Single condition for contract and domestic sales

Dear All,
I just want to know is there any possibility to go with one condition type for contract and regular sales as in case of regular price will be determined automatically and not modifible, where as based on the requirement contract price condition will be created.
Now under this process there is a problem and it is picking contract price in regular sales order also, but i want contract price need to be triggered only when it is referenced.
Thanks
Srini

Hi,
As I understood you want to have same Condition type (Say PR00) to have in both Sales Document types. (In other words to have same condition type in both pricing procedures used for Contract & Sales Order)
Since you want to set "Not modifiable" when it's in the sales order & when it's in Contract you want to manually enter same condition, this is not possible.
Because, "Manual entries" control is inside the Condition Type.
IMG Path:
Sales and Distribution -> Basic Functions -> Pricing -> Pricing Control -> Define Condition Types -> Maintain Condition Types
Therefore you can set it only for a condition type. Where is for PR00 it's either "Manual entry has priority" or "No limitations" or "Automatic entry has priority" or " Not possible to process manually"
Therefore you cannot have same condition to satisfy both requirements. In that case you have to have 2 condition types,
Best regards,
Anupa

Similar Messages

Conditions for Contract and SA

Hi
I have prcing proceure attached to schema and vendor. But when I go to create a scheduling agreement and in item conditions I do not find those conditions which i find in standard PO.
Even in Purchace Info Record conditions I am not able to find the same.
Regards
Eldee

The reason is you have created new pricing procedure and did all other config so it is available in the PO but not in the other document
First of all the pricing procedure you have created has to copy to other pricing procedure and give the name as Supplement Price and remove the PBXX condition from this pricing (second gross price)
Then go to your main gross price ciondtion like PB00 and add the supplement pricing procedure in the condition (master data section)
now you will see this pricing in the Info as well as in the SA

Different GL Codes for export and domestic behind account key ERL

Hi all,
I have created separate pricing procedures for export and domestic sales. The issue is that condition type PR00 is used in both procedures and the acount key behind PR00 is ERL. Now the issue is that from finance side, if i have to segregate revenue from export sales and revenue from domestic sales then how can i do that as the gl code is same in both procedures.
Please respond.
Best Regards,
AI.

Hi
In account determination procedure you could use two different access sequence such that for domestic revenues 1st access will come into picture while for export the other one.
try and revert

Diff pricing procedures for contract and invoice

Hi all,
My client is into service industry.He is using two pricing procedures for contracts and invoice. Now the requirement is they want to use a single pricing procedure for both contracts and invoice. Now i need club them into one and i need to delete some condition types which are not in use.What are all the factors do i need to consider before clubing them into one??
Can anybody guide me in this regard?/

You need to foreclose all your existing contracts and create a new one with the new pricing procedure
G. Lakshmipathi

Sales order with reference to Contract and another sales order

Hi Gurus,
I would like your suggestions on one of the business requirement i have.
We are creating a new EDI interface with few of our customers to create sales orders. While creating sales orders, it should validate if there are any open contracts available and if yes, then the sales order should be created with reference to it. so far good but there are chances that sold to party on the contract could be different from sold to party on the EDI order sent by customer (customer can have more than one sold to party on their system). IDOC's are failing in this scenario and not able to create a sales order since sold to partys are not matching. I need your help.
Can we do some thing in customer master to handle this scenario?
or
Create a new sales doc type (YEDI or some thing) and create sales order from IDOC without reference to contract. Business will look into all YEDI order and create the actual sales order out of it but the challenge here is i cannot refer contract to the actual sales order or YEDI order.
Is it possible to create sales order with ref to a contract and another sales order?
Please help
Thanks
Venkat

Hello Venkat
What is the linkage between sold to party of contract and sold to party of order..If customer has more than one sold to party.
Why don't you use customer hierarchy....link all sold to party of a customer to hierarchy node.for example...you create a hierarchy node 1000 and assigned customers 2000 and 3000 to it.you have contract for 2000..so when you create a sales order for 3000 check in knvh table it's customer hierarchy 1000 and get all sold tos assigned to hierarchy...which is 2000....check if contract exist for sold to's..If yes then create order with reference.
Let us know if it works for you.
Thanks
Amit Gupta

Security Approach and Plan for single logon for Essbase and Reports.

Please any one can suggest me, how can I do the Security Approach and Plan for single logon for Essbase and Reports by using Maxl or Administrator.If any one have code,please forward to my email Id: [email protected]

Once you are logged in to the "Hyperion Portal" as you call it, your user credentials are automatically passed among all the components. Therefore, a lot of the logic you created to pass credentials between BQY files in a desktop environment are no longer needed.

Single SLD for EP and PI

Hi Experts,
I plan to have a single SLD for EP and PI.
EP is on a diff box...now when im configuring PI after installation...
what do i do?...In tech systab under ep sld i dont see any entries for exchange infrastructure..ne idea?
can i have ur views pls?

Hello
If you wish to use a central SLD on the EP box, you will need to apply the notes below:
1) #720717 Reduce the number of System Landscape Directories (SLD)
2) #768148 Using a separate SLD for XI
Regards
Mark

I am not using condition for Approval and Rejection.

Hi Balaji,
I am not using condition for Approval and Rejection.
I am using Decision.
I am not able to find the error.Rejection is going on Successfully.
I am to rectify this error from past 4 days.
Can you give the solution.
Regards,
Chow.

Hi chow,
What is the condition that u are using the Condition Statement.
Please check the status returned from the Approval Process, by analyzing the Workflow Log for the particular step.
Think there is a problem with the condition statement.
Regards,
Raj

Single URL for internal and external CRM access when using IFD

Hello,
At one of our client site I have setup IFD on CRM 2011. This IFD is behind TMG. My client is a big corporation therefore all CRM components including CRM, ADFS and SQL are on separate servers.
I have configured IFD using single url https://orgname.contoso.com Their IT staff wants to know why can't they use single URL for internal and external access where internal users are nto prompted for authentication
when logging on to the CRM server. I know you can do URL re-write in ADFS but they want to know the reason "why internal users can't use the same IFD URL and don't get prompted for their credentials". Text below is from their IT staff.

There are several approaches to your question. You need to set up both an internal and an external relying party trust. If you use the external URL, it will always direct you to the signin page, if you use the internal URL, it will resolve you single
sign on.
I've configured IFD for CRM multiple times, and this is how it works. CRM looks at the URL. If you use the external URL (org.domain.com), it will prompt for credentials. So what you are asking for, a single URL that works single sign on internally and prompts
externally really isn't possible.
What I recommend is:
1. make the external URL available internally
2. Configure all outlook clients against the external URL, that way you won't have to reconfigure when someone goes internal to external
3. Have users who are primarily internal use the internal URL for the web client, which will resolve single sign on
4. Have users who are primarily external use the external URL for the web client
For #1, since you only need to enter the credentials when you first configure CRM, it is in all effects single sign on.
One thing I haven't tried that may work is using IIS redirect internally to redirect the external URL to the internal URL. There is also a powershell script in the IFD guide that you can use to make the outlook client switch between the internal and external
URL's, but nothing that will give you a single URL that works as the internal relying party trust when internal and the external relying party trust when you are external.

Approval for Contract and Order based on PO date and Document Date Combinat

Dear All,
I have a critical requirement from my client.
1. If the PO date in the contract is less than 10 days or more of the document date [Created date] then further process should not be allowed. Only authorized person should release the contract, and then order creation should be possible.
For example: Customer PO date is 18-07-2011 and if the document date is 28-08-2011, then system should stop for further processing. Only after release this should be allowed to proceed.
2. Sales order scheduled date for item is 30.07.2011 and if the PO date is 18.07.2011 again system should again go for approval. Business requires this because the time gap between the PO date and the delivery date is very short, so only on approval the next process should be allowed.
Is this possible through Status profile? I have tried this but I canu2019t give condition like if it less than the PO date system should go for approval.
Kindly guide me if this is possible and share your ideas.
Best Regards,
Venugopal

Hi Venu,
In user eixt USEREXIT_MOVE_FIELD_TO_VBAP (inlcude MV45AFZZ) write the code to compare the PO date and contract creatioon date and if the PO date is 10days less than the contract creation date reject all the line items with a special reason for rejection at the item level if the document is a contract or if the document is a sales order then populate a delivery block.
Regarding the authorization to release the contract you can think of below options.
Give authorization to only specific people to remove the reason for rejection or remove the delivery block.
Or
If you want to automate the approval process then based on the delivery block setup workflow which will raise an event and trigger an email to the approver inbox. For the approval you can give options like Approve/Reject. Based on the apporver's action design the workflow to change the contract accordingly i.e either removing the delivery block or keep it as it is.

One pricing condition for BOM and other for individual component

Hello SAP gurus,
We have two pricing condition types created and assigned in the pricing procedure which has been created with reference to PR00 and condition records are maintained for both the condition types.
But, we want only one pricing condition type to be triggered in the sales order depending on the usage of material in the sales order. As we are selling the same material individually and as well as a component in a bundle ( BOM).
i.e, when one pricing condition for BOM component and other for individual component
What are the configuration steps to be taken care to get this scenario?
Thanks in advance.
Regards,
KB
Edited by: K.byla on Jan 21, 2010 1:20 PM

Hi Sagar,
Thanks for your response.
Yes, we are maintaining only one material. The same material is used to sell individually and also in a BOM.
As i have mentioned earlier, whenever the material is sold individually it should pick condition type say 'YR00' and when the same material is sold as a bundle ( BOM) , it should pick condition type " YR01" in same the pricing procedure.
For both the condition types, the condition records are maintained.
To give the scenario details,
A material "X" is sold individually as a single component and the same material is also used for selling bundled with other material "Y" and the bundled material as "Z"
means, Z=X+Y
Pricing procedure used is say ZRA000 which contains currently the price cond type YR00.
Now for the bundle (BOM) involvement i want to use the same pricing pricing proc. and add the new cond YR01 in it so that the system will pick the cond.type YR00 when the material is sold individually and YR01 is taken as the price when the material is sold as a bundle against the item X.
Need to know the steps for this scenario and do i need to maintain a specific requirement ? please suggest.
BR,
KB

Conditions for contract workflow approval agent.

Y'all,
I would like to know if its possible to have conditions in the WS14000088 contract workflow to assign the approval agent/user depending on contract values, for example i mean:
"if the contract has an specific value at item level then assign the approval to the business unit manager... or if the contract has an specific value at header level then assign the approval to the category manager..." etc.. etc..
Is it possible? if yes, how do you commit it into the system?
Regards,
Gerardo.

Hi Jerry,
Yes it is possible to have a conditions to assign and determine the approval agents depending on the value of the contract.
Goto tcode SWDD and for the appropriate task in the workflow 'WS14000088' create the condition. The work item for this step can be executed when this condition for work item generation is met. If there is a requested start for this work item, this is checked separately when the condition is met.
Reward points if the answer is helpful.
Regards,
Andy.

Need error mssg for contract qty in sales order

Hi SD Gurus
I have created a Quantity contract for XYZ material with say 100 qty. Now if i create a Sales order with reference to the contract, in the sales order i can manually change the quantity to more than 100.
Here the system just gives me an warning message that qty has exceeded the contract qty.
I want to make it a error message. In short i do not want to create a sales order of more than the contract qty.
Checked completion rule for contract item category KMN. But its just giving warning message.
Regards
Abhijeet

Hi
Abhijeet
Please find my post on the same subject/ problem. Please click below link...
Call off order restriction
Check this as well...
Copy control to copy quantity from Order to contract
>OR
Please follow the path
SPRO --- Industry Solution Oil & Gas (Downstream) -MCOE (Marketing, Contracts and Order Entry)--Define contract restrictions agsinst yr sales doc type in the field of QTY PUT E.
Hope this helps you..
Thanks and Have a Nice Day !
DK:)
Edited by: Dwarkesh Thakkar on Jun 27, 2011 7:47 PM

Item condition for only one particular sales order type, manual condition.

Hi Gurus
We have one condition ZXXX, item condition and it should process manually for one particular order type, ZOR. it should not process for other document types like ZOR1 etc.
i did create condition table with S.org/dis chn/div/ sales.doc type. and kept in access seq. and same in condition type ZXXX. and mainatined condition record as with sales area and doc type ZOR.
condition type settings ate like item condition and manaula entries - no limitation.
in pricing procedure i didnt checked manaul, mandoatry and statistic.
but whn iam craeting in ZOR1 and giving manually condition ZXXX, its accepting but as per our condition record it should get only for ZOR... where iam missing the seeting, please suggest.
Thanks
Ramki

Hi Ram,
In my point of view i think so you have to create the new document pricing procedure.
after creating that you have maintain new item catergory determination procedure using the new document pricing procedure created before.
assign this document pricing procedure to your ZOR document type.
now create new pricing procedure by copying the standard one.
after that do the assigning procedure for the pricing procedure by using the new document pricing procedure.
then try to create the order with ZOR and also with ZOR1
Make sure that your condition type is not assign to any other pricing procedure.
if it happens then let me know also.
Suneet Prakash

Singl GL for vat collected on Sales

Hi
My client requires a single GL for VAT/LST/CST. The standard SAP reports provide for a condition type and region based VAT collection. However, the user faces a problem while remitting the payment for VAT. There are so many line items, that he is not aware how to select the open items for making payments for vat/cst/lst. How can we select the open items for a particular location using a single location
Regards
Sanil Bhandari

na

Single condition for contract and domestic sales

Similar Messages

Maybe you are looking for