Single Display output (HD LCD TV only)
Hi.
I've connected my iMac to my HD LCD-tv (Mini-dvi -> dvi -> hdmi -> Sourround Receiver -> TV), and the picture & sound quality is excellent. Although the display options only show 1080i on the iMac, both the receiver and the TV confirm the signal as 1080p (the display options allows me two different 1080 settings - and one of them is confirmed by the other HW as a 1080p signal). So no problems there.
The thing is only want output on the TV - not both screens (TV + iMac). Just like my old PC - switching back and forth as desired.. I've exhausted all display settings on the iMac - but no success yet.. Please help..
Never mind - posted this in the correct forum now.
Similar Messages
-
Thunderbolt Display output only 800 x 600!!?!?!?!
Just got the Mac Book Pro Quad Core, 15", 8 gig ram.
I'm using the display output adapter in the Tunderbolt port. It outputs and syncs to my Image Pro switcher, but the options for the display output for the external only go up to 800 x 600.
Anyone know anything about this?
My old MacBook Pro could go up to the full resolution with the same video switcher and the same mini display output adapter.It's possible that the switcher isn't compatible. Safe to presume that without the switcher you can achieve the desired resolution?
-
Only "single display" possible
i have a problem with my gf4 mx440!
everything runs fine on my old pIII800 but i cant clone my desktop to my tv! i alway got to change my primary monitor to watch films on it.the only option i have is "single display" under nview! i already changed my drivers and tested version 61.77,66,93 and 67.02 (guru3d.com) but no change....
any suggestions? i want to clone my monitor and my tv!!!Uhm i've a similar problem but ......
I've a Msi Gforce 6800GT 256Mb. Till 1 week ago i had tvout connected to my tv and Dsub connected to my analog monitor . All was working right, Clone mode or dual view were working perfectly and i could see films on tv and playing a game on monitor. At the same time.
Then after formatting everything changed.
1° - The dual view mode is no more avaiable
2° - If i try to set the clone mode, it set the new mode, and start the usual 15 sec countdown to revert the setting if anything went wrong but .... it revert to single display mode if i press "yes" or if i press "no" or if i wait the 15 sec timer.
3° - Underd the troubleshooting window the "my connected tv is not being detected" check is disabled .
4° - If i set single display mode on tv, it work but ..... all settings for tvout output like composite or s-video are absent :-/ just empty cascade menu. The video on tv is show correctly ... well just b/w but i know how to solve it.
Before the format i was using nvidia 66.93, and after it i tryed both 66.93 and 61.77. I'm using Wxp pro with sp1a and all security updates. About the virus, don't worry, completely deleted and re-downloaded all drivers.
Reading previous posts i'm going to try the driver cleaner 3 but don't think can solve my problem.
Any hint for this situation is wellcome :D
Edit : I apologize for this useless post because, after posting here, i tryed to install msi 71.22 drivers and they rock !!! :D All work perfectly like heaven.
Sorry again for the useless post. -
So i have an apple tv, iphone, and a mac pro. i know how to figure out to play the video on tv using my phone. but on my laptop it's saying the there's only single display and that i need a second display.
If your Mac is new enough, you can use AirPlay to display your Mac screen via your AppleTV. If you have an older Mac, you can get AirPariot that will provide the functionality.
Depending on your Mac, it should have the ability to connect an external monitor. It will most likely have either a DVI, mini-DVI, or mini-DisplayPort connector. Once you know the kind of graphics port on your Mac, you can get an adaptor and cable that will allow you to connect to an external monitor or digital TV. For example, I use a mini-DisplayPort to HDMI adaptor when I connect to my digital TV. I use a mini-DisplayPort to DVI cable when connecting to an external 24" monitor. -
How to display output only sort format in alv
Hi Experts,
I have one problem in alv output display. I'm developing alv report for orders raised during the period.I want to display each order wise value(netwr) and order quatity (kwmeng) . i set 8 radio buttons one radio btn click then i want output ex.in grid display click on sort then each order wise calculate the value and quantity . that particular data to display when click on radio button.
ex:click on sort in grid display.
(branch) (order no) (quantity) (value) (BSTNK)
AMUM 0000003354 2 10 3,271
AMUM 0000003354 1 10 6,542
(above qty sum 2+1=3)
(SUM) = AMUM 0000003354 3 20 9,813
HIP2 0000003362 2 5 17,810
HIP2 0000003362 1 5 23,075
(sum) = HIP2 0000003362 10 40,885
i display output in alv griddisplay.client asking one rb put in selection screen i want output like above only sum col.
when i click one radio button output is come like (sum) above.
Please help me.
Thanks & Regards,
Balakrishna Gajulahi you need to use sortinfo for your requirement.
ie see the below code.
"declare sortinfo at data declaration
data: wa_sort type slis_sortinfo_alv, "''' add this
layout type slis_layout_alv. "add this
""make the below changes in your fieldcat
wa_fieldcat-tabname = 'FINAL'.
wa_fieldcat-seltext_m = 'Td - Rvdt'.
wa_fieldcat-fieldname = 'QUANTITY'.
wa_fieldcat-do_sum = 'X'. """"""add this to your *QUANTITY field*
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'FINAL'.
wa_fieldcat-seltext_m = 'temp''.
wa_fieldcat-fieldname = 'VALUE'.
wa_fieldcat-do_sum = 'X'. """"""add this to your *VALUE field*
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
""""" you need to add this after workarea of fieldcat
wa_sort-fieldname = 'BRANCH'. " Here Branch indicates the fieldname
wa_sort-subtot = 'X'.
append wa_sort to it_sort.
clear wa_sort.
wa_sort-fieldname = 'ORDERNO'.
append wa_sort to it_sort.
clear wa_sort.
" in your alv fm add sortinfo
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = sy-cprog
is_layout = layout
it_fieldcat = it_fieldcat
it_sort = it_sort """""""""add this
tables
t_outtab = final " your internal table name
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
This solves your purpose.
Regards,
koolspy. -
The software i use to play dj music videos cause for multi disply in which my Macbook pro has a single display funtion. Is the ant way to get multi monitor display added to my computer
If the monitor can be detected your Displays preferences should show it in its Arrangement panel. You may have to play around with your Display panel to get the desired resolution. And also may have to click detect displays and gather windows to see both sets of preferences on your main screen.
-
When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only
If you see a red light in the audio output port, then the internal switch is stuck. Insert the earphone plug a few times and see if you can trip the switch. If that fails, insert a cocktail stirrer and the like and jiggle it around inside. If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
Ciao. -
Turn off external display output?
I've bought a nice big LCD TV mainly for consoles. Because I have it next to my iMac i've also connected that to the TV using a mini-dvi adapter and a dvi-hdmi cable.
It works great but I only want to use it for playing downloaded video and the like on the big tv.
When I'm not using it I want my iMac to free up the resources it must be using to achieve screen spanning but I cannot figure out a way to tell the iMac to disable external display output.
I've tried display mirroring figuring that it won't be eating up video RAM, but it causes page tearing on my mac when dragging windows around for example.
Even when the TV is unplugged from the mains the mac seems to be outputting to the dvi out, the only way to stop it is the yank the mini-dvi connecter from the back.
Are there any hacks or utilities that can manually turn dvi support on and off?Hello Mark
I'm using a 27" flat screen TV, mini DVI and 12' S-Video cable.
Mostly I watch DVD movies on that Display while working at the iMac's 17" it's also great for iPhoto Slideshows and PowerPoint.
Not to worry the TV supports it's own display and all you are doing is sending a signal to it's video card. Just turn it off or change the channel.
I tend to stay away from mirroring for the same reasons, but also because the TV's across the room.
Again not to worry the TV supports it's own display and all you are doing is sending a signal to it's video card. Just leave it connected up to prevent damage to DVI port, Adapter and cable. "yank not"
Just be sure to gather up all your windows back to the iMac Display befor shutting off or changing the channel.
Dennis
17" iMac Intel Core Duo 1.5GB Ram Mac OS X (10.4.9) Maxtor 300GB FireWire Creative Inspire 2.1 2G Nano -
Fields missing in ALV grid display output
Hello Friends,
I have done customer enhancement to VF04 tcode and i have added 2 new additional fields to the existing output.The program is working fine and its displaying the 2 new additional fields in the output display in development server.
But when i transported the program to Q server and i have observed that the 2 new additonal fields are not displayed in the output display but when I am selecting 'choose detail' push button on application tool bar it's showing the 2 new additional fields.In development server in the output 40 fields are displayed but in Q server only 9 fields are displayed.
Could you please help me regarding this.
Thanks in advance,
Arvind.register the enhancementy to the project in Q server .. might be it is not transferred
-
Using Cinema Display and Samsung LCD with One Mini
I have been trying unsuccessful to output the DVI of my mini to my 23" Apple Cinema and my Samsung 4669F (native resolution of 1920x 1080p). I have tried various methods including using the Gefen 1:2 DVI Splitter (Ext-DVI-144) and a DVI-HDMI cable to the samsung in conjunction with SwitchResX, all to no avail.
Any help?- I wish to mirror the same display on both LCD screen simultaneously?- However, I would settle for a solution of a convenient A/B switch? ANy tips?
What about an external USB video card for the Mini- that should work too?- any tips?
I used SwitchResX because I determine that because the 23" ACD was 1920 x1200, the Samsung was not displaying because the Gefen splitter box was sending the same signal in 1920 x1200 to the Samsung, which was not accepted by the Samsung whose native resolution is 1920 x 1080p. However, once I switched the resolution to 1920 x 1080 to force an out of the mini to that resolution, there was no display at all on the 23" ACD and I had to do a safe mode reboot to recover the display on the 23" ACD?-
One would think that it would be relatively easier for Apple to create a script that would allow a person to display 1920 x 1080p on the Cinema Display, a script that overrided the message from the ACD that tells the mac mini to stretch any resolution to 1920x1200 before it gets to the 23" - This way I could use SwitchResX and the Gefen splitter to output 1920x1080p to both displays at once (of course the 23" ACD would have to have some black borders on the top and bottom. Why doesn't apple make this available? - Spent $900 on this monitor and the Mini has a DVI output- why should the Gefen splitter be rendered useless simply because my other display is a different native resolution.
Message was edited by: sidebysidefootballOf course it is!
(I've got this problem for 3 month now) -
[GTX770]No display output HDMI/Displayport when booting
I've recently upgraded to an Haswell setup with a MSI Z97 pc mate and MSI GTX770. The card seems to work fine when I use DVI output. However, when i try to use either hdmi or displayport I only get display output once i'm in windows. The bios and booting process give no output on either connection.
Is there something wrong with the GFX card, is there some bios setting i can try?Quote
Thanks for the quick reply. Will this GOP UEFI bios make Displayport work on boot?
don't know, maybe
Quote
I've never heard of GOP UEFI bios, so I don't have a clue what advantages I get with that.
its related to Win8 features, ultra fast boot and so on if you decide to use such -
Rows to columns/Transpose the records Query and Display output
hi ,
can anyone help me query this and transpose it to this format?
i am still a beginner in sql.
thanks for help!
Rows to columns/Transpose the records Query and Display output
id startdate endate
1111 1/2/2001 11/3/2001
1111 2/5/2002 4/3/2002
1111 2/6/2000 2/5/2001
3333 5/2/2003 11/3/2003
3333 6/2/2003 12/3/2003
3333 2/6/2005 2/5/2005
desired output
id startdate1 endate1 startdate2 endate2 startdate3 endate3
1111 1/2/2001 11/3/2001 2/5/2002 4/3/2002 2/6/2000 2/5/2001
3333 5/2/2003 11/3/2003 6/2/2003 12/3/2003 2/6/2005 2/5/2005Have you only 3 dates for each id ?
So, try :
SQL> l
1 with tbl as
2 (select 1111 as id, to_date('01/02/2001','DD/MM/YYYY') startdate, to_date('11/03/2001','DD/MM/YYYY') enddate from dual union all
3 select 1111 as id, to_date('02/05/2002','DD/MM/YYYY') startdate, to_date('04/03/2002','DD/MM/YYYY') enddate from dual union all
4 select 1111 as id, to_date('02/06/2000','DD/MM/YYYY') startdate, to_date('02/05/2001','DD/MM/YYYY') enddate from dual union all
5 select 3333 as id, to_date('05/02/2003','DD/MM/YYYY') startdate, to_date('11/03/2003','DD/MM/YYYY') enddate from dual union all
6 select 3333 as id, to_date('06/02/2003','DD/MM/YYYY') startdate, to_date('12/03/2003','DD/MM/YYYY') enddate from dual union all
7 select 3333 as id, to_date('02/06/2005','DD/MM/YYYY') startdate, to_date('02/05/2005','DD/MM/YYYY') enddate from dual )
8 select id, max(decode(dr,1,startdate)) start1,
9 max(decode(dr,1,enddate)) end1,
10 max(decode(dr,2,startdate)) start2,
11 max(decode(dr,2,enddate)) end2,
12 max(decode(dr,3,startdate)) start3,
13 max(decode(dr,3,enddate)) end3
14 from (select id, startdate,enddate, dense_rank() over (partition by id order by startdate) dr from tbl)
15* group by id
SQL> /
ID START1 END1 START2 END2 START3 END3
1111 02/06/00 02/05/01 01/02/01 11/03/01 02/05/02 04/03/02
3333 05/02/03 11/03/03 06/02/03 12/03/03 02/06/05 02/05/05
SQL> HTH,
Nicolas. -
A single .swf output file?
I import my captivate simulations into my Authorware
programs. This requires a single .SWF output file. I want to be
able to use the skin (border) feature and produce only 1 single
file. Can this be done? Anyone have a work-around...
Thanks,
kshasmithHi there kshasmith
So you want to eat all that cake and still have some to take
with you, eh?
I think you would be able to accomplish this the old
fashioned way. That is, the way we did it in Captivate 1. Notice
that if you DE-select the borders check box, you STILL end up with
the playback controls. They are just plopped on top of the bottom
of the movie. Sooooo, if you click Project > Resize Project...
you can increase the height of the movie to make room for the
playback controls.
Steps:
Click Project > Resize Project...
DE-select the "Maintain Aspect Ratio" check box
Add 35 pixels or so to the value in the Height field
Choose the option to Keep project the same size and fill the
background with color
Choose the color your skin would have provided
Click the drop-down and position the project in the Top
Center
Click the Finish button
This should result in a single .SWF movie that is basically
identical to a skinned Captivate movie using two .SWFs.
Give that a go and see how you fare.
Cheers... Rick -
How to make an checkbox editable and uneditable within a single alv output.
Hi,
How to make an checkbox editable and uneditable within a single alv output depending on condition.
I have used Reuse_alv_grid_display.
In my output every checkbox is editable. i have used edit = 'X'.
I want editable checkbox for correct value and uneditable checkbox for incorrect value in a single alv>
Mukilansap wrote:
> I want editable checkbox for correct value and uneditable checkbox for incorrect value in a single alv
Use alv styles to achieve this, set the style for each record before displaying the ALV. Structure LVC_S_STYL.
Take a look at the example BCALV_EDIT_02, it is OOPS based, but check how the style table is filled.
regards,
Advait -
2 displays in "Displays" system preference even though only 1 is connected
My computer persistently thinks that there are 2 displays connected: color LCD and VGA display. I only have, and ever had, one display: a 20" cinema display.
I've dumped com.apple.windowserv.* pref lists, restarted the computer and a couple of times, that did the trick.
BUT, the problem has returned!
Any help is appreciated,
Thanks in advance,
ArturHi AD,
not dealt with TRIP object,
but the CHANGED event, is it created by you thru SWEC?
If yes, check if the entry has OnChange and not Create.
Hope it helps.
Aditya
Maybe you are looking for
-
Sales Order + Activity query
Hi, I set up the following query in one company: SELECT T0.DocNum, T1.ClgCode, T3.U_NAME, T2.name, T1.endDate, T1.Priority, T0.CardCode, T0.CardName, T0.NumAtCard, T0.DocDate, T0.DocTotal FROM ORDR T0 LEFT OUTER JOIN OCLG T1 ON T0.DocNum = T1.DocNum
-
I can't install I-Tunes 10.6.1.7 on my Windows Vista laptop. Tried it several times. First message: Policy 8.0 Microsoft VC80.CRT..type='win32-policy, etc. Please help
-
Hi Experts, I am getting the below error in the receiver SOAP communication channel. "Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.Messag
-
Problem with Yahoo IMAP and Mail...
I'm having an issue with my Yahoo IMAP setup and mail on my desktop: I have set up my yahoo email account with IMAP on both my iphone 4 and with mail on macbook pro. It has worked fine, all my folders are synced up on both devices and everything run
-
Hello all, I want to print a graphic element, included in a graphic window, conditionally. Is there a way to print this window only when certain conditions are fulfilled (this will be checked in the print program) or the window will always print, reg