Single Client Access Name for Weblogic Forms and Reports.

I have a 2 node clustered system:
Windows 2008 R2 64-bit
Weblogic 10.3.3 (on each node)
Weblogic Forms and Reports 11.1.1.3 (on each node)
Database 11gR2 RAC 11.2.0.1 (on each node)
The forms and reports are clustered and I can connect to each from each of the two servers and the cluster is working well.
The database uses Single Client Access Name (SCAN) to present the database as if it were one server called dbserver1.
I was wondering if there was a similar thing for Weblogic and what everyone else uses to present their application as a single name to the user.
I tried using Windows Network Load Balancing, but this stops the database scan listeners from working.
Thanks.

Dear,
Did you find an answer to your question back in 2009?
We are facing the same installation architecture, but we do not find any concrete information regarding SCAN with Oracle Forms 11g
Geert

Similar Messages

  • Difference bewteen Single Client Access Name (SCAN) & Grid Naming Service

    Hi ,
    Whats the difference bewteen Single Client Access Name (SCAN) & Grid Naming Service in 11g RAC R2?
    Regards,
    Stephen

    Hi Stephen,
    There is a very good document about it (http://www.oracle.com/technetwork/products/clustering/overview/scan-129069.pdf).
    Best regards,
    Gennady

  • Fusion Middleware 11g Weblogic, forms and Reports in Solaris  11 zone

    Hi,
    Any one Installed Fusion Middleware 11g Weblogic, forms and Reports on Solaris 11 zone ??
    So Pls Let me know Weblogic and Fusion Middleware 11g versions which are working
    I try
    Weblogic 10.3.3 Installed 64 Bit Went OK
    Fusion Middleware 11g 11.1.1.2.0 Errors While Relink few items like frmbldr etc
    Then Fusion Middleware 11g Patchset5 11.1.1.6 Still Same Errors Relink few items like frmbldr etc
    Then Cconfig.sh failed at create domain
    Regards

    Hi Deepak,
    Just config.sh or config.cmd file and try to change the JDK with in and try to configure new domain from there.
    Regards,
    Kal

  • Is there any impact analysis tool for Oracle Forms and Reports

    Hi All
    We are curretly looking at tools available to do impact analysis in Oracle Forms and Reports. This is for the maintainance of a large Oracle application developed using forms and reports 10g. We use Oracle Designer but only to maintain the db structure and not for forms and reports generation. Our intension is to find out the impact of db model changes, stored procedure changes in Oracle Forms and Reports. Please suggest any tools that are currently used for this purpose.
    I remember manually maintaining the CRUD matrix for Oracle Forms and Reports for maintainance purpose. CRUD matrix will have the list of all the tables which are affected by the module. But this is a manual activity and hence the responsibility is with the dev team to keep the document updated. Please suggest if there is any alternative to this way which can be more effecient and less error prone...
    I also wonder how these are done in Oracle ERP? how the apps team in oracle is maintaining the forms and reports?
    Thnaks in Advance
    Mahesh Mathew

    Quest (the makers of TOAD) have a tool called SQL Impact which gathers data from forms, reports, triggers, packages etc.
    FormsMate is a simple, cheap alternative for comparing or searching in forms.
    http://www.jockvale.ca/products.html
    Alternatively, you can export forms to xml (with iff2xml90.bat) and reports to jsp (with rwconverter) and simply grep those and your sql scripts. There are grep tools for windows if you need.

  • Latest version available for Oracle Forms and Reports in 11g AS

    Deaer Friends,
    Please let me know latest version available for Oracle Forms and Reports in 11g Application Server and let me know whether it is supported in Windows - 64 Bit Platform
    Regards,
    DB

    DB,
    Oracle Forms and Reports 11g Release 2 (11.1.2) is the most recent forms and reports.
    If you're on 11.1.1.x (for example 11.1.1.5 or 11.1.1.4), please refer to http://docs.oracle.com/cd/E24269_01/doc.11120/e23975/upgrade_from_r1.htm for upgrade procedure.
    Otherwise, if you're installing it brand new, download Oracle Forms and Reports 11gR2 (11.1.2.0.0 from http://www.oracle.com/technetwork/developer-tools/forms/downloads/index.html
    HTH,
    Raj Mareddi
    http://www.freeoraclehelp.com

  • How to know report server name in oracle forms and reports with weblogic server 10.3.5

    Hello Experts,               I am new in oracle forms and reports.I have installed Oracle forms 11g with weblogic server 10.3.5 at windows 7.Forms and reports are working well.But I want to call a report from an oracle form button press trigger. For This I need to know the my report server name which i dont know.Please tell me how can I know my report server name.

    I want to call a report from an oracle form button press trigger. For This I need to know the my report server name
    You can find the name of the standalone reports server in $ORACLE_INSTANCE/config/ReportsServerComponent.
    Or you can use Fusion Middleware Control Console, normally at  http://<machine name>:7001/em

  • Installation errors in weblogic forms and reports

    hi,
    i am doing the patches of oracle middleware forms and reports 11.1.1.3.0 to 11.1.1.4.0.we created 2 domain in weblogic home.Domain names like A,B.patches done successfully in A.at the time of patch in B.installation is not starting it is shows an error in GUI box like
    installation failed
    prepare session filled
    SEVERE:Values for the following variables could not be obtained from the command line or response file(s):
    MYORACLESUPPORT_USERNAME(MyOracleSupportUsername)
    Silent install cannot continue.
    this is error log file path is middleware/oraInventory/logs/
    <wladmin-wls logs> tail -f oraInstall2011-02-16_03-39-53PM.err
    oracle.sysman.oii.oiic.OiicInstallAPIException: SEVERE:Values for the following variables could not be obtained from the command line or response file(s):
    MYORACLESUPPORT_USERNAME(MyOracleSupportUsername)
    Silent install cannot continue.
    at oracle.sysman.oii.oiic.OiicInstallAPISession.prepareForInstallOperations(OiicInstallAPISession.java:292)
    at oracle.sysman.oii.oiic.OiicAPIInstaller.prepareForInstallOperations(OiicAPIInstaller.java:844)
    at oracle.as.install.engine.modules.install.action.OUIInstaller.start(OUIInstaller.java:300)
    at oracle.as.install.engine.modules.install.action.InstallManager.launchOUI(InstallManager.java:211)
    at oracle.as.install.engine.modules.install.InstallModule.launchOUI(InstallModule.java:155)
    at oracle.as.install.engine.modules.install.InstallModule$1.run(InstallModule.java:246)

    When you look at the example presented in here: http://download.oracle.com/docs/cd/E13196_01/platform/docs70/confgwiz/silent.html
    or here: http://middlewaremagic.com/weblogic/?p=1716
    I think you must add a datavalue MYORACLESUPPORT_USERNAME is the template (also probably a password).

  • Is Windows 7 64 bit support for Oracle Forms and Reports 6i version

    Hi All,
    Greentings!
    Its urgent requirement from customer to Install Oracle Forms and Reports 6i Client software in Windows 7 64 bit OS.
    Can any one please help me to download and Install the same. It would be great if you send me the download link and steps to Install.
    Many thanks in advance!
    Kind Regards,
    Mohan

    That is a very very old product. It does not look like it is certified on that OS.
    Forms 6i Documentation
    http://www.oracle.com/technetwork/documentation/6i-forms-084462.html
    From
    http://download.oracle.com/otn_hosted_doc/forms/forms/A73154_01.pdf
    1.2.1.2 Operating System
    This version of Forms Developer requires Microsoft Windows. Specifically, one of the following versions:
    Windows 95 (any version)
    Windows 98 (any version)
    Windows NT (Service Pack 5 or later)
    For certification you should check with Middleware Certification (MOSC)

  • Weblogic, Forms and reports 11g - help with report server

    Hi Everyone
    To start with i'm very new to forms and reports (3 months!!!) so my question may sound a bit silly.
    At the moment we have 10 apps using forms and about 6 of them using reports. All the reports get run from the forms. We are upgrading forms and reports from 10g to 11g and the dev teams are not willing to recode the forms to pick up ENVID's etc. i have 1 reports server running and have configured to run one of the apps reports but my question is how do i get the other apps to run under that report server, can this be done.
    I have thought about creating a report sever for each app but not sure if this is best practice and a bit over kill.
    Would i be wrong to create a report server for each app.
    Thanks
    Edited by: Zantie on May 11, 2011 2:27 PM

    Hi,
    If both apps are using the same middle-tier home, then forms built-in run_report_object should submit reports to the this url. i.e <protocol://<mid-tier or LBR>:<port>/reports/rwservlet?. Assuming you are using the in-process reports server no need to specify reports_server parameter. Also if the envid is missing, you can move all the .rdf or .rep files to the default reports server directory $mid-tier_home/reports/samples/demo directory.
    Leonard

  • Tcode for HR Forms and Reports

    I am working on HR Forms and Reports. Can you suggest Which Transaction codes I have to use for Forms creation and changes.

    Use Tcode PE51 for maintaining forms

  • Reference book for oracle forms and reports???

    any one knows any good book 2 learn oracle forms and reports 10g?
    Edited by: rupearlkaushal on Jun 7, 2012 3:26 AM

    Oracle tutorial..
    Although the first two of the following links are for older Forms versions, the concepts are still valid across all Forms versions.
    A Tutorial on Oracle9i Forms and Reports
    iSelfSchooling - Basic Introduction to Forms
    Oracle Forms 10g: Demos, Tips and Techniques
    http://www.dotnetspider.com/resources/22433-Triggers.aspx---Different Trigger types
    http://sheikyerbouti.developpez.com/index_en/
    http://www.slideshare.net/magupta26/oracle-forms-tutorial
    http://www2.cs.uh.edu/~ceick/3480/Customized_Oracle_Forms.pdf ---Creating Customized Oracle Forms
    http://www.youtube.com/watch?v=0BBiHvHzPYE -- video
    Hope this helps,
    Oracle Reports Tutorial...
    Here few link...
    1. http://docs.oracle.com/html/B14364_01/title.htm
    2. http://www.scribd.com/doc/3960412/Basic2-Oracle-Reports-10g-Tutorials
    Video Tutorial
    http://www.youtube.com/watch?v=Fum3MJm5yKU
    Hope this helps
    If someone's response is helpful or correct, please mark it accordingly.

  • Study materials for Oracle forms and reports

    Can somebody plz tell me some links where i can get the complete study material on Oracle Forms and Reports from its basics to advanced level.I tried to find at oracle site but not able to get it...plz help me..

    Sir i searched and the basics but i need advanced along with basics...
    My mail ID- [email protected]
    Sir plz send me...i m waiting
    thanks a lot sir...

  • Access denied for Association form and Initiation Form in SharePoint 2013 Workflows VS2012

    Hi,
         We created one simple Sharepoint 2013 approval workflow that has custom association and initiation forms. The workflows works when the workflow is created by the site owner. But when a user with edit permissions try to start a workflow
    or associate a new workflow we get Access Denied error message. I believe this permission is somthing todo withthe workflow list wfsvc where these association form and initiation forms reside. What else could be missing here?how do i check permission on the
    wfsvc list. please help. User also have create and edit permission on the workflow history and workflow task lists.
    Thank you

    If it works with Full control permission then there is something on the site which is causing this issue. 
    Try to collect HTTPwatch or fiddler trace to check more details. 
    Also You need to enable Verbose logging to check details. If possible paste the verbose logging in the comments. 

  • Patch 13 for oracle forms and reports

    I cant find patch 13 for oracle forms can you please tell me where I can download this patch from?
    Thanks,
    Sadiya

    Hi,
    As far as I know, there are not any new books, you could use this one which for forms 6/6i:
    Oracle Certified Professional Application Developer Exam Guide (Oracle Press) (Hardcover) by Jason S. Couchman,
    ISBN-10: 0072119756
    ISBN-13: 978-0072119756
    Or
    You can start with these:
    http://www.oracle.com/webapps/online-help/forms/10g/state?navSetId=_&navId=0
    http://www.oracle.com/technology/products/forms/techlisting10g.html
    Also download and install the demos:
    http://www.oracle.com/technology/sample_code/products/forms/index.html
    Regards,
    Hugo

  • SCAN (Single Client Access Name) not working properly

    We are in the process of upgrading to 11.2.0.1.0 RAC (4 nodes) running Grid Infrastructure and SCAN via DNS. The setup went great as did the data pump. However when trying to connect to the SCAN address I am getting an ORA-12154 error. My TNS entry is as follows:
    FMRQ=
    (DESCRIPTION=
    (ADDRESS=
    (PROTOCOL=TCP)
    (HOST=ncc1701rac-scan.dsd-k12.net)
    (PORT=1521)
    (CONNECT_DATA=
    (SERVER=shared)
    (SERVICE_NAME=fmrq)
    If I change my Service_Name to be fmrq1, fmrq2, fmrq3, or fmrq4 which just so happen to be the SID's for each of my nodes I am able connect. I'm sure that I have missed something simple, but due to the lack of detailed documentation about how SCAN works I am not able to troubleshoot this on my own. Help is most definitely needed.

    Thank you for the reply. I have been trough that document several times trying to see if I missed anything. This all seems very straight forward which is why I am so confused as to why it isn't working. I have noticed that when I run "lsnrctl status" I see
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.6.22.41)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.6.22.51)(PORT=1521)))
    Services Summary...
    Service "+ASM" has 1 instance(s).
    Instance "+ASM1", status READY, has 1 handler(s) for this service...
    Service "fmrq" has 1 instance(s).
    Instance "fmrq1", status READY, has 2 handler(s) for this service...
    The command completed successfully
    but when I run "lsnrctl status fmrq" I see:
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER_SCAN4)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.6.22.34)(PORT=1521)))
    Services Summary...
    Service "fmrq" has 4 instance(s).
    Instance "fmrq1", status READY, has 2 handler(s) for this service...
    Instance "fmrq2", status READY, has 2 handler(s) for this service...
    Instance "fmrq3", status READY, has 2 handler(s) for this service...
    Instance "fmrq4", status READY, has 2 handler(s) for this service...
    The command completed successfully
    So by this should my service_name "fmrq" work correctly?

Maybe you are looking for

  • Apple devices will not print to Officejet 6700 including MacBook Pro and iPad

    I am trying to help someone set up their MacBook Pro and iPad to be able to wirelessly print to their Officejet 6700. I recently set them up with a new Apple Airport Extreme for their router. The printer connects fine to the wireless network. Everyth

  • Release Group for PR Release Strategy

    Hi , When i am trying to define new "Release Group" AA , with Class "Z_PR" (it has Plant and Item Value as charcteristics ) , I am receiving message "Please Check Release Classes" , Message no. ME492.It doesn't allow me to save this new release group

  • Enabling Barcode Reading feature through Forms 6i.

    Hi, I would like to get some help from anybody. I would like to add Barcode reading feature in my Inventory Management application written in Forms 6i. Could anyone tell me what exactly i must do to achieve this using Forms 6i's OLE features. If any

  • C4C - Binding of Sales Quote Price Details in Output form

    We have designed a Sales Quote Output Form using ADLC for SAP Cloud for Customer (C4C). The requirement is to print both header and item level price details like Unit Price, Tax%, Tax Amount, Discount %, Discount value etc on the output form. We are

  • No bridge forum for a bridge question (??)

    I have a bridge question so if this is not the right place please send it to wherever moderators Is it possible to run/have/use/purchase bridge without photoshop? Cost of ? (link) I have PSE12 and don't need the big brother PS programs ....     more