Single folder multiple Author scenario in KM

Hi Every One,
I have tried to configure Single folder multiple Author scenario in KM. i have done all configurations Given in Following document but i haven't Succeeded. Please help me Out.
Configuration Document like:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1f74d7c0-0d01-0010-50b1-9810a1584b00
Regards
Sridhar.

Hi All,
Sorry for the previous post. Let me explain the scenario in brief..
We need to upload a document to a particular folder in KM and assign Permissions to the same. Say For example, we have 100 users and a admin user. The uplaoded file by a user should not be viewed by other 99 users, the admin & the user who uploaded the doc can have full control over it. Similarly the case should be generated for the other 99 users.
We tried to uplod the document and assign permnissions manually. But i know this is not the best way to approach this requirement.
What should be the best solution to assign permissions to the uploaded document?
Regards,
Sridhar

Similar Messages

How to Implement a Single Folder - Multiple Authors Scenario für NW 7.3?

Hello,
is a version "How to Implement a Single Folder - Multiple Authors Scenario" for NetWeaver 7.3 planned?
Best regards,
Arnold Gallemann

Hi Detlev,
thanks a lot for sharing your work!
Due to the reason we need a different configuration in KM, I changed e.g. some values in the .cc.xml and .co.xml files. I rebuild the project and checked the created EAR file. I noticed that the ConfigArchive file in EAR file still has the old values. It seems that SAP NetWeaver Developer Studio 7.3 is not recognizing in a portal application project the configuration of the src.config folder anymore. To test this, I removed the initial provided ConfigArchive in the folder dist\PORTAL-INF\config\ from your project. I rebuild it and the ConfigArchive in the EAR file wasnu2019t included.
I found in the documentation (http://help.sap.com/saphelp_nw73/helpdata/de/42/60aec0032c1422e10000000a114cbd/frameset.htm) the SAP Note 1572813, which would describe how to use KMC wizards in SAP NetWeaver Developer Studio 7.3. But the article is currently not released to public.
In addition I have discovered, that it is possible to include the src.config folder in the build process if the project is set up as a development component (see for details bullet point Optionally of http://help.sap.com/saphelp_nw73/helpdata/de/42/60aec0032c1422e10000000a114cbd/frameset.htm). This works. But later on I am facing another problem: I am missing the entry KMC-CM to add it as a dependency for the development component.
Best regards
Mario

NAC in a Single WLC, multiple site scenario

Hello:
I have the following network and would like to know whether I need a WLC per site.
There are 3 different sites with the followig equipment:
Main site: one NAC server (CAS), one NAC manager, several APs
Branch 1: one NAC server (CAS), several APs.
Branch 2: one NAC server (CAS), one WLC, several APs.
I´ve read that in order to function properly, WLC and CAS server must be L2 adjacent. Does that mean that I need one WLC per site, or it means that WLC + CAS in Branch2 would control wireless APs users in all three locations, as long as they (WLC + CAS in Branch2) are both L2 adjacents?
Any advice would be very appreciated.
Best regards and thanks in advance.
Faimy.

We now support L3 wireless oob, please take a look at the doc posted below:
http://www.cisco.com/en/US/docs/security/nac/appliance/release_notes/48/482rn.html#wp1154100
Thanks,
Tarik Admani

Best Practices for multiple authors using single project?

We are having many issues, particularly with moving, renaming, and multiple check out warnings. We have a single project with many authors and it seems like RH is not designed to work that way. There is an article in the RH devnet-archive in an article entitled "Sharing RoboHelp Project Among Multiple Authors" that says"
"At first there may be the temptation to let every author work on every file in a project. This is certainly not a best practice. Regardless of source contraol, it is always best to designate certain authors as owning certain content-related sections, folders, or topics within a project -particulary at the folder level."
This statement, and our experience seems to indicate that RH is not a true CMS as we had envisioned. What are the best practices for this scenario to avoid stepping on each others toes and having problems with source control.

I have moved this to the source control forum for the gurus there to answer.
Meantime I must admit I read that statement the same way as you first time. However, on rereading I think what the author is saying is not that what you want cannot be done, rather it is best practice to guide authors to work in discrete areas.
I will leave it to the author or another guru to give you a more complete answer.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Receive Pipeline In Decoder Stage to Extract Single Or Multiple Files From A Zipped Folder In Biztalk Server 2010

Hi,
I need help in developing a customized pipeline for the Decoder Stage.
Requirement : Extract single or multiple files from a zipped folder with any format and extension (X12/EDIFACT/Flat/XML) and send to Disassemble stage for further action.
Need Urgent help.
Any suggestion or help is much appreciated.
Thanks & Best Regards

Hi Siddharth,
Have look at article: BizTalk Server 2010: Processing Zip Message Having Multiple Type
Files and http://tech-findings.blogspot.com/2013/10/custom-zipreceivepipeline-to-unzip.html
Maheshkumar S Tiwari|User
Page|Blog|BizTalk
Server : Scheduling Orchestration using Trigger Message

If project is on C, how do multiple authors share?

Hi all,
I've been a lone author, and soon I will not be. We're going
to be installing either RoboSource Control 3 or a third-party
version control system in order for all four of us to access and
work in the same help projects at the same time. However, I'm
rather confused about something. I keep reading in the user forum
that each author still needs to have the help project on their C
drive and run it and RoboHelp from there, but you check in/out
topics from the server. But how do the other parts of the help
project work, like the TOC and index?
Is the help project merely a "manager," and
the TOC and index and all of those other bells and whistles outside
of the individual html topics stored in separate files out on the
server, which you check-in/out every time you make changes to the
TOC or index? If that's so, what happens if one author makes
changes to the index from Topic Properties (Index tab), and another
author is modifying the index at the same time?
I don't really understand how this works, and the Adobe
articles do a poor job of really explaining how this works.
I appreciate any help or explanations!
Lisa

Hi Lisa
Of course I'm not Gravenstein.
But your summation is incorrect. RoboSource Control does
indeed allow multiple authors to work simultaneously on a project.
I stand to be corrected, but I think the way RoboSource
Control works is by essentially locking things at the folder level.
So assume you have a project with many different folders. You
choose a file inside folder A and other files inside that folder
(but no sub folders) are locked until you release (or check in) the
file you were working on.
Does this make more sense?
Normally all the source files are on the server. But
copies exist on your PC in what is typically called the
*Working Folder*. As you check files in and out, they are copied
back and forth automatically to and from your hard drive. So you
work locally always, but the source control software manages the
server bit.
Hopefully something here was helpful... Rick

Multiple authors for a Book

In the below example, the book titled 'Collapse of the Dollar' has multiple authors.
create table books
(surrId number(5),
book_id number(7),
isbn number (10),
title varchar2(100) ,
Author varchar2(100)
insert into books values (1, 457, 8478, 'Perilous Power' , 'Noam Chomsky');
insert into books values (2, 458, 2345, 'Macbeth' , 'Shakespeare');
insert into books values (3, 459, 6789, 'Collapse of the Dollar' , 'James Turk');
insert into books values (4, 459, 6789, 'Collapse of the Dollar' , 'John Rubino');
col title format a35
col author format a15
col title format a15
set lines 200
SQL> select * from books;
    SURRID    BOOK_ID       ISBN TITLE                               AUTHOR
         1        457       8478 Perilous Power                      Noam Chomsky
         2        458       2345 Macbeth                             Shakespeare
         3        459       6789 Collapse of the Dollar              James Turk
         4        459       6789 Collapse of the Dollar              John RubinoI need to write a query whiich returns book details but it should identify records (ie. Titles) with multiple authors and return the record with Authors separated with pipe ('|') like (no need of SURRID column )
expected output
      -- no need to retrieve surrogate ID
BOOK_ID       ISBN TITLE                               AUTHOR
      457       8478 Perilous Power                      Noam Chomsky
      458       2345 Macbeth                             Shakespeare
      459       6789 Collapse of the Dollar              James Turk|John Rubino
      Related question on the above Table design (Create table DDL shown above):
A table storing book details can only be designed like above. Right ? I mean, the duplication of records for one book because of multiple authors cannot be avoided. Right ?
One wonders how Amazon has desined its books table :)

Hi,
Pete_Sg1 wrote:
I need to write a query whiich returns book details but it should identify records (ie. Titles) with multiple authors and return the record with Authors separated with pipe ('|') like (no need of SURRID column )Get there : {message:id=9360005}
and scroll down to "string aggregation"
Pete_Sg1 wrote:
A table storing book details can only be designed like above. Right ? I mean, the duplication of records for one book because of multiple authors cannot be avoided. Right ? I would have had a table for books, and a separate one for authors, and a 3rd one for their relations :
create table books
book_id integer,
title varchar2(100),
etc...
create table authors
author_id integer,
name varchar2(100),
etc...
create table book_authors
book_id integer,
author_id integer
);You could also have only 2 tables book and authors (with authors table having a fk column to book_id).
It would depends if the author is supposed to remain unique throught different books.
- The 3 tables model would allow a single update on author information to be automatically "propagated" to all book he participed in.
- The 2 tables model would allow to have different information for each participation of the author to different books (but would certainly "duplicate" part of the data about the author)
One can also have even more tables to totally avoid data "duplication".

SAP CRM Multiple Backend Scenario with Solution Manager

Dear Experts,
We are implementing CRM Middleware - Multiple Backend Scenario (MEP / MBE Concept) in our client landscape for SAP CRM on HANA (Ehp3)
set-up.
And If any one of you have already implemented MEP Scenario in the SAP CRM Landscape, Could you please help us to provide with the Configuration Steps / Documents, so that we can proceed further.
Below are the following Queries:
For Customizing Adapter Object:
1) Does MEP Concept support the Customizing Adapter object to download from more than one ECC System to single CRM System.
    If Yes, Could you please provide the Configuration steps or Procedure to download the customizing data.
For Master Adapter Object:
2) The Adapter objects for Master Data like Customer and Materials are technically supported under MEP for the data exchange.
     However, is it possible to download the Equipments Master Data from more than one ECC System to single CRM System?
     If Yes, Could you please provide the steps or Procedure to download the Equipments Master Data.
And please provide if you have done the Solution Manager Configuration mapping for MEP Scenario, which is required for the maintenance and transfer of customizing mappings to CRM and Mapbox.
Thanks,
Mohanram.

Hi Alagammai,
    We are also implementing CRM Middleware - Multiple Backend Scenario (MEP / MBE Concept) in our client landscape for SAP CRM on HANA (Ehp3) set-up.
Required some Information on the below Query.
For Customizing Adapter Object:
1) Does MEP Concept support the Customizing Adapter object to download from more than one ECC System to single CRM System.
    If Yes, Could you please provide the Configuration steps or Procedure to download the customizing data.
For Master Adapter Object:
2) The Adapter objects for Master Data like Customer and Materials are technically supported under MEP for the data exchange.
     However, is it possible to download the Equipments Master Data from more than one ECC System to single CRM System?
     If Yes, Could you please provide the steps or Procedure to download the Equipments Master Data.
And please provide if you have done the Solution Manager Configuration mapping for MEP Scenario, which is required for the maintenance and transfer of customizing mappings to CRM and Mapbox.
Thanks,
Mohanram.
7829055537

File to Multiple Idocs scenario. Pls help

Hi All,
For Single File to Multiple Idocs scenario i am referring blog --
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
Suppose my source file is
AAA, BBB,CCC
111,222,333
ZZZ,ZZZ,ZZZ
I want to make 2 IDOCS for the first 2 records (AAA, BBB,CCC   and 111,222,333)
and do not want to make IDOC for the 3rd record -- how to achive this.
Regards

Hi,
If the condition is like, for 'AAA' and '111', IDocs to be generated, then do as follows.
If IDOCs are of same type.
1. Value
> Equals -
> createIf -
> IDOC
   Constant('AAA')
2. Value
> Equals -
> createIf -
> IDOC
   Constant('111')
3. Value
> Equals -
> not -
> createIf -
> IDOC
   Constant('ZZZ')
If 2 IDocs are of differnet types,
create different mapping programs with same logic.
If 2 IDocs are to be generated based on the record no in the file rather than the first field value, i think you can go for Global container.
Refer these,
[http://help.sap.com/saphelp_nw04/helpdata/en/ee/bf9640dc522f28e10000000a1550b0/frameset.htm]
[http://help.sap.com/saphelp_nw04/helpdata/EN/49/1ebc6111ea2f45a9946c702b685299/content.htm ]
[http://help.sap.com/saphelp_erp2004/helpdata/en/75/8e0f8f3b0c2e4ea5f8d8f9faa9461a/frameset.htm]
thanks.
Edited by: P.Ravi Varma on Apr 22, 2009 10:27 AM

File-XI-multiple IDoc Scenario

Hi there -
I am working on single File-XI-multiple IDoc Scenario and have following questions:
(please keep in mind that there is already an existing multiple IDocs-XI-single File scenario between the same systems)
1. Please provide any detailed step by step documentation from end-to-end.
2. I am thinking it's compulsory to use BPM, is there any way to aviod?
3. Is it possible to update existing IDocs in R/3 directly from the data from XI?
Thanks everyone in advance...
Pat

HI,
Pls go thru following links-
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Single inbound file -> XI -> Multiple IDOCs in SAP
One file for multiple IDOCs
Hope this helps..
Regards,
Moorthy

JDBC to Multiple IDOC scenario

Dear Experts,
My Scenario is JDBC to Multiple IDOC scenario.
I am reading 100 records and generating 100 IDOC's at the target ECC system, the problem which I am facing is if I have any issue with 1 record the total message gets failed in SXMB_MONI due to mapping failure.
So again I need to reset all 100 records in my source database and I should reprocess the same.
Is there any way to process the 99 and fail only one record which causes error.
Is Stored procedure will fix this issue or do I need to use BPM for this to achieve.
Please advice.
Thanks,
--Sai

Hi Sai,
As you are selecting 100 records in one go, all the records will come as a single message in PI.
Please find below my suggestion for this issue.
1. Selecting one record per message will not be efficient. So please do not use it.
2. Create a secondary sctucture. Generate it only if there is an error in the record. You may set up an alert for that message. So if any error occurs, other 99 idocs can go normally, while you will get an aleart for the failed record.
3. Another option is to create an idoc for error record also. You can do this by providing some default values in place of error fields. You can then monitor such idocs in ECC.
Personally, i feel 2nd option is the best. Let me know if you need more information on this.
Regards,
Gavaksh

Role of clients in CRM Multiple Backend Scenario

Does the CRM Multiple Backend Scenario only apply to a single client pointed to multiple CRM or ERP systems.
All the relevant tables are client dependent in CRM 2007 and the client independent ones use logical destinations which can easily be pointed todifferent clients.
We want to point different clients on a CRM or ERP system to multiple back ends, but each client will only have a single client that it points to.
For example
CRM (dev) client 100 is connected to ERP (sandbox) client 100
CRM (dev) client 200 is connected to ERP (dev) client 100
CRM (test) client 100 is connected to ERP (qa) client 100
CRM (qa) client 100 is connected to ERP (qa) client 200
This will only be in the development and qa systems. Production will be a single system and client on each side.
Regards,
Aubrey Smith

Aubrey,
Development will happen in only one client system. This can later be moved to Quality and further to production. All customization will also be moved same way. It may also happen that your development is cross client so if you do development on 100 , it will be available on 200 client as well.
Regards,
Harshit

Multiple Backend Scenario with SolMan

Hi Gurus,
i need the information about the multiple backend scenarios implementation with SolMan. In the Note 1084315 - Consulting: Information about the multiple backend scenario, there is the Way decribed:
You can find documentation about this in Solution Manager under 'Basic Settings for SAP CRM' -> 'Multiple Systems Exchange Projects: Multiple Backends'.
But i can not find it in Solution Manager, where can it be?
Thanks and Regards,
Stefan

Hi Alagammai,
    We are also implementing CRM Middleware - Multiple Backend Scenario (MEP / MBE Concept) in our client landscape for SAP CRM on HANA (Ehp3) set-up.
Required some Information on the below Query.
For Customizing Adapter Object:
1) Does MEP Concept support the Customizing Adapter object to download from more than one ECC System to single CRM System.
    If Yes, Could you please provide the Configuration steps or Procedure to download the customizing data.
For Master Adapter Object:
2) The Adapter objects for Master Data like Customer and Materials are technically supported under MEP for the data exchange.
     However, is it possible to download the Equipments Master Data from more than one ECC System to single CRM System?
     If Yes, Could you please provide the steps or Procedure to download the Equipments Master Data.
And please provide if you have done the Solution Manager Configuration mapping for MEP Scenario, which is required for the maintenance and transfer of customizing mappings to CRM and Mapbox.
Thanks,
Mohanram.
7829055537

Multiple Author Check In/Check Out Problems

Using RoboSource, I have issues with multiple author sharing; this may be an IT setup issue or user error, but frequently I will open a project that has been worked on and checked in by another author and the files show as still checked out both in RoboHelp and RoboSource, even though on her station they show as checked in in both applications. I then have to open and jigger around in RoboSource to get everything back in a status I can work with. Does anyone know what setting might be involved or other problem that causes this? I noticed someone had a recent post on a similar problem but then posted that she had experienced a more or less "spontaneous remission". No such luck here - if anyone has a clue, I would be very grateful.

Hello APinPV,
I'm new to the forums, but have been using RH in a multi author environment for a couple years now. I experienced a similar situation between me and another author. I saw files checked in, but he saw them as checked out and so did RS. Turned out I had configured my Source Control on my own PC incorrectly, and my local path somehow had changed midstream and I ended up with 2 folders containing the same source documents, one within the other! Though her scenario may not be exactly the same, it could still be the configuration that is the issue. I would have her delete her local copy, verify her local path settings are correct in RoboSource, and redownload the project as if it was her first time using it. That is what worked for me.
Leah

Securing several PDF's within a single folder

Hi,
Is it possible to use a batch file to protect several PDF's, stored in a single folder, with a single Policy?
Thanks for your help
-Owen..

When using Acrobat 8.1 to secure documents through the Adobe Document Center, you can use the batch processing capabilities of Acrobat to secure multiple documents at the same time. The batch processing option is found under the Advanced | Document Processing | Batch Processing menu. You will need to define a new sequence for securing document and choose the Adobe LiveCycle Policy Server as the Security Method and the Policy you want to apply to the documents. Also when specifying the sequence select a source folder where all the files to be protected are located and a target folder where the secured versions of the file
dog breeds should be placed. Once you have specified the sequence you can run the sequence and this will secure all the files in the selected folder.
These proposals are helpful to us, I'll see to it, thank, Mark Bunter.
http://www.dogbreedss.org

Single folder multiple Author scenario in KM

Similar Messages

Maybe you are looking for