magic Mouse: Is there and easy way to keep switching scroll on and off

    I'm afraid I'm not very adventurous with Magic Mouse. The only feature I use is One finger Scroll - with intertia. Its great for web surfing. Trouble is its a nightmare for programmes like illustrator and inDesign where the page leaps about in a crazy way at the slightest touch. So, I currently spend all day going to System Preferences - Mouse - to switch the Scroll feature on or off. Does anyone know a better way of doing this? Is there a keyboard command? Could I set something up in Automator? The ideal would be on the mouse itself: Two taps turns it on, two taps turns it off. I've just downloaded an app called BetterTouchTool which I though would be an answer to my prayers - but I can figure it out.
    Any ideas, anyone?

    Thanks Capfred
    I've tried switching off inertia - but I prefer it for websites. Inertia is much faster and more fun to use. Annoying thing is, I never had this problem with the old Mighty Mouse because it was easy to avoid touching the little scroll ball when I didn't want to. My body language is obviously not cut out for Magic Mouse because sometimes when I'm reaching for it my finger must slightly slide across it before I grip it firmly. This isn't a problem on most websites because the only option is to scroll up and down. But in Illustrator and inDesign, this causes my carefully centred page to go flying left or right and I have to use a keyboard command to re-centre it.
    I'm sure I can't be the only one to have this problem!

  • The mall grid button in the upper-right corner of the page that toggles the images on and off in a new tab is missing how do I get it back?

    I had a problem with some malware/adware by the time I got it removed it had altered much of Firefox.
    I have managed to correct everything apart from the thumb nails of frequently used sites on a new tab. I know there should be a 3 x 3 grid in the top right corner but it doesn't show. How do I get it back, please?

    You can reset the <b>browser.newtab.url</b> via the right-click context menu to the default value (about:newtab) to get the new tab page with the thumbnails.
    *http://kb.mozillazine.org/about:config
    See this article about the New Tab page (about:newtab):
    *https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites
    If you do not keep changes after a restart or otherwise have problems with preferences, see:
    *http://kb.mozillazine.org/Preferences_not_saved

  • Toggle shortcut keys on and off (Pavilion dv100)

    Hello,
    Somehow the keyboard on my laptop has changed settings, and when I type a letter, nothing types on screen and instead it goes to the shortcut of that letter.  For example, if I press "H", the browsing history pops up, which is normally accessed with "Ctrl+H."  My Ctrl keys don't seem to be stuck - I can press both easily.  Is there a function to get my keyboard back to typing normally?
    Thank you.

    Hi and Welcome to Apple Discussions...
    Best thing to do, especially since you went to some trouble, is provide feedback to Apple here
    Carolyn

  • PcmanFM and single-click delay

    Howdy-ha, folks.  Does anyone know of a way to change the delay of (or do away with) automatic item selection on mouse hover in PcmanFM while using single-click mode?  I love this filemanager, and love using single-click, but it's irritating to have an entire selection range deselected because I can't hit a hotkey combo quickly enough.  Judging by the config file in ~/.config/pcmanfm, I'd guess not?  Or is there perhaps a third-party solution/work-around?

    I suppose Thunar could be considered a work-around, although I prefer PcmanFm.   Maybe I'll screw around with the source for it later today...  I know about as much about C as I do about the history of 19th-Century Appalachian quilting (I just arbitrarily assume it's written in C, which tells you what my qualifications for coding are), but I have an idea of where to start looking anyway.

  • How do you change to single click to open files and folders?

    How do you change from double clicking a file/folder, to single clicking (web style)?

    Finder > Preferences
    Turn it off it irks you. I find it exceedingly useful.

  • I have an Instacalc from the App store and I have forgotten how to toggle it on and off from the keyboard, does anyone know how?

    I can't remember how to toggle my Instacalc on and off using the keyboard. I got it free from the app store, I have a 13" MacBook Air, Yosemite. I must have got the instruction somewhere but I can't remember, could anyone help me please.

    Hi. Try this: From the iTunes Store front page, scroll to the bottom of the page. In the bottom left corner there should be a flag, in this case the French flag, click it and you 'll be presented with a screen to select the correct country.
    Stedman

  • Is there a keyboard shortcut to toggle the addons bar on\off?

    As the title say,now that Firefox 4 b8 has a button to close the addons bar,does a keyboard shortcut exist to quickly toggle this bar on and off ?

    There's a keyboard shortcut now that the released version 4.0 is around. It's
    Ctrl+/
    In most cases it works OK. However I have had a situation or two in which the displayed web page had its own meaning for this shortcut... and the web page won.
    I'm looking for a toolbar button that will toggle the add-on bar.

  • My track pad stopped working with a single finger/double click when I try to open emails, and when I try to open apps on desk top.  If I use two fingers, and then click open, I can open them.  Thank You for your help.

    My track pad stopped working with a single finger/double click when I try to open emails, and when I try to open apps on desk top.  If I use two fingers, and then click open, I can open them.  Thank You for your help.

    Greetings ascnephew8,
    It seems your trackpad isn't working as you expect it to. Have you reviewed the trackpad settings in System Preferences? The following article provides trackpad setting details which may help:
    OS X Mountain Lion: Change the way your trackpad works
    Thank you for contributing to Apple Support Communities.
    Best,
    Bobby_D

  • Is there any way to DISABLE/RE-ENABLE a SINGLE cookie with a SINGLE click?

    I'm unable to figure out a SINGLE-CLICK method for blocking/unblocking just ONE cookie.... for example, the data-sucking obscenely intrusive google.com cookie. (something I could put on the desktop and just click once when needed) I do flush History at the end of every session and I have the Toggle Favorites buttons for disabling Java&Flash but that's not practical when I've a dozen or more windows/tabs open.
    The frustrating click-heavy method Cor-el would likely suggest of drilling down thru FF's Tools> Options> Exceptions> path and then scrolling down to unblock and then re-block google.com quickly becomes tiresome during long surfing/researching sessions, and it wouldn't address google's First Party HTTPS cookie. I'm not even sure where google's First Party cookie is stored.
    FWIW, I rely on useful add-ons/extensions/plug-ins and FREE software - CCLeaner, SpywareBlaster, NoScript, Ghostery, AdBlock Edge and BetterPrivacy to tailor my "personal browsing experience" on various web sites that abuse eyeballs. I typically leave all 3rd-Party cookies blocked but that google.com and their HTTPS version are inherently the most persistent/egregious, especially as the HTTPS version exploits the First Party cookie rule. Maybe I'm overlooking an obvious settings workaround but I suspect what's really needed is a dedicated PurgeBlockKillGoogle utility or a command file that modifies a Registry entry or a FF session setting with one click.
    If anyone can point me to a plug-in, add-on or browser independent DOS command or utility that accomplishes this, I'll personally petition Santa to bring you 2 new front teeth for Xmas! Even a one click method of opening FF's EXCEPTIONS would eliminate about 50 clicks a day. Seriously, help would be greatly appreciated.

    Been years since I've seen mention of Cookie Monster. For some reason I thought it was paid software, didn't know there was a plug in, happy to give it a try and see if it'll do the trick. Thanks!

  • The letter keys on my MacBook have stopped working and the trackpad (or external mouse) are treating a single finger click as a double finger click

    The letter keys have stopped working on my MacBook. Number keys and punctuation keys seem to work fine. Also, the trackpad treats a single finger click as a two-finger click. I tried an external mouse and this does the same.
    If I restart, the mouse works fine but after a few minutes the issue starts. I have looked at a few forums and have checked the settings under system preferences but nothing jumps out at me :-(
    Any ideas???

    Is this one of the MacBooks with a removeable battery? If so, try removing the battery and restarting the MacBook (obviously while plugged in to an AC adapter) and test to see if you still have this issue. Other users have reported that swollen expanding batteries have caused keyboard and trackpad problems.
    If that isn't it, let us know, we'll keep helping you.
    Best of luck.

  • Is there a way to change double-click to single-click?

    My dad has trouble double-clicking on folders. He recently got an iMac, and he's used to the single-click option on Windows. Is there a way to set up single-click on Mac OS X?

    The lack of single click mode this is the most glaring, problem that the mac has, it globally affects everything you do. Macs are great mostly because they are "dumbed down" but lets face it there are some qualities that are missing because the OS development has not been any comparison to windows. Macs have only had a two button mouse for a couple of years! If you are a light user of email, photos, etc (most of us) you will say whats all the complaining about? ..but if you use your mac for real work & know the advantages of single click mode, it is a nightmare. A person has to know ALL the adavantages to single click mode to appreciate what I am saying.

  • Problem in Printing of mutiple form on single click

    Hi all
    I m wrking on AFS and i had created a page for printing multiple invoice print on single click.
    A range of invoice is given as input and get out in the form of print preivew or print wat v choose .
    I mean a print pop is open for multiple invoice in a single click.
    Problem in printing of multiple form is speed .its going to be slow when click for printing .OR
    v can say that creation of multiple page in printing gets more time .Is ther  any way to solve  this .
    Plz suggest me some solution for that .
    Regards,
    Ravi

    Hi
    Check if Note 353518 - Selection of outputs takes much time and Note 910976 - Selection of output from billing (VF31) are relevants.
    Other suggestion. Do a trace with ST05 and check if you have any bottleneck in the coding that you can have in your Smartform or in your SAPscript, so check in tcode V/40 what form you are using . Also see Note 185530 - Performance: Customer developments in SD.
    I hope this helps you
    Regards
    Eduardo

Maybe you are looking for

  • How to install optional content on ext. HDD

    I read on the Logic Studio page that the HUGE files I can put onto a seperate disk(I don't want 40 gigs sitting on my main drive) but when I go through the installer the only thing selectable is my main drive, the other two(an external and a flash ca

  • Creating .pdf from a certain word file results in "2-layer" scrunched/superimposed text in places

    Whether I export this certain .docx file from within Word 2007 or I import the file from within Adobe Acrobat Pro X, the same thing happens. It only happens on a few pages, but it's enough that people are losing their minds. Thoughts? This is what it

  • Maintenance of View V_DFKKCJM requires workbench request

    Hi everybody, I have the following problem with maintenance of view V_DFKKCJM (tcd FPCJM): Changes are recorded in a workbench request and thus, the view can only be maintained in clients which are opened for repository changes. The view is client-sp

  • Why is Aperture 3.1.1 trying to connect to google?

    I've done nothing to try to get online anywhere, yet Aperture 3.1.1 is trying to connect to buttons.googlesyndication.com as well as id.google.com. Why is it doing this?

  • Using MSDN licenses in Azure

    Hi This may or may not be the right forum to ask this question but I cannot find a relevant forum to post to. Does anybody know if MSDN licenses can be used in Azure outside of an MSDN-activated subscription? In all the documentation I have read, it