Single field display on external crt monitor

I can't find the setting to display a paused frame as deinterlaced on my external monitor. (My client is put off by the 'shimmering' of the two field display when paused). Is there a setting that will change this?
Many thanks

You must apply the Deinterlace filter to the freeze frames: Filters > Video > Deinterlace.
Hope it helps!
Alberto

Similar Messages

New dual mac pro using fcp studio doesn't see external crt monitor

I recently invested in a system to re-edit film and set up my system...dual editing up is fine I put my larger dell monitor through the 3870 which is in bay one and the browser comes up on the 2nd monitor connected to the 2600 in bay 2.
The problem is I can't get my EXTERNAL VIDEO out go to the crt monitor...this is connected by svideo that's on the 3870 which my primary monitor is connected to. Under "video playback" there's no option to choose "apple firewire" the only thing on that menu is the "digital cinema desktop preview" and only those choices, the same under my audio/video settings under the "final cut pro" menu. Theres no option I see on here either for mirroring under the playback menu either am I looking in the wrong place?
This appears to be a software issue as I'm not seeing the other options under video playback to even recognize the dv connection to my primary monitor...I've seen commentary in other logs to try deleting preferences but which ones?
The crt monitor is seen under my apple hardware, I can move things in and out of it...only in final cut pro I can't get external monitor on it...and when I choose this cinema choice the picture comes up on my main monitor but only as a still it doesn't seem to allow me to choose "all frames" in any case.
My main concern right now is to get this external monitor to be read by final cut PLEASE HELP thanks!

Got the "apple firewire ntsc" choice to show up even if grayed out and "missing" under "audio/visual" menus by recreating choices in Easy Setup under "final cut pro" MENU thank GOODNESS because I was reading horror stories on here about this under another thread with someone trashing preferences, reinstalling and the works and still not getting it to show up...on my search now for an analog/digital converter up at b&h...find it odd that the s video connector wouldn't show the crt monitor when I put both displays through the 3870...I switched it back to see if it worked again when only the one dell monitor display was there and there it is again mirroring the screen display on my desktop...just can't be seen as an "external monitor" in fcp...couldn't find anything specific in the shane ross threads to this. I'm sad the program doesn't just see the s video connection though the 3870 though my computer does fine and will query up at b&h in regard to what might be affordable as far as a digital/analog converter. It's also weird in itself that when I put the two dell monitors on the one card my computer no longer could see the s video crt connection...makes no sense. Will report in later as to what I discover up at b&h as I'm sure there's a world of people out there using this sony crt monitor still even into the upgrades with computers and software so I imagine therein lies the solution. Thanks again and I'll report in as to what hardware might be suggested for me.

Jaguar refuses to display on external VGA monitor

Hi,
I have a PowerBook G3 that I would like to set up for printing. I installed OS 9 on it and it displays just fine on my external VGA monitor. I also tried installing OS 10.1 on it which seems to work fine but when I try to install OS 10.2 the monitor goes off after the disk loads up (after the Apple logo goes away). It will not display on my monitor and I cannot use the built in display since it's broken. What's wrong?
Thanks

Apple Rules,
Did you make sure to download the firmware update (if you PowerBook G3 is a firewire model) before upgrading.
List of available firmware updates
What type of disk is the 10.2 Jaguar disk that you are trying to use to install? Is it a machine specific disk or a full retail install disk?
littleshoulders

Single Frame Displays on External Monitor

I have been searching online for the past three hours, trying to find a solution to this. I have found threads describing similar problems, however, I have done everything suggested in those threads, and nothing seems to work. I am at my wit's end.
The problem: When I attempt to play my sequence in my timeline, while connected to an external monitor, then audio plays, but only a single frame shows on the monitor. It updates to the most current frame whenever playback stops, but it only shows a static image. Meanwhile, the canvas window in Final Cut Pro displays nothing.
Things I Have Tried:
I have selected "All Frames" under View > External Video.
I have Refreshed A/V Devices.
I have made certain that the Canvas display size is small. Currently, it is at 50%, and I have also tried setting it to Fit To Window.
I have gone to Easy Setup, and selected NTSC, DV-NTSC.
I have checked "Mirror On Desktop" under Audio/Video Settings > A/V Devices > Playback Devices.
I have also tried unchecking "Mirror on Desktop."
I have set Video Playback to Apple Firewire NTSC (720 x 480).
I have set the Sequence Preset to DV NTSC 48 Khz.
I have set the Device Control Preset to Firewire NTSC.
I have exited Final Cut Pro, made sure the deck was on first, then turned on Final Cut Pro.
I have restarted the computer.
Further Notes: I've noticed that the problem might have something to do with how sequences are displayed. If I double-click on one of my video files in the Final Cut Browser, and open it in the Viewer window, it plays fine, even displays fine in the external monitor (my deck). Furthermore, if I open different Final Cut Projects that worked fine previously, they now have the same issue. So I would assume it is not a problem with the sequence in this current project I am working on.
Any help you could give would be appreciated more than I can express.

Have you set the sequence you're trying to play to DV-NTSC? It sounds to me like you're trying to play a sequence that is not a stock DV sequence through a DV device.
Try creating a new DV-NTSC sequence, copying all the clips from your current sequence, and pasting them into the new sequence.

PowerBook G4 17-inch with external CRT monitor?

I'm looking at purchasing a CRT display to use with my PB 17-inch 1.33 GHz. I'm a photographer and need a display for critical image color correction. Does the PB support CRT displays? Is there a size limitation of the CT display. Any recommendations?
17-inch 1.33 GHz w/ 2 GB RAM Mac OS X (10.4)
17 Mac OS X (10.4)

No problem with it, get the best display you can. I think the only limitation may be resolution if you get a really large display, but most that is only a bad thing with an lcd as it has to "clump" pixels together to create a non native resolution. Just check the specs for your PB and get something that is comfortable with the resolution.
Cheers

External CRT Monitor with Color - Can't find an answer

Hi.. Is the AJA IO LA or LD compatible with Color and an external Monitor. I have both, but under the video preview selection (or whatever its calles) only Disabled is the option. All other options are greyed. These units work with FCP. But cant find a way in Color. Am I missing something here?
Thanks

Matrox just added Color support to the MXO. You can download the MXO 2.1 beta via their MXO forum. It's only the first release but it's very promising.
http://forum.matrox.com/mxo/

Ghosting with External CRT Monitor. Any Solution Yet?

a number of months ago i saw a LONG thread that, as far as i read, never really solved this issue. I was wondering if a solution was ever found.
thanks, seth

more tests reveal a very perplexing conclusion:
my PB works with:
1. NEC (model #: ??? - looks very similar to LaCie electron blue), with built-in vga cable and apple adapter
2. NEC Accusync 120, with removable vga cable (using both this NEC's supplied vga cable AND my LaCie's supplied vga cable) and apple adapter.
LaCie Monitor works with 2 different PC laptops connecting via vga cable. No adapter needed.
I have observed that the problem is
1. not with my computer, since it works with 2 other monitors.
2. not with the LaCie Monitor nor the LaCie-supplied vga cable since it works with 2 different PC laptops
3. not with the vga cable/apple adapter combination because it works with PB attached to NEC Accusync 120
Which leads to the conclusion that this Macintosh PowerBook 15" Aluminum DOES NOT WORK with this LaCie Electron Blue 19
Can someone explain?

APPLESTUDIO DISPLAY 17"(ADC/CRT) - possible to add external power?

Hi there,
is it possible to add some external power to this monitor(12v)?
APPLESTUDIO DISPLAY 17"(ADC/CRT) :
http://www.everymac.com/monitors/apple/studiocinema/specs/apple_studio_display_17cl.html
Are there any technical schematics to download?
In theory one should find the power cables that is normally integrated in the ADC cable?
Many thanks,
CF

The best solution would to buy a new graphics card that can support 2 inputs. Certain applications/tasks (like video editing) don't handle 2nd card well. So I have never ran a PCI card for my second monitor. You'll have to specify what you intend to do with your graphics card for better recomendations of cards that just aren't overkill for your usage. All of my systems use Dr bott connectors & I have never had a problem with them. Depending on what card you buy you may need one or two of the ADC to DVI connectors on the site. Best of luck
http://www.drbott.com/prod/db.lasso?code=0111-DVAD

Display values of a single field in a multiple rows in a table region

Hi Tech-Gurus,
I want to display values of a single field ( which is in a table region) in multiple rows and also need to restrict the values from decimal number. If i click save, then it will throw exception "Decimal not allowed".
xxxxxx
yyyyyy
Reg.No
1234
5678
7654
I need to display the values of REG.NO in different rows like,
1234
5678
7654
and also need to validate as well against Decimal values.
Please help me with the code how i will iterate ?

Hi,
I am assuming you are talking about displaying substrings from the Reg No in different rows. For this you would need to write a query which identifies the substrings and creates a separate row for each (ensure you choose values for all other columns in the table row). Kindly let me know if the understanding is incorrect.
To validate against decimal value you can use the java code by checking the difference of the number and the number on which modulus has been applied. Hope that helps.
Regards
Sumit

Displaying data from a list into a single field with comma separated values

Hi,
I have a requirement to change a report with an XML structure (simplified version) as below
<Protocol>
<ProtocolNumber>100</ProtocolNumber>
<SiteName>Baxter Building</SiteName>
<ListOfActivity>
<Activity>
<Description>Communication Memo Description.</Description>
<Name>James</Name>
</Activity>
<Activity>
<Description>Visit 4</Description>
<Name>James</Name>
</Activity>
<ListOfActivity/>
</Protocol>
On the report I need to display all the 'Names' for each of the Child (Activities) in a single field at the Parent (Protocol) level, with each Name separated by a comma.
How do I go about getting this to work?
Thanks

Take a look at this: http://blogs.oracle.com/xmlpublisher/entry/inline_grouping
You could do this (ofcourse, you will need to add extra logic to ensure that there is no comma added after the last name..)
<?for-each@inlines:Name?><?.?><?', '?><?end for-each?>
Thanks,
Bipuser

External vga, monitor recognized, still no display

I have a L R60 9461-DXG, with Win7 (32bit) running very fine.
Now trying to use an external monitor (L171p) but nothing works.
While in boot and in combination with Fn+F7 the display doesn't come up (staying in power saving mode).
In Win7 the external connected monitor is recognized and displayed as a L171p, enabling the monitor is possible but again the display doesn't come up.
Is this a driver error or could there be a hardware malfunction?
Installing (Vista) Ati Mobility Radeon X1400 drivers from the L site didn't solve the problem.
Please help.

Not necessarily, but the probability of receiving a solution from other members, who are also using a similar setup, is most likely better here.
edit; grammar
Message Edited by andyP on 06-15-2009 10:36 PM
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

MacBook will not display on external monitor in clamshell mode

System information:
13 in. MacBook (2.4Ghz Intel 2-Core)
10.6.7
External Display connected with Apple DisplayPort VGA adapter
Apple Wireless Keyboard
Generic wireless mouse that connects to a USB stick plugged into the MacBook
This is dirving me nuts because it was working perfectly until about 2 weeks ago. I was following the pocess outlined here. http://support.apple.com/kb/HT3131
Here is what happens now:
MacBook display and external monitor are in mirroring mode. All devices are powered on and plugged in.
Close MacBook lid. MacBook goes to sleep. Blinking LED.
Hit spacebar on the Apple Bluetooth keyboard. The LED changes to steady on. However, the external display never shows the desktop. I've tried Command-F1... nothing.
If I open the lid again... the MacBook goes back to sleep.
I then have to pull out the DisplayPort VGA adapter to wake the MacBook up again.

You could try resetting the SMC and see if that helps.

Display a single field in one table as 2 colums

Hi all..,
I am using oracle 8.1.5.,I have two tables table 1 and table 2, i have one single field
as name how to display it in 2 columns....
here i have given the thing,,,,,
create table table1(user_id int,name varchar(50))
create table table2(host_id int,user_id int)
/* here host_id refers to the user_id in the table1 */
insert into table1 values(1,'Arul')
insert into table1 values (2,'Bala')
insert into table1 values(3,'Karthik')
insert into table1 values(4,'Chandru')
insert into table1 values(5,'Pandi')
insert into table1 values(6,'Sathya')
/* here user_id 1,2 are the hosts, so i assign the users to the host in the table2 as follows*/
insert into table2 values(1,3)
insert into table2 values(1,4)
insert into table2 values(2,5)
insert into table2 values(2,6)
/* here host_id refers to the user_id in the table1 */
now i want to diaplay the host_name and user_name as follows..
i.e.,
=========================
host_name | user_name |
=========================
| |
Arul | Karthik |
Arul | Chandru |
Bala | Pandi |
Bala | Sathya |
==========================
how to do this...
null

You can get the result by this sql as below,
select t1_1.name || '|' || t1_2.name || '|'
from table2 t2
inner join table1 t1_1 on t2.host_id = t1_1.user_id
inner join table1 t1_2 on t2.user_id = t1_2.user_id;You would better post to the 'SQL and PL/SQL forum' in next time.

Single Record Form: fields display with the wrong width

I'm laying out fields on a single record form and notice that the width of the fields displayed when I run the form is less than the width I specify on the "Edit Page Item" page. Here are 3 examples:
field 1: Display as=text, Width=100, Maximum Width=100, ==> displayed width=76
field 2: Display as=text, Width=50, Maximum Width=50, ==> displayed width=46
field 3: Display as=textarea Width=100 Maximum Width=100 ==> displayed width=100
Anyone know why this is happening? I'm trying to layout the form so that it has a pleasing look. It's hard to get the fields lined up when they don't display according to the widths specified.
Edited by: Corvette Captain on Aug 9, 2012 3:21 PM

Hi,
>
I'm laying out fields on a single record form and notice that the width of the fields displayed when I run the form is less than the width I specify on the "Edit Page Item" page. Here are 3 examples:
field 1: Display as=text, Width=100, Maximum Width=100, ==> displayed width=76
field 2: Display as=text, Width=50, Maximum Width=50, ==> displayed width=46
field 3: Display as=textarea Width=100 Maximum Width=100 ==> displayed width=100
Anyone know why this is happening? I'm trying to layout the form so that it has a pleasing look. It's hard to get the fields lined up when they don't display according to the widths specified.
>
Setting the Width of the Page Item sets the input elements "size" attribute. HTML rendering based on size attribute is not a precise as you need. You should use CSS for precision. See Compatibility Notes
Cheers,

How to display 7 values of single field in row wise.

hi,
how to display 7 values of single field in row wise.
thankx in advance.

hi ,
do it like this :
1 Place ur UI element in tranparent container with Layout as Row Data and Layout Data as Row Head Data
2 Ur first UI , which contains the first value as Row Head Data ,
3 Others as Row Data
u can do it with Matrix Data as well
if u want to give space , u can use HORIZONTAL GUTTER and set its width to medium / large / Xlarge
also there is a UI element "INVISIBLE ELEMENT" ,
1 u can use this UI element to provide space between ur other UI elements in the view
2 u can insert a text element as well , and in the Text property of the element press ALT + 0160.
u can give the space bw UIs as desired.
regards,
amit

Single field display on external crt monitor

Similar Messages

Maybe you are looking for