Single Edition :single question

Hello Adobe
I've got a simple and single question
- when you get a Single Edition and pay the US 395 fee and then get your folio available fopr iPad, do you get charged for the downloads (the 0.30)
same question even clearer
- for a Single Edition: do you pay US 395 and "that's it and there's no later charge or tax or anything and will this only cost US 395 forever ?"
Sorry but the more I read about all this, the more I'm lost
Thank you for your help

Have some patience.
Single edition apps are one offs. You pay the $395 and then submit the app to Apple.
You pay nothing more to Adobe.
Bob

Similar Messages

HT4623 Hello - I have a single question. Anyone who how to undo an update ? The update to iOS 7... was a failure. Is it at all possible to undo an update?

Hello - I have a single question. Anyone who how to undo an update ? The update to iOS 7... was a failure. Is it at all possible to undo an update?

It is possible to RE-do one but not UN-do unless you consider both to be the same. But you can not downgrade to an earlier version.

Hi, after submission of the form, can the respondents make changes to their answers and submit the form again without completing every single question?

Hi there,
After submission of the form, can the respondents make changes to their answers and submit the form again without completing every single question?
Thanks for your help
Paline

Hi Paline,
Unfortunately this cannot be done.However, being the author of the form you can make the required changes in the response file.
Thanks,
Vikrantt Singh

How to edit the question that I have asked here

hello I have asked a question in this webstart forum , that has a sensitive information so I got to chage it immediately ...
I didn't knew it before I ask, that these questions are visible in google, because now my manager found that question in google search with my project name
I got to remove those words from that questions
can any one please help me how to do it ?
I didnot find any thing that can help me to edit a question that I have asked in the past... but it is very important and urgent please help me
thank you ...

Thanks a lot for your help
ya I have observed that google catche is having it for many days and I have contacted google too to remove the catche
and here in java forums I have contacted Sun and they have deleted that question
so thanks a lot and have nice time over ther
all the best
babaiii

HT1918 How to edit secury questions.. Coz i forgrot my answers to my previous questions. Now cant purchase any app.

How to edit secury questions.. Coz i forgrot my answers to my previous questions. Now cant purchase any app.

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
      Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
      like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
      tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
      "done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
      Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
      should be asked to verify your security code for the credit /debit card and NOT the
      security questions.
d. At this time you can remove the card by going back in to edit the payment info and
      selecting "none" as the card type then saving the changes by selecting "done". You
      should now be able to use your iTunes store credit without answering the security
      questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

Single Edition App question regarding using the activation number

Hello,
I am producing a single edition app for a client. We have purchased a single edition package and I have the serial number. I have created the app and done all the certificates and provisioning stuff...
My question is now that it is built and I would like to download a version for testing purposes it is asking me for the serial number to activate it.
After I enter the serial number will I be able to go back and make changes to it as needed before I publish? Or how does this work? I just want to make sure I dont activate this and am then stuck with the results if changes need to be made. I'm sure the answer is fairly obvious but just wanted to check with people who have had past experiences. Any and all help is greatly appreciated.
Thanks!

Yes, you should be able to make changes, but I can’t let this pass without reminding you that you could have gotten unlimited apps for year and every Creative Cloud application and service for less than you paid for that one app.

Single Edition Distribution Question

I am a member of the CS6 Cloud and a user of Adobe Digital Publishing Suite Single Edition.
I have created a sales tool apps for a client. How do I distribute this to my client? I don't want to sell the app through the Apple Store, only
distribute it for a small group of three to use on their iPads.

If you want to distribute you're app to a small group then you need an Enterprise account you can't do that with Single Edition, with Single Edition you're app is put on the App Store for everyone to see and download. Another way you can do this, is if you have an iOS Developer account and add the Device UDID numbers from each of the ipads and create the mobile provisioning files to include these devices then you can have you're users install the developer-viewer.ipa that you download from App Builder, hope this helps.

Single Edition: Preview question

Hello
On this link that compares editions
http://www.adobe.com/products/digital-publishing-suite-family/buying-guide.html
the "Preview interactive content on desktop and iPhone, iPad, iPod Touch, Kindle Fire and other Android devices" box is not ticked for the Single Edition.
Is that really it ???i
EDIT: of course, as SIngle Editions only work on iPad, sorry ...

Single edition is iPad only. The Adobe Content Viewer works fine for this.
Bob

Yet Another Expressing anger and dissatisfaction over the Cyan situation. How can you ignore so many and not answer a single question about this?

When I bought my Icon it was advertised as being "8.1 ready." Soon, I was led to believe, I would have Cortana. I was told that there were improvements to the camera that were in the Cyan firmware. As this phone had high spec hardware and was being called the Windows "flagship phone" on Verizon, I had no reason to doubt the update would arrive.
Not only did it not, as we are all aware, but as months went by and people took to this forum, other Windows forums and Twitter to complain and question, Verizon has never put out a simple clear statement to their customers about what their intentions are and when they might take action. I feel deceived and ignored.
To not address this in any way when so many are so vocally asking is rude. Quite simply rude.
Even today the Icon is available online at the Microsoft store and the copy there says that this phone is "Windows Phone 8.1 ready" with an asterisk that leads to the disclaimer that "update availability and timing varies by carrier." It has been four months since this update began rolling out.
What has led me to post this and lend my voice to the chorus is the articles published in the last day or two saying that Verizon has now changed the status of the update to "under development." Once again, without a single word of explanation or apology. Without a single message to all of their customers who have been asking for information for months. Again, just rude.
These articles suggest the reason for the delay is Verizon's dissatisfaction with how their apps are working with 8.1. Of course there is no way for me to know if this is true since Verizon will not say anything at all about it. So I might as well believe what the reports say I guess. This of course makes the whole thing so much worse.
Verizon, are you seriously holding up this thing that all of your customers want so as to make sure the horrible bloatware that no one wants will "work"?! You can't put out the update and then fix your terrible apps yourself like every other app maker? Only so that we can then uninstall them anyway? This is ridiculous and insulting.
Verizon is always trying to disable phone features to customer's detriment and their profit. I don't doubt that is what this delay is about. Now it is difficult to tether my phone without paying an extra fee even though the feature is built into Windows Phone. Just a way to keep me from using the data that I payed for and that is allotted to me. In the old days you couldn't move pictures off of your phone through the usb cable you had. You had to send them over the network and use data.
Why not try providing services instead of taking them away and delaying them? Why not treat customers well instead of ignoring their questions? Why not do what is right and allow Microsoft to update their hardware, hardware that we bought after being told that it was 8.1 ready?

Hi Danny-CoolKID,
AIM for Mac is not at version 5.9
It is here http://www.aim.com/getaim/mac/latestmacosx.adp?aolp=0
It is still at version 4.7 and the pages style has not been changed along with the other AIM pages.
It does NOT do Audio or Video Chats.
If you are looking at text only then also consider
1) Proteus (Site being revamped at present)
2) AdiumX
Both these are third party software that can connect to multiple services.
As iVmichael says there are other crossplatform solutions as well.
YakforFree
Paltalk
9:22 PM Tuesday; June 13, 2006

Single question slide issue in captivate 6

Hi,
I am new to captivate 6. I need to achive following functionality:
1. Single check point question slide without result page which will be MCQ or any type of question.
Consider the sinario for MCQ question
2. If user doesnot select any option, he should be informed about the same (which is happening at my end but not more than 1 time even after the attempt count is infinite)
3. There should be next button in disable state
4. if user selects wrong answer and click submit, he should get wrong feedback without the whole screen patch. He will click on retry button to close the feedback and reset the question
5. if user click on right answer and click submit, he will get right feedback and next button will get enabled
6. This Question should reset everytime you visit the page.
Let me know if this is possible in captivate 6?
Thanks,
Omkar

Try clearing your browser cache. You may not be seeing the current content.

How do you play a single question slide?

I am working on a multiple choice question slide, and I want to play it, and it only, to test it out. I have the options : play slide, project, next fives slides, from this slide. When I select "play slide", Captivate somehow forgets the slide is interactive, and "plays" the slide without waiting for me to answer the question or interact with it. How can I get the slide to act as if it were being played as part of the whole object ?
Ryan

Hi there
Expounding on what was said here.
You did note that there are four types of preview.
Play this slide
Next X Slides
Project
In Web Browser
When Play this slide is used, it is really only intended to check timing of objects to see if they are appearing and disappearing at the proper times. As you have noted it's not interactive.
If you really want to play just the one slide, I would edit the preferences and configure the number of slides from 5 to 1 for the preview. Then use the "Next 1 Slides" option. (It will change depending on the number you opted to use.)
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

I lost all my data after upgrading to iOS5.1. It did not ask me even one single question to delete or sync anything

I tried to restore it but it gave me nothing but empty iPad. I don't use any other 'i' things. I upgrade and install my new computer and update iTunes.
It did not ask me anything about my connecting and I ask for updateing old software. Everything is gone TOO smoth and yes clean iPad.
I tried to find the answer in Internet but it did not fit my case. And they are lucky to have back up or other product from Apple to resync.
I guess this will be the last one. I also have Samsung Andriod and I like it very much even it costs me very little, quick, shape, not confusing, type it easily, not gugu.
SO NEXT ONE, I WILL BUY TABLET FROM SAMSUNG.

I thought it is a intuitive idea to back up. But another problem I heard it before is someone lost the data when he synced his new iTune with the iPad with full data. And it synced iPad empty. I could happen.
True I should back up, which I did not lost my data much except my notes in iPad.
My complain is to say normal sensible OS will not do this. My Samsung did not have fansy iTune which I have to be careful too much. I just keep/remove things without warrying stupid sync.
As you all seem has experience how to use iTune, but I don't. I cannot use it simple.

Arctic Silver Ceramique and Volcano 11 + Xaser Edition heatsink questions

Hi - I appreciate your help on my other threads concerning my motherboard K7N2 Delta 2 - LSR and my PS/2 keyboard problems.
Arctic Silver Ceramique and the Arctic Silver cleaning solutions should be arriving in a couple of days. I got the replacement K7N2 Delta 2 - LSR motherboard a few days ago. It looks great, but looks are not everything.
The seller also included a Thermaltake VOLCANO 11 + Xaser Edition heatsink. It's massive.
Here's some info:
http://www.thermaltakeusa.com/coolers/volcano/rs/a1607.htm
Question 1 - Should I bother to install the sensor under the CPU (AMD Athlon XP 3200+ (Barton Core)? It seems like it could cause trouble.
The heatsink also has a dial to control the fan speed. It is mounted on the back of the case. That's easy to install.
Now to the Arctic Silver Ceramique:
http://www.arcticsilver.com/ceramique.htm
Previously, I've used the thermal pads or Arctic Silver 5. When using Arctic Silver 5, I've always spread it over the full surface of the CPU.
The Ceramique instructions say it should be applied like this:
This gives me the jitters. (I have the 32 bit Athlon on the left.)
Question 2: Is this how you personally apply Ceramique?
Question 3: Will it be OK to spread it like Arctic Silver 5?
Thanks
Joe

I go with Wonkanoby.
If you don't put on too much you can use a single drop, and then have the pressure of the seating spreading the paste. Your "old" method is usually better.
The fan may be temp. controlled. If BIOS doesn't pick up the temp. and fan speed and can control it you should add the sensor. I don't know if BIOS will, so if you are worried about noise and such you better check the Internet for someone with personal experience of Volcano.
A bit off: Thermaltake has never ever made good heatsinks, so your dealer must be very relieved now. Spire makes the best for motherboards that don't have the holes around the processor socket.

Issues with WMV HD Editing & Newbie Questions

Hi,
I am new to PE7, so apologies if some of these have been asked b4, I searched but couldn't come up with direct solutions.
I mainly edit HD WMVs, raw HD videos and MPEGs, to be used on PCs and on the internet. Most used output would be HD 1280x720(wmv).
I am having problems with HD WMVs in PE7, they don't seem to play smoothly for editing, clipping etc(choppy and jumpy are the words that come to mind). At first, I thought this was a memory issue( I have 3 gigs on a Vista computer with a Dual Core processor), but then decided to try editing a couple of HD MPEGs (same size) and these played smoothly, allowing be to make precise splits etc.
What would be the best setting for editing WMV HD files(as I said, mainly 1280x720 input and output)? I tried the HD and AVCHD settings(when starting the new project), no joy. Is there some way to tweak PE7, or adjust the settings when editing WMVs, or in general, is it best to import MPEGs?
Next question - I am going to be doing quite a lot of editing over the next few months. Do people find Vista or XP more stable to use with PE7 and Premiere Pro and how much memory would be best for optimal perfomance? If I have to get an XP PC for editing, then that's what I'll have to do. Right now, I'm trying out PE7 and I'm sure I'll have to upgrade to Premiere Pro in a few months, so please bear that in mind.
Any other suggestions, tips and useful links, greatly appreciated.
Thanks

PE7 handles HDV MPEG2 natively... so if you look at a clip on the timeline it will have no line above it, if you look at a HD WMV file on the timeline it will have a red line above it. For the HD WMV file to play back smoothly on your computer (depending on how "beefy" your computer is) you will have to hit the Enter key on your keyboard to render the clip. After rendering the clip will play back smoothly and have a green line above it.
If you are editing 1280x720 HD WMV you could use the HDV 720 30p project preset... however whatever project preset you use you will always have the same need to render the clip.
PE7 and PPro works well with either WinXP or Vista. For editing high definition video I would go with 4G RAM (well your computer will only be able to access 3.2G+ of the RAM). More important is the processor, especially if you venture into editing AVCHD. A fast Quad core is ideal.

10gr2 standard edition standby question - archive log shipping

Hello,
I have 2 servers with 10gr2 standard edition, one is production(primary) and secondary is standby on windows platform. To keep standby synchronized i use a script to copy archived logs from primary to standby and applying manually (with scripts).
My question is: can i use redo transport service in order to copy archivelogs from primary to standby ?
Thank you in advance.

Hi,
It is a bit of topic.
According to the Licensing Document page 10 DataGuard is not supported for standard edition.
http://download.oracle.com/docs/cd/B28359_01/license.111/b28287.pdfRegards,
Tycho

Single Edition :single question

Similar Messages

Maybe you are looking for