Single Edition DPS Apps Crashing in iOS 8?

Hi Guys,
I've just been told by some readers that as soon as they have updated to iOS 8, past apps I have released - single editions, not multi-folio for iPad - just crash. They either open and crash as soon as you scroll, or crash straight away.
What is going on? Is this an update that needs to happen on Adobe's end and has yet to occur?
Cheers
Chris

Hi Neil,
I think I am having the same problem as the OP. This is the error I got:
----- 2.2 -----
We found that your app exhibited one or more bugs, when reviewed on iPad running iOS 8, on both Wi-Fi and cellular networks, which is not in compliance with the App Store Review Guidelines.
Content does not load. This occurs upon launch.
If I just recreate the app with the "create app" in the folio builder will this correct the problem? Would I need to also change the provisioning profiles or anything or just a straight rebuild will fix this? Are their any updates I need to download first before I rebuild?
If it makes any different it's a single edition app. I know being a CC member would be better. The owner of the app refused to go that route. Dumb, I know.
Any help is appreciated.

Similar Messages

Can't update Single Edition DPS app

Hi,
I have created an app following this process:
Created inDesign file. Added folio overlays.
Added open document as Article in new Folio.
From folio builder panel, clicked on Create App which then opened the DPS App Builder.
Created the App in the DPS App Builder.
Activated the app with a Single Use License.
Now I need to update the app. I don't have the option to update the folio in the DPS App Builder. So I found this http://help.adobe.com/en_US/ppcompdoc/Step_by_step_guide_to_dps_se.pdf which says that I can create a new app and delete the other one, but:
I can't delete the active app
I can't activate a new app because the license is in use
How can I update the app using the Single Use License that we purchased?
Thanks
Rafael

You can use the serial number only once. If you need to update your app, contact Adobe technical support and ask them to reset the serial number.
By the way, if you have a subscription to Adobe Creative Cloud, you can use that account ID to update or build an unlimited number of single edition apps for the iPad. A Creative Cloud license is easier to use, more versatile, and more cost effective than purchasing a single license.

Simulator build needed for Single-edition DPS App

Hi everyone!
We're trying to embed our App into our site with one of those sites that offers that kind of service, but they're asking for a simulator build and won't accept .ipa files or even the distribution .zip for the App store. They do offer a plugin for Xcode that helps you take it over staright from there. Problem is, nothing except the transfer was done from within Xcode, so there's nothing there, obviously.
So, the question is, how do we get a "simulator build?" Presumably, that's what you create in Xcode for iOS simulator..? Is there a smart way of getting this from any of the builds I'll have after creating the App with DPS?
I've asked the company in question for support, but they seem a little busy setting up new offices and getting funding to answer the question or even provide some sort of troubleshooting page on their site. SUPER HELPFUL.
I've searched the DPS forum for something similar, but not found anything. If someone does have a thread link for this type of problme, please do post that, of course. Otherwise, any proverbial sharing of greymatter would be hugely appreciated.
Thanks!

Hello Pete, please take a look at the following document and see if it applies to your case:
http://helpx.adobe.com/digital-publishing-suite/kb/missing-folios-viewer-application-digit al.html
Cheers,
Ercole

What cloud solution includes single edition DPS publishing?

hi,
when you subscribe to Cloud there is an option to choose "SINGLE APP" (instead of the whole cloud which gives access to included all adobe software).
So, if you choose "single app" and INDESIGN as that application, will you be able to publish single edition DPS apps as much as you want???
thanks for clarifying.
best regards, janne

No. You must get a full Creative Cloud subscription to publish Single Edition apps.
Bob

Multiple languages in Single Edition DPS

Hi,
We have just finished a single-folio application for a client in English and are about to publish it to the App Store. But our client has requested that we add 5 languages for the second version of the application, to be published in a month or two.
We've tried looking around for the best way to do this using Single Edition DPS but have not been able to find any documentation about how to do it. We know it's possible to do it using multi-folio applications, but our client doesn't want to publish a multi-folio app.
Has anybody here tried publishing a multi-language app using Single Edition? Any tips or links to documentation about it?
Thank you in advance for any help on this!
Diana

This is not possible with DPS Single Edition, you will have to either create separate apps for each language or you will have to include all languages in one app however that will make your app very large and also will create confusion in navigating. The best option for you would be to create separate apps for each language and publish them regionally.

Can you self-distribute a single edition folio app?

Currently I am using the Adobe Content viewer to distribute folio's for a couple of clients. One client would like single edition folio apps created, but doesn't like the idea of them being in iTunes. Is it possible to self-distribute (publish) a single edition folio app outside of iTunes? Much the same way you can already create any type of iPad app and create an installable package without having to go through iTunes...
Thanks for any assistance,
Greg B

The only way to do so is to create a developer version of the app but it
will expire and will be limited to 100 UDIDs.
In short, this isn't going to happen without enterprise level accounts
with Apple and Adobe and is still subject to licensing restrictions set
forth by Apple for app distribution.
Bob

Every single 3rd party App crashes

Hello,
I'm running a 8gb EDGE 2.0.1 iphone. Every single 3rd party app crashes all of a sudden. I tried restore. all native apple apps load, but even when I just synce 1 3rd party app to the iphone (so all native iphone apps and 1 3rd party) that always crashes to iphone home screen.
I need to fix this because I need to use 3rd party apps like zenbe (which was working perfectly for me a week ago)

ok i had this same problem i called apple the guy i got new exactly what was happening and game me a work around. follow these steps exactly. this is a mac work around only dont know about windows.
1 make sure your phone is not connected to your computer.
2 delete every app directly from iphone by holding a app and then clicking the x
3 go to settings general reset and choose reset all settings
4 now on your computer open itunes on the menu bar go to store and deauthorize your computer
5 quit itunes
6 reopen itunes and reauthorize the computer then exit itunes
7 open isync go to preferences and select reset sync history and exit isync
8 open itunes and connect your iphone. it may freeze itunes for 2-10 minutes but dont exit just
wait it will eventually recognize your iphone.
9 after itunes recognizes your iphone go to the music tab and select a small playlist to sync then got to the app tab and choose sync selected apps and if anything is selected deselect them.
10 if you have remote app select it if not download it for free and select it
11 then select two other apps and click apply
12 it will start to sync. it will say removing apps let it do this. depending on how many apps you have it could take a long time (mine took more than an hour)
13 if you get error 0xE800002E after you are done just repeat steps 1-8 it wont take long this time
14 if you dont get the error check to see if your remote works if it does check the other apps if they dont work repeat steps 1-8 if they do you are done just restart the iphone to make sure the still work
15 if you got the 0xE800002E error and have repeated 1-8 sync remote and two other apps and it should work if it does not try again it worked for me the first time though.
it is a long process but be patient and all will work out.
that is it until apple fixes this stupid issue which should never have gotten passed testing.
hope this helps
if u need help or inform me of how it went u can email me at [email protected]

Is it possible to test a DPS app in the IOS simulator

Does anyone know if it's possible to test a DPS app in the IOS simulator? We're trying to remain accessible to iPad 1 users for as long as possible) and to be able to test IOS 5, 6 and 7, in both retina and non-retina resolutions, will mean I'll need 5 ipads. I've only got two
Cheers,
Keith

Sorry for the delay in replying.
The IOS simulator appears to respect the DPI information for displays, even going as far as to switch the scaling setting for retina-enabled virtual IOS devices when you move the simulator from a high-DPI display to a regular display. As I have both, I'd get a reasonable facsimile.
Unfortunately there's no way to make IPAs run in the simulator -- as I've now discovered, it's not emulating the ARM environment and apps have to be compiled for the simulator to use it for testing.
I'll have to go shopping...

Single Edition Native App for Android

Is it possible to create a native app for android (google play store) with DPS single edition? Or is there another way to achieve it?

Hi,
The app will stay available but the content will disappear as you quit subscription after first month and the content is hosted on the Adobe Servers. You have also download fees in addition.
No chance to bypass it.
If I remember well, Aquafadas are the only ones who are having a single payment option for an Android single issue. But they are changing their marketing strategies frequently, so I'm not sure if it's still available.

Some files in HTMLResources not loading in single edition developer app

Good day again.
I have created a single edition app and it works perfectly when tested in Content Viewer. The moment I install the Developer .ipa the PDF files I loaded in the HTMLResources.zip folder does not load.
Any ideas what I did wrong?
Thanks

Anyone? I installed DPS v32.1 hoping that will solve the problem but still no joy.
The Single Edition app I build works fine on both iOS7 and 8 when viewed in the Content Viewer, but as soon as I download the Developer App the PDF files I embedded in the HTMLResources.zip file does not load?
Please, any help out there?
Stefan

Technical support for single edition DPS

Hi
I'm hoping somebody can help me. I'm trying to find the answer as to why I keep getting the 'folio missing error' when I try to create my app.
I've already submitted it to apple and it's been approved and appears in the app store. However, I have made a couple of text amends and now can't seem to test the new version or download the distribution zip files to re-submit to apple.
I'm quite up against it in terms of client deadline and I was wondering if somebody can maybe try and help... or is there a technical support number I can call to speak to somebody and hopefully resolve my problem?
I've tried the number on the website but I'm uk based and the number appears to be invalid every time I attempt to call.
A few things that may help:
• I'm on the same computer as the original app was built and submitted, however the indesign files (although in exactly the same location) are saved on our server. Could this cause a problem?
• I have used a single edition serial number, so the delete button is greyed out in the DPS app builder app
• All articles are updated and I have tried launching DPS app builder both independently and from the workflow menu in Indesign but keep getting same error message.
I'd be really grateful if somebody could shed some light on the problem. I'm assuming this is a pretty common problem unless I'm doing something wrong / missing something really obvious??
Looking forward to hopefully getting a reply soon.
Many thanks,
Pete

Hello Pete, please take a look at the following document and see if it applies to your case:
http://helpx.adobe.com/digital-publishing-suite/kb/missing-folios-viewer-application-digit al.html
Cheers,
Ercole

Single Edition DPS et Creative Cloud ?

Comment obtenir le niveau Single Edition de DPS avec un abonnement Creative Cloud ?

No. There are requirements for Apple that force some of this into Mac-only. In case it matters, I’m not thrilled about it either since I’m primarily a Windows user but I have a Mac, too, which I use when I have to create an app.
But all of the initial work is done on Windows. You will find the same issues with other systems as well.

Creating single edition CC app by use of WoodWing

Hi,
We are using WoodWing to create our folio's.
We want to publish a folio to a single edition app, using a creative cloud license.
How can we import the folio into the DPS builder app?
Thanks!

That is the only process for creating a Single Edition app with Creative
Cloud. If you have a pro or enterprise account you can export the folio to
zip and created the single edition app that way, I believe.

The Single Edition DPS License is include in CC subscription?

As I told in title, i would like to know if the Single Edition License DPS is already included in CC subscription.
TY.
Enrico.

Yes, DPS Single Edition is included with Creative Cloud Complete Subscription and Creative Cloud for Teams Complete subscription.
Using this you can create unlimited Single Edition Apps for iPad and publish to App store.
Complete refers to a subscription plan which includes all CC products. For more refer to the buying guide: http://www.adobe.com/in/products/creativecloud/buying-guide.html

Single Edition DPS adding articles, FEES?

If I publish a folio with my single edition through the cloud that has 5 articles, can I add 4 more articles to that same folio at a later date? And then add 2 more articles at another date? And if I can, do I just delete that folio and upload the new one? What would the workflow be to do this? and MOST IMPORTANT, what if any fees/costs are involved in doing this.
Would love an answer to this. Thanks everyone

You cannot add articles once your app is approved by Apple but yes can add articles even after publishing folio.There is no need to delete folio and can use same folio.
The workflow of DPS Single edition is different from other editions thus there is difference in publishing process. You can only publish as private and then you will have to export the Zip file from Folio producer which you already did as you wrote. Now that same zip has to be imported in Viewer Builder while building your custom viewer.
You need first use your Serial key to activate the build, then you can download the developer.ipa to test it on your iPad, remember that your Mobile provisioning file should have your iPad’s UDID added to make it work on your iPad. You can only use the serial key one, you would not be able to reset or make changes after you have used the key, thus for basic testing, use Adobe content viewer and use the serial key only on finalized content.
With Single Edition, you do not pay download fees. Download fees apply only to multi-issue apps created by Pro and Enterprise customers. Since the content is embedded inside the App, and Adobe does not host your folio or content. DPS Single Edition is 395$. That all you need to pay. You can also purchase CCM subscription in which you can build unlimited single issue apps.
Single Edition overview: http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f6032817afa1337a03d59b-7f ff.html

Single Edition DPS Apps Crashing in iOS 8?

Similar Messages

Maybe you are looking for