Single Edition Q - Folio update and end user notification

Just after some clarity - after my initial publication, the app being on someones iPad, if I want to update say, an events page within the app (I know a URL link is probably best but not always practical), I understand that I have to resubmit (and pay the single edition fee) the new, updated app to the app store, does the app that has already been downloaded receive an update notification? I mean, does the app receive a red dot to say it has been updated and will the update appear in the app updates list in app store.
Would like to know what the end user actually sees or receeives to let them know the app is updated.
TIA

No. Just saying it would be way easier to create a new app.
I’ve seen funky stuff like this with test apps. Do you have an iPad that hasn’t had this on it that you can test it on?

Similar Messages

Websecurity and End-user-notification with HTTPS proxy

Hi all
I would like to setup HTTPS-proxy functionality in a deployment. Most of the rules are "pass-through" and only a few would then be configured for drop or decryption.
But if i set the connection to drop it is not possible to display an End-user-notification for the endusers. Is there any chance to display an End-user notification to the enduser while dropping or denying https access to a particular group ?
If yes, is the End-user notification then displayed in normal http connection or in a https connection ?
Did i use for that a trusted certificate to correctly display the end-user notification without to pop-up a certificate failure (because self-signed certificate is in place at the moment) ?
It would be great, if you have some answers for some of those questions.

Andrew,
See if the below may be modified to do what you want.
barbee.
Cisco Ironport Advanced Services
     * This function checks for the category and redirects the user.
     * -- 2010 june 16. barbee.
    function checkForRedirect() {
        var category = document.getElementById("category");
        if ( category.value == "Search Engines" ) {
            window.location = 'http://www.ironport.com';
OTHER STUFF

Appraisal - tcode access to core and end users

Hi Experts,
Please let me know which transaction code access is to be given to Super Users, Core Users and End users from the list below.
And also, Please let me know if I have missed out any transaction codes related to Appraisals.
T codes for PMS Basic Setting
OOHAP_BASIC           Basic Appraisal Template Settings
OOHAP_CATEGORY           Appraisal Category Settings
OOHAP_CAT_GROUP     Category Group Settings
OOHAP_SETTINGS_PA    PA: Settings
OOHAP_VALUE_TYPE     Standard Value Lists
T codes for PMS Process
PHAP_ADMIN     Administrator - Appraisal Document
PHAP_CATALOG     Appraisal Template Catalog
PHAP_CHANGE     Change Appraisal Document
PHAP_CREATE     Create Appraisal
PHAP_PREPARE     Prepare Appraisal Documents
PHAP_SEARCH     Evaluate Appraisal Document
This is very urgent..Your immediate response is highly appreciated.
Thanks!

Hi,
End users are authorized with
PHAP_CHANGE Change Appraisal Document
PHAP_CREATE Create Appraisal
PHAP_PREPARE Prepare Appraisal Documents
the T.codes
where they can prepare appraisals, if mistakenly entered wrong appraiser or appraisee they can edit
For other activities administrators must have autorization
Regards
Ratan Puli

Need of SAP Equipment and Tooling Managemt Config and End user documents

Hi
I am in implementation project of SAP PM - ETM (Equipment and Tooling Managemt )
Can any body please send Config and end user documents if any?
I am in urgent need of those documents
Thanks in Advance.
SR

Hello Jackie,
The new features are outlined in the Installation Guide (page 10.)
The most noticable to the end-users would be the security settings and the different views such as Hierarchial and Tree views
which can be customised.
Best Regards,
Jude Bradley

Administrator and End user Permission

Hello Everybody,
How Administrator permission is different from End user permission, i cannot see any major changes if i assign or revoke those.
2. If i have assigned role assigner permission to a user who does not User administrator or any other administrator rights, how he is able to assign role to other user.
I have read on help.sap.com, but unable to understand.
regards
Santosh

Hi Santhosh,
1. The Name itself tells us the Difference .
 "Administrator" ->
 There r 3 types of Admn here
 a) "Content Admn" ( he is the one Who can create Iview / Role ..)
 b) "User Admn" ( he is the one who can Create Users and Assign Roles to the Users)
 c) "System Admn" ( he can change the System Properties ..Like Layout ,sys alias etc )
and End User is the one who doesn't have any of the Admn Roles . A default user may contain Only EU_ROLE
2.
 If u r a developer u must have Content Admn
 and for the basis guys must have User Admn and Sys admn.
Hope it helps .
Regds,
J

End-user notification is not working for one of the untagorized HTTPS webistes on IronPort WSA

When users try to access the URL https://cloud.skytap.com/tools/connectivity they are getting 'Internet Explorer cannot display the webpage' instead of regular IronPort WSA end-user-notification. This URL is currently uncategorized. Please advice.

Yes, we have set drop all the uncategorized URLs. We do get end-user-notifications for HTTP websites which are uncategorized.
However, if any of the HTTPS websites which are uncategorized, then we wont get end-user-notification.

HELP! Converting fonts for preflight and end user review

I want to make sure the fonts are either embedded or linked to the doc so the end user can review my file. Once it is ready for print, what are the steps to make it print friendly?

If the client needs to edit the file, you need to send the original InDesign file. You can use the Package command in the file menu to gather all of the fonts (other than CJK or restricted fonts -- you'll see the warning) and images required for printing into folders along with the document. This does not alter the licensing requirements, though, that the other user must have their own license for each of those fonts to install them (which is why PDF is a much better solution in General as most fonts worth using allow embedding for viewing and printing in a PDF), as well as a copy of InDesign.
Peter

Customization and End user Prt for Consignment Porcess

Hi,
I want to implement consignment process in our system developemnt server first can u give the detail steps of customization part as well as end user part to implemnt the consignment process with Invocie settlement detail and also material master.
regards,
zafar

Hi
Cretae a consignement info record
then create a PO with Item category K
Do the GR-101K, it will update in vendor consignement stock
then 411 k will take the same to company unrestricted stock
MRKO for settlement
IN SPRO>Materials Management>General Settings for Materials Management>Activate Consignment Prices via Info Records
Regards
Amuthan M

End user notifications not appearing for Software updates

I'm pushing out security updates to Windows 7 clients. The updates are deploying correctly but some users say they are not seeing any notification that the updates are available or that they are installing - It's set up in the deployment to notify. They
say the first time they know about them is when the machine reboots. On my own machine I always get the notifications, on all the IT users near me we always get the notifications, and on all the test machines I've built I see the notifications. It's possible
my users are just not registering the message before it fades away.
I've made some changes to the Computer Agent, Greater than 24 hours - remind every 3 hours, less than 24 remind every 2 and less than 1 remind every 5 minutes so that may help. What I'm wondering though is there a local log on the client end anywhere that
updates every time a notification appears - I could at least verify it - or is there a local reason why the balloon doesn't show. It's not turned of in a GPO.
Is there any way that the balloon can be replaced with a pop up that the user would have to click OK to clear?

Thanks for the reply - I had a look at the logs - here's an example
Adding Open Software Center Menu for Icon Microsoft.SoftwareCenter.Client.Notification.NotifyObjectComplete, because no required item and no reboot are present.    (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectComplete at get_VisibleMenuItems)
SCClient   05/11/2014 12:15:55   1 (0x0001)
Setting the current app data    (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at HandleNotificationEvent)   SCClient   05/11/2014 12:15:55   1 (0x0001)
Verbosity set to low, don't show balloon    (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at HandleNotificationEvent)   SCClient   05/11/2014 12:15:55   1 (0x0001)
The current visible object is of type Microsoft.SoftwareCenter.Client.Notification.NotifyObjectInstalling with priority Installing    (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at HandleCurrentNotifyObject)   SCClient
05/11/2014 12:15:55   1 (0x0001)
This object is of type Microsoft.SoftwareCenter.Client.Notification.NotifyObjectComplete with priority Completed    (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at HandleCurrentNotifyObject)   SCClient
05/11/2014 12:15:55   1 (0x0001)
Removing monitored notification object Microsoft.SoftwareCenter.Client.Notification.NotifyObjectInstalling for app Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2972100)
(Microsoft.SoftwareCenter.Client.Notification.MonitoredNotifyObjectsCollection at RemoveObject)   SCClient   05/11/2014 12:15:55   1 (0x0001)
Number of total seconds in countdown is 5400; starting value is 4; seconds til restart is 5396, system will restart at 13:45:54 (utc end time = 13:45:55)    (Microsoft.SoftwareCenter.Client.Pages.RestartCountdownDialog at .ctor)
SCClient   05/11/2014 12:15:58   1 (0x0001)
User will be alerted (and hide/close disabled) at 13:15:54    (Microsoft.SoftwareCenter.Client.Pages.RestartCountdownDialog at .ctor)   SCClient   05/11/2014 12:15:58   1 (0x0001)
ShowBalloonTip: determining if tooltip should be shown for notification type = Microsoft.SoftwareCenter.Client.Notification.NotifyObjectRestartCountdown    (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at ShowBalloonTip)
SCClient   05/11/2014 12:15:58   1 (0x0001)
Notification is for a logoff/restart required or logoff/restart countdown.    (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at ShowBalloonTip)   SCClient   05/11/2014 12:15:58
1 (0x0001)
Attempting to display the notification balloon with title 'Restart Required' and tooltip 'Recently installed software requires your computer to restart in 90 minutes to complete the installation. No additional software can be installed until your computer has
restarted. '.    (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at ShowBalloonTip)   SCClient   05/11/2014 12:15:58   1 (0x0001)
The operating system version is 6.1.7601.65536    (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at ShowBalloonTip)   SCClient   05/11/2014 12:15:58   1 (0x0001)
This is Windows 7 or earlier, showing notification balloon    (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at ShowBalloonTip)   SCClient   05/11/2014 12:15:58   1 (0x0001)
NamedTimer: Starting timer timeToAvoidDisplayingTheSameBalloon, interval = 120000, period = -1    (Microsoft.SoftwareCenter.Client.Common.NamedTimer at .ctor)   SCClient   05/11/2014 12:15:58   1
(0x0001)
NamedTimer: timeToAvoidDisplayingTheSameBalloon initial interval = 120 seconds, subsequent period = 0 seconds, overall due at 05/11/2014 12:17:58    (Microsoft.SoftwareCenter.Client.Common.NamedTimer at SetTimerInternals)   SCClient
05/11/2014 12:15:58   1 (0x0001)
Would that imply that it's set not to show the balloon - except on the reboot?
I had a look at the following policies using wbemtest
DisplayNewProgramNotification
CCM_SoftwareDistributionClientConfig/DisplayNewProgramNotification
CCM_ClientAgentConfig/DisplayNewProgramNotification
and both are correct - DisplayNewProgramNotification set to true

ABAP Development and "End User License"

Hi all,
I'm happy to join to SDN!!!
I newbe in the forum, and therefore I don't know if I post in the right section.
I'm a Netweaver Architect and ABAP Developer.
In the past I worked as java developer, and with other programming languages.
I have a doubt: is it possible (or forbidden by SAP AG??) to develop an ABAP package (which, obiousvly, contains Z / Y Abap objects) and apply an "End User License" on it, i.e. on the ABAP code written? (I mean that the copryrights are mine, and I give an "End User License" to my customers (that buy the license), in order to get and run my abap code). I would avoid to sell my Abap package, but, if possibile, I would only give it according a "Use License".
May I do this thing without any problems, or have I to consider other aspects, like ask to SAP to reserve a namespace, or obtain SAP Netweaver certification for my ABAP solution, or other things?
(Infact the "End User License" that I mean is different from "SAP End User License")
Please, let me know your opinion and how or who could solve my matter.
Many thanks to all.
Best Regards,
Albert

Hello,
Can you point us there in this thread please?
Kind regards
Ash Thomas
Sap Consultant
<a href=http://www.ashpeople.com>Sap Consultancy</a>
<a href=http://www.ashpeople.com>www.ashpeople.com</a>

ABAP application and "End User License"

Hi all,
I'm happy to join to SDN!!!
I newbe in the forum, and therefore I don't know if I post in the right section.
I'm a Netweaver Architect and ABAP Developer.
In the past I worked as java developer, and with other programming languages.
I have a doubt: is it possible (or forbidden by SAP AG??) to develop an ABAP package (Z / Y Abap objects) and apply an "End User License" on it? (I mean that the copryrights are mine, and I give an "End User License" to my customers (that buy the license), in order to get and run my abap code). I would avoid to sell my Abap package, but, if possibile, I would only give it according a "Use License".
May I do this thing without any problems, or have I to consider other aspects, like ask to SAP to reserve a namespace, or obtain SAP Netweaver certification for my ABAP solution, or other things?
(Infact the "End User License" that I mean is different from "SAP End User License")
Please, let me know your opinion and how or who could solve my matter.
Many thanks to all.
Best Regards,
Albert

Hi Albert,
I thing you are doing some mistaken, please read carefully SAP licence agreement or send query to SAP they will reply accordingly.
Regards,
Anil

Set up end user notification for updates/comments

Hi,
SCSM 2012 R2
I've set up a workflow to notify end users when an incident has been created. Users can submit cases by mail, get a receipt, and can reply to the incident.
Now, i'd like to set up a workflow to notify end users when a comment has been made in their incident aswell.
How can i do this?

Hi,
That would do the job, however i have not found a way to enter the affected users name in the mail template when using "Trouble Ticket Analyst Comments".
Btw, installed the Cireson notify free app. I can see no info on the cireson site about how to use it. Checked the incident workflows, nothing new there. Checked the notifications templates, nothing new there. Checked the forms templates, nothing new there.
Spendt about 40 mins googl'ing the subject and found no info.

Devloper app (.ipa) created to test, but I can't transfer Single edition app to updated version

Hi
I went through the process of creating the developer and distribution app. I wanted to test the distribution app before I upload to the store. You need to use a "Built-in Single Edition App" licence from Adobe to create the developer and distribution app.
Once tested we found a minor mistake. But once I rebuilt the app to create another developer file to test I found I could not use the same SIngle Edition App serial number, or transfer it, or even delete the original file and try again.
It seems a bit harsh that the process allows you to create a test file, but if you use single edition you can't change anything at that point any way.
Is there any way around this?
Regards

See http://forums.adobe.com/thread/1327845, and send a private message to Lohrii Alo. He can assist.
Neil

Basic Informatio and End User Document

Dear All,
I am very new to SRM. I would request you all to provide me some information and also if possible End User Document ( where the person would be accessing it from Front End). Thank you in advance...
Regards,
Swaroop

Hi Swaroop,
Please follow the link mentioned below.
It contains very good info on SRM and it gives some screen shot of transactions as well.
http://www.ies.state.pa.us/srm/cwp/view.asp?a=3&q=197102&srmNav=|
regards,nishant
pleasw reward suitably..

Windows 8.1 Pro Workstations - Not Getting "Install Updates and Shut Down" notification for new updates

We've got a small handful of Windows 8.1 Pro workstations on our domain (SBS 2008).
The workstations show up in the WSUS Console list along with the details of how many updates need to be installed.
On the Windows 8.1 Pro workstations, at the logon screen they display "Important Updates Are Available. Go to PC Settings to install them". If we go to PC Settings or Windows Updates via Control Panel the updates show as awaiting installation.
However, we can't rely on users to go into PC Settings or Control Panel to install Windows Updates. We need them to be installed as per Windows 7 and Windows XP - whereby when the user shuts down their workstations it displays the message "Install Updates
and Shutdown".
Currently the Windows 8.1 Pro workstations do not show this - if you choose to shut down there are no update installation messages and the workstations simply shut down.
Has anyone else encountered this? What needs to be done?
Thanks in advance.
I don't work for Microsoft - I just use their products.

It does sound weird yes.
Id like to try and mirror your setup in my lab.
What settings do you have in your WSUS GPO?
Have you seen this, in the 'Configure Automatic Updates' setting?
On Windows 8 and later, you can set updates to install during automatic maintenance instead of a specific schedule. Automatic maintenance will install updates when the computer is not in use, and avoid doing so when the computer
is running on battery power. If automatic maintenance is unable to install updates for 2 days, Windows Update will install updates right away. Users will then be notified about an upcoming restart, and that restart will only take place if there is no potential
for accidental data loss.
Automatic maintenance can be further configured by using Group Policy settings here: Computer Configuration->Administrative Templates->Windows Components->Maintenance Scheduler
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Single Edition Q - Folio update and end user notification

Similar Messages

Maybe you are looking for